Message ID | 1536782900-17656-3-git-send-email-akrowiak@linux.vnet.ibm.com |
---|---|
State | New |
Headers | show |
Series | s390x: vfio-ap: guest dedicated crypto adapters | expand |
Am 12.09.18 um 22:08 schrieb Tony Krowiak: > A new CPU model feature and two new CPU model facilities are > introduced to support AP devices for a KVM guest. > > CPU model features: > > 1. The KVM_S390_VM_CPU_FEAT_AP CPU model feature indicates that > AP facilities are installed. This feature will be enabled by > the kernel only if the AP facilities are installed on the linux > host. This feature must be turned on from userspace to access > AP devices from the KVM guest. The QEMU command line to turn > this feature looks something like this: > > qemu-system-s390x ... -cpu xxx,ap=on > > This feature will be supported for zEC12 and newer CPU models. > The feature will not be supported for older models due to > testability issues. I think we (me, Halil and Pierre) agreed that this should not be a CPU_FEAT but instead some AP_INTERPRETATION toggle, that can be turned on/off dynamically. (CPU_FEAT cannot be changed after CPUs have been created). Can you discuss that with Halil + Pierre?
Am 17.09.18 um 10:19 schrieb David Hildenbrand: > Am 12.09.18 um 22:08 schrieb Tony Krowiak: >> A new CPU model feature and two new CPU model facilities are >> introduced to support AP devices for a KVM guest. >> >> CPU model features: >> >> 1. The KVM_S390_VM_CPU_FEAT_AP CPU model feature indicates that >> AP facilities are installed. This feature will be enabled by >> the kernel only if the AP facilities are installed on the linux >> host. This feature must be turned on from userspace to access >> AP devices from the KVM guest. The QEMU command line to turn >> this feature looks something like this: >> >> qemu-system-s390x ... -cpu xxx,ap=on >> >> This feature will be supported for zEC12 and newer CPU models. >> The feature will not be supported for older models due to >> testability issues. > > I think we (me, Halil and Pierre) agreed that this should not be a > CPU_FEAT but instead some AP_INTERPRETATION toggle, that can be turned > on/off dynamically. (CPU_FEAT cannot be changed after CPUs have been > created). > > Can you discuss that with Halil + Pierre? > > Just found patch #2, I don't see a reason for KVM_S390_VM_CPU_FEAT_AP anymore. You can simply sense KVM_S390_VM_CRYPTO_ENABLE_APIE and use it to indicate the AP cpu feature.
On 09/17/2018 04:19 AM, David Hildenbrand wrote: > Am 12.09.18 um 22:08 schrieb Tony Krowiak: >> A new CPU model feature and two new CPU model facilities are >> introduced to support AP devices for a KVM guest. >> >> CPU model features: >> >> 1. The KVM_S390_VM_CPU_FEAT_AP CPU model feature indicates that >> AP facilities are installed. This feature will be enabled by >> the kernel only if the AP facilities are installed on the linux >> host. This feature must be turned on from userspace to access >> AP devices from the KVM guest. The QEMU command line to turn >> this feature looks something like this: >> >> qemu-system-s390x ... -cpu xxx,ap=on >> >> This feature will be supported for zEC12 and newer CPU models. >> The feature will not be supported for older models due to >> testability issues. > I think we (me, Halil and Pierre) agreed that this should not be a > CPU_FEAT but instead some AP_INTERPRETATION toggle, that can be turned > on/off dynamically. (CPU_FEAT cannot be changed after CPUs have been > created). > > Can you discuss that with Halil + Pierre? I will do that. > >
diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c index 172fb18..60cfeba 100644 --- a/target/s390x/cpu_features.c +++ b/target/s390x/cpu_features.c @@ -39,8 +39,10 @@ static const S390FeatDef s390_features[] = { FEAT_INIT("srs", S390_FEAT_TYPE_STFL, 9, "Sense-running-status facility"), FEAT_INIT("csske", S390_FEAT_TYPE_STFL, 10, "Conditional-SSKE facility"), FEAT_INIT("ctop", S390_FEAT_TYPE_STFL, 11, "Configuration-topology facility"), + FEAT_INIT("apqci", S390_FEAT_TYPE_STFL, 12, "Query AP Configuration Information facility"), FEAT_INIT("ipter", S390_FEAT_TYPE_STFL, 13, "IPTE-range facility"), FEAT_INIT("nonqks", S390_FEAT_TYPE_STFL, 14, "Nonquiescing key-setting facility"), + FEAT_INIT("apft", S390_FEAT_TYPE_STFL, 15, "AP Facilities Test facility"), FEAT_INIT("etf2", S390_FEAT_TYPE_STFL, 16, "Extended-translation facility 2"), FEAT_INIT("msa-base", S390_FEAT_TYPE_STFL, 17, "Message-security-assist facility (excluding subfunctions)"), FEAT_INIT("ldisp", S390_FEAT_TYPE_STFL, 18, "Long-displacement facility"), @@ -129,6 +131,7 @@ static const S390FeatDef s390_features[] = { FEAT_INIT_MISC("dateh2", "DAT-enhancement facility 2"), FEAT_INIT_MISC("cmm", "Collaborative-memory-management facility"), + FEAT_INIT_MISC("ap", "AP instructions installed"), FEAT_INIT("plo-cl", S390_FEAT_TYPE_PLO, 0, "PLO Compare and load (32 bit in general registers)"), FEAT_INIT("plo-clg", S390_FEAT_TYPE_PLO, 1, "PLO Compare and load (64 bit in parameter list)"), diff --git a/target/s390x/cpu_features_def.h b/target/s390x/cpu_features_def.h index ac2c947..5fc7e7b 100644 --- a/target/s390x/cpu_features_def.h +++ b/target/s390x/cpu_features_def.h @@ -27,8 +27,10 @@ typedef enum { S390_FEAT_SENSE_RUNNING_STATUS, S390_FEAT_CONDITIONAL_SSKE, S390_FEAT_CONFIGURATION_TOPOLOGY, + S390_FEAT_AP_QUERY_CONFIG_INFO, S390_FEAT_IPTE_RANGE, S390_FEAT_NONQ_KEY_SETTING, + S390_FEAT_AP_FACILITIES_TEST, S390_FEAT_EXTENDED_TRANSLATION_2, S390_FEAT_MSA, S390_FEAT_LONG_DISPLACEMENT, @@ -119,6 +121,7 @@ typedef enum { /* Misc */ S390_FEAT_DAT_ENH_2, S390_FEAT_CMM, + S390_FEAT_AP, /* PLO */ S390_FEAT_PLO_CL, diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c index 265d25c..7c253ff 100644 --- a/target/s390x/cpu_models.c +++ b/target/s390x/cpu_models.c @@ -786,6 +786,8 @@ static void check_consistency(const S390CPUModel *model) { S390_FEAT_PRNO_TRNG_QRTCR, S390_FEAT_MSA_EXT_5 }, { S390_FEAT_PRNO_TRNG, S390_FEAT_MSA_EXT_5 }, { S390_FEAT_SIE_KSS, S390_FEAT_SIE_F2 }, + { S390_FEAT_AP_QUERY_CONFIG_INFO, S390_FEAT_AP }, + { S390_FEAT_AP_FACILITIES_TEST, S390_FEAT_AP }, }; int i; diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c index 384b61c..70015ea 100644 --- a/target/s390x/gen-features.c +++ b/target/s390x/gen-features.c @@ -447,6 +447,9 @@ static uint16_t full_GEN12_GA1[] = { S390_FEAT_ADAPTER_INT_SUPPRESSION, S390_FEAT_EDAT_2, S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2, + S390_FEAT_AP_QUERY_CONFIG_INFO, + S390_FEAT_AP_FACILITIES_TEST, + S390_FEAT_AP, }; static uint16_t full_GEN12_GA2[] = { diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c index 348e8cc..c4bd84d 100644 --- a/target/s390x/kvm.c +++ b/target/s390x/kvm.c @@ -2134,6 +2134,7 @@ static int kvm_to_feat[][2] = { { KVM_S390_VM_CPU_FEAT_PFMFI, S390_FEAT_SIE_PFMFI}, { KVM_S390_VM_CPU_FEAT_SIGPIF, S390_FEAT_SIE_SIGPIF}, { KVM_S390_VM_CPU_FEAT_KSS, S390_FEAT_SIE_KSS}, + { KVM_S390_VM_CPU_FEAT_AP, S390_FEAT_AP}, }; static int query_cpu_feat(S390FeatBitmap features)
A new CPU model feature and two new CPU model facilities are introduced to support AP devices for a KVM guest. CPU model features: 1. The KVM_S390_VM_CPU_FEAT_AP CPU model feature indicates that AP facilities are installed. This feature will be enabled by the kernel only if the AP facilities are installed on the linux host. This feature must be turned on from userspace to access AP devices from the KVM guest. The QEMU command line to turn this feature looks something like this: qemu-system-s390x ... -cpu xxx,ap=on This feature will be supported for zEC12 and newer CPU models. The feature will not be supported for older models due to testability issues. CPU model facilities: 1. The S390_FEAT_AP_QUERY_CONFIG_INFO feature indicates the AP Query Configuration Information (QCI) facility is installed. This feature will be enabled by the kernel only if the QCI is installed on the host. 2. The S390_FEAT_AP_FACILITY_TEST feature indicates that the AP Facility Test (APFT) facility is installed. This feature will be enabled by the kernel only if the APFT facility is installed on the host. Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> --- target/s390x/cpu_features.c | 3 +++ target/s390x/cpu_features_def.h | 3 +++ target/s390x/cpu_models.c | 2 ++ target/s390x/gen-features.c | 3 +++ target/s390x/kvm.c | 1 + 5 files changed, 12 insertions(+), 0 deletions(-)