| Message ID | 1530270944-11351-23-git-send-email-suzuki.poulose@arm.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: Dynamic & 52bit IPA support | expand |
On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: > Add an option to specify the physical address size used by this > VM. > > Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> > --- > arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- > arm/include/arm-common/kvm-config-arch.h | 1 + > 2 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h > index 04be43d..dabd22c 100644 > --- a/arm/aarch64/include/kvm/kvm-config-arch.h > +++ b/arm/aarch64/include/kvm/kvm-config-arch.h > @@ -8,7 +8,10 @@ > "Create PMUv3 device"), \ > OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ > "Specify random seed for Kernel Address Space " \ > - "Layout Randomization (KASLR)"), > + "Layout Randomization (KASLR)"), \ > + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ > + "Specify maximum physical address size (not " \ > + "the amount of memory)"), Given that this is a shift value, I think the help message could be more informative. Something like: "Specify maximum number of bits in a guest physical address" I think I'd actually leave out any mention of memory, because this does actually have an effect on the amount of addressable memory in a way that I don't think we want to describe in half of a usage message line :) Will
Hi, On 04/07/18 15:09, Will Deacon wrote: > On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >> Add an option to specify the physical address size used by this >> VM. >> >> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >> --- >> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >> arm/include/arm-common/kvm-config-arch.h | 1 + >> 2 files changed, 5 insertions(+), 1 deletion(-) >> >> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >> index 04be43d..dabd22c 100644 >> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >> @@ -8,7 +8,10 @@ >> "Create PMUv3 device"), \ >> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >> "Specify random seed for Kernel Address Space " \ >> - "Layout Randomization (KASLR)"), >> + "Layout Randomization (KASLR)"), \ >> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >> + "Specify maximum physical address size (not " \ >> + "the amount of memory)"), > > Given that this is a shift value, I think the help message could be more > informative. Something like: > > "Specify maximum number of bits in a guest physical address" > > I think I'd actually leave out any mention of memory, because this does > actually have an effect on the amount of addressable memory in a way that I > don't think we want to describe in half of a usage message line :) Is there any particular reasons to expose this option to the user? I have recently sent a series to allow the user to specify the position of the RAM [1]. With that series in mind, I think the user would not really need to specify the maximum physical shift. Instead we could automatically find it. Cheers, [1] http://archive.armlinux.org.uk/lurker/message/20180510.140428.1c295b5b.en.html > > Will >
On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: > On 04/07/18 15:09, Will Deacon wrote: > >On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: > >>Add an option to specify the physical address size used by this > >>VM. > >> > >>Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> > >>--- > >> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- > >> arm/include/arm-common/kvm-config-arch.h | 1 + > >> 2 files changed, 5 insertions(+), 1 deletion(-) > >> > >>diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h > >>index 04be43d..dabd22c 100644 > >>--- a/arm/aarch64/include/kvm/kvm-config-arch.h > >>+++ b/arm/aarch64/include/kvm/kvm-config-arch.h > >>@@ -8,7 +8,10 @@ > >> "Create PMUv3 device"), \ > >> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ > >> "Specify random seed for Kernel Address Space " \ > >>- "Layout Randomization (KASLR)"), > >>+ "Layout Randomization (KASLR)"), \ > >>+ OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ > >>+ "Specify maximum physical address size (not " \ > >>+ "the amount of memory)"), > > > >Given that this is a shift value, I think the help message could be more > >informative. Something like: > > > > "Specify maximum number of bits in a guest physical address" > > > >I think I'd actually leave out any mention of memory, because this does > >actually have an effect on the amount of addressable memory in a way that I > >don't think we want to describe in half of a usage message line :) > Is there any particular reasons to expose this option to the user? > > I have recently sent a series to allow the user to specify the position > of the RAM [1]. With that series in mind, I think the user would not really > need to specify the maximum physical shift. Instead we could automatically > find it. Marc makes a good point that it doesn't help for MMIO regions, so I'm trying to understand whether we can do something differently there and avoid sacrificing the type parameter. Will
Hi Will, On 04/07/18 16:52, Will Deacon wrote: > On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: >> On 04/07/18 15:09, Will Deacon wrote: >>> On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >>>> Add an option to specify the physical address size used by this >>>> VM. >>>> >>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >>>> --- >>>> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >>>> arm/include/arm-common/kvm-config-arch.h | 1 + >>>> 2 files changed, 5 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >>>> index 04be43d..dabd22c 100644 >>>> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >>>> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >>>> @@ -8,7 +8,10 @@ >>>> "Create PMUv3 device"), \ >>>> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >>>> "Specify random seed for Kernel Address Space " \ >>>> - "Layout Randomization (KASLR)"), >>>> + "Layout Randomization (KASLR)"), \ >>>> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >>>> + "Specify maximum physical address size (not " \ >>>> + "the amount of memory)"), >>> >>> Given that this is a shift value, I think the help message could be more >>> informative. Something like: >>> >>> "Specify maximum number of bits in a guest physical address" >>> >>> I think I'd actually leave out any mention of memory, because this does >>> actually have an effect on the amount of addressable memory in a way that I >>> don't think we want to describe in half of a usage message line :) >> Is there any particular reasons to expose this option to the user? >> >> I have recently sent a series to allow the user to specify the position >> of the RAM [1]. With that series in mind, I think the user would not really >> need to specify the maximum physical shift. Instead we could automatically >> find it. > > Marc makes a good point that it doesn't help for MMIO regions, so I'm trying > to understand whether we can do something differently there and avoid > sacrificing the type parameter. I am not sure to understand this. kvmtools knows the memory layout (including MMIOs) of the guest, so couldn't it guess the maximum physical shift for that? Cheers,
On 05/07/18 13:47, Julien Grall wrote: > Hi Will, > > On 04/07/18 16:52, Will Deacon wrote: >> On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: >>> On 04/07/18 15:09, Will Deacon wrote: >>>> On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >>>>> Add an option to specify the physical address size used by this >>>>> VM. >>>>> >>>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >>>>> --- >>>>> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >>>>> arm/include/arm-common/kvm-config-arch.h | 1 + >>>>> 2 files changed, 5 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>> index 04be43d..dabd22c 100644 >>>>> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >>>>> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>> @@ -8,7 +8,10 @@ >>>>> "Create PMUv3 device"), \ >>>>> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >>>>> "Specify random seed for Kernel Address Space " \ >>>>> - "Layout Randomization (KASLR)"), >>>>> + "Layout Randomization (KASLR)"), \ >>>>> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >>>>> + "Specify maximum physical address size (not " \ >>>>> + "the amount of memory)"), >>>> >>>> Given that this is a shift value, I think the help message could be more >>>> informative. Something like: >>>> >>>> "Specify maximum number of bits in a guest physical address" >>>> >>>> I think I'd actually leave out any mention of memory, because this does >>>> actually have an effect on the amount of addressable memory in a way that I >>>> don't think we want to describe in half of a usage message line :) >>> Is there any particular reasons to expose this option to the user? >>> >>> I have recently sent a series to allow the user to specify the position >>> of the RAM [1]. With that series in mind, I think the user would not really >>> need to specify the maximum physical shift. Instead we could automatically >>> find it. >> >> Marc makes a good point that it doesn't help for MMIO regions, so I'm trying >> to understand whether we can do something differently there and avoid >> sacrificing the type parameter. > > I am not sure to understand this. kvmtools knows the memory layout > (including MMIOs) of the guest, so couldn't it guess the maximum > physical shift for that? That's exactly what Will was trying to avoid, by having KVM to compute the size of the IPA space based on the registered memslots. We've now established that it doesn't work, so what we need to define is: - whether we need another ioctl(), or do we carry on piggy-backing on the CPU type, - assuming the latter, whether we can reduce the number of bits used in the ioctl parameter by subtly encoding the IPA size. Thanks, M.
Hi Marc, On 07/05/2018 03:20 PM, Marc Zyngier wrote: > On 05/07/18 13:47, Julien Grall wrote: >> Hi Will, >> >> On 04/07/18 16:52, Will Deacon wrote: >>> On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: >>>> On 04/07/18 15:09, Will Deacon wrote: >>>>> On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >>>>>> Add an option to specify the physical address size used by this >>>>>> VM. >>>>>> >>>>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >>>>>> --- >>>>>> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >>>>>> arm/include/arm-common/kvm-config-arch.h | 1 + >>>>>> 2 files changed, 5 insertions(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>> index 04be43d..dabd22c 100644 >>>>>> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>> @@ -8,7 +8,10 @@ >>>>>> "Create PMUv3 device"), \ >>>>>> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >>>>>> "Specify random seed for Kernel Address Space " \ >>>>>> - "Layout Randomization (KASLR)"), >>>>>> + "Layout Randomization (KASLR)"), \ >>>>>> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >>>>>> + "Specify maximum physical address size (not " \ >>>>>> + "the amount of memory)"), >>>>> >>>>> Given that this is a shift value, I think the help message could be more >>>>> informative. Something like: >>>>> >>>>> "Specify maximum number of bits in a guest physical address" >>>>> >>>>> I think I'd actually leave out any mention of memory, because this does >>>>> actually have an effect on the amount of addressable memory in a way that I >>>>> don't think we want to describe in half of a usage message line :) >>>> Is there any particular reasons to expose this option to the user? >>>> >>>> I have recently sent a series to allow the user to specify the position >>>> of the RAM [1]. With that series in mind, I think the user would not really >>>> need to specify the maximum physical shift. Instead we could automatically >>>> find it. >>> >>> Marc makes a good point that it doesn't help for MMIO regions, so I'm trying >>> to understand whether we can do something differently there and avoid >>> sacrificing the type parameter. >> >> I am not sure to understand this. kvmtools knows the memory layout >> (including MMIOs) of the guest, so couldn't it guess the maximum >> physical shift for that? > > That's exactly what Will was trying to avoid, by having KVM to compute > the size of the IPA space based on the registered memslots. We've now > established that it doesn't work, so what we need to define is: > > - whether we need another ioctl(), or do we carry on piggy-backing on > the CPU type, kvm type I guess > - assuming the latter, whether we can reduce the number of bits used in > the ioctl parameter by subtly encoding the IPA size. Getting benefit from your Freudian slip, how should guest CPU PARange and maximum number of bits in a guest physical address relate? My understanding is they are not correlated at the moment and our guest PARange is fixed at the moment. But shouldn't they? On Intel there is qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,phys-bits=36 or qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,host-phys-bits=true where phys-bits, as far as I understand has a a similar semantics as the PARange. Thanks Eric > > Thanks, > > M. >
On 05/07/18 14:46, Auger Eric wrote: > Hi Marc, > > On 07/05/2018 03:20 PM, Marc Zyngier wrote: >> On 05/07/18 13:47, Julien Grall wrote: >>> Hi Will, >>> >>> On 04/07/18 16:52, Will Deacon wrote: >>>> On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: >>>>> On 04/07/18 15:09, Will Deacon wrote: >>>>>> On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >>>>>>> Add an option to specify the physical address size used by this >>>>>>> VM. >>>>>>> >>>>>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >>>>>>> --- >>>>>>> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >>>>>>> arm/include/arm-common/kvm-config-arch.h | 1 + >>>>>>> 2 files changed, 5 insertions(+), 1 deletion(-) >>>>>>> >>>>>>> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>> index 04be43d..dabd22c 100644 >>>>>>> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>> @@ -8,7 +8,10 @@ >>>>>>> "Create PMUv3 device"), \ >>>>>>> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >>>>>>> "Specify random seed for Kernel Address Space " \ >>>>>>> - "Layout Randomization (KASLR)"), >>>>>>> + "Layout Randomization (KASLR)"), \ >>>>>>> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >>>>>>> + "Specify maximum physical address size (not " \ >>>>>>> + "the amount of memory)"), >>>>>> >>>>>> Given that this is a shift value, I think the help message could be more >>>>>> informative. Something like: >>>>>> >>>>>> "Specify maximum number of bits in a guest physical address" >>>>>> >>>>>> I think I'd actually leave out any mention of memory, because this does >>>>>> actually have an effect on the amount of addressable memory in a way that I >>>>>> don't think we want to describe in half of a usage message line :) >>>>> Is there any particular reasons to expose this option to the user? >>>>> >>>>> I have recently sent a series to allow the user to specify the position >>>>> of the RAM [1]. With that series in mind, I think the user would not really >>>>> need to specify the maximum physical shift. Instead we could automatically >>>>> find it. >>>> >>>> Marc makes a good point that it doesn't help for MMIO regions, so I'm trying >>>> to understand whether we can do something differently there and avoid >>>> sacrificing the type parameter. >>> >>> I am not sure to understand this. kvmtools knows the memory layout >>> (including MMIOs) of the guest, so couldn't it guess the maximum >>> physical shift for that? >> >> That's exactly what Will was trying to avoid, by having KVM to compute >> the size of the IPA space based on the registered memslots. We've now >> established that it doesn't work, so what we need to define is: >> >> - whether we need another ioctl(), or do we carry on piggy-backing on >> the CPU type, > kvm type I guess machine type is more appropriate, going by the existing users. >> - assuming the latter, whether we can reduce the number of bits used in >> the ioctl parameter by subtly encoding the IPA size. > Getting benefit from your Freudian slip, how should guest CPU PARange > and maximum number of bits in a guest physical address relate? > > My understanding is they are not correlated at the moment and our guest > PARange is fixed at the moment. But shouldn't they? > > On Intel there is > qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,phys-bits=36 > or > qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,host-phys-bits=true > > where phys-bits, as far as I understand has a a similar semantics as the > PARange. AFAIT, PARange tells you the maximum (I)Physcial Address that can be handled by the CPU. But your IPA limit tells you where the guest RAM is placed. So they need not be the same. e.g, on Juno, A57's have a PARange of 42 if I am not wrong (but definitely > 40), while A53's have it at 40 and the system RAM is at 40bits. So, if we were to only use the A57s on Juno, we could run a KVM instance with 42 bits IPA or anything lower. So, PARange can be inferred as the maximum limit of the CPU's capability while the IPA is where the RAM is placed for a given system. One could keep them in sync for a VM by emulating, but then nobody uses the PARange, except the KVM. The other problem with capping PARange in the VM to IPA is restricting the IPA size of a nested VM. So, I don't think this is really beneficial. Cheers Suzuki > > Thanks > > Eric >> >> Thanks, >> >> M. >>
Hi Eric, On 05/07/18 14:46, Auger Eric wrote: > Hi Marc, > > On 07/05/2018 03:20 PM, Marc Zyngier wrote: >> On 05/07/18 13:47, Julien Grall wrote: >>> Hi Will, >>> >>> On 04/07/18 16:52, Will Deacon wrote: >>>> On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: >>>>> On 04/07/18 15:09, Will Deacon wrote: >>>>>> On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >>>>>>> Add an option to specify the physical address size used by this >>>>>>> VM. >>>>>>> >>>>>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >>>>>>> --- >>>>>>> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >>>>>>> arm/include/arm-common/kvm-config-arch.h | 1 + >>>>>>> 2 files changed, 5 insertions(+), 1 deletion(-) >>>>>>> >>>>>>> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>> index 04be43d..dabd22c 100644 >>>>>>> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>> @@ -8,7 +8,10 @@ >>>>>>> "Create PMUv3 device"), \ >>>>>>> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >>>>>>> "Specify random seed for Kernel Address Space " \ >>>>>>> - "Layout Randomization (KASLR)"), >>>>>>> + "Layout Randomization (KASLR)"), \ >>>>>>> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >>>>>>> + "Specify maximum physical address size (not " \ >>>>>>> + "the amount of memory)"), >>>>>> >>>>>> Given that this is a shift value, I think the help message could be more >>>>>> informative. Something like: >>>>>> >>>>>> "Specify maximum number of bits in a guest physical address" >>>>>> >>>>>> I think I'd actually leave out any mention of memory, because this does >>>>>> actually have an effect on the amount of addressable memory in a way that I >>>>>> don't think we want to describe in half of a usage message line :) >>>>> Is there any particular reasons to expose this option to the user? >>>>> >>>>> I have recently sent a series to allow the user to specify the position >>>>> of the RAM [1]. With that series in mind, I think the user would not really >>>>> need to specify the maximum physical shift. Instead we could automatically >>>>> find it. >>>> >>>> Marc makes a good point that it doesn't help for MMIO regions, so I'm trying >>>> to understand whether we can do something differently there and avoid >>>> sacrificing the type parameter. >>> >>> I am not sure to understand this. kvmtools knows the memory layout >>> (including MMIOs) of the guest, so couldn't it guess the maximum >>> physical shift for that? >> >> That's exactly what Will was trying to avoid, by having KVM to compute >> the size of the IPA space based on the registered memslots. We've now >> established that it doesn't work, so what we need to define is: >> >> - whether we need another ioctl(), or do we carry on piggy-backing on >> the CPU type, > kvm type I guess I really meant target here. Whatever you pass as a "-cpu" on your QEMU command line. >> - assuming the latter, whether we can reduce the number of bits used in >> the ioctl parameter by subtly encoding the IPA size. > Getting benefit from your Freudian slip, how should guest CPU PARange > and maximum number of bits in a guest physical address relate? Freudian? I'm not on the sofa yet... ;-) > My understanding is they are not correlated at the moment and our guest > PARange is fixed at the moment. But shouldn't they? > > On Intel there is > qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,phys-bits=36 > or > qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,host-phys-bits=true > > where phys-bits, as far as I understand has a a similar semantics as the > PARange. I think there is value in having it global, just like on x86. We don't really support heterogeneous guests anyway. Independently, we should also repaint/satinize PARange so that the guest observes the same thing, no matter what CPU it runs on (an A53/A57 system could be confusing in that respect). Thanks, M.
Hi Suzuki, Marc, On 07/05/2018 04:15 PM, Marc Zyngier wrote: > Hi Eric, > > On 05/07/18 14:46, Auger Eric wrote: >> Hi Marc, >> >> On 07/05/2018 03:20 PM, Marc Zyngier wrote: >>> On 05/07/18 13:47, Julien Grall wrote: >>>> Hi Will, >>>> >>>> On 04/07/18 16:52, Will Deacon wrote: >>>>> On Wed, Jul 04, 2018 at 04:00:11PM +0100, Julien Grall wrote: >>>>>> On 04/07/18 15:09, Will Deacon wrote: >>>>>>> On Fri, Jun 29, 2018 at 12:15:42PM +0100, Suzuki K Poulose wrote: >>>>>>>> Add an option to specify the physical address size used by this >>>>>>>> VM. >>>>>>>> >>>>>>>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> >>>>>>>> --- >>>>>>>> arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- >>>>>>>> arm/include/arm-common/kvm-config-arch.h | 1 + >>>>>>>> 2 files changed, 5 insertions(+), 1 deletion(-) >>>>>>>> >>>>>>>> diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>>> index 04be43d..dabd22c 100644 >>>>>>>> --- a/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>>> +++ b/arm/aarch64/include/kvm/kvm-config-arch.h >>>>>>>> @@ -8,7 +8,10 @@ >>>>>>>> "Create PMUv3 device"), \ >>>>>>>> OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ >>>>>>>> "Specify random seed for Kernel Address Space " \ >>>>>>>> - "Layout Randomization (KASLR)"), >>>>>>>> + "Layout Randomization (KASLR)"), \ >>>>>>>> + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ >>>>>>>> + "Specify maximum physical address size (not " \ >>>>>>>> + "the amount of memory)"), >>>>>>> >>>>>>> Given that this is a shift value, I think the help message could be more >>>>>>> informative. Something like: >>>>>>> >>>>>>> "Specify maximum number of bits in a guest physical address" >>>>>>> >>>>>>> I think I'd actually leave out any mention of memory, because this does >>>>>>> actually have an effect on the amount of addressable memory in a way that I >>>>>>> don't think we want to describe in half of a usage message line :) >>>>>> Is there any particular reasons to expose this option to the user? >>>>>> >>>>>> I have recently sent a series to allow the user to specify the position >>>>>> of the RAM [1]. With that series in mind, I think the user would not really >>>>>> need to specify the maximum physical shift. Instead we could automatically >>>>>> find it. >>>>> >>>>> Marc makes a good point that it doesn't help for MMIO regions, so I'm trying >>>>> to understand whether we can do something differently there and avoid >>>>> sacrificing the type parameter. >>>> >>>> I am not sure to understand this. kvmtools knows the memory layout >>>> (including MMIOs) of the guest, so couldn't it guess the maximum >>>> physical shift for that? >>> >>> That's exactly what Will was trying to avoid, by having KVM to compute >>> the size of the IPA space based on the registered memslots. We've now >>> established that it doesn't work, so what we need to define is: >>> >>> - whether we need another ioctl(), or do we carry on piggy-backing on >>> the CPU type, >> kvm type I guess > > I really meant target here. Whatever you pass as a "-cpu" on your QEMU > command line. Oh OK. It was not a slip then ;-) > >>> - assuming the latter, whether we can reduce the number of bits used in >>> the ioctl parameter by subtly encoding the IPA size. >> Getting benefit from your Freudian slip, how should guest CPU PARange >> and maximum number of bits in a guest physical address relate? > > Freudian? I'm not on the sofa yet... ;-) > >> My understanding is they are not correlated at the moment and our guest >> PARange is fixed at the moment. But shouldn't they? >> >> On Intel there is >> qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,phys-bits=36 >> or >> qemu-system-x86_64 -M pc,accel=kvm -cpu SandyBridge,host-phys-bits=true >> >> where phys-bits, as far as I understand has a a similar semantics as the >> PARange. > > I think there is value in having it global, just like on x86. We don't > really support heterogeneous guests anyway. Assuming we would use such a ",phys-bits=n" cpu option, is my understanding correct that it would set both - guest CPU PARange an - maximum number of bits in a guest physical address to n? Thanks Eric > > Independently, we should also repaint/satinize PARange so that the guest > observes the same thing, no matter what CPU it runs on (an A53/A57 > system could be confusing in that respect). > > Thanks, > > M. >
diff --git a/arm/aarch64/include/kvm/kvm-config-arch.h b/arm/aarch64/include/kvm/kvm-config-arch.h index 04be43d..dabd22c 100644 --- a/arm/aarch64/include/kvm/kvm-config-arch.h +++ b/arm/aarch64/include/kvm/kvm-config-arch.h @@ -8,7 +8,10 @@ "Create PMUv3 device"), \ OPT_U64('\0', "kaslr-seed", &(cfg)->kaslr_seed, \ "Specify random seed for Kernel Address Space " \ - "Layout Randomization (KASLR)"), + "Layout Randomization (KASLR)"), \ + OPT_INTEGER('\0', "phys-shift", &(cfg)->phys_shift, \ + "Specify maximum physical address size (not " \ + "the amount of memory)"), #include "arm-common/kvm-config-arch.h" diff --git a/arm/include/arm-common/kvm-config-arch.h b/arm/include/arm-common/kvm-config-arch.h index 6a196f1..e0b531e 100644 --- a/arm/include/arm-common/kvm-config-arch.h +++ b/arm/include/arm-common/kvm-config-arch.h @@ -11,6 +11,7 @@ struct kvm_config_arch { bool has_pmuv3; u64 kaslr_seed; enum irqchip_type irqchip; + int phys_shift; }; int irqchip_parser(const struct option *opt, const char *arg, int unset);
Add an option to specify the physical address size used by this VM. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> --- arm/aarch64/include/kvm/kvm-config-arch.h | 5 ++++- arm/include/arm-common/kvm-config-arch.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)