diff mbox series

[PULL,15/17] disas/: fix some comment spelling errors

Message ID 20200919184451.2129349-16-laurent@vivier.eu
State New
Headers show
Series [PULL,01/17] hw/gpio/max7310: Remove impossible check | expand

Commit Message

Laurent Vivier Sept. 19, 2020, 6:44 p.m. UTC 
From: zhaolichang <zhaolichang@huawei.com>

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the disas folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 disas/hppa.c | 2 +-
 disas/m68k.c | 8 ++++----
 disas/ppc.c  | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/disas/hppa.c b/disas/hppa.c
index 2dbd1fc4454e..dcf9a47f3489 100644
--- a/disas/hppa.c
+++ b/disas/hppa.c
@@ -2021,7 +2021,7 @@  print_insn_hppa (bfd_vma memaddr, disassemble_info *info)
 			fput_fp_reg (GET_FIELD (insn, 6, 10), info);
 		      break;
 
-		      /* 'fA' will not generate a space before the regsiter
+		      /* 'fA' will not generate a space before the register
 			 name.  Normally that is fine.  Except that it
 			 causes problems with xmpyu which has no FP format
 			 completer.  */
diff --git a/disas/m68k.c b/disas/m68k.c
index 863409c67ccb..aefaecfbd6cb 100644
--- a/disas/m68k.c
+++ b/disas/m68k.c
@@ -70,7 +70,7 @@  struct floatformat
   unsigned int exp_start;
   unsigned int exp_len;
   /* Bias added to a "true" exponent to form the biased exponent.  It
-     is intentionally signed as, otherwize, -exp_bias can turn into a
+     is intentionally signed as, otherwise, -exp_bias can turn into a
      very large number (e.g., given the exp_bias of 0x3fff and a 64
      bit long, the equation (long)(1 - exp_bias) evaluates to
      4294950914) instead of -16382).  */
@@ -479,7 +479,7 @@  struct m68k_opcode_alias
       and remaining 3 bits of register shifted 9 bits in first word.
       Indicate upper/lower in 1 bit shifted 7 bits in second word.
       Use with `R' or `u' format.
-   n  `m' withouth upper/lower indication. (For M[S]ACx; 4 bits split
+   n  `m' without upper/lower indication. (For M[S]ACx; 4 bits split
       with MSB shifted 6 bits in first word and remaining 3 bits of
       register shifted 9 bits in first word.  No upper/lower
       indication is done.)  Use with `R' or `u' format.
@@ -854,7 +854,7 @@  fetch_arg (unsigned char *buffer,
 
 /* Check if an EA is valid for a particular code.  This is required
    for the EMAC instructions since the type of source address determines
-   if it is a EMAC-load instruciton if the EA is mode 2-5, otherwise it
+   if it is a EMAC-load instruction if the EA is mode 2-5, otherwise it
    is a non-load EMAC instruction and the bits mean register Ry.
    A similar case exists for the movem instructions where the register
    mask is interpreted differently for different EAs.  */
@@ -1080,7 +1080,7 @@  print_indexed (int basereg,
 
 /* Returns number of bytes "eaten" by the operand, or
    return -1 if an invalid operand was found, or -2 if
-   an opcode tabe error was found.
+   an opcode table error was found.
    ADDR is the pc for this arg to be relative to.  */
 
 static int
diff --git a/disas/ppc.c b/disas/ppc.c
index 63e97cfe1da2..02be87819832 100644
--- a/disas/ppc.c
+++ b/disas/ppc.c
@@ -5226,7 +5226,7 @@  operand_value_powerpc (const struct powerpc_operand *operand,
       if ((operand->flags & PPC_OPERAND_SIGNED) != 0)
 	{
 	  /* BITM is always some number of zeros followed by some
-	     number of ones, followed by some numer of zeros.  */
+	     number of ones, followed by some number of zeros.  */
 	  unsigned long top = operand->bitm;
 	  /* top & -top gives the rightmost 1 bit, so this
 	     fills in any trailing zeros.  */