@@ -369,7 +369,8 @@
'data': { 'host': 'str',
'service': 'str',
'family': 'NetworkAddressFamily',
- 'websocket': 'bool' } }
+ 'websocket': 'bool' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncServerInfo:
@@ -383,7 +384,8 @@
##
{ 'struct': 'VncServerInfo',
'base': 'VncBasicInfo',
- 'data': { '*auth': 'str' } }
+ 'data': { '*auth': 'str' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncClientInfo:
@@ -400,7 +402,8 @@
##
{ 'struct': 'VncClientInfo',
'base': 'VncBasicInfo',
- 'data': { '*x509_dname': 'str', '*sasl_username': 'str' } }
+ 'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncInfo:
@@ -441,7 +444,8 @@
{ 'struct': 'VncInfo',
'data': {'enabled': 'bool', '*host': 'str',
'*family': 'NetworkAddressFamily',
- '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
+ '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncPrimaryAuth:
@@ -452,7 +456,8 @@
##
{ 'enum': 'VncPrimaryAuth',
'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
- 'tls', 'vencrypt', 'sasl' ] }
+ 'tls', 'vencrypt', 'sasl' ],
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncVencryptSubAuth:
@@ -466,8 +471,8 @@
'tls-none', 'x509-none',
'tls-vnc', 'x509-vnc',
'tls-plain', 'x509-plain',
- 'tls-sasl', 'x509-sasl' ] }
-
+ 'tls-sasl', 'x509-sasl' ],
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncServerInfo2:
@@ -484,8 +489,8 @@
{ 'struct': 'VncServerInfo2',
'base': 'VncBasicInfo',
'data': { 'auth' : 'VncPrimaryAuth',
- '*vencrypt' : 'VncVencryptSubAuth' } }
-
+ '*vencrypt' : 'VncVencryptSubAuth' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VncInfo2:
@@ -517,7 +522,8 @@
'clients' : ['VncClientInfo'],
'auth' : 'VncPrimaryAuth',
'*vencrypt' : 'VncVencryptSubAuth',
- '*display' : 'str' } }
+ '*display' : 'str' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @query-vnc:
@@ -548,8 +554,8 @@
# }
#
##
-{ 'command': 'query-vnc', 'returns': 'VncInfo' }
-
+{ 'command': 'query-vnc', 'returns': 'VncInfo',
+ 'if': 'defined(CONFIG_VNC)' }
##
# @query-vnc-servers:
#
@@ -559,7 +565,8 @@
#
# Since: 2.3
##
-{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'] }
+{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
+ 'if': 'defined(CONFIG_VNC)' }
##
# @change-vnc-password:
@@ -573,7 +580,8 @@
# Notes: An empty password in this command will set the password to the empty
# string. Existing clients are unaffected by executing this command.
##
-{ 'command': 'change-vnc-password', 'data': {'password': 'str'} }
+{ 'command': 'change-vnc-password', 'data': {'password': 'str'},
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VNC_CONNECTED:
@@ -602,7 +610,8 @@
##
{ 'event': 'VNC_CONNECTED',
'data': { 'server': 'VncServerInfo',
- 'client': 'VncBasicInfo' } }
+ 'client': 'VncBasicInfo' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VNC_INITIALIZED:
@@ -629,7 +638,8 @@
##
{ 'event': 'VNC_INITIALIZED',
'data': { 'server': 'VncServerInfo',
- 'client': 'VncClientInfo' } }
+ 'client': 'VncClientInfo' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# @VNC_DISCONNECTED:
@@ -655,7 +665,8 @@
##
{ 'event': 'VNC_DISCONNECTED',
'data': { 'server': 'VncServerInfo',
- 'client': 'VncClientInfo' } }
+ 'client': 'VncClientInfo' },
+ 'if': 'defined(CONFIG_VNC)' }
##
# = Input
@@ -291,7 +291,9 @@ struct VncState
bool encode_ws;
bool websocket;
+#ifdef CONFIG_VNC
VncClientInfo *info;
+#endif
Buffer output;
Buffer input;
@@ -613,6 +613,7 @@ void hmp_info_blockstats(Monitor *mon, const QDict *qdict)
qapi_free_BlockStatsList(stats_list);
}
+#ifdef CONFIG_VNC
/* Helper for hmp_info_vnc_clients, _servers */
static void hmp_info_VncBasicInfo(Monitor *mon, VncBasicInfo *info,
const char *name)
@@ -700,6 +701,7 @@ void hmp_info_vnc(Monitor *mon, const QDict *qdict)
qapi_free_VncInfo2List(info2l);
}
+#endif
#ifdef CONFIG_SPICE
void hmp_info_spice(Monitor *mon, const QDict *qdict)
@@ -1738,12 +1740,14 @@ void hmp_eject(Monitor *mon, const QDict *qdict)
hmp_handle_error(mon, &err);
}
+#ifdef CONFIG_VNC
static void hmp_change_read_arg(void *opaque, const char *password,
void *readline_opaque)
{
qmp_change_vnc_password(password, NULL);
monitor_read_command(opaque, 1);
}
+#endif
void hmp_change(Monitor *mon, const QDict *qdict)
{
@@ -1754,6 +1758,7 @@ void hmp_change(Monitor *mon, const QDict *qdict)
BlockdevChangeReadOnlyMode read_only_mode = 0;
Error *err = NULL;
+#ifdef CONFIG_VNC
if (strcmp(device, "vnc") == 0) {
if (read_only) {
monitor_printf(mon,
@@ -1768,7 +1773,9 @@ void hmp_change(Monitor *mon, const QDict *qdict)
}
}
qmp_change("vnc", target, !!arg, arg, &err);
- } else {
+ } else
+#endif
+ {
if (read_only) {
read_only_mode =
qapi_enum_parse(&BlockdevChangeReadOnlyMode_lookup,
@@ -125,22 +125,6 @@ void qmp_cpu_add(int64_t id, Error **errp)
}
}
-#ifndef CONFIG_VNC
-/* If VNC support is enabled, the "true" query-vnc command is
- defined in the VNC subsystem */
-VncInfo *qmp_query_vnc(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "vnc");
- return NULL;
-};
-
-VncInfo2List *qmp_query_vnc_servers(Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "vnc");
- return NULL;
-};
-#endif
-
#ifndef CONFIG_SPICE
/*
* qmp-commands.hx ensures that QMP command query-spice exists only
@@ -398,23 +382,17 @@ static void qmp_change_vnc(const char *target, bool has_arg, const char *arg,
qmp_change_vnc_listen(target, errp);
}
}
-#else
-void qmp_change_vnc_password(const char *password, Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "vnc");
-}
-static void qmp_change_vnc(const char *target, bool has_arg, const char *arg,
- Error **errp)
-{
- error_setg(errp, QERR_FEATURE_DISABLED, "vnc");
-}
#endif /* !CONFIG_VNC */
void qmp_change(const char *device, const char *target,
bool has_arg, const char *arg, Error **errp)
{
if (strcmp(device, "vnc") == 0) {
+#ifdef CONFIG_VNC
qmp_change_vnc(target, has_arg, arg, errp);
+#else
+ error_setg(errp, QERR_FEATURE_DISABLED, "vnc");
+#endif
} else {
qmp_blockdev_change_medium(true, device, false, NULL, target,
has_arg, arg, false, 0, errp);
@@ -421,6 +421,7 @@ STEXI
Show which guest mouse is receiving events.
ETEXI
+#if defined(CONFIG_VNC)
{
.name = "vnc",
.args_type = "",
@@ -428,6 +429,7 @@ ETEXI
.help = "show the vnc server status",
.cmd = hmp_info_vnc,
},
+#endif
STEXI
@item info vnc
Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> --- qapi/ui.json | 45 ++++++++++++++++++++++++++++----------------- ui/vnc.h | 2 ++ hmp.c | 9 ++++++++- qmp.c | 30 ++++-------------------------- hmp-commands-info.hx | 2 ++ 5 files changed, 44 insertions(+), 44 deletions(-)