[v9,5/6] s390x/vfio: ap: Introduce VFIO AP device

Introduces a VFIO based AP device. The device is defined via
the QEMU command line by specifying:

    -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device>

There may be only one vfio-ap device configured for a guest.

The mediated matrix device is created by the VFIO AP device
driver by writing a UUID to a sysfs attribute file (see
docs/vfio-ap.txt). The mediated matrix device will be named
after the UUID. Symbolic links to the $uuid are created in
many places, so the path to the mediated matrix device $uuid
can be specified in any of the following ways:

/sys/devices/vfio_ap/matrix/$uuid
/sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
/sys/bus/mdev/devices/$uuid
/sys/bus/mdev/drivers/vfio_mdev/$uuid

When the vfio-ap device is realized, it acquires and opens the
VFIO iommu group to which the mediated matrix device is
bound. This causes a VFIO group notification event to be
signaled. The vfio_ap device driver's group notification
handler will get called at which time the device driver
will configure the the AP devices to which the guest will
be granted access.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
---
 MAINTAINERS                       |   1 +
 default-configs/s390x-softmmu.mak |   1 +
 hw/vfio/Makefile.objs             |   1 +
 hw/vfio/ap.c                      | 181 ++++++++++++++++++++++++++++++
 include/hw/vfio/vfio-common.h     |   1 +
 5 files changed, 185 insertions(+)
 create mode 100644 hw/vfio/ap.c

> +static void vfio_ap_realize(DeviceState *dev, Error **errp)
> +{
> +    int ret;
> +    char *mdevid;
> +    Error *local_err = NULL;
> +    VFIOGroup *vfio_group;
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vfio_group = vfio_ap_get_group(vapdev, &local_err);
> +    if (!vfio_group) {
> +        goto out_err;
> +    }
> +
> +    vapdev->vdev.ops = &vfio_ap_ops;
> +    vapdev->vdev.type = VFIO_DEVICE_TYPE_AP;
> +    mdevid = basename(vapdev->vdev.sysfsdev);
> +    vapdev->vdev.name = g_strdup_printf("%s", mdevid);
> +    vapdev->vdev.dev = dev;
> +
> +    ret = vfio_get_device(vfio_group, mdevid, &vapdev->vdev, &local_err);
> +    if (ret) {
> +        goto out_get_dev_err;
> +    }
> +
> +    /* Enable hardware to intepret AP instructions executed on the guest */
> +    object_property_set_bool(OBJECT(qdev_get_machine()), true, "apie", NULL);


Is that a leftover? I don't remember seeing that property in the
previous patches and by the time we reach this point, APIE should
already be enabled :)

I assume this statement reports an error that you simply ignore.

On 2018-09-27 00:54, Tony Krowiak wrote:
> Introduces a VFIO based AP device. The device is defined via
> the QEMU command line by specifying:
> 
>     -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device>
> 
> There may be only one vfio-ap device configured for a guest.
> 
> The mediated matrix device is created by the VFIO AP device
> driver by writing a UUID to a sysfs attribute file (see
> docs/vfio-ap.txt). The mediated matrix device will be named
> after the UUID. Symbolic links to the $uuid are created in
> many places, so the path to the mediated matrix device $uuid
> can be specified in any of the following ways:
> 
> /sys/devices/vfio_ap/matrix/$uuid
> /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
> /sys/bus/mdev/devices/$uuid
> /sys/bus/mdev/drivers/vfio_mdev/$uuid
> 
> When the vfio-ap device is realized, it acquires and opens the
> VFIO iommu group to which the mediated matrix device is
> bound. This causes a VFIO group notification event to be
> signaled. The vfio_ap device driver's group notification
> handler will get called at which time the device driver
> will configure the the AP devices to which the guest will
> be granted access.
> 
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> ---
[...]
> diff --git a/hw/vfio/ap.c b/hw/vfio/ap.c
> new file mode 100644
> index 000000000000..429988f23f98
> --- /dev/null
> +++ b/hw/vfio/ap.c
> @@ -0,0 +1,181 @@
> +/*
> + * VFIO based AP matrix device assignment
> + *
> + * Copyright 2018 IBM Corp.
> + * Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
> + *            Halil Pasic <pasic@linux.ibm.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or (at
> + * your option) any later version. See the COPYING file in the top-level
> + * directory.
> + */
> +
> +#include <linux/vfio.h>
> +#include <sys/ioctl.h>
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/sysbus.h"
> +#include "hw/vfio/vfio.h"
> +#include "hw/vfio/vfio-common.h"
> +#include "hw/s390x/ap-device.h"
> +#include "qemu/error-report.h"
> +#include "qemu/queue.h"
> +#include "qemu/option.h"
> +#include "qemu/config-file.h"
> +#include "cpu.h"
> +#include "kvm_s390x.h"
> +#include "sysemu/sysemu.h"
> +#include "hw/s390x/ap-bridge.h"
> +#include "exec/address-spaces.h"
> +
> +#define VFIO_AP_DEVICE_TYPE      "vfio-ap"
> +
> +typedef struct VFIOAPDevice {
> +    APDevice apdev;
> +    VFIODevice vdev;
> +} VFIOAPDevice;
> +
> +static void vfio_ap_compute_needs_reset(VFIODevice *vdev)
> +{
> +    vdev->needs_reset = false;
> +}
> +
> +/*
> + * We don't need vfio_hot_reset_multi and vfio_eoi operations for
> + * vfio-ap device now.
> + */
> +struct VFIODeviceOps vfio_ap_ops = {
> +    .vfio_compute_needs_reset = vfio_ap_compute_needs_reset,
> +};
> +
> +static void vfio_ap_put_device(VFIOAPDevice *vapdev)
> +{
> +    g_free(vapdev->vdev.name);
> +    vfio_put_base_device(&vapdev->vdev);
> +}
> +
> +static VFIOGroup *vfio_ap_get_group(VFIOAPDevice *vapdev, Error **errp)
> +{
> +    char *tmp, group_path[PATH_MAX];
> +    ssize_t len;
> +    int groupid;
> +
> +    tmp = g_strdup_printf("%s/iommu_group", vapdev->vdev.sysfsdev);
> +    len = readlink(tmp, group_path, sizeof(group_path));
> +    g_free(tmp);
> +
> +    if (len <= 0 || len >= sizeof(group_path)) {
> +        error_setg(errp, "%s: no iommu_group found for %s",
> +                   VFIO_AP_DEVICE_TYPE, vapdev->vdev.sysfsdev);
> +        return NULL;
> +    }
> +
> +    group_path[len] = 0;

You could maybe use g_file_read_link() instead to avoid the ugliness
that is needed around readlink().

> +    if (sscanf(basename(group_path), "%d", &groupid) != 1) {
> +        error_setg(errp, "vfio: failed to read %s", group_path);
> +        return NULL;
> +    }
> +
> +    return vfio_get_group(groupid, &address_space_memory, errp);
> +}
> +
> +static void vfio_ap_realize(DeviceState *dev, Error **errp)
> +{
> +    int ret;
> +    char *mdevid;
> +    Error *local_err = NULL;
> +    VFIOGroup *vfio_group;
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);

IIRC DO_UPCAST should be avoided in new code. So this is now here the
right place to finally use the AP_DEVICE() macro?

> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);

Double assignment to vapdev.

> +    vfio_group = vfio_ap_get_group(vapdev, &local_err);
> +    if (!vfio_group) {
> +        goto out_err;
> +    }
> +
> +    vapdev->vdev.ops = &vfio_ap_ops;
> +    vapdev->vdev.type = VFIO_DEVICE_TYPE_AP;
> +    mdevid = basename(vapdev->vdev.sysfsdev);
> +    vapdev->vdev.name = g_strdup_printf("%s", mdevid);

g_strdup instead of g_strdup_printf should be sufficient here, shouldn't it?

> +    vapdev->vdev.dev = dev;
> +
> +    ret = vfio_get_device(vfio_group, mdevid, &vapdev->vdev, &local_err);
> +    if (ret) {
> +        goto out_get_dev_err;
> +    }
> +
> +    /* Enable hardware to intepret AP instructions executed on the guest */
> +    object_property_set_bool(OBJECT(qdev_get_machine()), true, "apie", NULL);
> +
> +    return;
> +
> +out_get_dev_err:
> +    vfio_ap_put_device(vapdev);
> +    vfio_put_group(vfio_group);
> +out_err:
> +    error_propagate(errp, local_err);
> +}

 Thomas

On 09/27/2018 09:56 AM, Thomas Huth wrote:
> On 2018-09-27 00:54, Tony Krowiak wrote:
>> Introduces a VFIO based AP device. The device is defined via
>> the QEMU command line by specifying:
>>
>>      -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device>
>>
>> There may be only one vfio-ap device configured for a guest.
>>
>> The mediated matrix device is created by the VFIO AP device
>> driver by writing a UUID to a sysfs attribute file (see
>> docs/vfio-ap.txt). The mediated matrix device will be named
>> after the UUID. Symbolic links to the $uuid are created in
>> many places, so the path to the mediated matrix device $uuid
>> can be specified in any of the following ways:
>>
>> /sys/devices/vfio_ap/matrix/$uuid
>> /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
>> /sys/bus/mdev/devices/$uuid
>> /sys/bus/mdev/drivers/vfio_mdev/$uuid
>>
>> When the vfio-ap device is realized, it acquires and opens the
>> VFIO iommu group to which the mediated matrix device is
>> bound. This causes a VFIO group notification event to be
>> signaled. The vfio_ap device driver's group notification
>> handler will get called at which time the device driver
>> will configure the the AP devices to which the guest will
>> be granted access.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>> ---
> [...]
>> diff --git a/hw/vfio/ap.c b/hw/vfio/ap.c
>> new file mode 100644
>> index 000000000000..429988f23f98
>> --- /dev/null
>> +++ b/hw/vfio/ap.c
>> @@ -0,0 +1,181 @@
>> +/*
>> + * VFIO based AP matrix device assignment
>> + *
>> + * Copyright 2018 IBM Corp.
>> + * Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
>> + *            Halil Pasic <pasic@linux.ibm.com>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or (at
>> + * your option) any later version. See the COPYING file in the top-level
>> + * directory.
>> + */
>> +
>> +#include <linux/vfio.h>
>> +#include <sys/ioctl.h>
>> +#include "qemu/osdep.h"
>> +#include "qapi/error.h"
>> +#include "hw/sysbus.h"
>> +#include "hw/vfio/vfio.h"
>> +#include "hw/vfio/vfio-common.h"
>> +#include "hw/s390x/ap-device.h"
>> +#include "qemu/error-report.h"
>> +#include "qemu/queue.h"
>> +#include "qemu/option.h"
>> +#include "qemu/config-file.h"
>> +#include "cpu.h"
>> +#include "kvm_s390x.h"
>> +#include "sysemu/sysemu.h"
>> +#include "hw/s390x/ap-bridge.h"
>> +#include "exec/address-spaces.h"
>> +
>> +#define VFIO_AP_DEVICE_TYPE      "vfio-ap"
>> +
>> +typedef struct VFIOAPDevice {
>> +    APDevice apdev;
>> +    VFIODevice vdev;
>> +} VFIOAPDevice;
>> +
>> +static void vfio_ap_compute_needs_reset(VFIODevice *vdev)
>> +{
>> +    vdev->needs_reset = false;
>> +}
>> +
>> +/*
>> + * We don't need vfio_hot_reset_multi and vfio_eoi operations for
>> + * vfio-ap device now.
>> + */
>> +struct VFIODeviceOps vfio_ap_ops = {
>> +    .vfio_compute_needs_reset = vfio_ap_compute_needs_reset,
>> +};
>> +
>> +static void vfio_ap_put_device(VFIOAPDevice *vapdev)
>> +{
>> +    g_free(vapdev->vdev.name);
>> +    vfio_put_base_device(&vapdev->vdev);
>> +}
>> +
>> +static VFIOGroup *vfio_ap_get_group(VFIOAPDevice *vapdev, Error **errp)
>> +{
>> +    char *tmp, group_path[PATH_MAX];
>> +    ssize_t len;
>> +    int groupid;
>> +
>> +    tmp = g_strdup_printf("%s/iommu_group", vapdev->vdev.sysfsdev);
>> +    len = readlink(tmp, group_path, sizeof(group_path));
>> +    g_free(tmp);
>> +
>> +    if (len <= 0 || len >= sizeof(group_path)) {
>> +        error_setg(errp, "%s: no iommu_group found for %s",
>> +                   VFIO_AP_DEVICE_TYPE, vapdev->vdev.sysfsdev);
>> +        return NULL;
>> +    }
>> +
>> +    group_path[len] = 0;
> 
> You could maybe use g_file_read_link() instead to avoid the ugliness
> that is needed around readlink().

I will make that change.

> 
>> +    if (sscanf(basename(group_path), "%d", &groupid) != 1) {
>> +        error_setg(errp, "vfio: failed to read %s", group_path);
>> +        return NULL;
>> +    }
>> +
>> +    return vfio_get_group(groupid, &address_space_memory, errp);
>> +}
>> +
>> +static void vfio_ap_realize(DeviceState *dev, Error **errp)
>> +{
>> +    int ret;
>> +    char *mdevid;
>> +    Error *local_err = NULL;
>> +    VFIOGroup *vfio_group;
>> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> 
> IIRC DO_UPCAST should be avoided in new code. So this is now here the
> right place to finally use the AP_DEVICE() macro?

Will do.

> 
>> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
>> +
>> +    vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> 
> Double assignment to vapdev.

Ah, yes ... it needs to go

> 
>> +    vfio_group = vfio_ap_get_group(vapdev, &local_err);
>> +    if (!vfio_group) {
>> +        goto out_err;
>> +    }
>> +
>> +    vapdev->vdev.ops = &vfio_ap_ops;
>> +    vapdev->vdev.type = VFIO_DEVICE_TYPE_AP;
>> +    mdevid = basename(vapdev->vdev.sysfsdev);
>> +    vapdev->vdev.name = g_strdup_printf("%s", mdevid);
> 
> g_strdup instead of g_strdup_printf should be sufficient here, shouldn't it?

Yes, it is sufficient, I'll change it.

> 
>> +    vapdev->vdev.dev = dev;
>> +
>> +    ret = vfio_get_device(vfio_group, mdevid, &vapdev->vdev, &local_err);
>> +    if (ret) {
>> +        goto out_get_dev_err;
>> +    }
>> +
>> +    /* Enable hardware to intepret AP instructions executed on the guest */
>> +    object_property_set_bool(OBJECT(qdev_get_machine()), true, "apie", NULL);
>> +
>> +    return;
>> +
>> +out_get_dev_err:
>> +    vfio_ap_put_device(vapdev);
>> +    vfio_put_group(vfio_group);
>> +out_err:
>> +    error_propagate(errp, local_err);
>> +}
> 
>   Thomas
>

On 27/09/2018 00:54, Tony Krowiak wrote:
> Introduces a VFIO based AP device. The device is defined via
> the QEMU command line by specifying:
> 
>      -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device>
> 
> There may be only one vfio-ap device configured for a guest.
> 
> The mediated matrix device is created by the VFIO AP device
> driver by writing a UUID to a sysfs attribute file (see
> docs/vfio-ap.txt). The mediated matrix device will be named
> after the UUID. Symbolic links to the $uuid are created in
> many places, so the path to the mediated matrix device $uuid
> can be specified in any of the following ways:
> 
> /sys/devices/vfio_ap/matrix/$uuid
> /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
> /sys/bus/mdev/devices/$uuid
> /sys/bus/mdev/drivers/vfio_mdev/$uuid
> 
> When the vfio-ap device is realized, it acquires and opens the
> VFIO iommu group to which the mediated matrix device is
> bound. This causes a VFIO group notification event to be
> signaled. The vfio_ap device driver's group notification
> handler will get called at which time the device driver
> will configure the the AP devices to which the guest will
> be granted access.
> 
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> ---
>   MAINTAINERS                       |   1 +
>   default-configs/s390x-softmmu.mak |   1 +
>   hw/vfio/Makefile.objs             |   1 +
>   hw/vfio/ap.c                      | 181 ++++++++++++++++++++++++++++++
>   include/hw/vfio/vfio-common.h     |   1 +
>   5 files changed, 185 insertions(+)
>   create mode 100644 hw/vfio/ap.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 97e8ed808bc0..29041da69237 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1209,6 +1209,7 @@ F: hw/s390x/ap-device.c
>   F: hw/s390x/ap-bridge.c
>   F: include/hw/s390x/ap-device.h
>   F: include/hw/s390x/ap-bridge.h
> +F: hw/vfio/ap.c
>   L: qemu-s390x@nongnu.org
> 
>   vhost
> diff --git a/default-configs/s390x-softmmu.mak b/default-configs/s390x-softmmu.mak
> index d6b67d50f0e4..5eef37592451 100644
> --- a/default-configs/s390x-softmmu.mak
> +++ b/default-configs/s390x-softmmu.mak
> @@ -7,3 +7,4 @@ CONFIG_S390_FLIC=y
>   CONFIG_S390_FLIC_KVM=$(CONFIG_KVM)
>   CONFIG_VFIO_CCW=$(CONFIG_LINUX)
>   CONFIG_WDT_DIAG288=y
> +CONFIG_VFIO_AP=$(CONFIG_LINUX)
> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
> index a2e7a0a7cf02..8b3f664d85f7 100644
> --- a/hw/vfio/Makefile.objs
> +++ b/hw/vfio/Makefile.objs
> @@ -6,4 +6,5 @@ obj-$(CONFIG_SOFTMMU) += platform.o
>   obj-$(CONFIG_VFIO_XGMAC) += calxeda-xgmac.o
>   obj-$(CONFIG_VFIO_AMD_XGBE) += amd-xgbe.o
>   obj-$(CONFIG_SOFTMMU) += spapr.o
> +obj-$(CONFIG_VFIO_AP) += ap.o
>   endif
> diff --git a/hw/vfio/ap.c b/hw/vfio/ap.c
> new file mode 100644
> index 000000000000..429988f23f98
> --- /dev/null
> +++ b/hw/vfio/ap.c
> @@ -0,0 +1,181 @@
> +/*
> + * VFIO based AP matrix device assignment
> + *
> + * Copyright 2018 IBM Corp.
> + * Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
> + *            Halil Pasic <pasic@linux.ibm.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or (at
> + * your option) any later version. See the COPYING file in the top-level
> + * directory.
> + */
> +
> +#include <linux/vfio.h>
> +#include <sys/ioctl.h>
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/sysbus.h"
> +#include "hw/vfio/vfio.h"
> +#include "hw/vfio/vfio-common.h"
> +#include "hw/s390x/ap-device.h"
> +#include "qemu/error-report.h"
> +#include "qemu/queue.h"
> +#include "qemu/option.h"
> +#include "qemu/config-file.h"
> +#include "cpu.h"
> +#include "kvm_s390x.h"
> +#include "sysemu/sysemu.h"
> +#include "hw/s390x/ap-bridge.h"
> +#include "exec/address-spaces.h"
> +
> +#define VFIO_AP_DEVICE_TYPE      "vfio-ap"
> +
> +typedef struct VFIOAPDevice {
> +    APDevice apdev;
> +    VFIODevice vdev;
> +} VFIOAPDevice;
> +
> +static void vfio_ap_compute_needs_reset(VFIODevice *vdev)
> +{
> +    vdev->needs_reset = false;
> +}
> +
> +/*
> + * We don't need vfio_hot_reset_multi and vfio_eoi operations for
> + * vfio-ap device now.
> + */
> +struct VFIODeviceOps vfio_ap_ops = {
> +    .vfio_compute_needs_reset = vfio_ap_compute_needs_reset,
> +};
> +
> +static void vfio_ap_put_device(VFIOAPDevice *vapdev)
> +{
> +    g_free(vapdev->vdev.name);
> +    vfio_put_base_device(&vapdev->vdev);
> +}
> +
> +static VFIOGroup *vfio_ap_get_group(VFIOAPDevice *vapdev, Error **errp)
> +{
> +    char *tmp, group_path[PATH_MAX];
> +    ssize_t len;
> +    int groupid;
> +
> +    tmp = g_strdup_printf("%s/iommu_group", vapdev->vdev.sysfsdev);
> +    len = readlink(tmp, group_path, sizeof(group_path));
> +    g_free(tmp);
> +
> +    if (len <= 0 || len >= sizeof(group_path)) {
> +        error_setg(errp, "%s: no iommu_group found for %s",
> +                   VFIO_AP_DEVICE_TYPE, vapdev->vdev.sysfsdev);
> +        return NULL;
> +    }
> +
> +    group_path[len] = 0;
> +
> +    if (sscanf(basename(group_path), "%d", &groupid) != 1) {
> +        error_setg(errp, "vfio: failed to read %s", group_path);
> +        return NULL;
> +    }
> +
> +    return vfio_get_group(groupid, &address_space_memory, errp);
> +}
> +
> +static void vfio_ap_realize(DeviceState *dev, Error **errp)
> +{
> +    int ret;
> +    char *mdevid;
> +    Error *local_err = NULL;
> +    VFIOGroup *vfio_group;
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vfio_group = vfio_ap_get_group(vapdev, &local_err);
> +    if (!vfio_group) {
> +        goto out_err;
> +    }
> +
> +    vapdev->vdev.ops = &vfio_ap_ops;
> +    vapdev->vdev.type = VFIO_DEVICE_TYPE_AP;
> +    mdevid = basename(vapdev->vdev.sysfsdev);
> +    vapdev->vdev.name = g_strdup_printf("%s", mdevid);
> +    vapdev->vdev.dev = dev;
> +
> +    ret = vfio_get_device(vfio_group, mdevid, &vapdev->vdev, &local_err);
> +    if (ret) {
> +        goto out_get_dev_err;
> +    }
> +
> +    /* Enable hardware to intepret AP instructions executed on the guest */
> +    object_property_set_bool(OBJECT(qdev_get_machine()), true, "apie", NULL);
> +
> +    return;
> +
> +out_get_dev_err:
> +    vfio_ap_put_device(vapdev);
> +    vfio_put_group(vfio_group);
> +out_err:
> +    error_propagate(errp, local_err);
> +}
> +
> +static void vfio_ap_unrealize(DeviceState *dev, Error **errp)
> +{
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +    VFIOGroup *group = vapdev->vdev.group;
> +
> +    vfio_ap_put_device(vapdev);
> +    vfio_put_group(group);
> +}
> +
> +static Property vfio_ap_properties[] = {
> +    DEFINE_PROP_STRING("sysfsdev", VFIOAPDevice, vdev.sysfsdev),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void vfio_ap_reset(DeviceState *dev)
> +{
> +    int ret;
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    ret = ioctl(vapdev->vdev.fd, VFIO_DEVICE_RESET);
> +    if (ret) {
> +        error_report("%s: failed to reset %s device: %s", __func__,
> +                     vapdev->vdev.name, strerror(ret));
> +    }
> +}
> +
> +static const VMStateDescription vfio_ap_vmstate = {
> +    .name = VFIO_AP_DEVICE_TYPE,
> +    .unmigratable = 1,
> +};
> +
> +static void vfio_ap_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->props = vfio_ap_properties;
> +    dc->vmsd = &vfio_ap_vmstate;
> +    dc->desc = "VFIO-based AP device assignment";
> +    dc->realize = vfio_ap_realize;
> +    dc->unrealize = vfio_ap_unrealize;
> +    dc->hotpluggable = false;
> +    dc->reset = vfio_ap_reset;
> +    dc->bus_type = TYPE_AP_BUS;
> +}
> +
> +static const TypeInfo vfio_ap_info = {
> +    .name = VFIO_AP_DEVICE_TYPE,
> +    .parent = AP_DEVICE_TYPE,
> +    .instance_size = sizeof(VFIOAPDevice),
> +    .class_init = vfio_ap_class_init,
> +};
> +
> +static void vfio_ap_type_init(void)
> +{
> +    type_register_static(&vfio_ap_info);
> +}
> +
> +type_init(vfio_ap_type_init)
> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> index 821def05658f..6be9a93f611b 100644
> --- a/include/hw/vfio/vfio-common.h
> +++ b/include/hw/vfio/vfio-common.h
> @@ -37,6 +37,7 @@ enum {
>       VFIO_DEVICE_TYPE_PCI = 0,
>       VFIO_DEVICE_TYPE_PLATFORM = 1,
>       VFIO_DEVICE_TYPE_CCW = 2,
> +    VFIO_DEVICE_TYPE_AP = 3,
>   };
> 
>   typedef struct VFIOMmap {
> 

The functionality is working as expected.

Tested-by: Pierre Morel<pmorel@linux.ibm.com>

On 27/09/2018 00:54, Tony Krowiak wrote:
> Introduces a VFIO based AP device. The device is defined via
> the QEMU command line by specifying:
> 
>      -device vfio-ap,sysfsdev=<path-to-mediated-matrix-device>
> 
> There may be only one vfio-ap device configured for a guest.
> 
> The mediated matrix device is created by the VFIO AP device
> driver by writing a UUID to a sysfs attribute file (see
> docs/vfio-ap.txt). The mediated matrix device will be named
> after the UUID. Symbolic links to the $uuid are created in
> many places, so the path to the mediated matrix device $uuid
> can be specified in any of the following ways:
> 
> /sys/devices/vfio_ap/matrix/$uuid
> /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough/devices/$uuid
> /sys/bus/mdev/devices/$uuid
> /sys/bus/mdev/drivers/vfio_mdev/$uuid
> 
> When the vfio-ap device is realized, it acquires and opens the
> VFIO iommu group to which the mediated matrix device is
> bound. This causes a VFIO group notification event to be
> signaled. The vfio_ap device driver's group notification
> handler will get called at which time the device driver
> will configure the the AP devices to which the guest will
> be granted access.
> 
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> ---
>   MAINTAINERS                       |   1 +
>   default-configs/s390x-softmmu.mak |   1 +
>   hw/vfio/Makefile.objs             |   1 +
>   hw/vfio/ap.c                      | 181 ++++++++++++++++++++++++++++++
>   include/hw/vfio/vfio-common.h     |   1 +
>   5 files changed, 185 insertions(+)
>   create mode 100644 hw/vfio/ap.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 97e8ed808bc0..29041da69237 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1209,6 +1209,7 @@ F: hw/s390x/ap-device.c
>   F: hw/s390x/ap-bridge.c
>   F: include/hw/s390x/ap-device.h
>   F: include/hw/s390x/ap-bridge.h
> +F: hw/vfio/ap.c
>   L: qemu-s390x@nongnu.org
> 
>   vhost
> diff --git a/default-configs/s390x-softmmu.mak b/default-configs/s390x-softmmu.mak
> index d6b67d50f0e4..5eef37592451 100644
> --- a/default-configs/s390x-softmmu.mak
> +++ b/default-configs/s390x-softmmu.mak
> @@ -7,3 +7,4 @@ CONFIG_S390_FLIC=y
>   CONFIG_S390_FLIC_KVM=$(CONFIG_KVM)
>   CONFIG_VFIO_CCW=$(CONFIG_LINUX)
>   CONFIG_WDT_DIAG288=y
> +CONFIG_VFIO_AP=$(CONFIG_LINUX)
> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
> index a2e7a0a7cf02..8b3f664d85f7 100644
> --- a/hw/vfio/Makefile.objs
> +++ b/hw/vfio/Makefile.objs
> @@ -6,4 +6,5 @@ obj-$(CONFIG_SOFTMMU) += platform.o
>   obj-$(CONFIG_VFIO_XGMAC) += calxeda-xgmac.o
>   obj-$(CONFIG_VFIO_AMD_XGBE) += amd-xgbe.o
>   obj-$(CONFIG_SOFTMMU) += spapr.o
> +obj-$(CONFIG_VFIO_AP) += ap.o
>   endif
> diff --git a/hw/vfio/ap.c b/hw/vfio/ap.c
> new file mode 100644
> index 000000000000..429988f23f98
> --- /dev/null
> +++ b/hw/vfio/ap.c
> @@ -0,0 +1,181 @@
> +/*
> + * VFIO based AP matrix device assignment
> + *
> + * Copyright 2018 IBM Corp.
> + * Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
> + *            Halil Pasic <pasic@linux.ibm.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or (at
> + * your option) any later version. See the COPYING file in the top-level
> + * directory.
> + */
> +
> +#include <linux/vfio.h>
> +#include <sys/ioctl.h>
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/sysbus.h"
> +#include "hw/vfio/vfio.h"
> +#include "hw/vfio/vfio-common.h"
> +#include "hw/s390x/ap-device.h"
> +#include "qemu/error-report.h"
> +#include "qemu/queue.h"
> +#include "qemu/option.h"
> +#include "qemu/config-file.h"
> +#include "cpu.h"
> +#include "kvm_s390x.h"
> +#include "sysemu/sysemu.h"
> +#include "hw/s390x/ap-bridge.h"
> +#include "exec/address-spaces.h"
> +
> +#define VFIO_AP_DEVICE_TYPE      "vfio-ap"
> +
> +typedef struct VFIOAPDevice {
> +    APDevice apdev;
> +    VFIODevice vdev;
> +} VFIOAPDevice;
> +
> +static void vfio_ap_compute_needs_reset(VFIODevice *vdev)
> +{
> +    vdev->needs_reset = false;
> +}
> +
> +/*
> + * We don't need vfio_hot_reset_multi and vfio_eoi operations for
> + * vfio-ap device now.
> + */
> +struct VFIODeviceOps vfio_ap_ops = {
> +    .vfio_compute_needs_reset = vfio_ap_compute_needs_reset,
> +};
> +
> +static void vfio_ap_put_device(VFIOAPDevice *vapdev)
> +{
> +    g_free(vapdev->vdev.name);
> +    vfio_put_base_device(&vapdev->vdev);
> +}
> +
> +static VFIOGroup *vfio_ap_get_group(VFIOAPDevice *vapdev, Error **errp)
> +{
> +    char *tmp, group_path[PATH_MAX];
> +    ssize_t len;
> +    int groupid;
> +
> +    tmp = g_strdup_printf("%s/iommu_group", vapdev->vdev.sysfsdev);
> +    len = readlink(tmp, group_path, sizeof(group_path));
> +    g_free(tmp);
> +
> +    if (len <= 0 || len >= sizeof(group_path)) {
> +        error_setg(errp, "%s: no iommu_group found for %s",
> +                   VFIO_AP_DEVICE_TYPE, vapdev->vdev.sysfsdev);
> +        return NULL;
> +    }
> +
> +    group_path[len] = 0;
> +
> +    if (sscanf(basename(group_path), "%d", &groupid) != 1) {
> +        error_setg(errp, "vfio: failed to read %s", group_path);
> +        return NULL;
> +    }
> +
> +    return vfio_get_group(groupid, &address_space_memory, errp);
> +}
> +
> +static void vfio_ap_realize(DeviceState *dev, Error **errp)
> +{
> +    int ret;
> +    char *mdevid;
> +    Error *local_err = NULL;
> +    VFIOGroup *vfio_group;
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    vfio_group = vfio_ap_get_group(vapdev, &local_err);
> +    if (!vfio_group) {
> +        goto out_err;
> +    }
> +
> +    vapdev->vdev.ops = &vfio_ap_ops;
> +    vapdev->vdev.type = VFIO_DEVICE_TYPE_AP;
> +    mdevid = basename(vapdev->vdev.sysfsdev);
> +    vapdev->vdev.name = g_strdup_printf("%s", mdevid);
> +    vapdev->vdev.dev = dev;
> +
> +    ret = vfio_get_device(vfio_group, mdevid, &vapdev->vdev, &local_err);
> +    if (ret) {
> +        goto out_get_dev_err;
> +    }
> +
> +    /* Enable hardware to intepret AP instructions executed on the guest */
> +    object_property_set_bool(OBJECT(qdev_get_machine()), true, "apie", NULL);
> +
> +    return;
> +
> +out_get_dev_err:
> +    vfio_ap_put_device(vapdev);
> +    vfio_put_group(vfio_group);
> +out_err:
> +    error_propagate(errp, local_err);
> +}
> +
> +static void vfio_ap_unrealize(DeviceState *dev, Error **errp)
> +{
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +    VFIOGroup *group = vapdev->vdev.group;
> +
> +    vfio_ap_put_device(vapdev);
> +    vfio_put_group(group);
> +}
> +
> +static Property vfio_ap_properties[] = {
> +    DEFINE_PROP_STRING("sysfsdev", VFIOAPDevice, vdev.sysfsdev),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void vfio_ap_reset(DeviceState *dev)
> +{
> +    int ret;
> +    APDevice *apdev = DO_UPCAST(APDevice, parent_obj, dev);
> +    VFIOAPDevice *vapdev = DO_UPCAST(VFIOAPDevice, apdev, apdev);
> +
> +    ret = ioctl(vapdev->vdev.fd, VFIO_DEVICE_RESET);
> +    if (ret) {
> +        error_report("%s: failed to reset %s device: %s", __func__,
> +                     vapdev->vdev.name, strerror(ret));
> +    }
> +}
> +
> +static const VMStateDescription vfio_ap_vmstate = {
> +    .name = VFIO_AP_DEVICE_TYPE,
> +    .unmigratable = 1,
> +};
> +
> +static void vfio_ap_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->props = vfio_ap_properties;
> +    dc->vmsd = &vfio_ap_vmstate;
> +    dc->desc = "VFIO-based AP device assignment";
> +    dc->realize = vfio_ap_realize;
> +    dc->unrealize = vfio_ap_unrealize;
> +    dc->hotpluggable = false;
> +    dc->reset = vfio_ap_reset;
> +    dc->bus_type = TYPE_AP_BUS;
> +}
> +
> +static const TypeInfo vfio_ap_info = {
> +    .name = VFIO_AP_DEVICE_TYPE,
> +    .parent = AP_DEVICE_TYPE,
> +    .instance_size = sizeof(VFIOAPDevice),
> +    .class_init = vfio_ap_class_init,
> +};
> +
> +static void vfio_ap_type_init(void)
> +{
> +    type_register_static(&vfio_ap_info);
> +}
> +
> +type_init(vfio_ap_type_init)
> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> index 821def05658f..6be9a93f611b 100644
> --- a/include/hw/vfio/vfio-common.h
> +++ b/include/hw/vfio/vfio-common.h
> @@ -37,6 +37,7 @@ enum {
>       VFIO_DEVICE_TYPE_PCI = 0,
>       VFIO_DEVICE_TYPE_PLATFORM = 1,
>       VFIO_DEVICE_TYPE_CCW = 2,
> +    VFIO_DEVICE_TYPE_AP = 3,
>   };
> 
>   typedef struct VFIOMmap {
> 


It works as expected.

Tested-by: Pierre Morel<pmorel@linux.ibm.com>