Message ID | 20180704145410.794-1-stefanha@redhat.com |
---|---|
State | New |
Headers | show |
Series | throttle-groups: fix hang when group member leaves | expand |
On Wed, Jul 04, 2018 at 03:54:10PM +0100, Stefan Hajnoczi wrote: Sorry you weren't CCed originally, Berto. This one is for you! :) > Throttle groups consist of members sharing one throttling state > (including bps/iops limits). Round-robin scheduling is used to ensure > fairness. If a group member already has a timer pending then other > groups members do not schedule their own timers. The next group member > will have its turn when the existing timer expires. > > A hang may occur when a group member leaves while it had a timer > scheduled. Although the code carefully removes the group member from > the round-robin list, it does not schedule the next member. Therefore > remaining members continue to wait for the removed member's timer to > expire. > > This patch schedules the next request if a timer is pending. > Unfortunately the actual bug is a race condition that I've been unable > to capture in a test case. > > Sometimes drive2 hangs when drive1 is removed from the throttling group: > > $ qemu ... -drive if=none,id=drive1,cache=none,format=qcow2,file=data1.qcow2,iops=100,group=foo \ > -device virtio-blk-pci,id=virtio-blk-pci0,drive=drive1 \ > -drive if=none,id=drive2,cache=none,format=qcow2,file=data2.qcow2,iops=10,group=foo \ > -device virtio-blk-pci,id=virtio-blk-pci1,drive=drive2 > (guest-console1)# fio -filename /dev/vda 4k-seq-read.job > (guest-console2)# fio -filename /dev/vdb 4k-seq-read.job > (qmp) {"execute": "block_set_io_throttle", "arguments": {"device": "drive1","bps": 0,"bps_rd": 0,"bps_wr": 0,"iops": 0,"iops_rd": 0,"iops_wr": 0}} > > Reported-by: Nini Gu <ngu@redhat.com> > RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1535914 > Cc: Alberto Garcia <berto@igalia.com> > Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> > --- > block/throttle-groups.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/block/throttle-groups.c b/block/throttle-groups.c > index 36cc0430c3..e297b04e17 100644 > --- a/block/throttle-groups.c > +++ b/block/throttle-groups.c > @@ -564,6 +564,10 @@ void throttle_group_unregister_tgm(ThrottleGroupMember *tgm) > > qemu_mutex_lock(&tg->lock); > for (i = 0; i < 2; i++) { > + if (timer_pending(tgm->throttle_timers.timers[i])) { > + tg->any_timer_armed[i] = false; > + schedule_next_request(tgm, i); > + } > if (tg->tokens[i] == tgm) { > token = throttle_group_next_tgm(tgm); > /* Take care of the case where this is the last tgm in the group */ > -- > 2.17.1 > >
On Wed, Jul 04, 2018 at 03:54:10PM +0100, Stefan Hajnoczi wrote: > Throttle groups consist of members sharing one throttling state > (including bps/iops limits). Round-robin scheduling is used to ensure > fairness. If a group member already has a timer pending then other > groups members do not schedule their own timers. The next group member > will have its turn when the existing timer expires. > > A hang may occur when a group member leaves while it had a timer > scheduled. Although the code carefully removes the group member from > the round-robin list, it does not schedule the next member. Therefore > remaining members continue to wait for the removed member's timer to > expire. > > This patch schedules the next request if a timer is pending. > Unfortunately the actual bug is a race condition that I've been unable > to capture in a test case. > > Sometimes drive2 hangs when drive1 is removed from the throttling group: > > $ qemu ... -drive if=none,id=drive1,cache=none,format=qcow2,file=data1.qcow2,iops=100,group=foo \ > -device virtio-blk-pci,id=virtio-blk-pci0,drive=drive1 \ > -drive if=none,id=drive2,cache=none,format=qcow2,file=data2.qcow2,iops=10,group=foo \ > -device virtio-blk-pci,id=virtio-blk-pci1,drive=drive2 > (guest-console1)# fio -filename /dev/vda 4k-seq-read.job > (guest-console2)# fio -filename /dev/vdb 4k-seq-read.job > (qmp) {"execute": "block_set_io_throttle", "arguments": {"device": "drive1","bps": 0,"bps_rd": 0,"bps_wr": 0,"iops": 0,"iops_rd": 0,"iops_wr": 0}} Hi Stefan, I realize you want to preserve the long lines to not break the JSON QMP command. But, FWIW, you might want to format it using one of the convenient websites: https://jsonformatter.org/ So your QMP command nicely wraps (for the 'cost' of 11 extra lines): { "execute": "block_set_io_throttle", "arguments": { "device": "drive1", "bps": 0, "bps_rd": 0, "bps_wr": 0, "iops": 0, "iops_rd": 0, "iops_wr": 0 } } [...]
On Wed, Jul 04, 2018 at 03:54:10PM +0100, Stefan Hajnoczi wrote: > Throttle groups consist of members sharing one throttling state > (including bps/iops limits). Round-robin scheduling is used to ensure > fairness. If a group member already has a timer pending then other > groups members do not schedule their own timers. The next group member > will have its turn when the existing timer expires. > > A hang may occur when a group member leaves while it had a timer > scheduled. Although the code carefully removes the group member from > the round-robin list, it does not schedule the next member. Therefore > remaining members continue to wait for the removed member's timer to > expire. > > This patch schedules the next request if a timer is pending. > Unfortunately the actual bug is a race condition that I've been unable > to capture in a test case. > > Sometimes drive2 hangs when drive1 is removed from the throttling group: > > $ qemu ... -drive if=none,id=drive1,cache=none,format=qcow2,file=data1.qcow2,iops=100,group=foo \ > -device virtio-blk-pci,id=virtio-blk-pci0,drive=drive1 \ > -drive if=none,id=drive2,cache=none,format=qcow2,file=data2.qcow2,iops=10,group=foo \ > -device virtio-blk-pci,id=virtio-blk-pci1,drive=drive2 > (guest-console1)# fio -filename /dev/vda 4k-seq-read.job > (guest-console2)# fio -filename /dev/vdb 4k-seq-read.job > (qmp) {"execute": "block_set_io_throttle", "arguments": {"device": "drive1","bps": 0,"bps_rd": 0,"bps_wr": 0,"iops": 0,"iops_rd": 0,"iops_wr": 0}} > > Reported-by: Nini Gu <ngu@redhat.com> > RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1535914 > Cc: Alberto Garcia <berto@igalia.com> > Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> > --- > block/throttle-groups.c | 4 ++++ > 1 file changed, 4 insertions(+) Berto is away in July. I am merging this fix for QEMU 3.0. If there are any comments when Berto is back I'll send a follow-up patch. Applied to my block tree: https://github.com/stefanha/qemu/commits/block Stefan
On Wed 04 Jul 2018 04:54:10 PM CEST, Stefan Hajnoczi wrote: > Throttle groups consist of members sharing one throttling state > (including bps/iops limits). Round-robin scheduling is used to ensure > fairness. If a group member already has a timer pending then other > groups members do not schedule their own timers. The next group > member will have its turn when the existing timer expires. > > A hang may occur when a group member leaves while it had a timer > scheduled. I haven't been able to reproduce this. When a member is removed from the group the pending request queue must already be empty, so does this mean that there's still a timer when the queue is already empty? Berto
On Wed 04 Jul 2018 04:54:10 PM CEST, Stefan Hajnoczi wrote: > Throttle groups consist of members sharing one throttling state > (including bps/iops limits). Round-robin scheduling is used to ensure > fairness. If a group member already has a timer pending then other > groups members do not schedule their own timers. The next group > member will have its turn when the existing timer expires. > > A hang may occur when a group member leaves while it had a timer > scheduled. Ok, I can reproduce this if I run fio with iodepth=1. We're draining the BDS before removing it from a throttle group, and therefore there cannot be any pending requests. So the problem seems to be that when throttle_co_drain_begin() runs the pending requests from a member using throttle_group_co_restart_queue(), it simply uses qemu_co_queue_next() and doesn't touch the timer at all. So it can happen that there's a request in the queue waiting for a timer, and after that call the request is gone but the timer remains. The current patch is perhaps not worth touching at this point (we're about to release QEMU 3.0), but I think that a better solution would be to either a) cancel the existing timer and reset tg->any_timer_armed on the given tgm after throttle_group_co_restart_queue() and before schedule_next_request() if the queue is empty. b) force the existing timer to run immediately instead of calling throttle_group_co_restart_queue(). Seems cleaner, but I haven't tried this one yet. I'll explore them a bit and send a patch. Berto
On Tue 31 Jul 2018 06:47:53 PM CEST, Alberto Garcia wrote: > On Wed 04 Jul 2018 04:54:10 PM CEST, Stefan Hajnoczi wrote: >> Throttle groups consist of members sharing one throttling state >> (including bps/iops limits). Round-robin scheduling is used to ensure >> fairness. If a group member already has a timer pending then other >> groups members do not schedule their own timers. The next group >> member will have its turn when the existing timer expires. >> >> A hang may occur when a group member leaves while it had a timer >> scheduled. > > Ok, I can reproduce this if I run fio with iodepth=1. I managed to write a test case for this, but unfortunately it seems that this patch is not enough and it's still possible to hang QEMU 3.0.0-rc2. I expect to have a fix for tomorrow. Berto
diff --git a/block/throttle-groups.c b/block/throttle-groups.c index 36cc0430c3..e297b04e17 100644 --- a/block/throttle-groups.c +++ b/block/throttle-groups.c @@ -564,6 +564,10 @@ void throttle_group_unregister_tgm(ThrottleGroupMember *tgm) qemu_mutex_lock(&tg->lock); for (i = 0; i < 2; i++) { + if (timer_pending(tgm->throttle_timers.timers[i])) { + tg->any_timer_armed[i] = false; + schedule_next_request(tgm, i); + } if (tg->tokens[i] == tgm) { token = throttle_group_next_tgm(tgm); /* Take care of the case where this is the last tgm in the group */
Throttle groups consist of members sharing one throttling state (including bps/iops limits). Round-robin scheduling is used to ensure fairness. If a group member already has a timer pending then other groups members do not schedule their own timers. The next group member will have its turn when the existing timer expires. A hang may occur when a group member leaves while it had a timer scheduled. Although the code carefully removes the group member from the round-robin list, it does not schedule the next member. Therefore remaining members continue to wait for the removed member's timer to expire. This patch schedules the next request if a timer is pending. Unfortunately the actual bug is a race condition that I've been unable to capture in a test case. Sometimes drive2 hangs when drive1 is removed from the throttling group: $ qemu ... -drive if=none,id=drive1,cache=none,format=qcow2,file=data1.qcow2,iops=100,group=foo \ -device virtio-blk-pci,id=virtio-blk-pci0,drive=drive1 \ -drive if=none,id=drive2,cache=none,format=qcow2,file=data2.qcow2,iops=10,group=foo \ -device virtio-blk-pci,id=virtio-blk-pci1,drive=drive2 (guest-console1)# fio -filename /dev/vda 4k-seq-read.job (guest-console2)# fio -filename /dev/vdb 4k-seq-read.job (qmp) {"execute": "block_set_io_throttle", "arguments": {"device": "drive1","bps": 0,"bps_rd": 0,"bps_wr": 0,"iops": 0,"iops_rd": 0,"iops_wr": 0}} Reported-by: Nini Gu <ngu@redhat.com> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1535914 Cc: Alberto Garcia <berto@igalia.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> --- block/throttle-groups.c | 4 ++++ 1 file changed, 4 insertions(+)