[v7,18/18] docs: add Orange Pi PC document

diff --git a/docs/system/orangepi.rst b/docs/system/orangepi.rst
new file mode 100644
index 0000000000..a76d52fb33
--- /dev/null
+++ b/docs/system/orangepi.rst
@@ -0,0 +1,253 @@ 
+Orange Pi PC Machine Type
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The Xunlong Orange Pi PC is an Allwinner H3 System on Chip
+based embedded computer with mainline support in both U-Boot
+and Linux. The board comes with a Quad Core Cortex-A7 @ 1.3GHz,
+1GiB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and
+various other I/O.
+
+Supported devices
+"""""""""""""""""
+
+The Orange Pi PC machine supports the following devices:
+
+ * SMP (Quad Core Cortex-A7)
+ * Generic Interrupt Controller configuration
+ * SRAM mappings
+ * SDRAM controller
+ * Real Time Clock
+ * Timer device (re-used from Allwinner A10)
+ * UART
+ * SD/MMC storage controller
+ * EMAC ethernet
+ * USB 2.0 interfaces
+ * Clock Control Unit
+ * System Control module
+ * Security Identifier device
+
+Limitations
+"""""""""""
+
+Currently, Orange Pi PC does *not* support the following features:
+
+- Graphical output via HDMI, GPU and/or the Display Engine
+- Audio output
+- Hardware Watchdog
+
+Also see the 'unimplemented' array in the Allwinner H3 SoC module
+for a complete list of unimplemented I/O devices: ``./hw/arm/allwinner-h3.c``
+
+Boot options
+""""""""""""
+
+The Orange Pi PC machine can start using the standard -kernel functionality
+for loading a Linux kernel or ELF executable. Additionally, the Orange Pi PC
+machine can also emulate the BootROM which is present on an actual Allwinner H3
+based SoC, which loads the bootloader from a SD card, specified via the -sd argument
+to qemu-system-arm.
+
+Machine-specific options
+""""""""""""""""""""""""
+
+The following machine-specific options are supported:
+
+- allwinner-rtc.base-year=YYYY
+
+  The Allwinner RTC device is automatically created by the Orange Pi PC machine
+  and uses a default base year value which can be overridden using the 'base-year' property.
+  The base year is the actual represented year when the RTC year value is zero.
+  This option can be used in case the target operating system driver uses a different
+  base year value. The minimum value for the base year is 1900.
+
+- allwinner-sid.identifier=abcd1122-a000-b000-c000-12345678ffff
+
+  The Security Identifier value can be read by the guest.
+  For example, U-Boot uses it to determine a unique MAC address.
+
+The above machine-specific options can be specified in qemu-system-arm
+via the '-global' argument, for example:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M orangepi-pc -sd mycard.img \
+       -global allwinner-rtc.base-year=2000
+
+Running mainline Linux
+""""""""""""""""""""""
+
+Mainline Linux kernels from 4.19 up to latest master are known to work.
+To build a Linux mainline kernel that can be booted by the Orange Pi PC machine,
+simply configure the kernel using the sunxi_defconfig configuration:
+
+.. code-block:: bash
+
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make mrproper
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make sunxi_defconfig
+
+To be able to use USB storage, you need to manually enable the corresponding
+configuration item. Start the kconfig configuration tool:
+
+.. code-block:: bash
+
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make menuconfig
+
+Navigate to the following item, enable it and save your configuration:
+
+  Device Drivers > USB support > USB Mass Storage support
+
+Build the Linux kernel with:
+
+.. code-block:: bash
+
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make
+
+To boot the newly build linux kernel in QEMU with the Orange Pi PC machine, use:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+      -kernel /path/to/linux/arch/arm/boot/zImage \
+      -append 'console=ttyS0,115200' \
+      -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb
+
+Orange Pi PC images
+"""""""""""""""""""
+
+Note that the mainline kernel does not have a root filesystem. You may provide it
+with an official Orange Pi PC image from the official website:
+
+  http://www.orangepi.org/downloadresources/
+
+Another possibility is to run an Armbian image for Orange Pi PC which
+can be downloaded from:
+
+   https://www.armbian.com/orange-pi-pc/
+
+Alternatively, you can also choose to build you own image with buildroot
+using the orangepi_pc_defconfig. Also see https://buildroot.org for more information.
+
+You can choose to attach the selected image either as an SD card or as USB mass storage.
+For example, to boot using the Orange Pi PC Debian image on SD card, simply add the -sd
+argument and provide the proper root= kernel parameter:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+      -kernel /path/to/linux/arch/arm/boot/zImage \
+      -append 'console=ttyS0,115200 root=/dev/mmcblk0p2' \
+      -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb \
+      -sd OrangePi_pc_debian_stretch_server_linux5.3.5_v1.0.img
+
+To attach the image as an USB mass storage device to the machine,
+simply append to the command:
+
+.. code-block:: bash
+
+  -drive if=none,id=stick,file=myimage.img \
+  -device usb-storage,bus=usb-bus.0,drive=stick
+
+Instead of providing a custom Linux kernel via the -kernel command you may also
+choose to let the Orange Pi PC machine load the bootloader from SD card, just like
+a real board would do using the BootROM. Simply pass the selected image via the -sd
+argument and remove the -kernel, -append, -dbt and -initrd arguments:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+       -sd Armbian_19.11.3_Orangepipc_buster_current_5.3.9.img
+
+Note that both the official Orange Pi PC images and Armbian images start
+a lot of userland programs via systemd. Depending on the host hardware and OS,
+they may be slow to emulate, especially due to emulating the 4 cores.
+To help reduce the performance slow down due to emulating the 4 cores, you can
+give the following kernel parameters via U-Boot (or via -append):
+
+.. code-block:: bash
+
+  => setenv extraargs 'systemd.default_timeout_start_sec=9000 loglevel=7 nosmp console=ttyS0,115200'
+
+Running U-Boot
+""""""""""""""
+
+U-Boot mainline can be build and configured using the orangepi_pc_defconfig
+using similar commands as describe above for Linux. Note that it is recommended
+for development/testing to select the following configuration setting in U-Boot:
+
+  Device Tree Control > Provider for DTB for DT Control > Embedded DTB
+
+To start U-Boot using the Orange Pi PC machine, provide the
+u-boot binary to the -kernel argument:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+      -kernel /path/to/uboot/u-boot -sd disk.img
+
+Use the following U-boot commands to load and boot a Linux kernel from SD card:
+
+.. code-block:: bash
+
+  => setenv bootargs console=ttyS0,115200
+  => ext2load mmc 0 0x42000000 zImage
+  => ext2load mmc 0 0x43000000 sun8i-h3-orangepi-pc.dtb
+  => bootz 0x42000000 - 0x43000000
+
+Running NetBSD
+""""""""""""""
+
+The NetBSD operating system also includes support for Allwinner H3 based boards,
+including the Orange Pi PC. NetBSD 9.0 is known to work best for the Orange Pi PC
+board and provides a fully working system with serial console, networking and storage.
+For the Orange Pi PC machine, get the 'evbarm-earmv7hf' based image from:
+
+  https://cdn.netbsd.org/pub/NetBSD/NetBSD-9.0/evbarm-earmv7hf/binary/gzimg/armv7.img.gz
+
+The image requires manually installing U-Boot in the image. Build U-Boot with
+the orangepi_pc_defconfig configuration as described in the previous section.
+Next, unzip the NetBSD image and write the U-Boot binary including SPL using:
+
+.. code-block:: bash
+
+  $ gunzip armv7.img.gz
+  $ dd if=/path/to/u-boot-sunxi-with-spl.bin of=armv7.img bs=1024 seek=8 conv=notrunc
+
+Finally, before starting the machine the SD image must be extended such
+that the NetBSD kernel will not conclude the NetBSD partition is larger than
+the emulated SD card:
+
+.. code-block:: bash
+
+  $ dd if=/dev/zero bs=1M count=64 >> armv7.img
+
+Start the machine using the following command:
+
+.. code-block:: bash
+
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+        -sd armv7.img -global allwinner-rtc.base-year=2000
+
+At the U-Boot stage, interrupt the automatic boot process by pressing a key
+and set the following environment variables before booting:
+
+.. code-block:: bash
+
+  => setenv bootargs root=ld0a
+  => setenv kernel netbsd-GENERIC.ub
+  => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb
+  => setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel}; fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}; fdt addr ${fdt_addr_r}; bootm ${kernel_addr_r} - ${fdt_addr_r}'
+
+Optionally you may save the environment variables to SD card with 'saveenv'.
+To continue booting simply give the 'boot' command and NetBSD boots.
+
+Orange Pi PC acceptance tests
+"""""""""""""""""""""""""""""
+
+The Orange Pi PC machine has several acceptance tests included.
+To run the whole set of tests, build QEMU from source and simply
+provide the following command:
+
+.. code-block:: bash
+
+  $ AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run \
+     -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index d2a3b44ce8..f16465aa48 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -215,3 +215,5 @@  emulation includes the following elements:
 
 A Linux 2.6 test image is available on the QEMU web site. More
 information is available in the QEMU mailing-list archive.
+
+.. include:: orangepi.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 53040ceab3..10802f7e66 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -498,6 +498,7 @@  S: Maintained
 F: hw/*/allwinner-h3*
 F: include/hw/*/allwinner-h3*
 F: hw/arm/orangepi.c
+F: docs/system/orangepi.rst
 
 ARM PrimeCell and CMSDK devices
 M: Peter Maydell <peter.maydell@linaro.org>