diff mbox series

[v6,7/7] Versal: Connect DWC3 controller with virt-versal

Message ID 1600256469-13130-9-git-send-email-sai.pavan.boddu@xilinx.com
State New
Headers show
Series Make hcd-xhci independent of pci hooks | expand

Commit Message

Sai Pavan Boddu Sept. 16, 2020, 11:41 a.m. UTC 
From: Vikram Garhwal <fnu.vikram@xilinx.com>

Connect dwc3 controller and usb2-reg module to xlnx-versal SOC, its placed
in iou of lpd domain and configure it as dual port host controller. Add the
respective guest dts nodes for "xlnx-versal-virt" machine.

Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
---
 hw/arm/xlnx-versal-virt.c    | 55 ++++++++++++++++++++++++++++++++++++++++++++
 hw/arm/xlnx-versal.c         | 34 +++++++++++++++++++++++++++
 include/hw/arm/xlnx-versal.h | 12 ++++++++++
 3 files changed, 101 insertions(+)

Comments

Edgar E. Iglesias Sept. 16, 2020, 12:30 p.m. UTC | #1 
On Wed, Sep 16, 2020 at 05:11:09PM +0530, Sai Pavan Boddu wrote:
> From: Vikram Garhwal <fnu.vikram@xilinx.com>
> 
> Connect dwc3 controller and usb2-reg module to xlnx-versal SOC, its placed
> in iou of lpd domain and configure it as dual port host controller. Add the
> respective guest dts nodes for "xlnx-versal-virt" machine.
> 
> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
> ---
>  hw/arm/xlnx-versal-virt.c    | 55 ++++++++++++++++++++++++++++++++++++++++++++
>  hw/arm/xlnx-versal.c         | 34 +++++++++++++++++++++++++++
>  include/hw/arm/xlnx-versal.h | 12 ++++++++++
>  3 files changed, 101 insertions(+)
> 
> diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
> index 1f9409e..2b4564b 100644
> --- a/hw/arm/xlnx-versal-virt.c
> +++ b/hw/arm/xlnx-versal-virt.c
> @@ -41,6 +41,8 @@ struct VersalVirt {
>          uint32_t ethernet_phy[2];
>          uint32_t clk_125Mhz;
>          uint32_t clk_25Mhz;
> +        uint32_t usb;
> +        uint32_t dwc;
>      } phandle;
>      struct arm_boot_info binfo;
>  
> @@ -68,6 +70,8 @@ static void fdt_create(VersalVirt *s)
>      s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt);
>      s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt);
>  
> +    s->phandle.usb = qemu_fdt_alloc_phandle(s->fdt);
> +    s->phandle.dwc = qemu_fdt_alloc_phandle(s->fdt);
>      /* Create /chosen node for load_dtb.  */
>      qemu_fdt_add_subnode(s->fdt, "/chosen");
>  
> @@ -150,6 +154,56 @@ static void fdt_add_timer_nodes(VersalVirt *s)
>                       compat, sizeof(compat));
>  }
>  
> +static void fdt_add_usb_xhci_nodes(VersalVirt *s)
> +{
> +    const char clocknames[] = "bus_clk\0ref_clk";
> +    char *name = g_strdup_printf("/usb@%" PRIx32, MM_USB2_CTRL_REGS);
> +    const char compat[] = "xlnx,versal-dwc3";

Need a blank line here.

> +    qemu_fdt_add_subnode(s->fdt, name);
> +    qemu_fdt_setprop(s->fdt, name, "compatible",
> +                         compat, sizeof(compat));
> +    qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> +                                 2, MM_USB2_CTRL_REGS,
> +                                 2, MM_USB2_CTRL_REGS_SIZE);
> +    qemu_fdt_setprop(s->fdt, name, "clock-names",
> +                         clocknames, sizeof(clocknames));
> +    qemu_fdt_setprop_cells(s->fdt, name, "clocks",
> +                               s->phandle.clk_25Mhz, s->phandle.clk_125Mhz);
> +    qemu_fdt_setprop(s->fdt, name, "ranges", NULL, 0);
> +    qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 2);
> +    qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 2);
> +    qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.usb);
> +    g_free(name);
> +
> +    {
> +        const char irq_name[] = "dwc_usb3";
> +        const char compat[] = "snps,dwc3";

Here too.


> +        name = g_strdup_printf("/usb@%" PRIx32 "/dwc3@%" PRIx32,
> +                               MM_USB2_CTRL_REGS, MM_USB_XHCI_0);
> +        qemu_fdt_add_subnode(s->fdt, name);
> +        qemu_fdt_setprop(s->fdt, name, "compatible",
> +                         compat, sizeof(compat));
> +        qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> +                                     2, MM_USB_XHCI_0, 2, MM_USB_XHCI_0_SIZE);
> +        qemu_fdt_setprop(s->fdt, name, "interrupt-names",
> +                         irq_name, sizeof(irq_name));
> +        qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
> +                                   GIC_FDT_IRQ_TYPE_SPI, VERSAL_USB0_IRQ_0,
> +                                   GIC_FDT_IRQ_FLAGS_LEVEL_HI);
> +        qemu_fdt_setprop_cell(s->fdt, name,
> +                              "snps,quirk-frame-length-adjustment", 0x20);
> +        qemu_fdt_setprop_cells(s->fdt, name, "#stream-id-cells", 1);
> +        qemu_fdt_setprop_string(s->fdt, name, "dr_mode", "host");
> +        qemu_fdt_setprop_string(s->fdt, name, "phy-names", "usb3-phy");
> +        qemu_fdt_setprop(s->fdt, name, "snps,dis_u2_susphy_quirk", NULL, 0);
> +        qemu_fdt_setprop(s->fdt, name, "snps,dis_u3_susphy_quirk", NULL, 0);
> +        qemu_fdt_setprop(s->fdt, name, "snps,refclk_fladj", NULL, 0);
> +        qemu_fdt_setprop(s->fdt, name, "snps,mask_phy_reset", NULL, 0);
> +        qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.dwc);
> +        qemu_fdt_setprop_string(s->fdt, name, "maximum-speed", "high-speed");
> +        g_free(name);
> +    }
> +}
>  static void fdt_add_uart_nodes(VersalVirt *s)
>  {
>      uint64_t addrs[] = { MM_UART1, MM_UART0 };
> @@ -517,6 +571,7 @@ static void versal_virt_init(MachineState *machine)
>      fdt_add_gic_nodes(s);
>      fdt_add_timer_nodes(s);
>      fdt_add_zdma_nodes(s);
> +    fdt_add_usb_xhci_nodes(s);
>      fdt_add_sd_nodes(s);
>      fdt_add_rtc_node(s);
>      fdt_add_cpu_nodes(s, psci_conduit);
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index 12ba6c4..88f7dc8 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -145,6 +145,39 @@ static void versal_create_uarts(Versal *s, qemu_irq *pic)
>      }
>  }
>  
> +static void versal_create_usbs(Versal *s, qemu_irq *pic)
> +{
> +    DeviceState *dev, *xhci_dev;
> +    MemoryRegion *mr;
> +
> +    object_initialize_child(OBJECT(s), "dwc3-0", &s->lpd.iou.dwc3,
> +                            TYPE_USB_DWC3);
> +    dev = DEVICE(&s->lpd.iou.dwc3);
> +    xhci_dev = DEVICE(&s->lpd.iou.dwc3.sysbus_xhci);
> +
> +    object_property_set_link(OBJECT(xhci_dev), "dma", OBJECT(&s->mr_ps),
> +                             &error_abort);
> +    qdev_prop_set_uint32(xhci_dev, "intrs", 1);
> +    qdev_prop_set_uint32(xhci_dev, "slots", 2);
> +
> +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> +
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0_DWC3_GLOBAL, mr);
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(xhci_dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0, mr);
> +
> +    sysbus_connect_irq(SYS_BUS_DEVICE(xhci_dev), 0, pic[VERSAL_USB0_IRQ_0]);
> +
> +    object_initialize_child(OBJECT(s), "usb2reg-0", &s->lpd.iou.Usb2Regs,
> +                           TYPE_XILINX_VERSAL_USB2_CTRL_REGS);
> +    dev = DEVICE(&s->lpd.iou.Usb2Regs);
> +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> +
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB2_CTRL_REGS, mr);
> +}
> +
>  static void versal_create_gems(Versal *s, qemu_irq *pic)
>  {
>      int i;
> @@ -333,6 +366,7 @@ static void versal_realize(DeviceState *dev, Error **errp)
>      versal_create_apu_cpus(s);
>      versal_create_apu_gic(s, pic);
>      versal_create_uarts(s, pic);
> +    versal_create_usbs(s, pic);
>      versal_create_gems(s, pic);
>      versal_create_admas(s, pic);
>      versal_create_sds(s, pic);
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index eaa9023..a428933 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -21,6 +21,8 @@
>  #include "hw/net/cadence_gem.h"
>  #include "hw/rtc/xlnx-zynqmp-rtc.h"
>  #include "qom/object.h"
> +#include "hw/usb/hcd-dwc3.h"
> +#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
>  
>  #define TYPE_XLNX_VERSAL "xlnx-versal"
>  typedef struct Versal Versal;
> @@ -61,6 +63,8 @@ struct Versal {
>              PL011State uart[XLNX_VERSAL_NR_UARTS];
>              CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
>              XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
> +            USBDWC3 dwc3;
> +            VersalUsb2CtrlRegs Usb2Regs;

Can you please add a sub-struct for the usb stuff?
e.g:
struct {
    USBDWC3 dwc3;
    VersalUsb2CtrlRegs regs;
} usb;

>          } iou;
>      } lpd;
>  
> @@ -90,6 +94,7 @@ struct Versal {
>  
>  #define VERSAL_UART0_IRQ_0         18
>  #define VERSAL_UART1_IRQ_0         19
> +#define VERSAL_USB0_IRQ_0          22
>  #define VERSAL_GEM0_IRQ_0          56
>  #define VERSAL_GEM0_WAKE_IRQ_0     57
>  #define VERSAL_GEM1_IRQ_0          58
> @@ -127,6 +132,13 @@ struct Versal {
>  #define MM_OCM                      0xfffc0000U
>  #define MM_OCM_SIZE                 0x40000
>  
> +#define MM_USB2_CTRL_REGS           0xFF9D0000
> +#define MM_USB2_CTRL_REGS_SIZE      0x10000
> +
> +#define MM_USB_XHCI_0               0xFE200000
> +#define MM_USB_XHCI_0_SIZE          0x10000
> +#define MM_USB_XHCI_0_DWC3_GLOBAL   (MM_USB_XHCI_0 + 0xC100)
> +
>  #define MM_TOP_DDR                  0x0
>  #define MM_TOP_DDR_SIZE             0x80000000U
>  #define MM_TOP_DDR_2                0x800000000ULL
> -- 
> 2.7.4
>
Sai Pavan Boddu Sept. 16, 2020, 2:15 p.m. UTC | #2 
Hi Edgar,

Thanks for suggestions, I will send V7 with those changes.

Regards,
Sai Pavan

> -----Original Message-----
> From: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> Sent: Wednesday, September 16, 2020 6:01 PM
> To: Sai Pavan Boddu <saipava@xilinx.com>
> Cc: Peter Maydell <peter.maydell@linaro.org>; Markus Armbruster
> <armbru@redhat.com>; 'Marc-André Lureau'
> <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;
> Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;
> Francisco Eduardo Iglesias <figlesia@xilinx.com>; qemu-devel@nongnu.org;
> Alistair Francis <alistair.francis@wdc.com>; Eduardo Habkost
> <ehabkost@redhat.com>; Ying Fang <fangying1@huawei.com>; 'Philippe
> Mathieu-Daudé' <philmd@redhat.com>; Vikram Garhwal
> <fnuv@xilinx.com>; Paul Zimmerman <pauldzim@gmail.com>; Sai Pavan
> Boddu <saipava@xilinx.com>
> Subject: Re: [PATCH v6 7/7] Versal: Connect DWC3 controller with virt-versal
> 
> On Wed, Sep 16, 2020 at 05:11:09PM +0530, Sai Pavan Boddu wrote:
> > From: Vikram Garhwal <fnu.vikram@xilinx.com>
> >
> > Connect dwc3 controller and usb2-reg module to xlnx-versal SOC, its
> > placed in iou of lpd domain and configure it as dual port host
> > controller. Add the respective guest dts nodes for "xlnx-versal-virt"
> machine.
> >
> > Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> > Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
> > ---
> >  hw/arm/xlnx-versal-virt.c    | 55
> ++++++++++++++++++++++++++++++++++++++++++++
> >  hw/arm/xlnx-versal.c         | 34 +++++++++++++++++++++++++++
> >  include/hw/arm/xlnx-versal.h | 12 ++++++++++
> >  3 files changed, 101 insertions(+)
> >
> > diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
> > index 1f9409e..2b4564b 100644
> > --- a/hw/arm/xlnx-versal-virt.c
> > +++ b/hw/arm/xlnx-versal-virt.c
> > @@ -41,6 +41,8 @@ struct VersalVirt {
> >          uint32_t ethernet_phy[2];
> >          uint32_t clk_125Mhz;
> >          uint32_t clk_25Mhz;
> > +        uint32_t usb;
> > +        uint32_t dwc;
> >      } phandle;
> >      struct arm_boot_info binfo;
> >
> > @@ -68,6 +70,8 @@ static void fdt_create(VersalVirt *s)
> >      s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt);
> >      s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt);
> >
> > +    s->phandle.usb = qemu_fdt_alloc_phandle(s->fdt);
> > +    s->phandle.dwc = qemu_fdt_alloc_phandle(s->fdt);
> >      /* Create /chosen node for load_dtb.  */
> >      qemu_fdt_add_subnode(s->fdt, "/chosen");
> >
> > @@ -150,6 +154,56 @@ static void fdt_add_timer_nodes(VersalVirt *s)
> >                       compat, sizeof(compat));  }
> >
> > +static void fdt_add_usb_xhci_nodes(VersalVirt *s) {
> > +    const char clocknames[] = "bus_clk\0ref_clk";
> > +    char *name = g_strdup_printf("/usb@%" PRIx32,
> MM_USB2_CTRL_REGS);
> > +    const char compat[] = "xlnx,versal-dwc3";
> 
> Need a blank line here.
> 
> > +    qemu_fdt_add_subnode(s->fdt, name);
> > +    qemu_fdt_setprop(s->fdt, name, "compatible",
> > +                         compat, sizeof(compat));
> > +    qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> > +                                 2, MM_USB2_CTRL_REGS,
> > +                                 2, MM_USB2_CTRL_REGS_SIZE);
> > +    qemu_fdt_setprop(s->fdt, name, "clock-names",
> > +                         clocknames, sizeof(clocknames));
> > +    qemu_fdt_setprop_cells(s->fdt, name, "clocks",
> > +                               s->phandle.clk_25Mhz, s->phandle.clk_125Mhz);
> > +    qemu_fdt_setprop(s->fdt, name, "ranges", NULL, 0);
> > +    qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 2);
> > +    qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 2);
> > +    qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.usb);
> > +    g_free(name);
> > +
> > +    {
> > +        const char irq_name[] = "dwc_usb3";
> > +        const char compat[] = "snps,dwc3";
> 
> Here too.
> 
> 
> > +        name = g_strdup_printf("/usb@%" PRIx32 "/dwc3@%" PRIx32,
> > +                               MM_USB2_CTRL_REGS, MM_USB_XHCI_0);
> > +        qemu_fdt_add_subnode(s->fdt, name);
> > +        qemu_fdt_setprop(s->fdt, name, "compatible",
> > +                         compat, sizeof(compat));
> > +        qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> > +                                     2, MM_USB_XHCI_0, 2, MM_USB_XHCI_0_SIZE);
> > +        qemu_fdt_setprop(s->fdt, name, "interrupt-names",
> > +                         irq_name, sizeof(irq_name));
> > +        qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
> > +                                   GIC_FDT_IRQ_TYPE_SPI, VERSAL_USB0_IRQ_0,
> > +                                   GIC_FDT_IRQ_FLAGS_LEVEL_HI);
> > +        qemu_fdt_setprop_cell(s->fdt, name,
> > +                              "snps,quirk-frame-length-adjustment", 0x20);
> > +        qemu_fdt_setprop_cells(s->fdt, name, "#stream-id-cells", 1);
> > +        qemu_fdt_setprop_string(s->fdt, name, "dr_mode", "host");
> > +        qemu_fdt_setprop_string(s->fdt, name, "phy-names", "usb3-phy");
> > +        qemu_fdt_setprop(s->fdt, name, "snps,dis_u2_susphy_quirk", NULL,
> 0);
> > +        qemu_fdt_setprop(s->fdt, name, "snps,dis_u3_susphy_quirk", NULL,
> 0);
> > +        qemu_fdt_setprop(s->fdt, name, "snps,refclk_fladj", NULL, 0);
> > +        qemu_fdt_setprop(s->fdt, name, "snps,mask_phy_reset", NULL, 0);
> > +        qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.dwc);
> > +        qemu_fdt_setprop_string(s->fdt, name, "maximum-speed", "high-
> speed");
> > +        g_free(name);
> > +    }
> > +}
> >  static void fdt_add_uart_nodes(VersalVirt *s)  {
> >      uint64_t addrs[] = { MM_UART1, MM_UART0 }; @@ -517,6 +571,7 @@
> > static void versal_virt_init(MachineState *machine)
> >      fdt_add_gic_nodes(s);
> >      fdt_add_timer_nodes(s);
> >      fdt_add_zdma_nodes(s);
> > +    fdt_add_usb_xhci_nodes(s);
> >      fdt_add_sd_nodes(s);
> >      fdt_add_rtc_node(s);
> >      fdt_add_cpu_nodes(s, psci_conduit); diff --git
> > a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index 12ba6c4..88f7dc8
> > 100644
> > --- a/hw/arm/xlnx-versal.c
> > +++ b/hw/arm/xlnx-versal.c
> > @@ -145,6 +145,39 @@ static void versal_create_uarts(Versal *s,
> qemu_irq *pic)
> >      }
> >  }
> >
> > +static void versal_create_usbs(Versal *s, qemu_irq *pic) {
> > +    DeviceState *dev, *xhci_dev;
> > +    MemoryRegion *mr;
> > +
> > +    object_initialize_child(OBJECT(s), "dwc3-0", &s->lpd.iou.dwc3,
> > +                            TYPE_USB_DWC3);
> > +    dev = DEVICE(&s->lpd.iou.dwc3);
> > +    xhci_dev = DEVICE(&s->lpd.iou.dwc3.sysbus_xhci);
> > +
> > +    object_property_set_link(OBJECT(xhci_dev), "dma", OBJECT(&s-
> >mr_ps),
> > +                             &error_abort);
> > +    qdev_prop_set_uint32(xhci_dev, "intrs", 1);
> > +    qdev_prop_set_uint32(xhci_dev, "slots", 2);
> > +
> > +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> > +
> > +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> > +    memory_region_add_subregion(&s->mr_ps,
> MM_USB_XHCI_0_DWC3_GLOBAL, mr);
> > +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(xhci_dev), 0);
> > +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0, mr);
> > +
> > +    sysbus_connect_irq(SYS_BUS_DEVICE(xhci_dev), 0,
> > + pic[VERSAL_USB0_IRQ_0]);
> > +
> > +    object_initialize_child(OBJECT(s), "usb2reg-0", &s->lpd.iou.Usb2Regs,
> > +                           TYPE_XILINX_VERSAL_USB2_CTRL_REGS);
> > +    dev = DEVICE(&s->lpd.iou.Usb2Regs);
> > +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> > +
> > +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> > +    memory_region_add_subregion(&s->mr_ps, MM_USB2_CTRL_REGS,
> mr); }
> > +
> >  static void versal_create_gems(Versal *s, qemu_irq *pic)  {
> >      int i;
> > @@ -333,6 +366,7 @@ static void versal_realize(DeviceState *dev, Error
> **errp)
> >      versal_create_apu_cpus(s);
> >      versal_create_apu_gic(s, pic);
> >      versal_create_uarts(s, pic);
> > +    versal_create_usbs(s, pic);
> >      versal_create_gems(s, pic);
> >      versal_create_admas(s, pic);
> >      versal_create_sds(s, pic);
> > diff --git a/include/hw/arm/xlnx-versal.h
> > b/include/hw/arm/xlnx-versal.h index eaa9023..a428933 100644
> > --- a/include/hw/arm/xlnx-versal.h
> > +++ b/include/hw/arm/xlnx-versal.h
> > @@ -21,6 +21,8 @@
> >  #include "hw/net/cadence_gem.h"
> >  #include "hw/rtc/xlnx-zynqmp-rtc.h"
> >  #include "qom/object.h"
> > +#include "hw/usb/hcd-dwc3.h"
> > +#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
> >
> >  #define TYPE_XLNX_VERSAL "xlnx-versal"
> >  typedef struct Versal Versal;
> > @@ -61,6 +63,8 @@ struct Versal {
> >              PL011State uart[XLNX_VERSAL_NR_UARTS];
> >              CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
> >              XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
> > +            USBDWC3 dwc3;
> > +            VersalUsb2CtrlRegs Usb2Regs;
> 
> Can you please add a sub-struct for the usb stuff?
> e.g:
> struct {
>     USBDWC3 dwc3;
>     VersalUsb2CtrlRegs regs;
> } usb;
> 
> >          } iou;
> >      } lpd;
> >
> > @@ -90,6 +94,7 @@ struct Versal {
> >
> >  #define VERSAL_UART0_IRQ_0         18
> >  #define VERSAL_UART1_IRQ_0         19
> > +#define VERSAL_USB0_IRQ_0          22
> >  #define VERSAL_GEM0_IRQ_0          56
> >  #define VERSAL_GEM0_WAKE_IRQ_0     57
> >  #define VERSAL_GEM1_IRQ_0          58
> > @@ -127,6 +132,13 @@ struct Versal {
> >  #define MM_OCM                      0xfffc0000U
> >  #define MM_OCM_SIZE                 0x40000
> >
> > +#define MM_USB2_CTRL_REGS           0xFF9D0000
> > +#define MM_USB2_CTRL_REGS_SIZE      0x10000
> > +
> > +#define MM_USB_XHCI_0               0xFE200000
> > +#define MM_USB_XHCI_0_SIZE          0x10000
> > +#define MM_USB_XHCI_0_DWC3_GLOBAL   (MM_USB_XHCI_0 + 0xC100)
> > +
> >  #define MM_TOP_DDR                  0x0
> >  #define MM_TOP_DDR_SIZE             0x80000000U
> >  #define MM_TOP_DDR_2                0x800000000ULL
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
index 1f9409e..2b4564b 100644
--- a/hw/arm/xlnx-versal-virt.c
+++ b/hw/arm/xlnx-versal-virt.c
@@ -41,6 +41,8 @@  struct VersalVirt {
         uint32_t ethernet_phy[2];
         uint32_t clk_125Mhz;
         uint32_t clk_25Mhz;
+        uint32_t usb;
+        uint32_t dwc;
     } phandle;
     struct arm_boot_info binfo;
 
@@ -68,6 +70,8 @@  static void fdt_create(VersalVirt *s)
     s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt);
     s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt);
 
+    s->phandle.usb = qemu_fdt_alloc_phandle(s->fdt);
+    s->phandle.dwc = qemu_fdt_alloc_phandle(s->fdt);
     /* Create /chosen node for load_dtb.  */
     qemu_fdt_add_subnode(s->fdt, "/chosen");
 
@@ -150,6 +154,56 @@  static void fdt_add_timer_nodes(VersalVirt *s)
                      compat, sizeof(compat));
 }
 
+static void fdt_add_usb_xhci_nodes(VersalVirt *s)
+{
+    const char clocknames[] = "bus_clk\0ref_clk";
+    char *name = g_strdup_printf("/usb@%" PRIx32, MM_USB2_CTRL_REGS);
+    const char compat[] = "xlnx,versal-dwc3";
+    qemu_fdt_add_subnode(s->fdt, name);
+    qemu_fdt_setprop(s->fdt, name, "compatible",
+                         compat, sizeof(compat));
+    qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
+                                 2, MM_USB2_CTRL_REGS,
+                                 2, MM_USB2_CTRL_REGS_SIZE);
+    qemu_fdt_setprop(s->fdt, name, "clock-names",
+                         clocknames, sizeof(clocknames));
+    qemu_fdt_setprop_cells(s->fdt, name, "clocks",
+                               s->phandle.clk_25Mhz, s->phandle.clk_125Mhz);
+    qemu_fdt_setprop(s->fdt, name, "ranges", NULL, 0);
+    qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 2);
+    qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 2);
+    qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.usb);
+    g_free(name);
+
+    {
+        const char irq_name[] = "dwc_usb3";
+        const char compat[] = "snps,dwc3";
+        name = g_strdup_printf("/usb@%" PRIx32 "/dwc3@%" PRIx32,
+                               MM_USB2_CTRL_REGS, MM_USB_XHCI_0);
+        qemu_fdt_add_subnode(s->fdt, name);
+        qemu_fdt_setprop(s->fdt, name, "compatible",
+                         compat, sizeof(compat));
+        qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
+                                     2, MM_USB_XHCI_0, 2, MM_USB_XHCI_0_SIZE);
+        qemu_fdt_setprop(s->fdt, name, "interrupt-names",
+                         irq_name, sizeof(irq_name));
+        qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
+                                   GIC_FDT_IRQ_TYPE_SPI, VERSAL_USB0_IRQ_0,
+                                   GIC_FDT_IRQ_FLAGS_LEVEL_HI);
+        qemu_fdt_setprop_cell(s->fdt, name,
+                              "snps,quirk-frame-length-adjustment", 0x20);
+        qemu_fdt_setprop_cells(s->fdt, name, "#stream-id-cells", 1);
+        qemu_fdt_setprop_string(s->fdt, name, "dr_mode", "host");
+        qemu_fdt_setprop_string(s->fdt, name, "phy-names", "usb3-phy");
+        qemu_fdt_setprop(s->fdt, name, "snps,dis_u2_susphy_quirk", NULL, 0);
+        qemu_fdt_setprop(s->fdt, name, "snps,dis_u3_susphy_quirk", NULL, 0);
+        qemu_fdt_setprop(s->fdt, name, "snps,refclk_fladj", NULL, 0);
+        qemu_fdt_setprop(s->fdt, name, "snps,mask_phy_reset", NULL, 0);
+        qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.dwc);
+        qemu_fdt_setprop_string(s->fdt, name, "maximum-speed", "high-speed");
+        g_free(name);
+    }
+}
 static void fdt_add_uart_nodes(VersalVirt *s)
 {
     uint64_t addrs[] = { MM_UART1, MM_UART0 };
@@ -517,6 +571,7 @@  static void versal_virt_init(MachineState *machine)
     fdt_add_gic_nodes(s);
     fdt_add_timer_nodes(s);
     fdt_add_zdma_nodes(s);
+    fdt_add_usb_xhci_nodes(s);
     fdt_add_sd_nodes(s);
     fdt_add_rtc_node(s);
     fdt_add_cpu_nodes(s, psci_conduit);
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index 12ba6c4..88f7dc8 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -145,6 +145,39 @@  static void versal_create_uarts(Versal *s, qemu_irq *pic)
     }
 }
 
+static void versal_create_usbs(Versal *s, qemu_irq *pic)
+{
+    DeviceState *dev, *xhci_dev;
+    MemoryRegion *mr;
+
+    object_initialize_child(OBJECT(s), "dwc3-0", &s->lpd.iou.dwc3,
+                            TYPE_USB_DWC3);
+    dev = DEVICE(&s->lpd.iou.dwc3);
+    xhci_dev = DEVICE(&s->lpd.iou.dwc3.sysbus_xhci);
+
+    object_property_set_link(OBJECT(xhci_dev), "dma", OBJECT(&s->mr_ps),
+                             &error_abort);
+    qdev_prop_set_uint32(xhci_dev, "intrs", 1);
+    qdev_prop_set_uint32(xhci_dev, "slots", 2);
+
+    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
+
+    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0_DWC3_GLOBAL, mr);
+    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(xhci_dev), 0);
+    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0, mr);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(xhci_dev), 0, pic[VERSAL_USB0_IRQ_0]);
+
+    object_initialize_child(OBJECT(s), "usb2reg-0", &s->lpd.iou.Usb2Regs,
+                           TYPE_XILINX_VERSAL_USB2_CTRL_REGS);
+    dev = DEVICE(&s->lpd.iou.Usb2Regs);
+    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
+
+    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+    memory_region_add_subregion(&s->mr_ps, MM_USB2_CTRL_REGS, mr);
+}
+
 static void versal_create_gems(Versal *s, qemu_irq *pic)
 {
     int i;
@@ -333,6 +366,7 @@  static void versal_realize(DeviceState *dev, Error **errp)
     versal_create_apu_cpus(s);
     versal_create_apu_gic(s, pic);
     versal_create_uarts(s, pic);
+    versal_create_usbs(s, pic);
     versal_create_gems(s, pic);
     versal_create_admas(s, pic);
     versal_create_sds(s, pic);
diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
index eaa9023..a428933 100644
--- a/include/hw/arm/xlnx-versal.h
+++ b/include/hw/arm/xlnx-versal.h
@@ -21,6 +21,8 @@ 
 #include "hw/net/cadence_gem.h"
 #include "hw/rtc/xlnx-zynqmp-rtc.h"
 #include "qom/object.h"
+#include "hw/usb/hcd-dwc3.h"
+#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
 
 #define TYPE_XLNX_VERSAL "xlnx-versal"
 typedef struct Versal Versal;
@@ -61,6 +63,8 @@  struct Versal {
             PL011State uart[XLNX_VERSAL_NR_UARTS];
             CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
             XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
+            USBDWC3 dwc3;
+            VersalUsb2CtrlRegs Usb2Regs;
         } iou;
     } lpd;
 
@@ -90,6 +94,7 @@  struct Versal {
 
 #define VERSAL_UART0_IRQ_0         18
 #define VERSAL_UART1_IRQ_0         19
+#define VERSAL_USB0_IRQ_0          22
 #define VERSAL_GEM0_IRQ_0          56
 #define VERSAL_GEM0_WAKE_IRQ_0     57
 #define VERSAL_GEM1_IRQ_0          58
@@ -127,6 +132,13 @@  struct Versal {
 #define MM_OCM                      0xfffc0000U
 #define MM_OCM_SIZE                 0x40000
 
+#define MM_USB2_CTRL_REGS           0xFF9D0000
+#define MM_USB2_CTRL_REGS_SIZE      0x10000
+
+#define MM_USB_XHCI_0               0xFE200000
+#define MM_USB_XHCI_0_SIZE          0x10000
+#define MM_USB_XHCI_0_DWC3_GLOBAL   (MM_USB_XHCI_0 + 0xC100)
+
 #define MM_TOP_DDR                  0x0
 #define MM_TOP_DDR_SIZE             0x80000000U
 #define MM_TOP_DDR_2                0x800000000ULL