diff mbox series

[v9,04/11] slirp: feature detection for smbd

Message ID 20210126012457.39046-5-j@getutm.app
State New
Headers show
Series iOS and Apple Silicon host support | expand

Commit Message

Joelle van Dyne Jan. 26, 2021, 1:24 a.m. UTC 
Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.

Signed-off-by: Joelle van Dyne <j@getutm.app>
---
 configure   | 22 +++++++++++++++++++++-
 meson.build |  2 +-
 net/slirp.c | 16 ++++++++--------
 3 files changed, 30 insertions(+), 10 deletions(-)

Comments

Philippe Mathieu-Daudé Jan. 26, 2021, 7:30 a.m. UTC | #1 
On 1/26/21 2:24 AM, Joelle van Dyne wrote:
> Replace Windows specific macro with a more generic feature detection
> macro. Allows slirp smb feature to be disabled manually as well.
> 
> Signed-off-by: Joelle van Dyne <j@getutm.app>
> ---
>  configure   | 22 +++++++++++++++++++++-
>  meson.build |  2 +-
>  net/slirp.c | 16 ++++++++--------
>  3 files changed, 30 insertions(+), 10 deletions(-)
> 
> diff --git a/configure b/configure
> index 8d8a4733d7..d72ab22da5 100755
> --- a/configure
> +++ b/configure
> @@ -464,6 +464,7 @@ fuse="auto"
>  fuse_lseek="auto"
>  
>  malloc_trim="auto"
> +slirp_smbd="auto"
>  
>  # parse CC options second
>  for opt do
> @@ -845,7 +846,18 @@ do
>      fi
>  done
>  
> +# Check for smbd dupport
>  : ${smbd=${SMBD-/usr/sbin/smbd}}
> +if test "$slirp_smbd" != "no" ; then

Here slirp_smbd is always "auto".

> +  if test "$mingw32" = "yes" ; then
> +    if test "$slirp_smbd" = "yes" ; then
> +      error_exit "Host smbd not supported on this platform."
> +    fi
> +    slirp_smbd=no
> +  else
> +    slirp_smbd=yes
> +  fi
> +fi

So this check ...

>  
>  # Default objcc to clang if available, otherwise use CC
>  if has clang; then
> @@ -1560,6 +1572,10 @@ for opt do
>    ;;
>    --disable-fuse-lseek) fuse_lseek="disabled"
>    ;;
> +  --enable-slirp-smbd) slirp_smbd=yes
> +  ;;
> +  --disable-slirp-smbd) slirp_smbd=no
> +  ;;
>    *)

... should be placed after the cmdline options processing,
isn't it?
Joelle van Dyne Jan. 28, 2021, 8:33 p.m. UTC | #2 
On Mon, Jan 25, 2021 at 11:30 PM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On 1/26/21 2:24 AM, Joelle van Dyne wrote:
> > Replace Windows specific macro with a more generic feature detection
> > macro. Allows slirp smb feature to be disabled manually as well.
> >
> > Signed-off-by: Joelle van Dyne <j@getutm.app>
> > ---
> >  configure   | 22 +++++++++++++++++++++-
> >  meson.build |  2 +-
> >  net/slirp.c | 16 ++++++++--------
> >  3 files changed, 30 insertions(+), 10 deletions(-)
> >
> > diff --git a/configure b/configure
> > index 8d8a4733d7..d72ab22da5 100755
> > --- a/configure
> > +++ b/configure
> > @@ -464,6 +464,7 @@ fuse="auto"
> >  fuse_lseek="auto"
> >
> >  malloc_trim="auto"
> > +slirp_smbd="auto"
> >
> >  # parse CC options second
> >  for opt do
> > @@ -845,7 +846,18 @@ do
> >      fi
> >  done
> >
> > +# Check for smbd dupport
> >  : ${smbd=${SMBD-/usr/sbin/smbd}}
> > +if test "$slirp_smbd" != "no" ; then
>
> Here slirp_smbd is always "auto".
>
> > +  if test "$mingw32" = "yes" ; then
> > +    if test "$slirp_smbd" = "yes" ; then
> > +      error_exit "Host smbd not supported on this platform."
> > +    fi
> > +    slirp_smbd=no
> > +  else
> > +    slirp_smbd=yes
> > +  fi
> > +fi
>
> So this check ...
>
> >
> >  # Default objcc to clang if available, otherwise use CC
> >  if has clang; then
> > @@ -1560,6 +1572,10 @@ for opt do
> >    ;;
> >    --disable-fuse-lseek) fuse_lseek="disabled"
> >    ;;
> > +  --enable-slirp-smbd) slirp_smbd=yes
> > +  ;;
> > +  --disable-slirp-smbd) slirp_smbd=no
> > +  ;;
> >    *)
>
> ... should be placed after the cmdline options processing,
> isn't it?

That's right, good catch.
>
diff mbox series

Patch

diff --git a/configure b/configure
index 8d8a4733d7..d72ab22da5 100755
--- a/configure
+++ b/configure
@@ -464,6 +464,7 @@  fuse="auto"
 fuse_lseek="auto"
 
 malloc_trim="auto"
+slirp_smbd="auto"
 
 # parse CC options second
 for opt do
@@ -845,7 +846,18 @@  do
     fi
 done
 
+# Check for smbd dupport
 : ${smbd=${SMBD-/usr/sbin/smbd}}
+if test "$slirp_smbd" != "no" ; then
+  if test "$mingw32" = "yes" ; then
+    if test "$slirp_smbd" = "yes" ; then
+      error_exit "Host smbd not supported on this platform."
+    fi
+    slirp_smbd=no
+  else
+    slirp_smbd=yes
+  fi
+fi
 
 # Default objcc to clang if available, otherwise use CC
 if has clang; then
@@ -1560,6 +1572,10 @@  for opt do
   ;;
   --disable-fuse-lseek) fuse_lseek="disabled"
   ;;
+  --enable-slirp-smbd) slirp_smbd=yes
+  ;;
+  --disable-slirp-smbd) slirp_smbd=no
+  ;;
   *)
       echo "ERROR: unknown option $opt"
       echo "Try '$0 --help' for more information"
@@ -1899,6 +1915,7 @@  disabled with --disable-FEATURE, default is enabled if available
   libdaxctl       libdaxctl support
   fuse            FUSE block device export
   fuse-lseek      SEEK_HOLE/SEEK_DATA support for FUSE exports
+  slirp-smbd      use smbd (at path --smbd=*) in slirp networking
 
 NOTE: The object files are built at the place where configure is launched
 EOF
@@ -5573,7 +5590,10 @@  fi
 if test "$guest_agent" = "yes" ; then
   echo "CONFIG_GUEST_AGENT=y" >> $config_host_mak
 fi
-echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
+if test "$slirp_smbd" = "yes" ; then
+  echo "CONFIG_SLIRP_SMBD=y" >> $config_host_mak
+  echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
+fi
 if test "$vde" = "yes" ; then
   echo "CONFIG_VDE=y" >> $config_host_mak
   echo "VDE_LIBS=$vde_libs" >> $config_host_mak
diff --git a/meson.build b/meson.build
index 6818d97df5..f1e67b8cd1 100644
--- a/meson.build
+++ b/meson.build
@@ -2336,7 +2336,7 @@  summary_info += {'sphinx-build':      sphinx_build.found()}
 summary_info += {'genisoimage':       config_host['GENISOIMAGE']}
 # TODO: add back version
 summary_info += {'slirp support':     slirp_opt == 'disabled' ? false : slirp_opt}
-if slirp_opt != 'disabled'
+if slirp_opt != 'disabled' and 'CONFIG_SLIRP_SMBD' in config_host
   summary_info += {'smbd':            config_host['CONFIG_SMBD_COMMAND']}
 endif
 summary_info += {'module support':    config_host.has_key('CONFIG_MODULES')}
diff --git a/net/slirp.c b/net/slirp.c
index 8350c6d45f..4348e74805 100644
--- a/net/slirp.c
+++ b/net/slirp.c
@@ -27,7 +27,7 @@ 
 #include "net/slirp.h"
 
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
 #include <pwd.h>
 #include <sys/wait.h>
 #endif
@@ -90,7 +90,7 @@  typedef struct SlirpState {
     Slirp *slirp;
     Notifier poll_notifier;
     Notifier exit_notifier;
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     gchar *smb_dir;
 #endif
     GSList *fwd;
@@ -103,7 +103,7 @@  static QTAILQ_HEAD(, SlirpState) slirp_stacks =
 static int slirp_hostfwd(SlirpState *s, const char *redir_str, Error **errp);
 static int slirp_guestfwd(SlirpState *s, const char *config_str, Error **errp);
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
 static int slirp_smb(SlirpState *s, const char *exported_dir,
                      struct in_addr vserver_addr, Error **errp);
 static void slirp_smb_cleanup(SlirpState *s);
@@ -367,7 +367,7 @@  static int net_slirp_init(NetClientState *peer, const char *model,
     struct in6_addr ip6_prefix;
     struct in6_addr ip6_host;
     struct in6_addr ip6_dns;
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     struct in_addr smbsrv = { .s_addr = 0 };
 #endif
     NetClientState *nc;
@@ -477,7 +477,7 @@  static int net_slirp_init(NetClientState *peer, const char *model,
         return -1;
     }
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     if (vsmbserver && !inet_aton(vsmbserver, &smbsrv)) {
         error_setg(errp, "Failed to parse SMB address");
         return -1;
@@ -592,7 +592,7 @@  static int net_slirp_init(NetClientState *peer, const char *model,
             }
         }
     }
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     if (smb_export) {
         if (slirp_smb(s, smb_export, smbsrv, errp) < 0) {
             goto error;
@@ -784,7 +784,7 @@  void hmp_hostfwd_add(Monitor *mon, const QDict *qdict)
 
 }
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
 
 /* automatic user mode samba server configuration */
 static void slirp_smb_cleanup(SlirpState *s)
@@ -899,7 +899,7 @@  static int slirp_smb(SlirpState* s, const char *exported_dir,
     return 0;
 }
 
-#endif /* !defined(_WIN32) */
+#endif /* defined(CONFIG_SLIRP_SMBD) */
 
 static int guestfwd_can_read(void *opaque)
 {