diff mbox series

[PULL,33/34] i.MX7D: Connect IRQs to GPIO devices.

Message ID 20230105164417.3994639-34-peter.maydell@linaro.org
State New
Headers show
Series [PULL,01/34] target/arm:Set lg_page_size to 0 if either S1 or S2 asks for it | expand

Commit Message

Peter Maydell Jan. 5, 2023, 4:44 p.m. UTC 
From: Jean-Christophe Dubois <jcd@tribudubois.net>

IRQs were not associated to the various GPIO devices inside i.MX7D.
This patch brings the i.MX7D on par with i.MX6.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20221226101418.415170-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx7.h | 15 +++++++++++++++
 hw/arm/fsl-imx7.c         | 31 ++++++++++++++++++++++++++++++-
 2 files changed, 45 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h
index 50f19d8db04..4e5e0718648 100644
--- a/include/hw/arm/fsl-imx7.h
+++ b/include/hw/arm/fsl-imx7.h
@@ -240,6 +240,21 @@  enum FslIMX7IRQs {
     FSL_IMX7_GPT3_IRQ     = 53,
     FSL_IMX7_GPT4_IRQ     = 52,
 
+    FSL_IMX7_GPIO1_LOW_IRQ  = 64,
+    FSL_IMX7_GPIO1_HIGH_IRQ = 65,
+    FSL_IMX7_GPIO2_LOW_IRQ  = 66,
+    FSL_IMX7_GPIO2_HIGH_IRQ = 67,
+    FSL_IMX7_GPIO3_LOW_IRQ  = 68,
+    FSL_IMX7_GPIO3_HIGH_IRQ = 69,
+    FSL_IMX7_GPIO4_LOW_IRQ  = 70,
+    FSL_IMX7_GPIO4_HIGH_IRQ = 71,
+    FSL_IMX7_GPIO5_LOW_IRQ  = 72,
+    FSL_IMX7_GPIO5_HIGH_IRQ = 73,
+    FSL_IMX7_GPIO6_LOW_IRQ  = 74,
+    FSL_IMX7_GPIO6_HIGH_IRQ = 75,
+    FSL_IMX7_GPIO7_LOW_IRQ  = 76,
+    FSL_IMX7_GPIO7_HIGH_IRQ = 77,
+
     FSL_IMX7_WDOG1_IRQ    = 78,
     FSL_IMX7_WDOG2_IRQ    = 79,
     FSL_IMX7_WDOG3_IRQ    = 10,
diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index 146bb559bbc..afc74807990 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -245,8 +245,37 @@  static void fsl_imx7_realize(DeviceState *dev, Error **errp)
             FSL_IMX7_GPIO7_ADDR,
         };
 
+        static const int FSL_IMX7_GPIOn_LOW_IRQ[FSL_IMX7_NUM_GPIOS] = {
+            FSL_IMX7_GPIO1_LOW_IRQ,
+            FSL_IMX7_GPIO2_LOW_IRQ,
+            FSL_IMX7_GPIO3_LOW_IRQ,
+            FSL_IMX7_GPIO4_LOW_IRQ,
+            FSL_IMX7_GPIO5_LOW_IRQ,
+            FSL_IMX7_GPIO6_LOW_IRQ,
+            FSL_IMX7_GPIO7_LOW_IRQ,
+        };
+
+        static const int FSL_IMX7_GPIOn_HIGH_IRQ[FSL_IMX7_NUM_GPIOS] = {
+            FSL_IMX7_GPIO1_HIGH_IRQ,
+            FSL_IMX7_GPIO2_HIGH_IRQ,
+            FSL_IMX7_GPIO3_HIGH_IRQ,
+            FSL_IMX7_GPIO4_HIGH_IRQ,
+            FSL_IMX7_GPIO5_HIGH_IRQ,
+            FSL_IMX7_GPIO6_HIGH_IRQ,
+            FSL_IMX7_GPIO7_HIGH_IRQ,
+        };
+
         sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort);
-        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]);
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                        FSL_IMX7_GPIOn_ADDR[i]);
+
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
+                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
+                                            FSL_IMX7_GPIOn_LOW_IRQ[i]));
+
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
+                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
+                                            FSL_IMX7_GPIOn_HIGH_IRQ[i]));
     }
 
     /*