diff mbox series

[PULL,42/48] hw/misc/bcm2835_cprman: add sane reset values to the registers

Message ID 20201027114438.17662-43-peter.maydell@linaro.org
State New
Headers show
Series [PULL,01/48] linux-user/aarch64: Reset btype for signals | expand

Commit Message

Peter Maydell Oct. 27, 2020, 11:44 a.m. UTC 
From: Luc Michel <luc@lmichel.fr>

Those reset values have been extracted from a Raspberry Pi 3 model B
v1.2, using the 2020-08-20 version of raspios. The dump was done using
the debugfs interface of the CPRMAN driver in Linux (under
'/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels
and muxes) can be observed by reading the 'regdump' file (e.g.
'plla/regdump').

Those values are set by the Raspberry Pi firmware at boot time (Linux
expects them to be set when it boots up).

Some stages are not exposed by the Linux driver (e.g. the PLL B). For
those, the reset values are unknown and left to 0 which implies a
disabled output.

Once booted in QEMU, the final clock tree is very similar to the one
visible on real hardware. The differences come from some unimplemented
devices for which the driver simply disable the corresponding clock.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/misc/bcm2835_cprman_internals.h | 269 +++++++++++++++++++++
 hw/misc/bcm2835_cprman.c                   |  31 +++
 2 files changed, 300 insertions(+)
diff mbox series

Patch

diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h
index a6e799075f7..339759b3071 100644
--- a/include/hw/misc/bcm2835_cprman_internals.h
+++ b/include/hw/misc/bcm2835_cprman_internals.h
@@ -747,4 +747,273 @@  static inline void set_clock_mux_init_info(BCM2835CprmanState *s,
     mux->frac_bits = CLOCK_MUX_INIT_INFO[id].frac_bits;
 }
 
+
+/*
+ * Object reset info
+ * Those values have been dumped from a Raspberry Pi 3 Model B v1.2 using the
+ * clk debugfs interface in Linux.
+ */
+typedef struct PLLResetInfo {
+    uint32_t cm;
+    uint32_t a2w_ctrl;
+    uint32_t a2w_ana[4];
+    uint32_t a2w_frac;
+} PLLResetInfo;
+
+static const PLLResetInfo PLL_RESET_INFO[] = {
+    [CPRMAN_PLLA] = {
+        .cm = 0x0000008a,
+        .a2w_ctrl = 0x0002103a,
+        .a2w_frac = 0x00098000,
+        .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 }
+    },
+
+    [CPRMAN_PLLC] = {
+        .cm = 0x00000228,
+        .a2w_ctrl = 0x0002103e,
+        .a2w_frac = 0x00080000,
+        .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 }
+    },
+
+    [CPRMAN_PLLD] = {
+        .cm = 0x0000020a,
+        .a2w_ctrl = 0x00021034,
+        .a2w_frac = 0x00015556,
+        .a2w_ana = { 0x00000000, 0x00144000, 0x00000000, 0x00000100 }
+    },
+
+    [CPRMAN_PLLH] = {
+        .cm = 0x00000000,
+        .a2w_ctrl = 0x0002102d,
+        .a2w_frac = 0x00000000,
+        .a2w_ana = { 0x00900000, 0x0000000c, 0x00000000, 0x00000000 }
+    },
+
+    [CPRMAN_PLLB] = {
+        /* unknown */
+        .cm = 0x00000000,
+        .a2w_ctrl = 0x00000000,
+        .a2w_frac = 0x00000000,
+        .a2w_ana = { 0x00000000, 0x00000000, 0x00000000, 0x00000000 }
+    }
+};
+
+typedef struct PLLChannelResetInfo {
+    /*
+     * Even though a PLL channel has a CM register, it shares it with its
+     * parent PLL. The parent already takes care of the reset value.
+     */
+    uint32_t a2w_ctrl;
+} PLLChannelResetInfo;
+
+static const PLLChannelResetInfo PLL_CHANNEL_RESET_INFO[] = {
+    [CPRMAN_PLLA_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 },
+    [CPRMAN_PLLA_CHANNEL_CORE] = { .a2w_ctrl = 0x00000003 },
+    [CPRMAN_PLLA_CHANNEL_PER] = { .a2w_ctrl = 0x00000000 }, /* unknown */
+    [CPRMAN_PLLA_CHANNEL_CCP2] = { .a2w_ctrl = 0x00000100 },
+
+    [CPRMAN_PLLC_CHANNEL_CORE2] = { .a2w_ctrl = 0x00000100 },
+    [CPRMAN_PLLC_CHANNEL_CORE1] = { .a2w_ctrl = 0x00000100 },
+    [CPRMAN_PLLC_CHANNEL_PER] = { .a2w_ctrl = 0x00000002 },
+    [CPRMAN_PLLC_CHANNEL_CORE0] = { .a2w_ctrl = 0x00000002 },
+
+    [CPRMAN_PLLD_CHANNEL_DSI0] = { .a2w_ctrl = 0x00000100 },
+    [CPRMAN_PLLD_CHANNEL_CORE] = { .a2w_ctrl = 0x00000004 },
+    [CPRMAN_PLLD_CHANNEL_PER] = { .a2w_ctrl = 0x00000004 },
+    [CPRMAN_PLLD_CHANNEL_DSI1] = { .a2w_ctrl = 0x00000100 },
+
+    [CPRMAN_PLLH_CHANNEL_AUX] = { .a2w_ctrl = 0x00000004 },
+    [CPRMAN_PLLH_CHANNEL_RCAL] = { .a2w_ctrl = 0x00000000 },
+    [CPRMAN_PLLH_CHANNEL_PIX] = { .a2w_ctrl = 0x00000000 },
+
+    [CPRMAN_PLLB_CHANNEL_ARM] = { .a2w_ctrl = 0x00000000 }, /* unknown */
+};
+
+typedef struct ClockMuxResetInfo {
+    uint32_t cm_ctl;
+    uint32_t cm_div;
+} ClockMuxResetInfo;
+
+static const ClockMuxResetInfo CLOCK_MUX_RESET_INFO[] = {
+    [CPRMAN_CLOCK_GNRIC] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_VPU] = {
+        .cm_ctl = 0x00000245,
+        .cm_div = 0x00003000,
+    },
+
+    [CPRMAN_CLOCK_SYS] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_PERIA] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_PERII] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_H264] = {
+        .cm_ctl = 0x00000244,
+        .cm_div = 0x00003000,
+    },
+
+    [CPRMAN_CLOCK_ISP] = {
+        .cm_ctl = 0x00000244,
+        .cm_div = 0x00003000,
+    },
+
+    [CPRMAN_CLOCK_V3D] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_CAM0] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_CAM1] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_CCP2] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_DSI0E] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_DSI0P] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_DPI] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_GP0] = {
+        .cm_ctl = 0x00000200,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_GP1] = {
+        .cm_ctl = 0x00000096,
+        .cm_div = 0x00014000,
+    },
+
+    [CPRMAN_CLOCK_GP2] = {
+        .cm_ctl = 0x00000291,
+        .cm_div = 0x00249f00,
+    },
+
+    [CPRMAN_CLOCK_HSM] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_OTP] = {
+        .cm_ctl = 0x00000091,
+        .cm_div = 0x00004000,
+    },
+
+    [CPRMAN_CLOCK_PCM] = {
+        .cm_ctl = 0x00000200,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_PWM] = {
+        .cm_ctl = 0x00000200,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_SLIM] = {
+        .cm_ctl = 0x00000200,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_SMI] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_TEC] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_TD0] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_TD1] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_TSENS] = {
+        .cm_ctl = 0x00000091,
+        .cm_div = 0x0000a000,
+    },
+
+    [CPRMAN_CLOCK_TIMER] = {
+        .cm_ctl = 0x00000291,
+        .cm_div = 0x00013333,
+    },
+
+    [CPRMAN_CLOCK_UART] = {
+        .cm_ctl = 0x00000296,
+        .cm_div = 0x0000a6ab,
+    },
+
+    [CPRMAN_CLOCK_VEC] = {
+        .cm_ctl = 0x00000097,
+        .cm_div = 0x00002000,
+    },
+
+    [CPRMAN_CLOCK_PULSE] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_SDC] = {
+        .cm_ctl = 0x00004006,
+        .cm_div = 0x00003000,
+    },
+
+    [CPRMAN_CLOCK_ARM] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+
+    [CPRMAN_CLOCK_AVEO] = {
+        .cm_ctl = 0x00000000,
+        .cm_div = 0x00000000,
+    },
+
+    [CPRMAN_CLOCK_EMMC] = {
+        .cm_ctl = 0x00000295,
+        .cm_div = 0x00006000,
+    },
+
+    [CPRMAN_CLOCK_EMMC2] = {
+        .cm_ctl = 0, /* unknown */
+        .cm_div = 0
+    },
+};
+
 #endif
diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c
index 7a7401963d5..7e415a017c9 100644
--- a/hw/misc/bcm2835_cprman.c
+++ b/hw/misc/bcm2835_cprman.c
@@ -53,6 +53,17 @@ 
 
 /* PLL */
 
+static void pll_reset(DeviceState *dev)
+{
+    CprmanPllState *s = CPRMAN_PLL(dev);
+    const PLLResetInfo *info = &PLL_RESET_INFO[s->id];
+
+    *s->reg_cm = info->cm;
+    *s->reg_a2w_ctrl = info->a2w_ctrl;
+    memcpy(s->reg_a2w_ana, info->a2w_ana, sizeof(info->a2w_ana));
+    *s->reg_a2w_frac = info->a2w_frac;
+}
+
 static bool pll_is_locked(const CprmanPllState *pll)
 {
     return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN)
@@ -123,6 +134,7 @@  static void pll_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    dc->reset = pll_reset;
     dc->vmsd = &pll_vmstate;
 }
 
@@ -137,6 +149,14 @@  static const TypeInfo cprman_pll_info = {
 
 /* PLL channel */
 
+static void pll_channel_reset(DeviceState *dev)
+{
+    CprmanPllChannelState *s = CPRMAN_PLL_CHANNEL(dev);
+    const PLLChannelResetInfo *info = &PLL_CHANNEL_RESET_INFO[s->id];
+
+    *s->reg_a2w_ctrl = info->a2w_ctrl;
+}
+
 static bool pll_channel_is_enabled(CprmanPllChannelState *channel)
 {
     /*
@@ -217,6 +237,7 @@  static void pll_channel_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    dc->reset = pll_channel_reset;
     dc->vmsd = &pll_channel_vmstate;
 }
 
@@ -295,6 +316,15 @@  static void clock_mux_src_update(void *opaque)
     clock_mux_update(s);
 }
 
+static void clock_mux_reset(DeviceState *dev)
+{
+    CprmanClockMuxState *clock = CPRMAN_CLOCK_MUX(dev);
+    const ClockMuxResetInfo *info = &CLOCK_MUX_RESET_INFO[clock->id];
+
+    *clock->reg_ctl = info->cm_ctl;
+    *clock->reg_div = info->cm_div;
+}
+
 static void clock_mux_init(Object *obj)
 {
     CprmanClockMuxState *s = CPRMAN_CLOCK_MUX(obj);
@@ -327,6 +357,7 @@  static void clock_mux_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
+    dc->reset = clock_mux_reset;
     dc->vmsd = &clock_mux_vmstate;
 }