@@ -549,6 +549,7 @@ struct ViaISAState {
PCIDevice dev;
qemu_irq cpu_intr;
qemu_irq *isa_irqs_in;
+ uint16_t irq_state[ISA_NUM_IRQS];
ViaSuperIOState via_sio;
MC146818RtcState rtc;
PCIIDEState ide;
@@ -592,6 +593,46 @@ static const TypeInfo via_isa_info = {
},
};
+void via_isa_set_irq(PCIDevice *d, int pin, int level)
+{
+ ViaISAState *s = VIA_ISA(pci_get_function_0(d));
+ uint8_t irq = d->config[PCI_INTERRUPT_LINE], max_irq = 15;
+ int f = PCI_FUNC(d->devfn);
+ uint16_t mask = BIT(f);
+
+ switch (f) {
+ case 2: /* USB ports 0-1 */
+ case 3: /* USB ports 2-3 */
+ max_irq = 14;
+ break;
+ }
+
+ /* Keep track of the state of all sources */
+ if (level) {
+ s->irq_state[0] |= mask;
+ } else {
+ s->irq_state[0] &= ~mask;
+ }
+ if (irq == 0 || irq == 0xff) {
+ return; /* disabled */
+ }
+ if (unlikely(irq > max_irq || irq == 2)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "Invalid ISA IRQ routing %d for %d",
+ irq, f);
+ return;
+ }
+ /* Record source state at mapped IRQ */
+ if (level) {
+ s->irq_state[irq] |= mask;
+ } else {
+ s->irq_state[irq] &= ~mask;
+ }
+ /* Make sure there are no stuck bits if mapping has changed */
+ s->irq_state[irq] &= s->irq_state[0];
+ /* ISA IRQ level is the OR of all sources routed to it */
+ qemu_set_irq(s->isa_irqs_in[irq], !!s->irq_state[irq]);
+}
+
static void via_isa_request_i8259_irq(void *opaque, int irq, int level)
{
ViaISAState *s = opaque;
@@ -34,4 +34,6 @@ struct ViaAC97State {
uint32_t ac97_cmd;
};
+void via_isa_set_irq(PCIDevice *d, int n, int level);
+
#endif
The VIA integrated south bridge chips combine several functions and allow routing their interrupts to any of the ISA IRQs also allowing multiple sources to share the same ISA IRQ. E.g. pegasos2 firmware configures everything to use IRQ 9 but amigaone routes them to separate ISA IRQs so the current simplified routing does not work. Bring back via_isa_set_irq() and change it to take the component that wants to change an IRQ and keep track of interrupt status of each source separately and do the mapping to ISA IRQ within the ISA bridge. This may not handle cases when an ISA IRQ is controlled by devices directly, not going through via_isa_set_irq() such as serial, parallel or keyboard but these IRQs being conventionally fixed are not likely to be change by guests or share with other devices so this does not cause a problem in practice. This reverts commit 4e5a20b6da9b1f6d2e9621ed7eb8b239560104ae. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> --- hw/isa/vt82c686.c | 41 +++++++++++++++++++++++++++++++++++++++ include/hw/isa/vt82c686.h | 2 ++ 2 files changed, 43 insertions(+)