Message ID | 20200620230719.32139-7-f4bug@amsat.org |
---|---|
State | New |
Headers | show |
Series | hw/misc: Add LED device | expand |
On 6/21/20 1:07 AM, Philippe Mathieu-Daudé wrote: > Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical > Reference Manual' (100112_0200_07_en): > > 2.1 Overview of the MPS2 and MPS2+ hardware > > The MPS2 and MPS2+ FPGA Prototyping Boards contain the > following components and interfaces: > > * User switches and user LEDs: > > - Two green LEDs and two push buttons that connect to > the FPGA. > - Eight green LEDs and one 8-way dip switch that connect > to the MCC. > > Add the 8 LEDs connected to the MCC. > > This remplaces the 'mps2_scc_leds' trace events by the generic > 'led_set_intensity' event. > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > --- > https://youtu.be/l9kD70uPchk?t=288 > --- > include/hw/misc/mps2-scc.h | 1 + > hw/misc/mps2-scc.c | 23 ++++++++++++----------- > hw/misc/Kconfig | 1 + > hw/misc/trace-events | 1 - > 4 files changed, 14 insertions(+), 12 deletions(-) > > diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h > index 7045473788..29e12b832b 100644 > --- a/include/hw/misc/mps2-scc.h > +++ b/include/hw/misc/mps2-scc.h > @@ -25,6 +25,7 @@ typedef struct { > > /*< public >*/ > MemoryRegion iomem; > + DeviceState *led[8]; > > uint32_t cfg0; > uint32_t cfg1; > diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c > index 9d0909e7b3..2e59a382ec 100644 > --- a/hw/misc/mps2-scc.c > +++ b/hw/misc/mps2-scc.c > @@ -20,11 +20,13 @@ > #include "qemu/osdep.h" > #include "qemu/log.h" > #include "qemu/module.h" > +#include "qemu/bitops.h" > #include "trace.h" > #include "hw/sysbus.h" > #include "migration/vmstate.h" > #include "hw/registerfields.h" > #include "hw/misc/mps2-scc.h" > +#include "hw/misc/led.h" > #include "hw/qdev-properties.h" > > REG32(CFG0, 0) > @@ -152,18 +154,10 @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, > s->cfg0 = value; > break; > case A_CFG1: > - /* CFG1 bits [7:0] control the board LEDs. We don't currently have > - * a mechanism for displaying this graphically, so use a trace event. > - */ > - trace_mps2_scc_leds(value & 0x80 ? '*' : '.', > - value & 0x40 ? '*' : '.', > - value & 0x20 ? '*' : '.', > - value & 0x10 ? '*' : '.', > - value & 0x08 ? '*' : '.', > - value & 0x04 ? '*' : '.', > - value & 0x02 ? '*' : '.', > - value & 0x01 ? '*' : '.'); > s->cfg1 = value; > + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { > + led_set_state(LED(s->led[i]), !!extract32(value, i, 1)); > + } > break; > case A_CFGDATA_OUT: > s->cfgdata_out = value; > @@ -245,6 +239,13 @@ static void mps2_scc_init(Object *obj) > > memory_region_init_io(&s->iomem, obj, &mps2_scc_ops, s, "mps2-scc", 0x1000); > sysbus_init_mmio(sbd, &s->iomem); > + > + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { > + char *name = g_strdup_printf("SCC LED%zu", i); > + s->led[i] = create_led(obj, LED_COLOR_GREEN, > + name, LED_RESET_INTENSITY_ACTIVE_HIGH); > + g_free(name); > + } This has to go ... > } > > static void mps2_scc_realize(DeviceState *dev, Error **errp) ... here to avoid: ** ERROR:/tmp/qemu-test/src/hw/core/qdev.c:1074:device_finalize: assertion failed: (dev->canonical_path) Broken pipe /tmp/qemu-test/src/tests/qtest/libqtest.c:175: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped) ERROR - too few tests run (expected 6, got 5) > diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig > index 889757731b..f278f7f354 100644 > --- a/hw/misc/Kconfig > +++ b/hw/misc/Kconfig > @@ -97,6 +97,7 @@ config MPS2_FPGAIO > > config MPS2_SCC > bool > + select LED > > config TZ_MPC > bool > diff --git a/hw/misc/trace-events b/hw/misc/trace-events > index 8bc7a675e8..490a0f341a 100644 > --- a/hw/misc/trace-events > +++ b/hw/misc/trace-events > @@ -81,7 +81,6 @@ aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 > mps2_scc_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" > mps2_scc_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" > mps2_scc_reset(void) "MPS2 SCC: reset" > -mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c" > mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 > mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 > >
On 6/20/20 4:07 PM, Philippe Mathieu-Daudé wrote: > @@ -25,6 +25,7 @@ typedef struct { > > /*< public >*/ > MemoryRegion iomem; > + DeviceState *led[8]; LEDState? > + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { > + led_set_state(LED(s->led[i]), !!extract32(value, i, 1)); > + } No need for !!. r~
diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h index 7045473788..29e12b832b 100644 --- a/include/hw/misc/mps2-scc.h +++ b/include/hw/misc/mps2-scc.h @@ -25,6 +25,7 @@ typedef struct { /*< public >*/ MemoryRegion iomem; + DeviceState *led[8]; uint32_t cfg0; uint32_t cfg1; diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index 9d0909e7b3..2e59a382ec 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -20,11 +20,13 @@ #include "qemu/osdep.h" #include "qemu/log.h" #include "qemu/module.h" +#include "qemu/bitops.h" #include "trace.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "hw/registerfields.h" #include "hw/misc/mps2-scc.h" +#include "hw/misc/led.h" #include "hw/qdev-properties.h" REG32(CFG0, 0) @@ -152,18 +154,10 @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, s->cfg0 = value; break; case A_CFG1: - /* CFG1 bits [7:0] control the board LEDs. We don't currently have - * a mechanism for displaying this graphically, so use a trace event. - */ - trace_mps2_scc_leds(value & 0x80 ? '*' : '.', - value & 0x40 ? '*' : '.', - value & 0x20 ? '*' : '.', - value & 0x10 ? '*' : '.', - value & 0x08 ? '*' : '.', - value & 0x04 ? '*' : '.', - value & 0x02 ? '*' : '.', - value & 0x01 ? '*' : '.'); s->cfg1 = value; + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + led_set_state(LED(s->led[i]), !!extract32(value, i, 1)); + } break; case A_CFGDATA_OUT: s->cfgdata_out = value; @@ -245,6 +239,13 @@ static void mps2_scc_init(Object *obj) memory_region_init_io(&s->iomem, obj, &mps2_scc_ops, s, "mps2-scc", 0x1000); sysbus_init_mmio(sbd, &s->iomem); + + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + char *name = g_strdup_printf("SCC LED%zu", i); + s->led[i] = create_led(obj, LED_COLOR_GREEN, + name, LED_RESET_INTENSITY_ACTIVE_HIGH); + g_free(name); + } } static void mps2_scc_realize(DeviceState *dev, Error **errp) diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index 889757731b..f278f7f354 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -97,6 +97,7 @@ config MPS2_FPGAIO config MPS2_SCC bool + select LED config TZ_MPC bool diff --git a/hw/misc/trace-events b/hw/misc/trace-events index 8bc7a675e8..490a0f341a 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -81,7 +81,6 @@ aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 mps2_scc_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" mps2_scc_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" mps2_scc_reset(void) "MPS2 SCC: reset" -mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c" mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This remplaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- https://youtu.be/l9kD70uPchk?t=288 --- include/hw/misc/mps2-scc.h | 1 + hw/misc/mps2-scc.c | 23 ++++++++++++----------- hw/misc/Kconfig | 1 + hw/misc/trace-events | 1 - 4 files changed, 14 insertions(+), 12 deletions(-)