Message ID | 20200526094052.1723-3-f4bug@amsat.org |
---|---|
State | New |
Headers | show |
Series | hw/m68k/mcf52xx: Replace hw_error() by qemu_log_mask() | expand |
Am Tue, 26 May 2020 11:40:52 +0200 schrieb Philippe Mathieu-Daudé <f4bug@amsat.org>: > hw_error() calls exit(). This a bit overkill when we can log > the accesses as unimplemented or guest error. > > When fuzzing the devices, we don't want the whole process to > exit. Replace some hw_error() calls by qemu_log_mask(). > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [...] > diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c > index b84c152ce3..108623b4ad 100644 > --- a/hw/m68k/mcf5208.c > +++ b/hw/m68k/mcf5208.c > @@ -9,10 +9,10 @@ > #include "qemu/osdep.h" > #include "qemu/units.h" > #include "qemu/error-report.h" > +#include "qemu/log.h" > #include "qapi/error.h" > #include "qemu-common.h" > #include "cpu.h" > -#include "hw/hw.h" > #include "hw/irq.h" > #include "hw/m68k/mcf.h" > #include "hw/m68k/mcf_fec.h" > @@ -111,8 +111,9 @@ static void m5208_timer_write(void *opaque, > hwaddr offset, case 4: > break; > default: > - hw_error("m5208_timer_write: Bad offset 0x%x\n", > (int)offset); > - break; > + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" PRIx64 > "\n", That likely should be HWADDR_PRIX, too? ... could be fixed up while applying the patch. With that: Reviewed-by: Thomas Huth <huth@tuxfamily.org> > + __func__, offset); > + return; > } > m5208_timer_update(s); > } > @@ -136,7 +137,8 @@ static uint64_t m5208_timer_read(void *opaque, > hwaddr addr, case 4: > return ptimer_get_count(s->timer); > default: > - hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr); > + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" > HWADDR_PRIX "\n", > + __func__, addr); > return 0; > } > } > @@ -164,7 +166,8 @@ static uint64_t m5208_sys_read(void *opaque, > hwaddr addr, return 0; > > default: > - hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr); > + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" > HWADDR_PRIX "\n", > + __func__, addr); > return 0; > } > } > @@ -172,7 +175,8 @@ static uint64_t m5208_sys_read(void *opaque, > hwaddr addr, static void m5208_sys_write(void *opaque, hwaddr addr, > uint64_t value, unsigned size) > { > - hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr); > + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX > "\n", > + __func__, addr); > }
On 5/26/20 6:04 PM, Thomas Huth wrote: > Am Tue, 26 May 2020 11:40:52 +0200 > schrieb Philippe Mathieu-Daudé <f4bug@amsat.org>: > >> hw_error() calls exit(). This a bit overkill when we can log >> the accesses as unimplemented or guest error. >> >> When fuzzing the devices, we don't want the whole process to >> exit. Replace some hw_error() calls by qemu_log_mask(). >> >> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > [...] >> diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c >> index b84c152ce3..108623b4ad 100644 >> --- a/hw/m68k/mcf5208.c >> +++ b/hw/m68k/mcf5208.c >> @@ -9,10 +9,10 @@ >> #include "qemu/osdep.h" >> #include "qemu/units.h" >> #include "qemu/error-report.h" >> +#include "qemu/log.h" >> #include "qapi/error.h" >> #include "qemu-common.h" >> #include "cpu.h" >> -#include "hw/hw.h" >> #include "hw/irq.h" >> #include "hw/m68k/mcf.h" >> #include "hw/m68k/mcf_fec.h" >> @@ -111,8 +111,9 @@ static void m5208_timer_write(void *opaque, >> hwaddr offset, case 4: >> break; >> default: >> - hw_error("m5208_timer_write: Bad offset 0x%x\n", >> (int)offset); >> - break; >> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" PRIx64 >> "\n", > > That likely should be HWADDR_PRIX, too? ... could be fixed up while > applying the patch. Oops yes. Thanks a lot! > > With that: > Reviewed-by: Thomas Huth <huth@tuxfamily.org> > > >> + __func__, offset); >> + return; >> } >> m5208_timer_update(s); >> } >> @@ -136,7 +137,8 @@ static uint64_t m5208_timer_read(void *opaque, >> hwaddr addr, case 4: >> return ptimer_get_count(s->timer); >> default: >> - hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr); >> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" >> HWADDR_PRIX "\n", >> + __func__, addr); >> return 0; >> } >> } >> @@ -164,7 +166,8 @@ static uint64_t m5208_sys_read(void *opaque, >> hwaddr addr, return 0; >> >> default: >> - hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr); >> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" >> HWADDR_PRIX "\n", >> + __func__, addr); >> return 0; >> } >> } >> @@ -172,7 +175,8 @@ static uint64_t m5208_sys_read(void *opaque, >> hwaddr addr, static void m5208_sys_write(void *opaque, hwaddr addr, >> uint64_t value, unsigned size) >> { >> - hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr); >> + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX >> "\n", >> + __func__, addr); >> } >
diff --git a/hw/m68k/mcf5206.c b/hw/m68k/mcf5206.c index 187291e1f6..a2fef04f8e 100644 --- a/hw/m68k/mcf5206.c +++ b/hw/m68k/mcf5206.c @@ -8,6 +8,7 @@ #include "qemu/osdep.h" #include "qemu/error-report.h" +#include "qemu/log.h" #include "cpu.h" #include "hw/hw.h" #include "hw/irq.h" @@ -225,7 +226,8 @@ static void m5206_mbar_update(m5206_mbar_state *s) break; default: /* Unknown vector. */ - error_report("Unhandled vector for IRQ %d", irq); + qemu_log_mask(LOG_UNIMP, "%s: Unhandled vector for IRQ %d\n", + __func__, irq); vector = 0xf; break; } @@ -306,7 +308,8 @@ static uint64_t m5206_mbar_read(m5206_mbar_state *s, case 0x170: return s->uivr[0]; case 0x1b0: return s->uivr[1]; } - hw_error("Bad MBAR read offset 0x%"PRIx16, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad MBAR offset 0x%"PRIx16"\n", + __func__, offset); return 0; } @@ -360,7 +363,8 @@ static void m5206_mbar_write(m5206_mbar_state *s, uint16_t offset, s->uivr[1] = value; break; default: - hw_error("Bad MBAR write offset 0x%"PRIx16, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad MBAR offset 0x%"PRIx16"\n", + __func__, offset); break; } } diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c index b84c152ce3..108623b4ad 100644 --- a/hw/m68k/mcf5208.c +++ b/hw/m68k/mcf5208.c @@ -9,10 +9,10 @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qemu/error-report.h" +#include "qemu/log.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" -#include "hw/hw.h" #include "hw/irq.h" #include "hw/m68k/mcf.h" #include "hw/m68k/mcf_fec.h" @@ -111,8 +111,9 @@ static void m5208_timer_write(void *opaque, hwaddr offset, case 4: break; default: - hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset); - break; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" PRIx64 "\n", + __func__, offset); + return; } m5208_timer_update(s); } @@ -136,7 +137,8 @@ static uint64_t m5208_timer_read(void *opaque, hwaddr addr, case 4: return ptimer_get_count(s->timer); default: - hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, addr); return 0; } } @@ -164,7 +166,8 @@ static uint64_t m5208_sys_read(void *opaque, hwaddr addr, return 0; default: - hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, addr); return 0; } } @@ -172,7 +175,8 @@ static uint64_t m5208_sys_read(void *opaque, hwaddr addr, static void m5208_sys_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, addr); } static const MemoryRegionOps m5208_sys_ops = { diff --git a/hw/m68k/mcf_intc.c b/hw/m68k/mcf_intc.c index d9e03a06ab..bc20742d9a 100644 --- a/hw/m68k/mcf_intc.c +++ b/hw/m68k/mcf_intc.c @@ -8,6 +8,7 @@ #include "qemu/osdep.h" #include "qemu/module.h" +#include "qemu/log.h" #include "cpu.h" #include "hw/hw.h" #include "hw/irq.h" @@ -80,7 +81,9 @@ static uint64_t mcf_intc_read(void *opaque, hwaddr addr, case 0xe1: case 0xe2: case 0xe3: case 0xe4: case 0xe5: case 0xe6: case 0xe7: /* LnIACK */ - hw_error("mcf_intc_read: LnIACK not implemented\n"); + qemu_log_mask(LOG_UNIMP, "%s: LnIACK not implemented (offset 0x%02x)\n", + __func__, offset); + /* fallthru */ default: return 0; } @@ -127,8 +130,9 @@ static void mcf_intc_write(void *opaque, hwaddr addr, } break; default: - hw_error("mcf_intc_write: Bad write offset %d\n", offset); - break; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%02x\n", + __func__, offset); + return; } mcf_intc_update(s); } diff --git a/hw/net/mcf_fec.c b/hw/net/mcf_fec.c index 9327ac8a30..281345862c 100644 --- a/hw/net/mcf_fec.c +++ b/hw/net/mcf_fec.c @@ -7,7 +7,7 @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "net/net.h" #include "qemu/module.h" @@ -392,7 +392,8 @@ static uint64_t mcf_fec_read(void *opaque, hwaddr addr, case 0x188: return s->emrbr; case 0x200 ... 0x2e0: return s->mib[(addr & 0x1ff) / 4]; default: - hw_error("mcf_fec_read: Bad address 0x%x\n", (int)addr); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address 0x%" HWADDR_PRIX "\n", + __func__, addr); return 0; } } @@ -492,7 +493,9 @@ static void mcf_fec_write(void *opaque, hwaddr addr, s->mib[(addr & 0x1ff) / 4] = value; break; default: - hw_error("mcf_fec_write Bad address 0x%x\n", (int)addr); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address 0x%" HWADDR_PRIX "\n", + __func__, addr); + return; } mcf_fec_update(s); }
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/m68k/mcf5206.c | 10 +++++++--- hw/m68k/mcf5208.c | 16 ++++++++++------ hw/m68k/mcf_intc.c | 10 +++++++--- hw/net/mcf_fec.c | 9 ++++++--- 4 files changed, 30 insertions(+), 15 deletions(-)