diff mbox series

[v3,4/9] hw/mem/cxl_type3: Add support to create DC regions to type3 memory devices

Message ID 20231107180907.553451-5-nifan.cxl@gmail.com
State New
Headers show
Series Enabling DCD emulation support in Qemu | expand

Commit Message

fan Nov. 7, 2023, 6:07 p.m. UTC 
From: Fan Ni <fan.ni@samsung.com>

With the change, when setting up memory for type3 memory device, we can
create DC regions.
A property 'num-dc-regions' is added to ct3_props to allow users to pass the
number of DC regions to create. To make it easier, other region parameters
like region base, length, and block size are hard coded. If needed,
these parameters can be added easily.

With the change, we can create DC regions with proper kernel side
support as below:

region=$(cat /sys/bus/cxl/devices/decoder0.0/create_dc_region)
echo $region> /sys/bus/cxl/devices/decoder0.0/create_dc_region
echo 256 > /sys/bus/cxl/devices/$region/interleave_granularity
echo 1 > /sys/bus/cxl/devices/$region/interleave_ways

echo "dc0" >/sys/bus/cxl/devices/decoder2.0/mode
echo 0x40000000 >/sys/bus/cxl/devices/decoder2.0/dpa_size

echo 0x40000000 > /sys/bus/cxl/devices/$region/size
echo  "decoder2.0" > /sys/bus/cxl/devices/$region/target0
echo 1 > /sys/bus/cxl/devices/$region/commit
echo $region > /sys/bus/cxl/drivers/cxl_region/bind

Signed-off-by: Fan Ni <fan.ni@samsung.com>
---
 hw/mem/cxl_type3.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
diff mbox series

Patch

diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 754c885cd1..2d67d2015c 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -721,6 +721,36 @@  static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
     }
 }
 
+static int cxl_create_dc_regions(CXLType3Dev *ct3d)
+{
+    int i;
+    uint64_t region_base = 0;
+    uint64_t region_len =  2 * GiB;
+    uint64_t decode_len = 8; /* 8*256MB */
+    uint64_t blk_size = 2 * MiB;
+    CXLDCDRegion *region;
+
+    if (ct3d->hostvmem) {
+        region_base += ct3d->hostvmem->size;
+    }
+    if (ct3d->hostpmem) {
+        region_base += ct3d->hostpmem->size;
+    }
+    for (i = 0; i < ct3d->dc.num_regions; i++) {
+        region = &ct3d->dc.regions[i];
+        region->base = region_base;
+        region->decode_len = decode_len;
+        region->len = region_len;
+        region->block_size = blk_size;
+        /* dsmad_handle is set when creating cdat table entries */
+        region->flags = 0;
+
+        region_base += region->len;
+    }
+
+    return 0;
+}
+
 static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
 {
     DeviceState *ds = DEVICE(ct3d);
@@ -789,6 +819,10 @@  static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
         g_free(p_name);
     }
 
+    if (cxl_create_dc_regions(ct3d)) {
+        return false;
+    }
+
     return true;
 }
 
@@ -1108,6 +1142,7 @@  static Property ct3_props[] = {
     DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL),
     DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename),
     DEFINE_PROP_UINT16("spdm", CXLType3Dev, spdm_port, 0),
+    DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0),
     DEFINE_PROP_END_OF_LIST(),
 };