diff mbox series

[v7,9/9] qdev-monitor: print the device's clock with info qtree

Message ID 20200224170301.246623-10-damien.hedde@greensocs.com
State New
Headers show
Series Clock framework API | expand

Commit Message

Damien Hedde Feb. 24, 2020, 5:03 p.m. UTC 
This prints the clocks attached to a DeviceState when using
"info qtree" monitor command. For every clock, it displays the
direction, the name and if the clock is forwarded. For input clock,
it displays also the frequency.

This is based on the original work of Frederic Konrad.

Here follows a sample of `info qtree` output on xilinx_zynq machine
after linux boot with only one uart clocked:
> bus: main-system-bus
>  type System
>  [...]
>  dev: cadence_uart, id ""
>    gpio-out "sysbus-irq" 1
>    clock-in "refclk" freq_hz=0.000000e+00
>    chardev = ""
>    mmio 00000000e0001000/0000000000001000
>  dev: cadence_uart, id ""
>    gpio-out "sysbus-irq" 1
>    clock-in "refclk" freq_hz=1.375661e+07
>    chardev = "serial0"
>    mmio 00000000e0000000/0000000000001000
>  [...]
>  dev: xilinx,zynq_slcr, id ""
>    clock-out "uart1_ref_clk" freq_hz=0.000000e+00
>    clock-out "uart0_ref_clk" freq_hz=1.375661e+07
>    clock-in "ps_clk" freq_hz=3.333333e+07
>    mmio 00000000f8000000/0000000000001000

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---

v7:
 + print output clocks frequencies too
 + add sample of qtree message above
 + display frequencies in floating-point
---
 qdev-monitor.c | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/qdev-monitor.c b/qdev-monitor.c
index 8ce71a206b..1d84b4e416 100644
--- a/qdev-monitor.c
+++ b/qdev-monitor.c
@@ -38,6 +38,7 @@ 
 #include "migration/misc.h"
 #include "migration/migration.h"
 #include "qemu/cutils.h"
+#include "hw/clock.h"
 
 /*
  * Aliases were a bad idea from the start.  Let's keep them
@@ -736,6 +737,7 @@  static void qdev_print(Monitor *mon, DeviceState *dev, int indent)
     ObjectClass *class;
     BusState *child;
     NamedGPIOList *ngl;
+    NamedClockList *ncl;
 
     qdev_printf("dev: %s, id \"%s\"\n", object_get_typename(OBJECT(dev)),
                 dev->id ? dev->id : "");
@@ -750,6 +752,13 @@  static void qdev_print(Monitor *mon, DeviceState *dev, int indent)
                         ngl->num_out);
         }
     }
+    QLIST_FOREACH(ncl, &dev->clocks, node) {
+        qdev_printf("clock-%s%s \"%s\" freq_hz=%e\n",
+                    ncl->output ? "out" : "in",
+                    ncl->alias ? " (alias)" : "",
+                    ncl->name,
+                    CLOCK_PERIOD_TO_HZ(1.0 * clock_get(ncl->clock)));
+    }
     class = object_get_class(OBJECT(dev));
     do {
         qdev_print_props(mon, dev, DEVICE_CLASS(class)->props_, indent);