diff mbox series

[v3,4/5] s390: vfio_pci: Use a PCI Function structure

Message ID 1567815389-18229-5-git-send-email-mjrosato@linux.ibm.com
State New
Headers show
Series Retrieving zPCI specific info from QEMU | expand

Commit Message

Matthew Rosato Sept. 7, 2019, 12:16 a.m. UTC 
From: Pierre Morel <pmorel@linux.ibm.com>

We use a ClpRspQueryPci structure to hold the information
related to zPCI Function.

This allows us to be ready to support different zPCI functions
and to retrieve the zPCI function information from the host.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
 hw/s390x/s390-pci-bus.c  | 22 +++++++++++++++++-----
 hw/s390x/s390-pci-bus.h  |  1 +
 hw/s390x/s390-pci-inst.c |  8 ++------
 3 files changed, 20 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index e625217..0d404c3 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -770,6 +770,17 @@  static void s390_pci_init_default_group(void)
     resgrp->version = 0;
 }
 
+static void set_pbdev_info(S390PCIBusDevice *pbdev)
+{
+    pbdev->zpci_fn.sdma = ZPCI_SDMA_ADDR;
+    pbdev->zpci_fn.edma = ZPCI_EDMA_ADDR;
+    pbdev->zpci_fn.pchid = 0;
+    pbdev->zpci_fn.ug = ZPCI_DEFAULT_FN_GRP;
+    pbdev->zpci_fn.fid = pbdev->fid;
+    pbdev->zpci_fn.uid = pbdev->uid;
+    pbdev->pci_grp = s390_grp_find(ZPCI_DEFAULT_FN_GRP);
+}
+
 static void s390_pcihost_realize(DeviceState *dev, Error **errp)
 {
     PCIBus *b;
@@ -988,17 +999,18 @@  static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
             }
         }
 
+        pbdev->pdev = pdev;
+        pbdev->iommu = s390_pci_get_iommu(s, pci_get_bus(pdev), pdev->devfn);
+        pbdev->iommu->pbdev = pbdev;
+        pbdev->state = ZPCI_FS_DISABLED;
+        set_pbdev_info(pbdev);
+
         if (object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
             pbdev->fh |= FH_SHM_VFIO;
         } else {
             pbdev->fh |= FH_SHM_EMUL;
         }
 
-        pbdev->pdev = pdev;
-        pbdev->iommu = s390_pci_get_iommu(s, pci_get_bus(pdev), pdev->devfn);
-        pbdev->iommu->pbdev = pbdev;
-        pbdev->state = ZPCI_FS_DISABLED;
-
         if (s390_pci_msix_init(pbdev)) {
             error_setg(errp, "MSI-X support is mandatory "
                        "in the S390 architecture");
diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h
index e95a797..8c969d1 100644
--- a/hw/s390x/s390-pci-bus.h
+++ b/hw/s390x/s390-pci-bus.h
@@ -337,6 +337,7 @@  struct S390PCIBusDevice {
     uint16_t noi;
     uint8_t sum;
     S390PCIGroup *pci_grp;
+    ClpRspQueryPci zpci_fn;
     S390MsixInfo msix;
     AdapterRoutes routes;
     S390PCIIOMMU *iommu;
diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 00dd176..b02c360 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -267,6 +267,8 @@  int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra)
             goto out;
         }
 
+        memcpy(resquery, &pbdev->zpci_fn, sizeof(*resquery));
+
         for (i = 0; i < PCI_BAR_COUNT; i++) {
             uint32_t data = pci_get_long(pbdev->pdev->config +
                 PCI_BASE_ADDRESS_0 + (i * 4));
@@ -280,12 +282,6 @@  int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra)
                     resquery->bar_size[i]);
         }
 
-        stq_p(&resquery->sdma, ZPCI_SDMA_ADDR);
-        stq_p(&resquery->edma, ZPCI_EDMA_ADDR);
-        stl_p(&resquery->fid, pbdev->fid);
-        stw_p(&resquery->pchid, 0);
-        stw_p(&resquery->ug, ZPCI_DEFAULT_FN_GRP);
-        stl_p(&resquery->uid, pbdev->uid);
         stw_p(&resquery->hdr.rsp, CLP_RC_OK);
         break;
     }