diff mbox series

[v3,2/7] s390x/pci: rework PCI STORE

Message ID 1511388334-16347-3-git-send-email-pmorel@linux.vnet.ibm.com
State New
Headers show
Series s390x/pci: Improve zPCI to cover more cases | expand

Commit Message

Pierre Morel Nov. 22, 2017, 10:05 p.m. UTC 
Enhance the fault detection, correction of the fault reporting.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
---
 hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
 1 file changed, 22 insertions(+), 17 deletions(-)

Comments

Thomas Huth Nov. 23, 2017, 9:01 a.m. UTC | #1 
On 22.11.2017 23:05, Pierre Morel wrote:
> Enhance the fault detection, correction of the fault reporting.
> 
> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
> ---
>  hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
>  1 file changed, 22 insertions(+), 17 deletions(-)
> 
> diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
> index 3e1f1a0..930c197 100644
> --- a/hw/s390x/s390-pci-inst.c
> +++ b/hw/s390x/s390-pci-inst.c
> @@ -470,6 +470,12 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>      pcias = (env->regs[r2] >> 16) & 0xf;
>      len = env->regs[r2] & 0xf;
>      offset = env->regs[r2 + 1];
> +    data = env->regs[r1];
> +
> +    if (!(fh & FH_MASK_ENABLE)) {
> +        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> +        return 0;
> +    }
>  
>      pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
>      if (!pbdev) {
> @@ -479,12 +485,7 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>      }
>  
>      switch (pbdev->state) {
> -    case ZPCI_FS_RESERVED:
> -    case ZPCI_FS_STANDBY:
> -    case ZPCI_FS_DISABLED:
>      case ZPCI_FS_PERMANENT_ERROR:
> -        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> -        return 0;
>      case ZPCI_FS_ERROR:
>          setcc(cpu, ZPCI_PCI_LS_ERR);
>          s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);

-EMISSINGPUBLICDOCUMENTATION

> @@ -493,9 +494,13 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>          break;
>      }
>  
> -    data = env->regs[r1];
> -    if (pcias < 6) {
> -        if ((8 - (offset & 0x7)) < len) {
> +    switch (pcias) {
> +        /* A ZPCI PCI card may use any BAR from BAR 0 to BAR 5 */
> +    case 0 ... 5:
> +        /* Check length:
> +         * A length of 0 is invalid and length should not cross a double word
> +         */
> +        if (!len || (len > (8 - (offset & 0x7)))) {
>              program_interrupt(env, PGM_OPERAND, 4);
>              return 0;
>          }
> @@ -513,21 +518,21 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>              program_interrupt(env, PGM_OPERAND, 4);
>              return 0;
>          }
> -    } else if (pcias == 15) {
> -        if ((4 - (offset & 0x3)) < len) {
> -            program_interrupt(env, PGM_OPERAND, 4);
> -            return 0;
> -        }
> -
> -        if (zpci_endian_swap(&data, len)) {
> +        break;
> +    case 15:
> +        /* ZPCI uses the pseudo BAR number 15 as configuration space */
> +        /* possible access lengths are 1,2,4 and must not cross a word */
> +        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
>              program_interrupt(env, PGM_OPERAND, 4);
>              return 0;
>          }
> -
> +        /* len = 1,2,4 so we do not need to test */
> +        zpci_endian_swap(&data, len);
>          pci_host_config_write_common(pbdev->pdev, offset,
>                                       pci_config_size(pbdev->pdev),
>                                       data, len);
> -    } else {
> +        break;
> +    default:
>          DPRINTF("pcistg invalid space\n");
>          setcc(cpu, ZPCI_PCI_LS_ERR);
>          s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);
> 

At least the last two hunks looks fine to me. If you want to have a
Reviewed-by for this, you could maybe put these two hunks into a
separate patch instead?

 Thomas
Cornelia Huck Nov. 23, 2017, 9:54 a.m. UTC | #2 
On Wed, 22 Nov 2017 23:05:29 +0100
Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:

> Enhance the fault detection, correction of the fault reporting.
> 
> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
> ---
>  hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
>  1 file changed, 22 insertions(+), 17 deletions(-)
> 
> diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
> index 3e1f1a0..930c197 100644
> --- a/hw/s390x/s390-pci-inst.c
> +++ b/hw/s390x/s390-pci-inst.c
> @@ -470,6 +470,12 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>      pcias = (env->regs[r2] >> 16) & 0xf;
>      len = env->regs[r2] & 0xf;
>      offset = env->regs[r2 + 1];
> +    data = env->regs[r1];
> +
> +    if (!(fh & FH_MASK_ENABLE)) {
> +        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> +        return 0;
> +    }
>  
>      pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
>      if (!pbdev) {
> @@ -479,12 +485,7 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>      }
>  
>      switch (pbdev->state) {
> -    case ZPCI_FS_RESERVED:
> -    case ZPCI_FS_STANDBY:
> -    case ZPCI_FS_DISABLED:
>      case ZPCI_FS_PERMANENT_ERROR:
> -        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> -        return 0;

Maybe add a comment that the remaining states are already covered by
the FH_MASK_ENABLE check above?

>      case ZPCI_FS_ERROR:
>          setcc(cpu, ZPCI_PCI_LS_ERR);
>          s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
> @@ -493,9 +494,13 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>          break;
>      }
>  
> -    data = env->regs[r1];
> -    if (pcias < 6) {
> -        if ((8 - (offset & 0x7)) < len) {
> +    switch (pcias) {
> +        /* A ZPCI PCI card may use any BAR from BAR 0 to BAR 5 */
> +    case 0 ... 5:

Hm... I'd still prefer speaking #defines here.

> +        /* Check length:
> +         * A length of 0 is invalid and length should not cross a double word
> +         */
> +        if (!len || (len > (8 - (offset & 0x7)))) {
>              program_interrupt(env, PGM_OPERAND, 4);
>              return 0;
>          }
> @@ -513,21 +518,21 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>              program_interrupt(env, PGM_OPERAND, 4);
>              return 0;
>          }
> -    } else if (pcias == 15) {
> -        if ((4 - (offset & 0x3)) < len) {
> -            program_interrupt(env, PGM_OPERAND, 4);
> -            return 0;
> -        }
> -
> -        if (zpci_endian_swap(&data, len)) {
> +        break;
> +    case 15:

And here.

> +        /* ZPCI uses the pseudo BAR number 15 as configuration space */
> +        /* possible access lengths are 1,2,4 and must not cross a word */
> +        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
>              program_interrupt(env, PGM_OPERAND, 4);
>              return 0;
>          }
> -
> +        /* len = 1,2,4 so we do not need to test */
> +        zpci_endian_swap(&data, len);
>          pci_host_config_write_common(pbdev->pdev, offset,
>                                       pci_config_size(pbdev->pdev),
>                                       data, len);
> -    } else {
> +        break;
> +    default:
>          DPRINTF("pcistg invalid space\n");
>          setcc(cpu, ZPCI_PCI_LS_ERR);
>          s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);
Pierre Morel Nov. 25, 2017, 10:37 a.m. UTC | #3 
On 23/11/2017 10:54, Cornelia Huck wrote:
> On Wed, 22 Nov 2017 23:05:29 +0100
> Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:
> 
>> Enhance the fault detection, correction of the fault reporting.
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
>> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
>> ---
>>   hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
>>   1 file changed, 22 insertions(+), 17 deletions(-)
>>
>> diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
>> index 3e1f1a0..930c197 100644
>> --- a/hw/s390x/s390-pci-inst.c
>> +++ b/hw/s390x/s390-pci-inst.c
>> @@ -470,6 +470,12 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>       pcias = (env->regs[r2] >> 16) & 0xf;
>>       len = env->regs[r2] & 0xf;
>>       offset = env->regs[r2 + 1];
>> +    data = env->regs[r1];
>> +
>> +    if (!(fh & FH_MASK_ENABLE)) {
>> +        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
>> +        return 0;
>> +    }
>>   
>>       pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
>>       if (!pbdev) {
>> @@ -479,12 +485,7 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>       }
>>   
>>       switch (pbdev->state) {
>> -    case ZPCI_FS_RESERVED:
>> -    case ZPCI_FS_STANDBY:
>> -    case ZPCI_FS_DISABLED:
>>       case ZPCI_FS_PERMANENT_ERROR:
>> -        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
>> -        return 0;
> 
> Maybe add a comment that the remaining states are already covered by
> the FH_MASK_ENABLE check above?

OK

> 
>>       case ZPCI_FS_ERROR:
>>           setcc(cpu, ZPCI_PCI_LS_ERR);
>>           s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
>> @@ -493,9 +494,13 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>           break;
>>       }
>>   
>> -    data = env->regs[r1];
>> -    if (pcias < 6) {
>> -        if ((8 - (offset & 0x7)) < len) {
>> +    switch (pcias) {
>> +        /* A ZPCI PCI card may use any BAR from BAR 0 to BAR 5 */
>> +    case 0 ... 5:
> 
> Hm... I'd still prefer speaking #defines here.

OK, sorry, I misunderstood your previous comment

> 
>> +        /* Check length:
>> +         * A length of 0 is invalid and length should not cross a double word
>> +         */
>> +        if (!len || (len > (8 - (offset & 0x7)))) {
>>               program_interrupt(env, PGM_OPERAND, 4);
>>               return 0;
>>           }
>> @@ -513,21 +518,21 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>               program_interrupt(env, PGM_OPERAND, 4);
>>               return 0;
>>           }
>> -    } else if (pcias == 15) {
>> -        if ((4 - (offset & 0x3)) < len) {
>> -            program_interrupt(env, PGM_OPERAND, 4);
>> -            return 0;
>> -        }
>> -
>> -        if (zpci_endian_swap(&data, len)) {
>> +        break;
>> +    case 15:
> 
> And here.
> 
>> +        /* ZPCI uses the pseudo BAR number 15 as configuration space */
>> +        /* possible access lengths are 1,2,4 and must not cross a word */
>> +        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
>>               program_interrupt(env, PGM_OPERAND, 4);
>>               return 0;
>>           }
>> -
>> +        /* len = 1,2,4 so we do not need to test */
>> +        zpci_endian_swap(&data, len);
>>           pci_host_config_write_common(pbdev->pdev, offset,
>>                                        pci_config_size(pbdev->pdev),
>>                                        data, len);
>> -    } else {
>> +        break;
>> +    default:
>>           DPRINTF("pcistg invalid space\n");
>>           setcc(cpu, ZPCI_PCI_LS_ERR);
>>           s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);
>
Pierre Morel Nov. 25, 2017, 10:39 a.m. UTC | #4 
On 23/11/2017 10:01, Thomas Huth wrote:
> On 22.11.2017 23:05, Pierre Morel wrote:
>> Enhance the fault detection, correction of the fault reporting.
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
>> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
>> ---
>>   hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
>>   1 file changed, 22 insertions(+), 17 deletions(-)
>>
>> diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
>> index 3e1f1a0..930c197 100644
>> --- a/hw/s390x/s390-pci-inst.c
>> +++ b/hw/s390x/s390-pci-inst.c
>> @@ -470,6 +470,12 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>       pcias = (env->regs[r2] >> 16) & 0xf;
>>       len = env->regs[r2] & 0xf;
>>       offset = env->regs[r2 + 1];
>> +    data = env->regs[r1];
>> +
>> +    if (!(fh & FH_MASK_ENABLE)) {
>> +        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
>> +        return 0;
>> +    }
>>   
>>       pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
>>       if (!pbdev) {
>> @@ -479,12 +485,7 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>       }
>>   
>>       switch (pbdev->state) {
>> -    case ZPCI_FS_RESERVED:
>> -    case ZPCI_FS_STANDBY:
>> -    case ZPCI_FS_DISABLED:
>>       case ZPCI_FS_PERMANENT_ERROR:
>> -        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
>> -        return 0;
>>       case ZPCI_FS_ERROR:
>>           setcc(cpu, ZPCI_PCI_LS_ERR);
>>           s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
> 
> -EMISSINGPUBLICDOCUMENTATION

Hi Thomas,

I do not understand what you mean here

> 
>> @@ -493,9 +494,13 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>           break;
>>       }
>>   
>> -    data = env->regs[r1];
>> -    if (pcias < 6) {
>> -        if ((8 - (offset & 0x7)) < len) {
>> +    switch (pcias) {
>> +        /* A ZPCI PCI card may use any BAR from BAR 0 to BAR 5 */
>> +    case 0 ... 5:
>> +        /* Check length:
>> +         * A length of 0 is invalid and length should not cross a double word
>> +         */
>> +        if (!len || (len > (8 - (offset & 0x7)))) {
>>               program_interrupt(env, PGM_OPERAND, 4);
>>               return 0;
>>           }
>> @@ -513,21 +518,21 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
>>               program_interrupt(env, PGM_OPERAND, 4);
>>               return 0;
>>           }
>> -    } else if (pcias == 15) {
>> -        if ((4 - (offset & 0x3)) < len) {
>> -            program_interrupt(env, PGM_OPERAND, 4);
>> -            return 0;
>> -        }
>> -
>> -        if (zpci_endian_swap(&data, len)) {
>> +        break;
>> +    case 15:
>> +        /* ZPCI uses the pseudo BAR number 15 as configuration space */
>> +        /* possible access lengths are 1,2,4 and must not cross a word */
>> +        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
>>               program_interrupt(env, PGM_OPERAND, 4);
>>               return 0;
>>           }
>> -
>> +        /* len = 1,2,4 so we do not need to test */
>> +        zpci_endian_swap(&data, len);
>>           pci_host_config_write_common(pbdev->pdev, offset,
>>                                        pci_config_size(pbdev->pdev),
>>                                        data, len);
>> -    } else {
>> +        break;
>> +    default:
>>           DPRINTF("pcistg invalid space\n");
>>           setcc(cpu, ZPCI_PCI_LS_ERR);
>>           s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);
>>
> 
> At least the last two hunks looks fine to me. If you want to have a
> Reviewed-by for this, you could maybe put these two hunks into a
> separate patch instead?

I do not understand what yo umean with the first one.
Can you explain?

Thanks

Pierre

> 
>   Thomas
>
Thomas Huth Nov. 27, 2017, 6:45 a.m. UTC | #5 
On 25.11.2017 11:39, Pierre Morel wrote:
> On 23/11/2017 10:01, Thomas Huth wrote:
>> On 22.11.2017 23:05, Pierre Morel wrote:
>>> Enhance the fault detection, correction of the fault reporting.
>>>
>>> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
>>> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
>>> ---
>>>   hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
>>>   1 file changed, 22 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
>>> index 3e1f1a0..930c197 100644
>>> --- a/hw/s390x/s390-pci-inst.c
>>> +++ b/hw/s390x/s390-pci-inst.c
>>> @@ -470,6 +470,12 @@ int pcistg_service_call(S390CPU *cpu, uint8_t
>>> r1, uint8_t r2)
>>>       pcias = (env->regs[r2] >> 16) & 0xf;
>>>       len = env->regs[r2] & 0xf;
>>>       offset = env->regs[r2 + 1];
>>> +    data = env->regs[r1];
>>> +
>>> +    if (!(fh & FH_MASK_ENABLE)) {
>>> +        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
>>> +        return 0;
>>> +    }
>>>         pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
>>>       if (!pbdev) {
>>> @@ -479,12 +485,7 @@ int pcistg_service_call(S390CPU *cpu, uint8_t
>>> r1, uint8_t r2)
>>>       }
>>>         switch (pbdev->state) {
>>> -    case ZPCI_FS_RESERVED:
>>> -    case ZPCI_FS_STANDBY:
>>> -    case ZPCI_FS_DISABLED:
>>>       case ZPCI_FS_PERMANENT_ERROR:
>>> -        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
>>> -        return 0;
>>>       case ZPCI_FS_ERROR:
>>>           setcc(cpu, ZPCI_PCI_LS_ERR);
>>>           s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
>>
>> -EMISSINGPUBLICDOCUMENTATION
> 
> Hi Thomas,
> 
> I do not understand what you mean here

Not your fault, I just wanted to express that I can not really review
this part of the patch (and thus not provide a Reviewed-by) since there
is no public documentation available for zPCI :-(

 Thomas
diff mbox series

Patch

diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 3e1f1a0..930c197 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -470,6 +470,12 @@  int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
     pcias = (env->regs[r2] >> 16) & 0xf;
     len = env->regs[r2] & 0xf;
     offset = env->regs[r2 + 1];
+    data = env->regs[r1];
+
+    if (!(fh & FH_MASK_ENABLE)) {
+        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
+        return 0;
+    }
 
     pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
     if (!pbdev) {
@@ -479,12 +485,7 @@  int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
     }
 
     switch (pbdev->state) {
-    case ZPCI_FS_RESERVED:
-    case ZPCI_FS_STANDBY:
-    case ZPCI_FS_DISABLED:
     case ZPCI_FS_PERMANENT_ERROR:
-        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
-        return 0;
     case ZPCI_FS_ERROR:
         setcc(cpu, ZPCI_PCI_LS_ERR);
         s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
@@ -493,9 +494,13 @@  int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
         break;
     }
 
-    data = env->regs[r1];
-    if (pcias < 6) {
-        if ((8 - (offset & 0x7)) < len) {
+    switch (pcias) {
+        /* A ZPCI PCI card may use any BAR from BAR 0 to BAR 5 */
+    case 0 ... 5:
+        /* Check length:
+         * A length of 0 is invalid and length should not cross a double word
+         */
+        if (!len || (len > (8 - (offset & 0x7)))) {
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
@@ -513,21 +518,21 @@  int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
-    } else if (pcias == 15) {
-        if ((4 - (offset & 0x3)) < len) {
-            program_interrupt(env, PGM_OPERAND, 4);
-            return 0;
-        }
-
-        if (zpci_endian_swap(&data, len)) {
+        break;
+    case 15:
+        /* ZPCI uses the pseudo BAR number 15 as configuration space */
+        /* possible access lengths are 1,2,4 and must not cross a word */
+        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
-
+        /* len = 1,2,4 so we do not need to test */
+        zpci_endian_swap(&data, len);
         pci_host_config_write_common(pbdev->pdev, offset,
                                      pci_config_size(pbdev->pdev),
                                      data, len);
-    } else {
+        break;
+    default:
         DPRINTF("pcistg invalid space\n");
         setcc(cpu, ZPCI_PCI_LS_ERR);
         s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);