@@ -628,6 +628,19 @@ static int pnv_i2c_dt_xscom(PnvXScomInterface *dev, void *fdt,
return 0;
}
+static void pnv_i2c_sys_reset(void *dev)
+{
+ int port;
+ PnvI2C *i2c = PNV_I2C(dev);
+
+ pnv_i2c_reset(dev);
+
+ /* reset all buses connected to this i2c controller */
+ for (port = 0; port < i2c->num_busses; port++) {
+ bus_cold_reset(BUS(i2c->busses[port]));
+ }
+}
+
static void pnv_i2c_realize(DeviceState *dev, Error **errp)
{
PnvI2C *i2c = PNV_I2C(dev);
@@ -648,7 +661,7 @@ static void pnv_i2c_realize(DeviceState *dev, Error **errp)
fifo8_create(&i2c->fifo, PNV_I2C_FIFO_SIZE);
- qemu_register_reset(pnv_i2c_reset, dev);
+ qemu_register_reset(pnv_i2c_sys_reset, dev);
qdev_init_gpio_out(DEVICE(dev), &i2c->psi_irq, 1);
}
The QEMU I2C buses and devices use the resettable interface for resetting while the PNV I2C controller and parent buses and devices have not yet transitioned to this new interface and use the old reset strategy. This was preventing the I2C buses and devices wired to the PNV I2C controller from being reset. The short term fix for this is to have the PNV I2C Controller's reset function explicitly call the resettable interface function, bus_cold_reset(), on all child I2C buses. The long term fix should be to transition all PNV parent devices and buses to use the resettable interface so that all child buses and devices are automatically reset. Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> --- hw/ppc/pnv_i2c.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)