From patchwork Mon Mar 20 09:38:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gerd Hoffmann X-Patchwork-Id: 1758897 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=nongnu.org (client-ip=209.51.188.17; helo=lists.gnu.org; envelope-from=qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=redhat.com header.i=@redhat.com header.a=rsa-sha256 header.s=mimecast20190719 header.b=HPXuGhen; dkim-atps=neutral Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-ECDSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4Pg8pR0zYYz247d for ; Mon, 20 Mar 2023 20:39:43 +1100 (AEDT) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1peByr-0001XE-3D; Mon, 20 Mar 2023 05:39:05 -0400 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1peBym-0001Tp-VH for qemu-devel@nongnu.org; Mon, 20 Mar 2023 05:39:01 -0400 Received: from us-smtp-delivery-124.mimecast.com ([170.10.133.124]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1peByh-0003SW-OE for qemu-devel@nongnu.org; Mon, 20 Mar 2023 05:39:00 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=redhat.com; s=mimecast20190719; t=1679305135; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=LJrCjkjUlBik/3dh3MElKLP0EIatgPyPNbV2DBetjSQ=; b=HPXuGhen3+gLewFPjVEdXslM5IcJqNf/K0oJfdDTwSBh7T0bYN/WFYOMzQJpEFmfnYRDOe bbB+2SSjTsKkRy2fHei0i3wzquRLWRSf9u7znFM+oGEz0jh87OsSVShLW4I8A3p7etVDYt RPEIjyAz0oqNV5wnNd/ktfDB1w8CJKI= Received: from mimecast-mx02.redhat.com (mx3-rdu2.redhat.com [66.187.233.73]) by relay.mimecast.com with ESMTP with STARTTLS (version=TLSv1.2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id us-mta-610-Lqme1ne-Olmh4mVU8OtMhg-1; Mon, 20 Mar 2023 05:38:53 -0400 X-MC-Unique: Lqme1ne-Olmh4mVU8OtMhg-1 Received: from smtp.corp.redhat.com (int-mx07.intmail.prod.int.rdu2.redhat.com [10.11.54.7]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by mimecast-mx02.redhat.com (Postfix) with ESMTPS id 244233C218A1; Mon, 20 Mar 2023 09:38:53 +0000 (UTC) Received: from sirius.home.kraxel.org (unknown [10.39.192.144]) by smtp.corp.redhat.com (Postfix) with ESMTPS id 633841410F1C; Mon, 20 Mar 2023 09:38:52 +0000 (UTC) Received: by sirius.home.kraxel.org (Postfix, from userid 1000) id 0715E1800383; Mon, 20 Mar 2023 10:38:48 +0100 (CET) From: Gerd Hoffmann To: qemu-devel@nongnu.org Cc: Gerd Hoffmann , "Michael S. Tsirkin" , =?utf-8?q?Philippe_Mathieu-Daud=C3=A9?= , Ani Sinha , Igor Mammedov Subject: [PULL 5/6] edk2: replace build scripts Date: Mon, 20 Mar 2023 10:38:46 +0100 Message-Id: <20230320093847.539751-6-kraxel@redhat.com> In-Reply-To: <20230320093847.539751-1-kraxel@redhat.com> References: <20230320093847.539751-1-kraxel@redhat.com> MIME-Version: 1.0 X-Scanned-By: MIMEDefang 3.1 on 10.11.54.7 Received-SPF: pass client-ip=170.10.133.124; envelope-from=kraxel@redhat.com; helo=us-smtp-delivery-124.mimecast.com X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIMWL_WL_HIGH=-0.001, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, RCVD_IN_DNSWL_NONE=-0.0001, RCVD_IN_MSPIKE_H2=-0.001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org Sender: qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org Remove Makefile.edk2 and the edk2*.sh scripts and replace them with a python script (which already handles fedora rpm builds) and a config file for it. Signed-off-by: Gerd Hoffmann --- roms/edk2-build.py | 380 +++++++++++++++++++++++++++++++++++++++++ roms/Makefile | 29 +--- roms/Makefile.edk2 | 178 ------------------- roms/edk2-build.config | 124 ++++++++++++++ roms/edk2-build.sh | 55 ------ roms/edk2-funcs.sh | 273 ----------------------------- 6 files changed, 511 insertions(+), 528 deletions(-) create mode 100755 roms/edk2-build.py delete mode 100644 roms/Makefile.edk2 create mode 100644 roms/edk2-build.config delete mode 100755 roms/edk2-build.sh delete mode 100644 roms/edk2-funcs.sh diff --git a/roms/edk2-build.py b/roms/edk2-build.py new file mode 100755 index 000000000000..870893f7c8e3 --- /dev/null +++ b/roms/edk2-build.py @@ -0,0 +1,380 @@ +#!/usr/bin/python3 +""" +build helper script for edk2, see +https://gitlab.com/kraxel/edk2-build-config + +""" +import os +import sys +import shutil +import argparse +import subprocess +import configparser + +rebase_prefix = "" +version_override = None +release_date = None + +# pylint: disable=unused-variable +def check_rebase(): + """ detect 'git rebase -x edk2-build.py master' testbuilds """ + global rebase_prefix + global version_override + gitdir = '.git' + + if os.path.isfile(gitdir): + with open(gitdir, 'r', encoding = 'utf-8') as f: + (unused, gitdir) = f.read().split() + + if not os.path.exists(f'{gitdir}/rebase-merge/msgnum'): + return + with open(f'{gitdir}/rebase-merge/msgnum', 'r', encoding = 'utf-8') as f: + msgnum = int(f.read()) + with open(f'{gitdir}/rebase-merge/end', 'r', encoding = 'utf-8') as f: + end = int(f.read()) + with open(f'{gitdir}/rebase-merge/head-name', 'r', encoding = 'utf-8') as f: + head = f.read().strip().split('/') + + rebase_prefix = f'[ {int(msgnum/2)} / {int(end/2)} - {head[-1]} ] ' + if msgnum != end and not version_override: + # fixed version speeds up builds + version_override = "test-build-patch-series" + +def get_coredir(cfg): + if cfg.has_option('global', 'core'): + return os.path.abspath(cfg['global']['core']) + return os.getcwd() + +def get_version(cfg): + coredir = get_coredir(cfg) + if version_override: + version = version_override + print('') + print(f'### version [override]: {version}') + return version + if os.environ.get('RPM_PACKAGE_NAME'): + version = os.environ.get('RPM_PACKAGE_NAME') + version += '-' + os.environ.get('RPM_PACKAGE_VERSION') + version += '-' + os.environ.get('RPM_PACKAGE_RELEASE') + print('') + print(f'### version [rpmbuild]: {version}') + return version + if os.path.exists(coredir + '/.git'): + cmdline = [ 'git', 'describe', '--tags', '--abbrev=8', + '--match=edk2-stable*' ] + result = subprocess.run(cmdline, cwd = coredir, + stdout = subprocess.PIPE, + check = True) + version = result.stdout.decode().strip() + print('') + print(f'### version [git]: {version}') + return version + return None + +def pcd_string(name, value): + return f'{name}=L{value}\\0' + +def pcd_version(cfg): + version = get_version(cfg) + if version is None: + return [] + return [ '--pcd', pcd_string('PcdFirmwareVersionString', version) ] + +def pcd_release_date(): + if release_date is None: + return [] + return [ '--pcd', pcd_string('PcdFirmwareReleaseDateString', release_date) ] + +def build_message(line, line2 = None): + if os.environ.get('TERM') in [ 'xterm', 'xterm-256color' ]: + # setxterm title + start = '\x1b]2;' + end = '\x07' + print(f'{start}{rebase_prefix}{line}{end}', end = '') + + print('') + print('###') + print(f'### {rebase_prefix}{line}') + if line2: + print(f'### {line2}') + print('###', flush = True) + +def build_run(cmdline, name, section, silent = False): + print(cmdline, flush = True) + if silent: + print('### building in silent mode ...', flush = True) + result = subprocess.run(cmdline, check = False, + stdout = subprocess.PIPE, + stderr = subprocess.STDOUT) + + logfile = f'{section}.log' + print(f'### writing log to {logfile} ...') + with open(logfile, 'wb') as f: + f.write(result.stdout) + + if result.returncode: + print('### BUILD FAILURE') + print('### output') + print(result.stdout.decode()) + print(f'### exit code: {result.returncode}') + else: + print('### OK') + else: + result = subprocess.run(cmdline, check = False) + if result.returncode: + print(f'ERROR: {cmdline[0]} exited with {result.returncode}' + f' while building {name}') + sys.exit(result.returncode) + +def build_copy(plat, tgt, dstdir, copy): + srcdir = f'Build/{plat}/{tgt}_GCC5' + names = copy.split() + srcfile = names[0] + if len(names) > 1: + dstfile = names[1] + else: + dstfile = os.path.basename(srcfile) + print(f'# copy: {srcdir} / {srcfile} => {dstdir} / {dstfile}') + + src = srcdir + '/' + srcfile + dst = dstdir + '/' + dstfile + os.makedirs(os.path.dirname(dst), exist_ok = True) + shutil.copy(src, dst) + +def pad_file(dstdir, pad): + args = pad.split() + if len(args) < 2: + raise RuntimeError(f'missing arg for pad ({args})') + name = args[0] + size = args[1] + cmdline = [ + 'truncate', + '--size', size, + dstdir + '/' + name, + ] + print(f'# padding: {dstdir} / {name} => {size}') + subprocess.run(cmdline, check = True) + +# pylint: disable=too-many-branches +def build_one(cfg, build, jobs = None, silent = False): + cmdline = [ 'build' ] + cmdline += [ '-t', 'GCC5' ] + cmdline += [ '-p', cfg[build]['conf'] ] + + if (cfg[build]['conf'].startswith('OvmfPkg/') or + cfg[build]['conf'].startswith('ArmVirtPkg/')): + cmdline += pcd_version(cfg) + cmdline += pcd_release_date() + + if jobs: + cmdline += [ '-n', jobs ] + for arch in cfg[build]['arch'].split(): + cmdline += [ '-a', arch ] + if 'opts' in cfg[build]: + for name in cfg[build]['opts'].split(): + section = 'opts.' + name + for opt in cfg[section]: + cmdline += [ '-D', opt + '=' + cfg[section][opt] ] + if 'pcds' in cfg[build]: + for name in cfg[build]['pcds'].split(): + section = 'pcds.' + name + for pcd in cfg[section]: + cmdline += [ '--pcd', pcd + '=' + cfg[section][pcd] ] + if 'tgts' in cfg[build]: + tgts = cfg[build]['tgts'].split() + else: + tgts = [ 'DEBUG' ] + for tgt in tgts: + desc = None + if 'desc' in cfg[build]: + desc = cfg[build]['desc'] + build_message(f'building: {cfg[build]["conf"]} ({cfg[build]["arch"]}, {tgt})', + f'description: {desc}') + build_run(cmdline + [ '-b', tgt ], + cfg[build]['conf'], + build + '.' + tgt, + silent) + + if 'plat' in cfg[build]: + # copy files + for cpy in cfg[build]: + if not cpy.startswith('cpy'): + continue + build_copy(cfg[build]['plat'], + tgt, + cfg[build]['dest'], + cfg[build][cpy]) + # pad builds + for pad in cfg[build]: + if not pad.startswith('pad'): + continue + pad_file(cfg[build]['dest'], + cfg[build][pad]) + +def build_basetools(silent = False): + build_message('building: BaseTools') + basedir = os.environ['EDK_TOOLS_PATH'] + cmdline = [ 'make', '-C', basedir ] + build_run(cmdline, 'BaseTools', 'build.basetools', silent) + +def binary_exists(name): + for pdir in os.environ['PATH'].split(':'): + if os.path.exists(pdir + '/' + name): + return True + return False + +def prepare_env(cfg): + """ mimic Conf/BuildEnv.sh """ + workspace = os.getcwd() + packages = [ workspace, ] + path = os.environ['PATH'].split(':') + dirs = [ + 'BaseTools/Bin/Linux-x86_64', + 'BaseTools/BinWrappers/PosixLike' + ] + + if cfg.has_option('global', 'pkgs'): + for pkgdir in cfg['global']['pkgs'].split(): + packages.append(os.path.abspath(pkgdir)) + coredir = get_coredir(cfg) + if coredir != workspace: + packages.append(coredir) + + # add basetools to path + for pdir in dirs: + p = coredir + '/' + pdir + if not os.path.exists(p): + continue + if p in path: + continue + path.insert(0, p) + + # run edksetup if needed + toolsdef = coredir + '/Conf/tools_def.txt' + if not os.path.exists(toolsdef): + os.makedirs(os.path.dirname(toolsdef), exist_ok = True) + build_message('running BaseTools/BuildEnv') + cmdline = [ 'bash', 'BaseTools/BuildEnv' ] + subprocess.run(cmdline, cwd = coredir, check = True) + + # set variables + os.environ['PATH'] = ':'.join(path) + os.environ['PACKAGES_PATH'] = ':'.join(packages) + os.environ['WORKSPACE'] = workspace + os.environ['EDK_TOOLS_PATH'] = coredir + '/BaseTools' + os.environ['CONF_PATH'] = coredir + '/Conf' + os.environ['PYTHON_COMMAND'] = '/usr/bin/python3' + os.environ['PYTHONHASHSEED'] = '1' + + # for cross builds + if binary_exists('arm-linux-gnu-gcc'): + os.environ['GCC5_ARM_PREFIX'] = 'arm-linux-gnu-' + if binary_exists('loongarch64-linux-gnu-gcc'): + os.environ['GCC5_LOONGARCH64_PREFIX'] = 'loongarch64-linux-gnu-' + + hostarch = os.uname().machine + if binary_exists('aarch64-linux-gnu-gcc') and hostarch != 'aarch64': + os.environ['GCC5_AARCH64_PREFIX'] = 'aarch64-linux-gnu-' + if binary_exists('riscv64-linux-gnu-gcc') and hostarch != 'riscv64': + os.environ['GCC5_RISCV64_PREFIX'] = 'riscv64-linux-gnu-' + if binary_exists('x86_64-linux-gnu-gcc') and hostarch != 'x86_64': + os.environ['GCC5_IA32_PREFIX'] = 'x86_64-linux-gnu-' + os.environ['GCC5_X64_PREFIX'] = 'x86_64-linux-gnu-' + os.environ['GCC5_BIN'] = 'x86_64-linux-gnu-' + +def build_list(cfg): + for build in cfg.sections(): + if not build.startswith('build.'): + continue + name = build.lstrip('build.') + desc = 'no description' + if 'desc' in cfg[build]: + desc = cfg[build]['desc'] + print(f'# {name:20s} - {desc}') + +def main(): + parser = argparse.ArgumentParser(prog = 'edk2-build', + description = 'edk2 build helper script') + parser.add_argument('-c', '--config', dest = 'configfile', + type = str, default = '.edk2.builds', metavar = 'FILE', + help = 'read configuration from FILE (default: .edk2.builds)') + parser.add_argument('-C', '--directory', dest = 'directory', type = str, + help = 'change to DIR before building', metavar = 'DIR') + parser.add_argument('-j', '--jobs', dest = 'jobs', type = str, + help = 'allow up to JOBS parallel build jobs', + metavar = 'JOBS') + parser.add_argument('-m', '--match', dest = 'match', type = str, + help = 'only run builds matching INCLUDE (substring)', + metavar = 'INCLUDE') + parser.add_argument('-x', '--exclude', dest = 'exclude', type = str, + help = 'skip builds matching EXCLUDE (substring)', + metavar = 'EXCLUDE') + parser.add_argument('-l', '--list', dest = 'list', + action = 'store_true', default = False, + help = 'list build configs available') + parser.add_argument('--silent', dest = 'silent', + action = 'store_true', default = False, + help = 'write build output to logfiles, ' + 'write to console only on errors') + parser.add_argument('--core', dest = 'core', type = str, metavar = 'DIR', + help = 'location of the core edk2 repository ' + '(i.e. where BuildTools are located)') + parser.add_argument('--pkg', '--package', dest = 'pkgs', + type = str, action = 'append', metavar = 'DIR', + help = 'location(s) of additional packages ' + '(can be specified multiple times)') + parser.add_argument('--version-override', dest = 'version_override', + type = str, metavar = 'VERSION', + help = 'set firmware build version') + parser.add_argument('--release-date', dest = 'release_date', + type = str, metavar = 'DATE', + help = 'set firmware build release date (in MM/DD/YYYY format)') + options = parser.parse_args() + + if options.directory: + os.chdir(options.directory) + + if not os.path.exists(options.configfile): + print('config file "{options.configfile}" not found') + return 1 + + cfg = configparser.ConfigParser() + cfg.optionxform = str + cfg.read(options.configfile) + + if options.list: + build_list(cfg) + return + + if not cfg.has_section('global'): + cfg.add_section('global') + if options.core: + cfg.set('global', 'core', options.core) + if options.pkgs: + cfg.set('global', 'pkgs', ' '.join(options.pkgs)) + + global version_override + global release_date + check_rebase() + if options.version_override: + version_override = options.version_override + if options.release_date: + release_date = options.release_date + + prepare_env(cfg) + build_basetools(options.silent) + for build in cfg.sections(): + if not build.startswith('build.'): + continue + if options.match and options.match not in build: + print(f'# skipping "{build}" (not matching "{options.match}")') + continue + if options.exclude and options.exclude in build: + print(f'# skipping "{build}" (matching "{options.exclude}")') + continue + build_one(cfg, build, options.jobs, options.silent) + + return 0 + +if __name__ == '__main__': + sys.exit(main()) diff --git a/roms/Makefile b/roms/Makefile index 955f92286de0..6859685290bf 100644 --- a/roms/Makefile +++ b/roms/Makefile @@ -126,25 +126,6 @@ build-efi-roms: build-pxe-roms CROSS_COMPILE=$(x86_64_cross_prefix) \ $(patsubst %,bin-x86_64-efi/%.efidrv,$(pxerom_targets)) -# Build scripts can pass compiler/linker flags to the EDK2 -# build tools via the EDK2_BASETOOLS_OPTFLAGS (CFLAGS) and -# EDK2_BASETOOLS_LDFLAGS (LDFLAGS) environment variables. -# -# Example: -# -# make -C roms \ -# EDK2_BASETOOLS_OPTFLAGS='...' \ -# EDK2_BASETOOLS_LDFLAGS='...' \ -# efirom -# -edk2-basetools: - cd edk2/BaseTools && git submodule update --init --force \ - Source/C/BrotliCompress/brotli - $(MAKE) -C edk2/BaseTools \ - PYTHON_COMMAND=$${EDK2_PYTHON_COMMAND:-python3} \ - EXTRA_OPTFLAGS='$(EDK2_BASETOOLS_OPTFLAGS)' \ - EXTRA_LDFLAGS='$(EDK2_BASETOOLS_LDFLAGS)' - slof: $(MAKE) -C SLOF CROSS=$(powerpc64_cross_prefix) qemu cp SLOF/boot_rom.bin ../pc-bios/slof.bin @@ -165,8 +146,12 @@ skiboot: $(MAKE) -C skiboot CROSS=$(powerpc64_cross_prefix) cp skiboot/skiboot.lid ../pc-bios/skiboot.lid -efi: edk2-basetools - $(MAKE) -f Makefile.edk2 +efi: + python3 edk2-build.py --config edk2-build.config \ + --version-override "edk2-stable202302-for-qemu" \ + --release-date "03/01/2023" + rm -f ../pc-bios/edk2-*.fd.bz2 + bzip2 --verbose ../pc-bios/edk2-*.fd opensbi32-generic: $(MAKE) -C opensbi \ @@ -200,7 +185,7 @@ clean: rm -rf u-boot/build-e500 $(MAKE) -C u-boot-sam460ex distclean $(MAKE) -C skiboot clean - $(MAKE) -f Makefile.edk2 clean + rm -rf Build $(MAKE) -C opensbi clean $(MAKE) -C qboot clean $(MAKE) -C vbootrom clean diff --git a/roms/Makefile.edk2 b/roms/Makefile.edk2 deleted file mode 100644 index 485f2244b159..000000000000 --- a/roms/Makefile.edk2 +++ /dev/null @@ -1,178 +0,0 @@ -# Makefile for building firmware binaries and variable store templates for a -# number of virtual platforms in edk2. -# -# Copyright (C) 2019 Red Hat, Inc. -# -# This program and the accompanying materials are licensed and made available -# under the terms and conditions of the BSD License that accompanies this -# distribution. The full text of the license may be found at -# . -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT -# WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -SHELL = /bin/bash - -target = RELEASE -toolchain = $(shell source ./edk2-funcs.sh && qemu_edk2_get_toolchain $(1)) - -licenses := \ - edk2/License.txt \ - edk2/License-History.txt \ - edk2/OvmfPkg/License.txt \ - edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3/COPYING.txt \ - edk2/CryptoPkg/Library/OpensslLib/openssl/LICENSE - -# The "edk2-arm-vars.fd" varstore template is suitable for aarch64 as well. -# Similarly, the "edk2-i386-vars.fd" varstore template is suitable for x86_64 -# as well, independently of "secure" too. -flashdevs := \ - aarch64-code \ - arm-code \ - i386-code \ - i386-secure-code \ - x86_64-code \ - x86_64-secure-code \ - x86_64-microvm \ - \ - arm-vars \ - i386-vars - -all: $(foreach flashdev,$(flashdevs),../pc-bios/edk2-$(flashdev).fd.bz2) \ - ../pc-bios/edk2-licenses.txt - -../pc-bios/edk2-%.fd.bz2: ../pc-bios/edk2-%.fd - bzip2 -9 -c $< > $@ - -# When the build completes, we need not keep the uncompressed flash device -# files. -.INTERMEDIATE: $(foreach flashdev,$(flashdevs),../pc-bios/edk2-$(flashdev).fd) - -# Fetch edk2 submodule's submodules. If it is not in a git tree, assume -# we're building from a tarball and that they've already been fetched by -# make-release/tarball scripts. -submodules: - if test -e edk2/.git; then \ - cd edk2 && git submodule update --init --force -- \ - ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3 \ - BaseTools/Source/C/BrotliCompress/brotli \ - CryptoPkg/Library/OpensslLib/openssl \ - MdeModulePkg/Library/BrotliCustomDecompressLib/brotli \ - ; \ - fi - -# See notes on the ".NOTPARALLEL" target and the "+" indicator in -# "tests/uefi-test-tools/Makefile". -.NOTPARALLEL: - -../pc-bios/edk2-aarch64-code.fd: submodules - +./edk2-build.sh \ - aarch64 \ - --arch=AARCH64 \ - --platform=ArmVirtPkg/ArmVirtQemu.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE \ - -D TPM2_ENABLE \ - -D TPM2_CONFIG_ENABLE - cp edk2/Build/ArmVirtQemu-AARCH64/$(target)_$(call toolchain,aarch64)/FV/QEMU_EFI.fd \ - $@ - truncate --size=64M $@ - -../pc-bios/edk2-arm-code.fd: submodules - +./edk2-build.sh \ - arm \ - --arch=ARM \ - --platform=ArmVirtPkg/ArmVirtQemu.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE \ - -D TPM2_ENABLE \ - -D TPM2_CONFIG_ENABLE - cp edk2/Build/ArmVirtQemu-ARM/$(target)_$(call toolchain,arm)/FV/QEMU_EFI.fd \ - $@ - truncate --size=64M $@ - -../pc-bios/edk2-i386-code.fd: submodules - +./edk2-build.sh \ - i386 \ - --arch=IA32 \ - --platform=OvmfPkg/OvmfPkgIa32.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE \ - -D TPM_ENABLE \ - -D TPM_CONFIG_ENABLE - cp edk2/Build/OvmfIa32/$(target)_$(call toolchain,i386)/FV/OVMF_CODE.fd $@ - -../pc-bios/edk2-i386-secure-code.fd: submodules - +./edk2-build.sh \ - i386 \ - --arch=IA32 \ - --platform=OvmfPkg/OvmfPkgIa32.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE \ - -D TPM_ENABLE \ - -D TPM_CONFIG_ENABLE \ - -D SECURE_BOOT_ENABLE \ - -D SMM_REQUIRE - cp edk2/Build/OvmfIa32/$(target)_$(call toolchain,i386)/FV/OVMF_CODE.fd $@ - -../pc-bios/edk2-x86_64-code.fd: submodules - +./edk2-build.sh \ - x86_64 \ - --arch=X64 \ - --platform=OvmfPkg/OvmfPkgX64.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE \ - -D TPM_ENABLE \ - -D TPM_CONFIG_ENABLE - cp edk2/Build/OvmfX64/$(target)_$(call toolchain,x86_64)/FV/OVMF_CODE.fd $@ - -../pc-bios/edk2-x86_64-secure-code.fd: submodules - +./edk2-build.sh \ - x86_64 \ - --arch=IA32 \ - --arch=X64 \ - --platform=OvmfPkg/OvmfPkgIa32X64.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE \ - -D TPM_ENABLE \ - -D TPM_CONFIG_ENABLE \ - -D SECURE_BOOT_ENABLE \ - -D SMM_REQUIRE - cp edk2/Build/Ovmf3264/$(target)_$(call toolchain,x86_64)/FV/OVMF_CODE.fd $@ - -../pc-bios/edk2-x86_64-microvm.fd: submodules - +./edk2-build.sh \ - x86_64 \ - --arch=X64 \ - --platform=OvmfPkg/Microvm/MicrovmX64.dsc \ - -D NETWORK_IP6_ENABLE \ - -D NETWORK_HTTP_BOOT_ENABLE \ - -D NETWORK_TLS_ENABLE - cp edk2/Build/MicrovmX64/$(target)_$(call toolchain,x86_64)/FV/MICROVM.fd $@ - -../pc-bios/edk2-arm-vars.fd: ../pc-bios/edk2-arm-code.fd - cp edk2/Build/ArmVirtQemu-ARM/$(target)_$(call toolchain,arm)/FV/QEMU_VARS.fd \ - $@ - truncate --size=64M $@ - -../pc-bios/edk2-i386-vars.fd: ../pc-bios/edk2-i386-code.fd - cp edk2/Build/OvmfIa32/$(target)_$(call toolchain,i386)/FV/OVMF_VARS.fd $@ - -# The license file accumulates several individual licenses from under edk2, -# prefixing each individual license with a header (generated by "tail") that -# states its pathname. -../pc-bios/edk2-licenses.txt: submodules - tail -n $(shell cat $(licenses) | wc -l) $(licenses) > $@ - dos2unix $@ - -clean: - rm -rf edk2/Build - cd edk2/Conf && \ - rm -rf .cache BuildEnv.sh build_rule.txt target.txt \ - tools_def.txt diff --git a/roms/edk2-build.config b/roms/edk2-build.config new file mode 100644 index 000000000000..66ef9ffcb91f --- /dev/null +++ b/roms/edk2-build.config @@ -0,0 +1,124 @@ +[global] +core = edk2 + +#################################################################################### +# options + +[opts.common] +NETWORK_HTTP_BOOT_ENABLE = TRUE +NETWORK_IP6_ENABLE = TRUE +NETWORK_TLS_ENABLE = TRUE +NETWORK_ISCSI_ENABLE = TRUE +NETWORK_ALLOW_HTTP_CONNECTIONS = TRUE +TPM2_ENABLE = TRUE +TPM2_CONFIG_ENABLE = TRUE +TPM1_ENABLE = TRUE +CAVIUM_ERRATUM_27456 = TRUE + +[opts.ovmf.sb.smm] +SECURE_BOOT_ENABLE = TRUE +SMM_REQUIRE = TRUE + +[opts.armvirt.silent] +DEBUG_PRINT_ERROR_LEVEL = 0x80000000 + +[pcds.nx.broken.grub] +# grub.efi uses EfiLoaderData for code +PcdDxeNxMemoryProtectionPolicy = 0xC000000000007FD1 + +#################################################################################### +# i386 + +[build.ovmf.i386] +desc = ovmf build (32-bit) +conf = OvmfPkg/OvmfPkgIa32.dsc +arch = IA32 +opts = common +plat = OvmfIa32 +dest = ../pc-bios +cpy1 = FV/OVMF_CODE.fd edk2-i386-code.fd +cpy2 = FV/OVMF_VARS.fd edk2-i386-vars.fd + +[build.ovmf.i386.secure] +desc = ovmf build (32-bit, secure boot) +conf = OvmfPkg/OvmfPkgIa32.dsc +arch = IA32 +opts = common + ovmf.sb.smm +plat = OvmfIa32 +dest = ../pc-bios +cpy1 = FV/OVMF_CODE.fd edk2-i386-secure-code.fd + +#################################################################################### +# x86_64 + +[build.ovmf.x86_64] +desc = ovmf build (64-bit) +conf = OvmfPkg/OvmfPkgX64.dsc +arch = X64 +opts = common +plat = OvmfX64 +dest = ../pc-bios +cpy1 = FV/OVMF_CODE.fd edk2-x86_64-code.fd + +[build.ovmf.x86_64.secure] +desc = ovmf build (64-bit, secure boot) +conf = OvmfPkg/OvmfPkgIa32X64.dsc +arch = IA32 X64 +opts = common + ovmf.sb.smm +plat = Ovmf3264 +dest = ../pc-bios +cpy1 = FV/OVMF_CODE.fd edk2-x86_64-secure-code.fd + +[build.ovmf.microvm] +desc = ovmf build for microvm +conf = OvmfPkg/Microvm/MicrovmX64.dsc +arch = X64 +opts = common +plat = MicrovmX64 +dest = ../pc-bios +cpy1 = FV/MICROVM.fd edk2-x86_64-microvm.fd + +#################################################################################### +# arm + +[build.armvirt.arm] +desc = ArmVirt build, 32-bit (arm v7) +conf = ArmVirtPkg/ArmVirtQemu.dsc +arch = ARM +opts = common + armvirt.silent +pcds = nx.broken.grub +plat = ArmVirtQemu-ARM +dest = ../pc-bios +cpy1 = FV/QEMU_EFI.fd edk2-arm-code.fd +cpy2 = FV/QEMU_VARS.fd edk2-arm-vars.fd +pad1 = edk2-arm-code.fd 64m +pad2 = edk2-arm-vars.fd 64m + +#################################################################################### +# aarch64 + +[build.armvirt.aa64] +desc = ArmVirt build, 64-bit (arm v8) +conf = ArmVirtPkg/ArmVirtQemu.dsc +arch = AARCH64 +opts = common + armvirt.silent +pcds = nx.broken.grub +plat = ArmVirtQemu-AARCH64 +dest = ../pc-bios +cpy1 = FV/QEMU_EFI.fd edk2-aarch64-code.fd +pad1 = edk2-aarch64-code.fd 64m + +#################################################################################### +# riscv64 + +[build.riscv.qemu] +conf = OvmfPkg/RiscVVirt/RiscVVirtQemu.dsc +arch = RISCV64 +plat = RiscVVirtQemu +dest = ../pc-bios +cpy1 = FV/RISCV_VIRT.fd edk2-riscv.fd +pad1 = edk2-riscv.fd 32m diff --git a/roms/edk2-build.sh b/roms/edk2-build.sh deleted file mode 100755 index ea79dc27a269..000000000000 --- a/roms/edk2-build.sh +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash - -# Wrapper shell script for building a virtual platform firmware in edk2. -# -# Copyright (C) 2019 Red Hat, Inc. -# -# This program and the accompanying materials are licensed and made available -# under the terms and conditions of the BSD License that accompanies this -# distribution. The full text of the license may be found at -# . -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT -# WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -set -e -u -C - -# Save the command line arguments. We need to reset $# to 0 before sourcing -# "edksetup.sh", as it will inherit $@. -emulation_target=$1 -shift -num_args=0 -args=() -for arg in "$@"; do - args[num_args++]="$arg" -done -shift $num_args - -cd edk2 - -export PYTHON_COMMAND=${EDK2_PYTHON_COMMAND:-python3} - -# Source "edksetup.sh" carefully. -set +e +u +C -source ./edksetup.sh -ret=$? -set -e -u -C -if [ $ret -ne 0 ]; then - exit $ret -fi - -# Fetch some option arguments, and set the cross-compilation environment (if -# any), for the edk2 "build" utility. -source ../edk2-funcs.sh -edk2_toolchain=$(qemu_edk2_get_toolchain "$emulation_target") -MAKEFLAGS=$(qemu_edk2_quirk_tianocore_1607 "$MAKEFLAGS") -edk2_thread_count=$(qemu_edk2_get_thread_count "$MAKEFLAGS") -qemu_edk2_set_cross_env "$emulation_target" - -# Build the platform firmware. -build \ - --cmd-len=65536 \ - -n "$edk2_thread_count" \ - --buildtarget=RELEASE \ - --tagname="$edk2_toolchain" \ - "${args[@]}" diff --git a/roms/edk2-funcs.sh b/roms/edk2-funcs.sh deleted file mode 100644 index cd6e4f2c82d2..000000000000 --- a/roms/edk2-funcs.sh +++ /dev/null @@ -1,273 +0,0 @@ -# Shell script that defines functions for determining some environmental -# characteristics for the edk2 "build" utility. -# -# This script is meant to be sourced, in a bash environment. -# -# Copyright (C) 2019 Red Hat, Inc. -# -# This program and the accompanying materials are licensed and made available -# under the terms and conditions of the BSD License that accompanies this -# distribution. The full text of the license may be found at -# . -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT -# WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - - -# Verify whether the QEMU system emulation target is supported by the UEFI spec -# and edk2. Print a message to the standard error, and return with nonzero -# status, if verification fails. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_verify_arch() -{ - local emulation_target="$1" - local program_name=$(basename -- "$0") - - case "$emulation_target" in - (arm|aarch64|i386|x86_64) - ;; - (*) - printf '%s: unknown/unsupported QEMU system emulation target "%s"\n' \ - "$program_name" "$emulation_target" >&2 - return 1 - ;; - esac -} - - -# Translate the QEMU system emulation target to the edk2 architecture -# identifier. Print the result to the standard output. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_get_arch() -{ - local emulation_target="$1" - - if ! qemu_edk2_verify_arch "$emulation_target"; then - return 1 - fi - - case "$emulation_target" in - (arm) - printf 'ARM\n' - ;; - (aarch64) - printf 'AARCH64\n' - ;; - (i386) - printf 'IA32\n' - ;; - (x86_64) - printf 'X64\n' - ;; - esac -} - - -# Translate the QEMU system emulation target to the gcc cross-compilation -# architecture identifier. Print the result to the standard output. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_get_gcc_arch() -{ - local emulation_target="$1" - - if ! qemu_edk2_verify_arch "$emulation_target"; then - return 1 - fi - - case "$emulation_target" in - (arm|aarch64|x86_64) - printf '%s\n' "$emulation_target" - ;; - (i386) - printf 'i686\n' - ;; - esac -} - - -# Determine the gcc cross-compiler prefix (if any) for use with the edk2 -# toolchain. Print the result to the standard output. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_get_cross_prefix() -{ - local emulation_target="$1" - local gcc_arch - local host_arch - - if ! gcc_arch=$(qemu_edk2_get_gcc_arch "$emulation_target"); then - return 1 - fi - - host_arch=$(uname -m) - - if [ "$gcc_arch" == "$host_arch" ] || - ( [ "$gcc_arch" == i686 ] && [ "$host_arch" == x86_64 ] ); then - # no cross-compiler needed - : - elif ( [ -e /etc/debian_version ] && [ "$gcc_arch" == arm ] ); then - # force soft-float cross-compiler on Debian - printf 'arm-linux-gnueabi-' - else - printf '%s-linux-gnu-\n' "$gcc_arch" - fi -} - - -# Determine the edk2 toolchain tag for the QEMU system emulation target. Print -# the result to the standard output. Print a message to the standard error, and -# return with nonzero status, if the (conditional) gcc version check fails. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_get_toolchain() -{ - local emulation_target="$1" - local program_name=$(basename -- "$0") - local cross_prefix - local gcc_version - - if ! qemu_edk2_verify_arch "$emulation_target"; then - return 1 - fi - - case "$emulation_target" in - (arm|aarch64) - printf 'GCC5\n' - ;; - - (i386|x86_64) - if ! cross_prefix=$(qemu_edk2_get_cross_prefix "$emulation_target"); then - return 1 - fi - - gcc_version=$("${cross_prefix}gcc" -v 2>&1 | tail -1 | awk '{print $3}') - # Run "git-blame" on "OvmfPkg/build.sh" in edk2 for more information on - # the mapping below. - case "$gcc_version" in - ([1-3].*|4.[0-7].*) - printf '%s: unsupported gcc version "%s"\n' \ - "$program_name" "$gcc_version" >&2 - return 1 - ;; - (4.8.*) - printf 'GCC48\n' - ;; - (4.9.*|6.[0-2].*) - printf 'GCC49\n' - ;; - (*) - printf 'GCC5\n' - ;; - esac - ;; - esac -} - - -# Determine the name of the environment variable that exposes the -# cross-compiler prefix to the edk2 "build" utility. Print the result to the -# standard output. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_get_cross_prefix_var() -{ - local emulation_target="$1" - local edk2_toolchain - local edk2_arch - - if ! edk2_toolchain=$(qemu_edk2_get_toolchain "$emulation_target"); then - return 1 - fi - - case "$emulation_target" in - (arm|aarch64) - if ! edk2_arch=$(qemu_edk2_get_arch "$emulation_target"); then - return 1 - fi - printf '%s_%s_PREFIX\n' "$edk2_toolchain" "$edk2_arch" - ;; - (i386|x86_64) - printf '%s_BIN\n' "$edk2_toolchain" - ;; - esac -} - - -# Set and export the environment variable(s) necessary for cross-compilation, -# whenever needed by the edk2 "build" utility. -# -# Parameters: -# $1: QEMU system emulation target -qemu_edk2_set_cross_env() -{ - local emulation_target="$1" - local cross_prefix - local cross_prefix_var - - if ! cross_prefix=$(qemu_edk2_get_cross_prefix "$emulation_target"); then - return 1 - fi - - if [ -z "$cross_prefix" ]; then - # Nothing to do. - return 0 - fi - - if ! cross_prefix_var=$(qemu_edk2_get_cross_prefix_var \ - "$emulation_target"); then - return 1 - fi - - eval "export $cross_prefix_var=\$cross_prefix" -} - - -# Determine the "-n" option argument (that is, the number of modules to build -# in parallel) for the edk2 "build" utility. Print the result to the standard -# output. -# -# Parameters: -# $1: the value of the MAKEFLAGS variable -qemu_edk2_get_thread_count() -{ - local makeflags="$1" - - if [[ "$makeflags" == *--jobserver-auth=* ]] || - [[ "$makeflags" == *--jobserver-fds=* ]]; then - # If there is a job server, allow the edk2 "build" utility to parallelize - # as many module builds as there are logical CPUs in the system. The "make" - # instances forked by "build" are supposed to limit themselves through the - # job server. The zero value below causes the edk2 "build" utility to fetch - # the logical CPU count with Python's multiprocessing.cpu_count() method. - printf '0\n' - else - # Build a single module at a time. - printf '1\n' - fi -} - - -# Work around by -# filtering jobserver-related flags out of MAKEFLAGS. Print the result to the -# standard output. -# -# Parameters: -# $1: the value of the MAKEFLAGS variable -qemu_edk2_quirk_tianocore_1607() -{ - local makeflags="$1" - - printf %s "$makeflags" \ - | LC_ALL=C sed --regexp-extended \ - --expression='s/--jobserver-(auth|fds)=[0-9]+,[0-9]+//' \ - --expression='s/-j([0-9]+)?//' -}