| Message ID | 20200507134205.7559-2-gengdongjiu@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add ARMv8 RAS virtualization support in QEMU | expand |
On 5/7/20 3:41 PM, Dongjiu Geng wrote: > The little end UUID is used in many places, so make > NVDIMM_UUID_LE to a common macro to convert the UUID > to a little end array. > > Reviewed-by: Xiang Zheng <zhengxiang9@huawei.com> > Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> > --- > Change since v25: > 1. Address Peter's comments to add a proper doc-comment comment for > UUID_LE macros. > --- > hw/acpi/nvdimm.c | 10 +++------- > include/qemu/uuid.h | 26 ++++++++++++++++++++++++++ > slirp | 2 +- > 3 files changed, 30 insertions(+), 8 deletions(-) > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > index fa7bf8b..9316d12 100644 > --- a/hw/acpi/nvdimm.c > +++ b/hw/acpi/nvdimm.c > @@ -27,6 +27,7 @@ > */ > > #include "qemu/osdep.h" > +#include "qemu/uuid.h" > #include "hw/acpi/acpi.h" > #include "hw/acpi/aml-build.h" > #include "hw/acpi/bios-linker-loader.h" > @@ -34,18 +35,13 @@ > #include "hw/mem/nvdimm.h" > #include "qemu/nvdimm-utils.h" > > -#define NVDIMM_UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ > - { (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ > - (b) & 0xff, ((b) >> 8) & 0xff, (c) & 0xff, ((c) >> 8) & 0xff, \ > - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } > - > /* > * define Byte Addressable Persistent Memory (PM) Region according to > * ACPI 6.0: 5.2.25.1 System Physical Address Range Structure. > */ > static const uint8_t nvdimm_nfit_spa_uuid[] = > - NVDIMM_UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33, > - 0x18, 0xb7, 0x8c, 0xdb); > + UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33, > + 0x18, 0xb7, 0x8c, 0xdb); > > /* > * NVDIMM Firmware Interface Table > diff --git a/include/qemu/uuid.h b/include/qemu/uuid.h > index 129c45f..2d17a90 100644 > --- a/include/qemu/uuid.h > +++ b/include/qemu/uuid.h > @@ -34,6 +34,32 @@ typedef struct { > }; > } QemuUUID; > > +/** > + * @time_low: The low field of the timestamp > + * @time_mid: The middle field of the timestamp > + * @time_hi_and_version: The high field of the timestamp > + * multiplexed with the version number > + * @clock_seq_hi_and_reserved: The high field of the clock > + * sequence multiplexed with the variant > + * @clock_seq_low: The low field of the clock sequence > + * @node0: The spatially unique node0 identifier > + * @node1: The spatially unique node1 identifier > + * @node2: The spatially unique node2 identifier > + * @node3: The spatially unique node3 identifier > + * @node4: The spatially unique node4 identifier > + * @node5: The spatially unique node5 identifier > + * > + * This macro converts the fields of UUID to little-endian array > + */ > +#define UUID_LE(time_low, time_mid, time_hi_and_version, \ > + clock_seq_hi_and_reserved, clock_seq_low, node0, node1, node2, \ > + node3, node4, node5) \ > + { (time_low) & 0xff, ((time_low) >> 8) & 0xff, ((time_low) >> 16) & 0xff, \ > + ((time_low) >> 24) & 0xff, (time_mid) & 0xff, ((time_mid) >> 8) & 0xff, \ > + (time_hi_and_version) & 0xff, ((time_hi_and_version) >> 8) & 0xff, \ > + (clock_seq_hi_and_reserved), (clock_seq_low), (node0), (node1), (node2),\ > + (node3), (node4), (node5) } > + > #define UUID_FMT "%02hhx%02hhx%02hhx%02hhx-" \ > "%02hhx%02hhx-%02hhx%02hhx-" \ > "%02hhx%02hhx-" \ > diff --git a/slirp b/slirp > index 2faae0f..55ab21c 160000 > --- a/slirp > +++ b/slirp > @@ -1 +1 @@ > -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 > +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba The SLiRP submodule change is certainly unrelated.
On 2020/5/11 20:29, Philippe Mathieu-Daudé wrote: >> @@ -1 +1 @@ >> -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 >> +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba > > The SLiRP submodule change is certainly unrelated. Thanks Philippe's review and comments. I submitted another patchset "[PATCH RESEND v26 00/10] Add ARMv8 RAS virtualization support in QEMU" to fix it, please review that patchset.
>> + (node3), (node4), (node5) } >> + >> #define UUID_FMT "%02hhx%02hhx%02hhx%02hhx-" \ >> "%02hhx%02hhx-%02hhx%02hhx-" \ >> "%02hhx%02hhx-" \ >> diff --git a/slirp b/slirp >> index 2faae0f..55ab21c 160000 >> --- a/slirp >> +++ b/slirp >> @@ -1 +1 @@ >> -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 >> +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba > > The SLiRP submodule change is certainly unrelated. Thanks Philippe's review and comments. I submitted another patchset "[PATCH RESEND v26 00/10] Add ARMv8 RAS virtualization support in QEMU" to fix it, please review that patchset. > > > . >
On Mon, 11 May 2020 22:05:28 +0800 gengdongjiu <gengdongjiu@huawei.com> wrote: > >> + (node3), (node4), (node5) } > >> + > >> #define UUID_FMT "%02hhx%02hhx%02hhx%02hhx-" \ > >> "%02hhx%02hhx-%02hhx%02hhx-" \ > >> "%02hhx%02hhx-" \ > >> diff --git a/slirp b/slirp > >> index 2faae0f..55ab21c 160000 > >> --- a/slirp > >> +++ b/slirp > >> @@ -1 +1 @@ > >> -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 > >> +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba > > > > The SLiRP submodule change is certainly unrelated. > > Thanks Philippe's review and comments. I submitted another patchset "[PATCH RESEND v26 00/10] Add ARMv8 RAS virtualization support in QEMU" to fix it, please review that patchset. for future, adding RESEND doesn't make sence here. If you change patches then just bump version. > > > > > > > . > > >
On 2020/5/12 3:41, Igor Mammedov wrote:
> for future, adding RESEND doesn't make sence here. If you change patches then just bump version.
Igor,
Thanks for the reminder, Just now I submitted a new patchset version to avoid this confusion.
diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c index fa7bf8b..9316d12 100644 --- a/hw/acpi/nvdimm.c +++ b/hw/acpi/nvdimm.c @@ -27,6 +27,7 @@ */ #include "qemu/osdep.h" +#include "qemu/uuid.h" #include "hw/acpi/acpi.h" #include "hw/acpi/aml-build.h" #include "hw/acpi/bios-linker-loader.h" @@ -34,18 +35,13 @@ #include "hw/mem/nvdimm.h" #include "qemu/nvdimm-utils.h" -#define NVDIMM_UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ - { (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } - /* * define Byte Addressable Persistent Memory (PM) Region according to * ACPI 6.0: 5.2.25.1 System Physical Address Range Structure. */ static const uint8_t nvdimm_nfit_spa_uuid[] = - NVDIMM_UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33, - 0x18, 0xb7, 0x8c, 0xdb); + UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33, + 0x18, 0xb7, 0x8c, 0xdb); /* * NVDIMM Firmware Interface Table diff --git a/include/qemu/uuid.h b/include/qemu/uuid.h index 129c45f..2d17a90 100644 --- a/include/qemu/uuid.h +++ b/include/qemu/uuid.h @@ -34,6 +34,32 @@ typedef struct { }; } QemuUUID; +/** + * @time_low: The low field of the timestamp + * @time_mid: The middle field of the timestamp + * @time_hi_and_version: The high field of the timestamp + * multiplexed with the version number + * @clock_seq_hi_and_reserved: The high field of the clock + * sequence multiplexed with the variant + * @clock_seq_low: The low field of the clock sequence + * @node0: The spatially unique node0 identifier + * @node1: The spatially unique node1 identifier + * @node2: The spatially unique node2 identifier + * @node3: The spatially unique node3 identifier + * @node4: The spatially unique node4 identifier + * @node5: The spatially unique node5 identifier + * + * This macro converts the fields of UUID to little-endian array + */ +#define UUID_LE(time_low, time_mid, time_hi_and_version, \ + clock_seq_hi_and_reserved, clock_seq_low, node0, node1, node2, \ + node3, node4, node5) \ + { (time_low) & 0xff, ((time_low) >> 8) & 0xff, ((time_low) >> 16) & 0xff, \ + ((time_low) >> 24) & 0xff, (time_mid) & 0xff, ((time_mid) >> 8) & 0xff, \ + (time_hi_and_version) & 0xff, ((time_hi_and_version) >> 8) & 0xff, \ + (clock_seq_hi_and_reserved), (clock_seq_low), (node0), (node1), (node2),\ + (node3), (node4), (node5) } + #define UUID_FMT "%02hhx%02hhx%02hhx%02hhx-" \ "%02hhx%02hhx-%02hhx%02hhx-" \ "%02hhx%02hhx-" \ diff --git a/slirp b/slirp index 2faae0f..55ab21c 160000 --- a/slirp +++ b/slirp @@ -1 +1 @@ -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba