new file mode 100644
@@ -0,0 +1,876 @@
+/*
+ * HP-PARISC Astro/Pluto/Ike/REO system bus adapter (SBA)
+ * with Elroy PCI bus (LBA) adapter emulation
+ * Found in C3000 and similar machines
+ *
+ * (C) 2023 by Helge Deller <deller@gmx.de>
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ * Chip documentation is available at:
+ * https://parisc.wiki.kernel.org/index.php/Technical_Documentation
+ *
+ * TODO:
+ * - All user-added devices are currently attached to the first
+ * Elroy (PCI bus) only for now. To fix this additional work in
+ * SeaBIOS and this driver is needed. See "user_creatable" flag below.
+ * - GMMIO (Greater than 4 GB MMIO) register
+ */
+
+#define TYPE_ASTRO_IOMMU_MEMORY_REGION "astro-iommu-memory-region"
+
+#include "qemu/osdep.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "hw/irq.h"
+#include "hw/pci/pci_device.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/qdev-properties.h"
+#include "hw/pci-host/astro.h"
+#include "hw/hppa/hppa_hardware.h"
+#include "migration/vmstate.h"
+#include "trace.h"
+#include "qom/object.h"
+
+/*
+ * Helper functions
+ */
+
+static uint64_t mask_32bit_val(hwaddr addr, unsigned size, uint64_t val)
+{
+ if (size == 8) {
+ return val;
+ }
+ if (addr & 4) {
+ val >>= 32;
+ } else {
+ val = (uint32_t) val;
+ }
+ return val;
+}
+
+static void put_val_in_int64(uint64_t *p, hwaddr addr, unsigned size,
+ uint64_t val)
+{
+ if (size == 8) {
+ *p = val;
+ } else if (size == 4) {
+ if (addr & 4) {
+ *p = ((*p << 32) >> 32) | (val << 32);
+ } else {
+ *p = ((*p >> 32) << 32) | (uint32_t) val;
+ }
+ }
+}
+
+static void put_val_in_arrary(uint64_t *array, hwaddr start_addr,
+ hwaddr addr, unsigned size, uint64_t val)
+{
+ int index;
+
+ index = (addr - start_addr) / 8;
+ put_val_in_int64(&array[index], addr, size, val);
+}
+
+
+/*
+ * The Elroy PCI host bridge. We have at least 4 of those under Astro.
+ */
+
+static MemTxResult elroy_chip_read_with_attrs(void *opaque, hwaddr addr,
+ uint64_t *data, unsigned size,
+ MemTxAttrs attrs)
+{
+ MemTxResult ret = MEMTX_OK;
+ ElroyState *s = opaque;
+ uint64_t val = -1;
+ int index;
+
+ switch ((addr >> 3) << 3) {
+ case 0x0008:
+ val = 0x6000005; /* func_class */
+ break;
+ case 0x0058:
+ /*
+ * Scratch register, but firmware initializes it with the
+ * PCI BUS number and Linux/HP-UX uses it then.
+ */
+ val = s->pci_bus_num;
+ /* Upper byte holds the end of this bus number */
+ val |= s->pci_bus_num << 8;
+ break;
+ case 0x0080:
+ val = s->arb_mask; /* set ARB mask */
+ break;
+ case 0x0108:
+ val = s->status_control;
+ break;
+ case 0x200 ... 0x250 - 1: /* LMMIO, GMMIO, WLMMIO, WGMMIO, ... */
+ index = (addr - 0x200) / 8;
+ val = s->mmio_base[index];
+ break;
+ case 0x0680:
+ val = s->error_config;
+ break;
+ case 0x0688:
+ val = 0; /* ERROR_STATUS */
+ break;
+ case 0x0800: /* IOSAPIC_REG_SELECT */
+ val = s->iosapic_reg_select;
+ break;
+ case 0x0808:
+ val = UINT64_MAX; /* XXX: tbc. */
+ g_assert_not_reached();
+ break;
+ case 0x0810: /* IOSAPIC_REG_WINDOW */
+ switch (s->iosapic_reg_select) {
+ case 0x01: /* IOSAPIC_REG_VERSION */
+ val = (32 << 16) | 1; /* upper 16bit holds max entries */
+ break;
+ default:
+ if (s->iosapic_reg_select < ARRAY_SIZE(s->iosapic_reg)) {
+ val = s->iosapic_reg[s->iosapic_reg_select];
+ } else {
+ trace_iosapic_reg_read(s->iosapic_reg_select, size, val);
+ g_assert_not_reached();
+ }
+ }
+ trace_iosapic_reg_read(s->iosapic_reg_select, size, val);
+ break;
+ default:
+ trace_elroy_read(addr, size, val);
+ g_assert_not_reached();
+ }
+ trace_elroy_read(addr, size, val);
+
+ /* for 32-bit accesses mask return value */
+ val = mask_32bit_val(addr, size, val);
+
+ trace_astro_chip_read(addr, size, val);
+ *data = val;
+ return ret;
+}
+
+
+static MemTxResult elroy_chip_write_with_attrs(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size,
+ MemTxAttrs attrs)
+{
+ ElroyState *s = opaque;
+ int i;
+
+ trace_elroy_write(addr, size, val);
+
+ switch ((addr >> 3) << 3) {
+ case 0x080:
+ put_val_in_int64(&s->arb_mask, addr, size, val);
+ break;
+ case 0x0108:
+ put_val_in_int64(&s->status_control, addr, size, val);
+ break;
+ case 0x200 ... 0x250 - 1: /* LMMIO, GMMIO, WLMMIO, WGMMIO, ... */
+ put_val_in_arrary(s->mmio_base, 0x200, addr, size, val);
+ break;
+ case 0x0680:
+ put_val_in_int64(&s->error_config, addr, size, val);
+ break;
+ case 0x0800: /* IOSAPIC_REG_SELECT */
+ s->iosapic_reg_select = val;
+ break;
+ case 0x0810: /* IOSAPIC_REG_WINDOW */
+ trace_iosapic_reg_write(s->iosapic_reg_select, size, val);
+ if (s->iosapic_reg_select < ARRAY_SIZE(s->iosapic_reg)) {
+ s->iosapic_reg[s->iosapic_reg_select] = val;
+ } else {
+ g_assert_not_reached();
+ }
+ break;
+ case 0x0840: /* IOSAPIC_REG_EOI */
+ val = le64_to_cpu(val);
+ val &= 63;
+ for (i = 0; i < ELROY_IRQS; i++) {
+ if ((s->iosapic_reg[0x10 + 2 * i] & 63) == val) {
+ s->ilr &= ~(1ull << i);
+ }
+ }
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ return MEMTX_OK;
+}
+
+static const MemoryRegionOps elroy_chip_ops = {
+ .read_with_attrs = elroy_chip_read_with_attrs,
+ .write_with_attrs = elroy_chip_write_with_attrs,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+
+/* Unlike pci_config_data_le_ops, no check of high bit set in config_reg. */
+
+static uint64_t elroy_config_data_read(void *opaque, hwaddr addr, unsigned len)
+{
+ uint64_t val;
+
+ PCIHostState *s = opaque;
+ val = pci_data_read(s->bus, s->config_reg | (addr & 3), len);
+ trace_elroy_pci_config_data_read(s->config_reg | (addr & 3), len, val);
+ return val;
+}
+
+static void elroy_config_data_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned len)
+{
+ PCIHostState *s = opaque;
+ pci_data_write(s->bus, s->config_reg | (addr & 3), val, len);
+ trace_elroy_pci_config_data_write(s->config_reg | (addr & 3), len, val);
+}
+
+static const MemoryRegionOps elroy_config_data_ops = {
+ .read = elroy_config_data_read,
+ .write = elroy_config_data_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static uint64_t elroy_config_addr_read(void *opaque, hwaddr addr, unsigned len)
+{
+ ElroyState *s = opaque;
+ return s->config_reg_elroy;
+}
+
+static void elroy_config_addr_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned len)
+{
+ PCIHostState *s = opaque;
+ ElroyState *es = opaque;
+ es->config_reg_elroy = val; /* keep a copy of original value */
+ s->config_reg = val;
+}
+
+static const MemoryRegionOps elroy_config_addr_ops = {
+ .read = elroy_config_addr_read,
+ .write = elroy_config_addr_write,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 8,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+
+/*
+ * A subroutine of astro_translate_iommu that builds an IOMMUTLBEntry using the
+ * given translated address and mask.
+ */
+static bool make_iommu_tlbe(hwaddr addr, hwaddr taddr, hwaddr mask,
+ IOMMUTLBEntry *ret)
+{
+ hwaddr tce_mask = ~((1ull << 12) - 1);
+ ret->target_as = &address_space_memory;
+ ret->iova = addr & tce_mask;
+ ret->translated_addr = taddr & tce_mask;
+ ret->addr_mask = ~tce_mask;
+ ret->perm = IOMMU_RW;
+ return true;
+}
+
+/* Handle PCI-to-system address translation. */
+static IOMMUTLBEntry astro_translate_iommu(IOMMUMemoryRegion *iommu,
+ hwaddr addr,
+ IOMMUAccessFlags flag,
+ int iommu_idx)
+{
+ AstroState *s = container_of(iommu, AstroState, iommu);
+ IOMMUTLBEntry ret = {
+ .target_as = &address_space_memory,
+ .iova = addr,
+ .translated_addr = 0,
+ .addr_mask = ~(hwaddr)0,
+ .perm = IOMMU_NONE,
+ };
+ hwaddr pdir_ptr, index, a, ibase;
+ hwaddr addr_mask = 0xfff; /* 4k translation */
+ uint64_t entry;
+
+#define IOVP_SHIFT 12 /* equals PAGE_SHIFT */
+#define PDIR_INDEX(iovp) ((iovp) >> IOVP_SHIFT)
+#define IOVP_MASK PAGE_MASK
+#define SBA_PDIR_VALID_BIT 0x8000000000000000ULL
+
+ /* "range enable" flag cleared? */
+ if ((s->tlb_ibase & 1) == 0) {
+ make_iommu_tlbe(addr, addr, addr_mask, &ret);
+ return ret;
+ }
+
+ a = addr;
+ ibase = s->tlb_ibase & ~1ULL;
+ if ((a & s->tlb_imask) != ibase) {
+ /* do not translate this one! */
+ make_iommu_tlbe(addr, addr, addr_mask, &ret);
+ return ret;
+ }
+ index = PDIR_INDEX(a);
+ pdir_ptr = s->tlb_pdir_base + index * sizeof(entry);
+ entry = ldq_le_phys(&address_space_memory, pdir_ptr);
+ if (!(entry & SBA_PDIR_VALID_BIT)) { /* I/O PDIR entry valid ? */
+ g_assert_not_reached();
+ goto failure;
+ }
+ entry &= ~SBA_PDIR_VALID_BIT;
+ entry >>= IOVP_SHIFT;
+ entry <<= 12;
+ entry |= addr & 0xfff;
+ make_iommu_tlbe(addr, entry, addr_mask, &ret);
+ goto success;
+
+ failure:
+ ret = (IOMMUTLBEntry) { .perm = IOMMU_NONE };
+ success:
+ return ret;
+}
+
+static AddressSpace *elroy_pcihost_set_iommu(PCIBus *bus, void *opaque,
+ int devfn)
+{
+ ElroyState *s = opaque;
+ return &s->astro->iommu_as;
+}
+
+/*
+ * Encoding in IOSAPIC:
+ * base_addr == 0xfffa0000, we want to get 0xa0ff0000.
+ * eid 0x0ff00000 -> 0x00ff0000
+ * id 0x000ff000 -> 0xff000000
+ */
+#define SWIZZLE_HPA(a) \
+ ((((a) & 0x0ff00000) >> 4) | (((a) & 0x000ff000) << 12))
+#define UNSWIZZLE_HPA(a) \
+ (((((a) << 4) & 0x0ff00000) | (((a) >> 12) & 0x000ff000) | 0xf0000000))
+
+/* bits in the "low" I/O Sapic IRdT entry */
+#define IOSAPIC_IRDT_DISABLE 0x10000 /* if bit is set, mask this irq */
+#define IOSAPIC_IRDT_PO_LOW 0x02000
+#define IOSAPIC_IRDT_LEVEL_TRIG 0x08000
+#define IOSAPIC_IRDT_MODE_LPRI 0x00100
+
+#define CPU_IRQ_OFFSET 2
+
+static void elroy_set_irq(void *opaque, int irq, int level)
+{
+ ElroyState *s = opaque;
+ uint32_t bit;
+ uint32_t old_ilr = s->ilr;
+ hwaddr cpu_hpa;
+ uint32_t val;
+
+ val = s->iosapic_reg[0x10 + 2 * irq];
+ cpu_hpa = s->iosapic_reg[0x11 + 2 * irq];
+ /* low nibble of val has value to write into CPU irq reg */
+ bit = 1u << (val & (ELROY_IRQS - 1));
+ cpu_hpa = UNSWIZZLE_HPA(cpu_hpa);
+
+ if (level && (!(val & IOSAPIC_IRDT_DISABLE)) && cpu_hpa) {
+ uint32_t ena = bit & ~old_ilr;
+ s->ilr = old_ilr | bit;
+ if (ena != 0) {
+ stl_be_phys(&address_space_memory, cpu_hpa, val & 63);
+ }
+ } else {
+ s->ilr = old_ilr & ~bit;
+ }
+}
+
+static int elroy_pci_map_irq(PCIDevice *d, int irq_num)
+{
+ int slot = PCI_SLOT(d->devfn);
+
+ assert(irq_num >= 0 && irq_num < ELROY_IRQS);
+ return slot & (ELROY_IRQS - 1);
+}
+
+static void elroy_reset(DeviceState *dev)
+{
+ ElroyState *s = ELROY_PCI_HOST_BRIDGE(dev);
+ int irq;
+
+ /*
+ * Make sure to disable interrupts at reboot, otherwise the Linux kernel
+ * serial8250_config_port() in drivers/tty/serial/8250/8250_port.c
+ * will hang during autoconfig().
+ */
+ s->ilr = 0;
+ for (irq = 0; irq < ELROY_IRQS; irq++) {
+ s->iosapic_reg[0x10 + 2 * irq] = IOSAPIC_IRDT_PO_LOW |
+ IOSAPIC_IRDT_LEVEL_TRIG | (irq + CPU_IRQ_OFFSET) |
+ IOSAPIC_IRDT_DISABLE;
+ s->iosapic_reg[0x11 + 2 * irq] = SWIZZLE_HPA(CPU_HPA);
+ }
+}
+
+static void elroy_pcihost_init(Object *obj)
+{
+ ElroyState *s = ELROY_PCI_HOST_BRIDGE(obj);
+ PCIHostState *phb = PCI_HOST_BRIDGE(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+ /* Elroy config access from CPU. */
+ memory_region_init_io(&s->this_mem, OBJECT(s), &elroy_chip_ops,
+ s, "elroy", 0x2000);
+
+ /* Elroy PCI config. */
+ memory_region_init_io(&phb->conf_mem, OBJECT(phb),
+ &elroy_config_addr_ops, DEVICE(s),
+ "pci-conf-idx", 8);
+ memory_region_init_io(&phb->data_mem, OBJECT(phb),
+ &elroy_config_data_ops, DEVICE(s),
+ "pci-conf-data", 8);
+ memory_region_add_subregion(&s->this_mem, 0x40,
+ &phb->conf_mem);
+ memory_region_add_subregion(&s->this_mem, 0x48,
+ &phb->data_mem);
+
+ /* Elroy PCI bus memory. */
+ memory_region_init(&s->pci_mmio, OBJECT(s), "pci-mmio", UINT64_MAX);
+ memory_region_init_io(&s->pci_io, OBJECT(s), &unassigned_io_ops, obj,
+ "pci-isa-mmio",
+ ((uint32_t) IOS_DIST_BASE_SIZE) / ROPES_PER_IOC);
+
+ phb->bus = pci_register_root_bus(DEVICE(s), "pci",
+ elroy_set_irq, elroy_pci_map_irq, s,
+ &s->pci_mmio, &s->pci_io,
+ PCI_DEVFN(0, 0), ELROY_IRQS, TYPE_PCI_BUS);
+
+ sysbus_init_mmio(sbd, &s->this_mem);
+
+ qdev_init_gpio_in(DEVICE(obj), elroy_set_irq, ELROY_IRQS);
+}
+
+static Property elroy_pcihost_properties[] = {
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static const VMStateDescription vmstate_elroy = {
+ .name = "Elroy",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(hpa, ElroyState),
+ VMSTATE_UINT32(pci_bus_num, ElroyState),
+ VMSTATE_UINT64(config_address, ElroyState),
+ VMSTATE_UINT64(config_reg_elroy, ElroyState),
+ VMSTATE_UINT64(status_control, ElroyState),
+ VMSTATE_UINT64(arb_mask, ElroyState),
+ VMSTATE_UINT64_ARRAY(mmio_base, ElroyState, (0x0250 - 0x200) / 8),
+ VMSTATE_UINT64(error_config, ElroyState),
+ VMSTATE_UINT32(iosapic_reg_select, ElroyState),
+ VMSTATE_UINT64_ARRAY(iosapic_reg, ElroyState, 0x20),
+ VMSTATE_UINT32(ilr, ElroyState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void elroy_pcihost_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = elroy_reset;
+ device_class_set_props(dc, elroy_pcihost_properties);
+ dc->vmsd = &vmstate_elroy;
+ dc->user_creatable = false;
+}
+
+static const TypeInfo elroy_pcihost_info = {
+ .name = TYPE_ELROY_PCI_HOST_BRIDGE,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_init = elroy_pcihost_init,
+ .instance_size = sizeof(ElroyState),
+ .class_init = elroy_pcihost_class_init,
+};
+
+static void elroy_register_types(void)
+{
+ type_register_static(&elroy_pcihost_info);
+}
+
+type_init(elroy_register_types)
+
+
+static ElroyState *elroy_init(int num)
+{
+ DeviceState *dev;
+
+ dev = qdev_new(TYPE_ELROY_PCI_HOST_BRIDGE);
+ dev->id = g_strdup_printf("elroy%d", num);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+
+ return ELROY_PCI_HOST_BRIDGE(dev);
+}
+
+/*
+ * Astro Runway chip.
+ */
+
+static MemTxResult astro_chip_read_with_attrs(void *opaque, hwaddr addr,
+ uint64_t *data, unsigned size,
+ MemTxAttrs attrs)
+{
+ AstroState *s = opaque;
+ MemTxResult ret = MEMTX_OK;
+ uint64_t val = -1;
+ int index;
+
+ switch ((addr >> 3) << 3) {
+ /* R2I registers */
+ case 0x0000: /* ID */
+ val = (0x01 << 3) | 0x01ULL;
+ break;
+ case 0x0008: /* IOC_CTRL */
+ val = s->ioc_ctrl;
+ break;
+ case 0x0010: /* TOC_CLIENT_ID */
+ break;
+ case 0x0030: /* HP-UX 10.20 and 11.11 reads it. No idea. */
+ val = -1;
+ break;
+ case 0x0300 ... 0x03d8: /* LMMIO_DIRECT0_BASE... */
+ index = (addr - 0x300) / 8;
+ val = s->ioc_ranges[index];
+ break;
+ case 0x10200:
+ val = 0;
+ break;
+ case 0x10220:
+ case 0x10230: /* HP-UX 11.11 reads it. No idea. */
+ val = -1;
+ break;
+ case 0x22108: /* IOC STATUS_CONTROL */
+ val = s->ioc_status_ctrl;
+ break;
+ case 0x20200 ... 0x20240 - 1: /* IOC Rope0_Control ... */
+ index = (addr - 0x20200) / 8;
+ val = s->ioc_rope_control[index];
+ break;
+ case 0x20040: /* IOC Rope config */
+ val = s->ioc_rope_config;
+ break;
+ case 0x20050: /* IOC Rope debug */
+ val = 0;
+ break;
+ case 0x20108: /* IOC STATUS_CONTROL */
+ val = s->ioc_status_control;
+ break;
+ case 0x20310: /* IOC_PCOM */
+ val = s->tlb_pcom;
+ /* TODO: flush iommu */
+ break;
+ case 0x20400:
+ val = s->ioc_flush_control;
+ break;
+ /* empty placeholders for non-existent elroys */
+#define EMPTY_PORT(x) case x: case x+8: val = 0; break; \
+ case x+40: case x+48: val = UINT64_MAX; break;
+ EMPTY_PORT(0x30000)
+ EMPTY_PORT(0x32000)
+ EMPTY_PORT(0x34000)
+ EMPTY_PORT(0x36000)
+ EMPTY_PORT(0x38000)
+ EMPTY_PORT(0x3a000)
+ EMPTY_PORT(0x3c000)
+ EMPTY_PORT(0x3e000)
+#undef EMPTY_PORT
+
+ default:
+ trace_astro_chip_read(addr, size, val);
+ g_assert_not_reached();
+ }
+
+ /* for 32-bit accesses mask return value */
+ val = mask_32bit_val(addr, size, val);
+
+ trace_astro_chip_read(addr, size, val);
+ *data = val;
+ return ret;
+}
+
+static MemTxResult astro_chip_write_with_attrs(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size,
+ MemTxAttrs attrs)
+{
+ AstroState *s = opaque;
+
+ trace_astro_chip_write(addr, size, val);
+
+ switch ((addr >> 3) << 3) {
+ case 0x0000: /* ID */
+ break;
+ case 0x0008: /* IOC_CTRL */
+ val &= 0x0ffffff;
+ put_val_in_int64(&s->ioc_ctrl, addr, size, val);
+ break;
+ case 0x0010: /* TOC_CLIENT_ID */
+ break;
+ case 0x0030: /* HP-UX 10.20 and 11.11 reads it. No idea. */
+ break;
+ case 0x0300 ... 0x03d8 - 1: /* LMMIO_DIRECT0_BASE... */
+ put_val_in_arrary(s->ioc_ranges, 0x300, addr, size, val);
+ break;
+ case 0x10200:
+ case 0x10220:
+ case 0x10230: /* HP-UX 11.11 reads it. No idea. */
+ break;
+ case 0x22108: /* IOC STATUS_CONTROL */
+ put_val_in_int64(&s->ioc_status_ctrl, addr, size, val);
+ break;
+ case 0x20200 ... 0x20240 - 1: /* IOC Rope0_Control ... */
+ put_val_in_arrary(s->ioc_rope_control, 0x20200, addr, size, val);
+ break;
+ case 0x20040: /* IOC Rope config */
+ put_val_in_int64(&s->ioc_rope_config, addr, size, val);
+ break;
+ case 0x20300:
+ put_val_in_int64(&s->tlb_ibase, addr, size, val);
+ break;
+ case 0x20308:
+ put_val_in_int64(&s->tlb_imask, addr, size, val);
+ break;
+ case 0x20310:
+ put_val_in_int64(&s->tlb_pcom, addr, size, val);
+ /* TODO: flush iommu */
+ break;
+ case 0x20318:
+ put_val_in_int64(&s->tlb_tcnfg, addr, size, val);
+ break;
+ case 0x20320:
+ put_val_in_int64(&s->tlb_pdir_base, addr, size, val);
+ break;
+ /*
+ * empty placeholders for non-existent elroys, e.g.
+ * func_class, pci config & data
+ */
+#define EMPTY_PORT(x) case x: case x+8: case x+0x40: case x+0x48:
+ EMPTY_PORT(0x30000)
+ EMPTY_PORT(0x32000)
+ EMPTY_PORT(0x34000)
+ EMPTY_PORT(0x36000)
+ EMPTY_PORT(0x38000)
+ EMPTY_PORT(0x3a000)
+ EMPTY_PORT(0x3c000)
+ EMPTY_PORT(0x3e000)
+ break;
+#undef EMPTY_PORT
+
+ default:
+ /* Controlled by astro_chip_mem_valid above. */
+ trace_astro_chip_write(addr, size, val);
+ g_assert_not_reached();
+ }
+ return MEMTX_OK;
+}
+
+static const MemoryRegionOps astro_chip_ops = {
+ .read_with_attrs = astro_chip_read_with_attrs,
+ .write_with_attrs = astro_chip_write_with_attrs,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+static const VMStateDescription vmstate_astro = {
+ .name = "Astro",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(ioc_ctrl, AstroState),
+ VMSTATE_UINT64(ioc_status_ctrl, AstroState),
+ VMSTATE_UINT64_ARRAY(ioc_ranges, AstroState, (0x03d8 - 0x300) / 8),
+ VMSTATE_UINT64(ioc_rope_config, AstroState),
+ VMSTATE_UINT64(ioc_status_control, AstroState),
+ VMSTATE_UINT64(ioc_flush_control, AstroState),
+ VMSTATE_UINT64_ARRAY(ioc_rope_control, AstroState, 8),
+ VMSTATE_UINT64(tlb_ibase, AstroState),
+ VMSTATE_UINT64(tlb_imask, AstroState),
+ VMSTATE_UINT64(tlb_pcom, AstroState),
+ VMSTATE_UINT64(tlb_tcnfg, AstroState),
+ VMSTATE_UINT64(tlb_pdir_base, AstroState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void astro_reset(DeviceState *dev)
+{
+ AstroState *s = ASTRO_CHIP(dev);
+ int i;
+
+ s->ioc_ctrl = 0x29cf;
+ s->ioc_rope_config = 0xc5f;
+ s->ioc_flush_control = 0xb03;
+ s->ioc_status_control = 0;
+ memset(&s->ioc_rope_control, 0, sizeof(s->ioc_rope_control));
+
+ /*
+ * The SBA BASE/MASK registers control CPU -> IO routing.
+ * The LBA BASE/MASK registers control IO -> System routing (in Elroy)
+ */
+ memset(&s->ioc_ranges, 0, sizeof(s->ioc_ranges));
+ s->ioc_ranges[(0x360 - 0x300) / 8] = LMMIO_DIST_BASE_ADDR | 0x01; /* LMMIO_DIST_BASE (SBA) */
+ s->ioc_ranges[(0x368 - 0x300) / 8] = 0xfc000000; /* LMMIO_DIST_MASK */
+ s->ioc_ranges[(0x370 - 0x300) / 8] = 0; /* LMMIO_DIST_ROUTE */
+ s->ioc_ranges[(0x390 - 0x300) / 8] = IOS_DIST_BASE_ADDR | 0x01; /* IOS_DIST_BASE */
+ s->ioc_ranges[(0x398 - 0x300) / 8] = 0xffffff0000; /* IOS_DIST_MASK */
+ s->ioc_ranges[(0x3a0 - 0x300) / 8] = 0x3400000000000000ULL; /* IOS_DIST_ROUTE */
+ s->ioc_ranges[(0x3c0 - 0x300) / 8] = 0xfffee00000; /* IOS_DIRECT_BASE */
+ s->ioc_ranges[(0x3c8 - 0x300) / 8] = 0xffffff0000; /* IOS_DIRECT_MASK */
+ s->ioc_ranges[(0x3d0 - 0x300) / 8] = 0x0; /* IOS_DIRECT_ROUTE */
+
+ s->tlb_ibase = 0;
+ s->tlb_imask = 0;
+ s->tlb_pcom = 0;
+ s->tlb_tcnfg = 0;
+ s->tlb_pdir_base = 0;
+
+ for (i = 0; i < ELROY_NUM; i++) {
+ elroy_reset(DEVICE(s->elroy[i]));
+ }
+}
+
+static void astro_init(Object *obj)
+{
+ AstroState *s = ASTRO_CHIP(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ int i;
+
+ memory_region_init_io(&s->this_mem, OBJECT(s), &astro_chip_ops,
+ s, "astro", 0x40000);
+ sysbus_init_mmio(sbd, &s->this_mem);
+
+ /* Host memory as seen from Elroys PCI side, via the IOMMU. */
+ memory_region_init_iommu(&s->iommu, sizeof(s->iommu),
+ TYPE_ASTRO_IOMMU_MEMORY_REGION, OBJECT(s),
+ "iommu-astro", UINT64_MAX);
+ address_space_init(&s->iommu_as, MEMORY_REGION(&s->iommu),
+ "bm-pci");
+
+ /* Create Elroys (PCI host bus chips). */
+ for (i = 0; i < ELROY_NUM; i++) {
+ static const int elroy_hpa_offsets[ELROY_NUM] = {
+ 0x30000, 0x32000, 0x38000, 0x3c000 };
+ static const char elroy_rope_nr[ELROY_NUM] = {
+ 0, 1, 4, 6 }; /* busnum path, e.g. [10:6] */
+ int addr_offset;
+ ElroyState *elroy;
+ hwaddr map_addr;
+ uint64_t map_size;
+ int rope;
+
+ addr_offset = elroy_hpa_offsets[i];
+ rope = elroy_rope_nr[i];
+
+ elroy = elroy_init(i);
+ s->elroy[i] = elroy;
+ elroy->hpa = ASTRO_HPA + addr_offset;
+ elroy->pci_bus_num = i;
+ elroy->astro = s;
+
+ /*
+ * NOTE: we only allow PCI devices on first Elroy for now.
+ * SeaBIOS will not find devices on the other busses.
+ */
+ if (i > 0) {
+ qbus_mark_full(&PCI_HOST_BRIDGE(elroy)->bus->qbus);
+ }
+
+ /* map elroy config addresses into Astro space */
+ memory_region_add_subregion(&s->this_mem, addr_offset,
+ &elroy->this_mem);
+
+ /* LMMIO */
+ elroy->mmio_base[(0x0200 - 0x200) / 8] = 0xf0000001;
+ elroy->mmio_base[(0x0208 - 0x200) / 8] = 0xf8000000;
+ /* GMMIO */
+ elroy->mmio_base[(0x0210 - 0x200) / 8] = 0x000000f800000001;
+ elroy->mmio_base[(0x0218 - 0x200) / 8] = 0x000000ff80000000;
+ /* WLMMIO */
+ elroy->mmio_base[(0x0220 - 0x200) / 8] = 0xf0000001;
+ elroy->mmio_base[(0x0228 - 0x200) / 8] = 0xf0000000;
+ /* WGMMIO */
+ elroy->mmio_base[(0x0230 - 0x200) / 8] = 0x000000f800000001;
+ elroy->mmio_base[(0x0238 - 0x200) / 8] = 0x000000fc00000000;
+ /* IOS_BASE */
+ map_size = IOS_DIST_BASE_SIZE / ROPES_PER_IOC;
+ elroy->mmio_base[(0x0240 - 0x200) / 8] = rope * map_size | 0x01;
+ elroy->mmio_base[(0x0248 - 0x200) / 8] = 0x0000e000;
+
+ /* map elroys mmio */
+ map_size = LMMIO_DIST_BASE_SIZE / ROPES_PER_IOC;
+ map_addr = (uint32_t) (LMMIO_DIST_BASE_ADDR + rope * map_size);
+ memory_region_init_alias(&elroy->pci_mmio_alias, OBJECT(elroy),
+ "pci-mmio-alias",
+ &elroy->pci_mmio, map_addr, map_size);
+ memory_region_add_subregion(get_system_memory(), map_addr,
+ &elroy->pci_mmio_alias);
+
+ map_size = IOS_DIST_BASE_SIZE / ROPES_PER_IOC;
+ map_addr = (uint32_t) (IOS_DIST_BASE_ADDR + rope * map_size);
+ memory_region_add_subregion(get_system_memory(), map_addr,
+ &elroy->pci_io);
+
+ /* Host memory as seen from the PCI side, via the IOMMU. */
+ pci_setup_iommu(PCI_HOST_BRIDGE(elroy)->bus, elroy_pcihost_set_iommu,
+ elroy);
+ }
+}
+
+static void astro_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = astro_reset;
+ dc->vmsd = &vmstate_astro;
+ dc->user_creatable = false;
+}
+
+static const TypeInfo astro_chip_info = {
+ .name = TYPE_ASTRO_CHIP,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_init = astro_init,
+ .instance_size = sizeof(AstroState),
+ .class_init = astro_class_init,
+};
+
+static void astro_iommu_memory_region_class_init(ObjectClass *klass,
+ void *data)
+{
+ IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
+
+ imrc->translate = astro_translate_iommu;
+}
+
+static const TypeInfo astro_iommu_memory_region_info = {
+ .parent = TYPE_IOMMU_MEMORY_REGION,
+ .name = TYPE_ASTRO_IOMMU_MEMORY_REGION,
+ .class_init = astro_iommu_memory_region_class_init,
+};
+
+
+static void astro_register_types(void)
+{
+ type_register_static(&astro_chip_info);
+ type_register_static(&astro_iommu_memory_region_info);
+}
+
+type_init(astro_register_types)
@@ -46,3 +46,14 @@ pnv_phb4_xive_notify_abt(uint64_t notif_port, uint64_t data) "notif=@0x%"PRIx64"
dino_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
dino_chip_read(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
dino_chip_write(uint64_t addr, uint32_t val) "addr 0x%"PRIx64" val 0x%08x"
+
+# astro.c
+astro_chip_mem_valid(uint64_t addr, uint32_t val) "access to addr 0x%"PRIx64" is %d"
+astro_chip_read(uint64_t addr, int size, uint64_t val) "addr 0x%"PRIx64" size %d val 0x%"PRIx64
+astro_chip_write(uint64_t addr, int size, uint64_t val) "addr 0x%"PRIx64" size %d val 0x%"PRIx64
+elroy_read(uint64_t addr, int size, uint64_t val) "addr 0x%"PRIx64" size %d val 0x%"PRIx64
+elroy_write(uint64_t addr, int size, uint64_t val) "addr 0x%"PRIx64" size %d val 0x%"PRIx64
+elroy_pci_config_data_read(uint64_t addr, int size, uint64_t val) "addr 0x%"PRIx64" size %d val 0x%"PRIx64
+elroy_pci_config_data_write(uint64_t addr, int size, uint64_t val) "addr 0x%"PRIx64" size %d val 0x%"PRIx64
+iosapic_reg_write(uint64_t reg_select, int size, uint64_t val) "reg_select 0x%"PRIx64" size %d val 0x%"PRIx64
+iosapic_reg_read(uint64_t reg_select, int size, uint64_t val) "reg_select 0x%"PRIx64" size %d val 0x%"PRIx64
new file mode 100644
@@ -0,0 +1,92 @@
+/*
+ * HP-PARISC Astro Bus connector with Elroy PCI host bridges
+ */
+
+#ifndef ASTRO_H
+#define ASTRO_H
+
+#include "hw/pci/pci_host.h"
+
+#define ASTRO_HPA 0xfed00000
+
+#define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */
+
+#define TYPE_ASTRO_CHIP "astro-chip"
+OBJECT_DECLARE_SIMPLE_TYPE(AstroState, ASTRO_CHIP)
+
+#define TYPE_ELROY_PCI_HOST_BRIDGE "elroy-pcihost"
+OBJECT_DECLARE_SIMPLE_TYPE(ElroyState, ELROY_PCI_HOST_BRIDGE)
+
+#define ELROY_NUM 4 /* # of Elroys */
+#define ELROY_IRQS 8 /* IOSAPIC IRQs */
+
+/* ASTRO Memory and I/O regions */
+#define LMMIO_DIST_BASE_ADDR 0xf4000000ULL
+#define LMMIO_DIST_BASE_SIZE 0x4000000ULL
+
+#define IOS_DIST_BASE_ADDR 0xfffee00000ULL
+#define IOS_DIST_BASE_SIZE 0x10000ULL
+
+struct AstroState;
+
+struct ElroyState {
+ PCIHostState parent_obj;
+
+ /* parent Astro device */
+ struct AstroState *astro;
+
+ /* HPA of this Elroy */
+ hwaddr hpa;
+
+ /* PCI bus number (Elroy number) */
+ unsigned int pci_bus_num;
+
+ uint64_t config_address;
+ uint64_t config_reg_elroy;
+
+ uint64_t status_control;
+ uint64_t arb_mask;
+ uint64_t mmio_base[(0x0250 - 0x200) / 8];
+ uint64_t error_config;
+
+ uint32_t iosapic_reg_select;
+ uint64_t iosapic_reg[0x20];
+
+ uint32_t ilr;
+
+ MemoryRegion this_mem;
+
+ MemoryRegion pci_mmio;
+ MemoryRegion pci_mmio_alias;
+ MemoryRegion pci_hole;
+ MemoryRegion pci_io;
+};
+
+struct AstroState {
+ PCIHostState parent_obj;
+
+ uint64_t ioc_ctrl;
+ uint64_t ioc_status_ctrl;
+ uint64_t ioc_ranges[(0x03d8 - 0x300) / 8];
+ uint64_t ioc_rope_config;
+ uint64_t ioc_status_control;
+ uint64_t ioc_flush_control;
+ uint64_t ioc_rope_control[8];
+ uint64_t tlb_ibase;
+ uint64_t tlb_imask;
+ uint64_t tlb_pcom;
+ uint64_t tlb_tcnfg;
+ uint64_t tlb_pdir_base;
+
+ struct ElroyState *elroy[ELROY_NUM];
+
+ MemoryRegion this_mem;
+
+ MemoryRegion pci_mmio;
+ MemoryRegion pci_io;
+
+ IOMMUMemoryRegion iommu;
+ AddressSpace iommu_as;
+};
+
+#endif