@@ -338,8 +338,8 @@
# Cache mode information for a block device
#
# @writeback: true if writeback mode is enabled
-# @direct: true if the host page cache is bypassed (O_DIRECT)
-# @no-flush: true if flush requests are ignored for the device
+# @direct: true if the host page cache is bypassed (O_DIRECT)
+# @no-flush: true if flush requests are ignored for the device
#
# Since: 2.3
##
@@ -3333,12 +3333,11 @@
##
# @BlockdevOptionsSsh:
#
-# @server: host address
+# @server: host address
#
-# @path: path to the image on the host
+# @path: path to the image on the host
#
-# @user: user as which to connect, defaults to current
-# local user name
+# @user: user as which to connect, defaults to current local user name
#
# @host-key-check: Defines how and what to check the host key against
# (default: known_hosts)
@@ -4662,18 +4661,18 @@
#
# Subformat options for VMDK images
#
-# @monolithicSparse: Single file image with sparse cluster allocation
+# @monolithicSparse: Single file image with sparse cluster allocation
#
-# @monolithicFlat: Single flat data image and a descriptor file
+# @monolithicFlat: Single flat data image and a descriptor file
#
# @twoGbMaxExtentSparse: Data is split into 2GB (per virtual LBA) sparse extent
# files, in addition to a descriptor file
#
-# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat extent
-# files, in addition to a descriptor file
+# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat extent
+# files, in addition to a descriptor file
#
-# @streamOptimized: Single file image sparse cluster allocation, optimized
-# for streaming over network.
+# @streamOptimized: Single file image sparse cluster allocation, optimized
+# for streaming over network.
#
# Since: 4.0
##
@@ -4764,7 +4763,7 @@
# @BlockdevVhdxSubformat:
#
# @dynamic: Growing image file
-# @fixed: Preallocated fixed-size image file
+# @fixed: Preallocated fixed-size image file
#
# Since: 2.12
##
@@ -4802,7 +4801,7 @@
# @BlockdevVpcSubformat:
#
# @dynamic: Growing image file
-# @fixed: Preallocated fixed-size image file
+# @fixed: Preallocated fixed-size image file
#
# Since: 2.12
##
@@ -4865,7 +4864,7 @@
# Starts a job to create an image format on a given node. The job is
# automatically finalized, but a manual job-dismiss is required.
#
-# @job-id: Identifier for the newly created job.
+# @job-id: Identifier for the newly created job.
#
# @options: Options for the image creation.
#
@@ -4923,17 +4922,17 @@
# Starts a job to amend format specific options of an existing open block device
# The job is automatically finalized, but a manual job-dismiss is required.
#
-# @job-id: Identifier for the newly created job.
+# @job-id: Identifier for the newly created job.
#
# @node-name: Name of the block node to work on
#
-# @options: Options (driver specific)
+# @options: Options (driver specific)
#
-# @force: Allow unsafe operations, format specific
-# For luks that allows erase of the last active keyslot
-# (permanent loss of data),
-# and replacement of an active keyslot
-# (possible loss of data if IO error happens)
+# @force: Allow unsafe operations, format specific
+# For luks that allows erase of the last active keyslot
+# (permanent loss of data),
+# and replacement of an active keyslot
+# (possible loss of data if IO error happens)
#
# Features:
# @unstable: This command is experimental.
@@ -50,9 +50,9 @@
#
# Type of Floppy drive to be emulated by the Floppy Disk Controller.
#
-# @144: 1.44MB 3.5" drive
-# @288: 2.88MB 3.5" drive
-# @120: 1.2MB 5.25" drive
+# @144: 1.44MB 3.5" drive
+# @288: 2.88MB 3.5" drive
+# @120: 1.2MB 5.25" drive
# @none: No drive connected
# @auto: Automatically determined by inserted media at boot
#
@@ -376,10 +376,10 @@
#
# Configuration info for virtual console chardevs.
#
-# @width: console width, in pixels
+# @width: console width, in pixels
# @height: console height, in pixels
-# @cols: console width, in chars
-# @rows: console height, in chars
+# @cols: console width, in chars
+# @rows: console height, in chars
#
# Since: 1.5
##
@@ -192,12 +192,12 @@
#
# Options to be used for adding a new monitor.
#
-# @id: Name of the monitor
+# @id: Name of the monitor
#
-# @mode: Selects the monitor mode (default: readline in the system
+# @mode: Selects the monitor mode (default: readline in the system
# emulator, control in qemu-storage-daemon)
#
-# @pretty: Enables pretty printing (QMP only)
+# @pretty: Enables pretty printing (QMP only)
#
# @chardev: Name of a character device to expose the monitor on
#
@@ -311,7 +311,7 @@
#
# Defines state of keyslots that are affected by the update
#
-# @active: The slots contain the given password and marked as active
+# @active: The slots contain the given password and marked as active
# @inactive: The slots are erased (contain garbage) and marked as inactive
#
# Since: 5.1
@@ -325,7 +325,7 @@
# This struct defines the update parameters that activate/de-activate set
# of keyslots
#
-# @state: the desired state of the keyslots
+# @state: the desired state of the keyslots
#
# @new-secret: The ID of a QCryptoSecret object providing the password to be
# written into added active keyslots
@@ -334,23 +334,23 @@
# If given will deactivate all keyslots that
# match password located in QCryptoSecret with this ID
#
-# @iter-time: Optional (for activation only)
-# Number of milliseconds to spend in
-# PBKDF passphrase processing for the newly activated keyslot.
-# Currently defaults to 2000.
+# @iter-time: Optional (for activation only)
+# Number of milliseconds to spend in
+# PBKDF passphrase processing for the newly activated keyslot.
+# Currently defaults to 2000.
#
-# @keyslot: Optional. ID of the keyslot to activate/deactivate.
-# For keyslot activation, keyslot should not be active already
-# (this is unsafe to update an active keyslot),
-# but possible if 'force' parameter is given.
-# If keyslot is not given, first free keyslot will be written.
+# @keyslot: Optional. ID of the keyslot to activate/deactivate.
+# For keyslot activation, keyslot should not be active already
+# (this is unsafe to update an active keyslot),
+# but possible if 'force' parameter is given.
+# If keyslot is not given, first free keyslot will be written.
#
-# For keyslot deactivation, this parameter specifies the exact
-# keyslot to deactivate
+# For keyslot deactivation, this parameter specifies the exact
+# keyslot to deactivate
#
-# @secret: Optional. The ID of a QCryptoSecret object providing the
-# password to use to retrieve current master key.
-# Defaults to the same secret that was used to open the image
+# @secret: Optional. The ID of a QCryptoSecret object providing the
+# password to use to retrieve current master key.
+# Defaults to the same secret that was used to open the image
#
# Since 5.1
##
@@ -1191,10 +1191,10 @@
# ask the client to automatically reconnect using the new parameters
# once migration finished successfully. Only implemented for SPICE.
#
-# @protocol: must be "spice"
-# @hostname: migration target hostname
-# @port: spice tcp port for plaintext channels
-# @tls-port: spice tcp port for tls-secured channels
+# @protocol: must be "spice"
+# @hostname: migration target hostname
+# @port: spice tcp port for plaintext channels
+# @tls-port: spice tcp port for tls-secured channels
# @cert-subject: server certificate subject
#
# Since: 0.14
@@ -1018,7 +1018,7 @@
#
# Keyboard input event.
#
-# @key: Which key this event is for.
+# @key: Which key this event is for.
# @down: True for key-down and false for key-up events.
#
# Since: 2.0
@@ -1033,7 +1033,7 @@
# Pointer button input event.
#
# @button: Which button this event is for.
-# @down: True for key-down and false for key-up events.
+# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
@@ -1353,12 +1353,11 @@
#
# Display (user interface) options.
#
-# @type: Which DisplayType qemu should use.
-# @full-screen: Start user interface in fullscreen mode (default: off).
+# @type: Which DisplayType qemu should use.
+# @full-screen: Start user interface in fullscreen mode (default: off).
# @window-close: Allow to quit qemu with window close button (default: on).
-# @show-cursor: Force showing the mouse cursor (default: off).
-# (since: 5.0)
-# @gl: Enable OpenGL support (default: off).
+# @show-cursor: Force showing the mouse cursor (default: off). (since: 5.0)
+# @gl: Enable OpenGL support (default: off).
#
# Since: 2.12
##
Vertical alignment is sacrificed in the process. Signed-off-by: Andrea Bolognani <abologna@redhat.com> --- qapi/block-core.json | 43 +++++++++++++++++++++---------------------- qapi/block.json | 6 +++--- qapi/char.json | 6 +++--- qapi/control.json | 6 +++--- qapi/crypto.json | 32 ++++++++++++++++---------------- qapi/migration.json | 8 ++++---- qapi/ui.json | 13 ++++++------- 7 files changed, 56 insertions(+), 58 deletions(-)