@@ -383,8 +383,7 @@ dummy := $(call unnest-vars,, \
ui-obj-m \
audio-obj-y \
audio-obj-m \
- trace-obj-y \
- slirp-obj-y)
+ trace-obj-y)
include $(SRC_PATH)/tests/Makefile.include
@@ -458,7 +457,10 @@ CAP_CFLAGS += -DCAPSTONE_HAS_X86
subdir-capstone: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
-$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) $(chardev-obj-y) $(slirp-obj-y) \
+subdir-slirp: .git-submodule-status
+ $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp BUILD_DIR="$(BUILD_DIR)/slirp" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(QEMU_CFLAGS)")
+
+$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) $(chardev-obj-y) \
$(qom-obj-y) $(crypto-aes-obj-$(CONFIG_USER_ONLY))
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
@@ -4,7 +4,6 @@ stub-obj-y = stubs/ util/ crypto/
util-obj-y = util/ qobject/ qapi/
chardev-obj-y = chardev/
-slirp-obj-$(CONFIG_SLIRP) = slirp/
#######################################################################
# authz-obj-y is code used by both qemu system emulation and qemu-img
@@ -174,7 +174,6 @@ target-obj-y :=
block-obj-y :=
common-obj-y :=
chardev-obj-y :=
-slirp-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
@@ -188,8 +187,7 @@ dummy := $(call unnest-vars,.., \
qom-obj-y \
io-obj-y \
common-obj-y \
- common-obj-m \
- slirp-obj-y)
+ common-obj-m)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
@@ -199,7 +197,6 @@ all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(slirp-obj-y)
$(QEMU_PROG_BUILD): config-devices.mak
@@ -406,7 +406,7 @@ includedir="\${prefix}/include"
sysconfdir="\${prefix}/etc"
local_statedir="\${prefix}/var"
confsuffix="/qemu"
-slirp="yes"
+slirp=""
oss_lib=""
bsd="no"
linux="no"
@@ -1105,6 +1105,10 @@ for opt do
;;
--disable-slirp) slirp="no"
;;
+ --enable-slirp=git) slirp="git"
+ ;;
+ --enable-slirp=system) slirp="system"
+ ;;
--disable-vde) vde="no"
;;
--enable-vde) vde="yes"
@@ -5754,6 +5758,55 @@ if test "$libpmem" != "no"; then
fi
fi
+##########################################
+# check for slirp
+
+case "$slirp" in
+ "" | yes)
+ if $pkg_config slirp; then
+ slirp=system
+ elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
+ slirp=git
+ elif test -e "${source_path}/slirp/Makefile" ; then
+ slirp=internal
+ elif test -z "$slirp" ; then
+ slirp=no
+ else
+ feature_not_found "slirp" "Install slirp devel or git submodule"
+ fi
+ ;;
+
+ system)
+ if ! $pkg_config slirp; then
+ feature_not_found "slirp" "Install slirp devel"
+ fi
+ ;;
+esac
+
+case "$slirp" in
+ git | internal)
+ if test "$slirp" = git; then
+ git_submodules="${git_submodules} slirp"
+ fi
+ mkdir -p slirp
+ slirp_cflags="-I\$(SRC_PATH)/slirp/src -I\$(BUILD_DIR)/slirp/src"
+ slirp_libs="-L\$(BUILD_DIR)/slirp -lslirp"
+ ;;
+
+ system)
+ slirp_version=$($pkg_config --modversion slirp 2>/dev/null)
+ slirp_cflags=$($pkg_config --cflags slirp 2>/dev/null)
+ slirp_libs=$($pkg_config --libs slirp 2>/dev/null)
+ ;;
+
+ no)
+ ;;
+ *)
+ error_exit "Unknown state for slirp: $slirp"
+ ;;
+esac
+
+
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
@@ -6111,7 +6164,8 @@ echo "QEMU_LDFLAGS $QEMU_LDFLAGS"
echo "make $make"
echo "install $install"
echo "python $python ($python_version)"
-if test "$slirp" = "yes" ; then
+echo "slirp support $slirp $(echo_version $slirp $slirp_version)"
+if test "$slirp" != "no" ; then
echo "smbd $smbd"
fi
echo "module support $modules"
@@ -6372,9 +6426,14 @@ fi
if test "$profiler" = "yes" ; then
echo "CONFIG_PROFILER=y" >> $config_host_mak
fi
-if test "$slirp" = "yes" ; then
+if test "$slirp" != "no"; then
echo "CONFIG_SLIRP=y" >> $config_host_mak
echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
+ echo "SLIRP_CFLAGS=$slirp_cflags" >> $config_host_mak
+ echo "SLIRP_LIBS=$slirp_libs" >> $config_host_mak
+fi
+if [ "$slirp" = "git" -o "$slirp" = "internal" ]; then
+ echo "config-host.h: subdir-slirp" >> $config_host_mak
fi
if test "$vde" = "yes" ; then
echo "CONFIG_VDE=y" >> $config_host_mak
@@ -8,6 +8,8 @@ common-obj-$(call land,$(CONFIG_VIRTIO_NET),$(CONFIG_VHOST_NET_USER)) += vhost-u
common-obj-$(call land,$(call lnot,$(CONFIG_VIRTIO_NET)),$(CONFIG_VHOST_NET_USER)) += vhost-user-stub.o
common-obj-$(CONFIG_ALL) += vhost-user-stub.o
common-obj-$(CONFIG_SLIRP) += slirp.o
+slirp.o-cflags := $(SLIRP_CFLAGS)
+slirp.o-libs := $(SLIRP_LIBS)
common-obj-$(CONFIG_VDE) += vde.o
common-obj-$(CONFIG_NETMAP) += netmap.o
common-obj-y += filter.o
@@ -37,7 +37,7 @@
#include "monitor/monitor.h"
#include "qemu/error-report.h"
#include "qemu/sockets.h"
-#include "slirp/src/libslirp.h"
+#include <libslirp.h>
#include "chardev/char-fe.h"
#include "sysemu/sysemu.h"
#include "qemu/cutils.h"
@@ -3,6 +3,7 @@ util-obj-y += bufferiszero.o
util-obj-y += lockcnt.o
util-obj-y += aiocb.o async.o aio-wait.o thread-pool.o qemu-timer.o
util-obj-y += main-loop.o iohandler.o
+main-loop.o-cflags := $(SLIRP_CFLAGS)
util-obj-$(call lnot,$(CONFIG_ATOMIC64)) += atomic64.o
util-obj-$(CONFIG_POSIX) += aio-posix.o
util-obj-$(CONFIG_POSIX) += compatfd.o