diff mbox series

[PULL,22/22] ppc440_pcix: Fix up pci config access

Message ID 20210106033816.232598-23-david@gibson.dropbear.id.au
State New
Headers show
Series [PULL,01/22] hw/ppc/ppc4xx_devs: Make code style fixes to UIC code | expand

Commit Message

David Gibson Jan. 6, 2021, 3:38 a.m. UTC
From: BALATON Zoltan via <qemu-ppc@nongnu.org>

This fixes a long standing issue with MorphOS booting on sam460ex
which turns out to be because of suspicious values written to PCI
config address that apparently works on real machine but caused wrong
access on this device model. This replaces a previous work around for
this with a better fix that makes it work.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <6fd215ab2bc5f8d4455cd20ed1a2f059e4415fe5.1609636173.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 hw/ppc/ppc440_pcix.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/hw/ppc/ppc440_pcix.c b/hw/ppc/ppc440_pcix.c
index 7829d3e556..91cbcd0504 100644
--- a/hw/ppc/ppc440_pcix.c
+++ b/hw/ppc/ppc440_pcix.c
@@ -449,28 +449,35 @@  static AddressSpace *ppc440_pcix_set_iommu(PCIBus *b, void *opaque, int devfn)
     return &s->bm_as;
 }
 
-/* The default pci_host_data_{read,write} functions in pci/pci_host.c
- * deny access to registers without bit 31 set but our clients want
- * this to work so we have to override these here */
-static void pci_host_data_write(void *opaque, hwaddr addr,
-                                uint64_t val, unsigned len)
+/*
+ * Some guests on sam460ex write all kinds of garbage here such as
+ * missing enable bit and low bits set and still expect this to work
+ * (apparently it does on real hardware because these boot there) so
+ * we have to override these ops here and fix it up
+ */
+static void pci_host_config_write(void *opaque, hwaddr addr,
+                                  uint64_t val, unsigned len)
 {
     PCIHostState *s = opaque;
-    pci_data_write(s->bus, s->config_reg | (addr & 3), val, len);
+
+    if (addr != 0 || len != 4) {
+        return;
+    }
+    s->config_reg = (val & 0xfffffffcULL) | (1UL << 31);
 }
 
-static uint64_t pci_host_data_read(void *opaque,
-                                   hwaddr addr, unsigned len)
+static uint64_t pci_host_config_read(void *opaque, hwaddr addr,
+                                     unsigned len)
 {
     PCIHostState *s = opaque;
-    uint32_t val;
-    val = pci_data_read(s->bus, s->config_reg | (addr & 3), len);
+    uint32_t val = s->config_reg;
+
     return val;
 }
 
-const MemoryRegionOps ppc440_pcix_host_data_ops = {
-    .read = pci_host_data_read,
-    .write = pci_host_data_write,
+const MemoryRegionOps ppc440_pcix_host_conf_ops = {
+    .read = pci_host_config_read,
+    .write = pci_host_config_write,
     .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
@@ -497,9 +504,9 @@  static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
     pci_setup_iommu(h->bus, ppc440_pcix_set_iommu, s);
 
     memory_region_init(&s->container, OBJECT(s), "pci-container", PCI_ALL_SIZE);
-    memory_region_init_io(&h->conf_mem, OBJECT(s), &pci_host_conf_le_ops,
+    memory_region_init_io(&h->conf_mem, OBJECT(s), &ppc440_pcix_host_conf_ops,
                           h, "pci-conf-idx", 4);
-    memory_region_init_io(&h->data_mem, OBJECT(s), &ppc440_pcix_host_data_ops,
+    memory_region_init_io(&h->data_mem, OBJECT(s), &pci_host_data_le_ops,
                           h, "pci-conf-data", 4);
     memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
                           "pci.reg", PPC440_REG_SIZE);