diff mbox series

[v6,7/8] sparc/sun4m: Use start-powered-off CPUState property

Message ID 20200819164306.625357-8-bauerman@linux.ibm.com
State New
Headers show
Series Generalize start-powered-off property from ARM | expand

Commit Message

Thiago Jung Bauermann Aug. 19, 2020, 4:43 p.m. UTC 
Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.

This makes secondary_cpu_reset() unnecessary, so remove it.

Also remove setting of cs->halted from cpu_devinit(), which seems out of
place when compared to similar code in other architectures (e.g.,
ppce500_init() in hw/ppc/e500.c).

Finally, change creation of CPU object from cpu_create() to object_new()
and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's
not possible to set a property after the object is realized.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
---
 hw/sparc/sun4m.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

Comments

Philippe Mathieu-Daudé Aug. 19, 2020, 5:03 p.m. UTC | #1 
On 8/19/20 6:43 PM, Thiago Jung Bauermann wrote:
> Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the
> start-powered-off property which makes cpu_common_reset() initialize it
> to 1 in common code.
> 
> This makes secondary_cpu_reset() unnecessary, so remove it.
> 
> Also remove setting of cs->halted from cpu_devinit(), which seems out of
> place when compared to similar code in other architectures (e.g.,
> ppce500_init() in hw/ppc/e500.c).
> 
> Finally, change creation of CPU object from cpu_create() to object_new()
> and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's
> not possible to set a property after the object is realized.
> 
> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

> ---
>  hw/sparc/sun4m.c | 20 ++++----------------
>  1 file changed, 4 insertions(+), 16 deletions(-)
> 
> diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
> index 22c51dac8a..23991ccd47 100644
> --- a/hw/sparc/sun4m.c
> +++ b/hw/sparc/sun4m.c
> @@ -218,15 +218,6 @@ static void dummy_cpu_set_irq(void *opaque, int irq, int level)
>  {
>  }
>  
> -static void secondary_cpu_reset(void *opaque)
> -{
> -    SPARCCPU *cpu = opaque;
> -    CPUState *cs = CPU(cpu);
> -
> -    cpu_reset(cs);
> -    cs->halted = 1;
> -}
> -
>  static void cpu_halt_signal(void *opaque, int irq, int level)
>  {
>      if (level && current_cpu) {
> @@ -810,19 +801,16 @@ static const TypeInfo ram_info = {
>  static void cpu_devinit(const char *cpu_type, unsigned int id,
>                          uint64_t prom_addr, qemu_irq **cpu_irqs)
>  {
> -    CPUState *cs;
>      SPARCCPU *cpu;
>      CPUSPARCState *env;
>  
> -    cpu = SPARC_CPU(cpu_create(cpu_type));
> +    cpu = SPARC_CPU(object_new(cpu_type));
>      env = &cpu->env;
>  
>      cpu_sparc_set_id(env, id);
> -    if (id != 0) {
> -        qemu_register_reset(secondary_cpu_reset, cpu);
> -        cs = CPU(cpu);
> -        cs->halted = 1;
> -    }
> +    object_property_set_bool(OBJECT(cpu), "start-powered-off", id != 0,
> +                             &error_fatal);
> +    qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);
>      *cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);
>      env->prom_addr = prom_addr;
>  }
>
Thiago Jung Bauermann Aug. 19, 2020, 11:54 p.m. UTC | #2 
Philippe Mathieu-Daudé <philmd@redhat.com> writes:

> On 8/19/20 6:43 PM, Thiago Jung Bauermann wrote:
>> Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the
>> start-powered-off property which makes cpu_common_reset() initialize it
>> to 1 in common code.
>> 
>> This makes secondary_cpu_reset() unnecessary, so remove it.
>> 
>> Also remove setting of cs->halted from cpu_devinit(), which seems out of
>> place when compared to similar code in other architectures (e.g.,
>> ppce500_init() in hw/ppc/e500.c).
>> 
>> Finally, change creation of CPU object from cpu_create() to object_new()
>> and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's
>> not possible to set a property after the object is realized.
>> 
>> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Thanks!
diff mbox series

Patch

diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
index 22c51dac8a..23991ccd47 100644
--- a/hw/sparc/sun4m.c
+++ b/hw/sparc/sun4m.c
@@ -218,15 +218,6 @@  static void dummy_cpu_set_irq(void *opaque, int irq, int level)
 {
 }
 
-static void secondary_cpu_reset(void *opaque)
-{
-    SPARCCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    cpu_reset(cs);
-    cs->halted = 1;
-}
-
 static void cpu_halt_signal(void *opaque, int irq, int level)
 {
     if (level && current_cpu) {
@@ -810,19 +801,16 @@  static const TypeInfo ram_info = {
 static void cpu_devinit(const char *cpu_type, unsigned int id,
                         uint64_t prom_addr, qemu_irq **cpu_irqs)
 {
-    CPUState *cs;
     SPARCCPU *cpu;
     CPUSPARCState *env;
 
-    cpu = SPARC_CPU(cpu_create(cpu_type));
+    cpu = SPARC_CPU(object_new(cpu_type));
     env = &cpu->env;
 
     cpu_sparc_set_id(env, id);
-    if (id != 0) {
-        qemu_register_reset(secondary_cpu_reset, cpu);
-        cs = CPU(cpu);
-        cs->halted = 1;
-    }
+    object_property_set_bool(OBJECT(cpu), "start-powered-off", id != 0,
+                             &error_fatal);
+    qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);
     *cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);
     env->prom_addr = prom_addr;
 }