@@ -22,6 +22,7 @@ maintained as part of the virtio specification.
1af4:1004 SCSI host bus adapter device (legacy)
1af4:1005 entropy generator device (legacy)
1af4:1009 9p filesystem device (legacy)
+1af4:1014 crypto device (legacy)
1af4:1041 network device (modern)
1af4:1042 block device (modern)
@@ -32,6 +33,7 @@ maintained as part of the virtio specification.
1af4:1049 9p filesystem device (modern)
1af4:1050 virtio gpu device (modern)
1af4:1052 virtio input device (modern)
+1af4:1054 crypto device (modern)
1af4:10f0 Available for experimental usage without registration. Must get
to official ID when the code leaves the test lab (i.e. when seeking
@@ -37,7 +37,6 @@ static void virtio_crypto_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
}
qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
- virtio_pci_force_virtio_1(vpci_dev);
object_property_set_bool(OBJECT(vdev), true, "realized", errp);
object_property_set_link(OBJECT(vcrypto),
OBJECT(vcrypto->vdev.conf.cryptodev), "cryptodev",
@@ -53,6 +52,9 @@ static void virtio_crypto_pci_class_init(ObjectClass *klass, void *data)
k->realize = virtio_crypto_pci_realize;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
dc->props = virtio_crypto_pci_properties;
+ pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
+ pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_CRYPTO;
+ pcidev_k->revision = 0;
pcidev_k->class_id = PCI_CLASS_OTHERS;
}
@@ -83,6 +83,8 @@
#define PCI_DEVICE_ID_VIRTIO_RNG 0x1005
#define PCI_DEVICE_ID_VIRTIO_9P 0x1009
#define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012
+#define PCI_DEVICE_ID_VIRTIO_CRYPTO 0x1014
+
#define PCI_VENDOR_ID_REDHAT 0x1b36
#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001
@@ -168,6 +168,8 @@ check-qtest-virtio-y += tests/virtio-serial-test$(EXESUF)
gcov-files-virtio-y += i386-softmmu/hw/char/virtio-serial-bus.c
check-qtest-virtio-y += $(check-qtest-virtioserial-y)
gcov-files-virtio-y += $(gcov-files-virtioserial-y)
+check-qtest-virtio-y += tests/virtio-crypto-test$(EXESUF)
+gcov-files-virtio-y += i386-softmmu/hw/virtio/virtio-crypto.c
check-qtest-pci-y += tests/e1000-test$(EXESUF)
gcov-files-pci-y += hw/net/e1000.c
@@ -717,6 +719,7 @@ tests/virtio-scsi-test$(EXESUF): tests/virtio-scsi-test.o $(libqos-virtio-obj-y)
tests/virtio-9p-test$(EXESUF): tests/virtio-9p-test.o $(libqos-virtio-obj-y)
tests/virtio-serial-test$(EXESUF): tests/virtio-serial-test.o
tests/virtio-console-test$(EXESUF): tests/virtio-console-test.o
+tests/virtio-crypto-test$(EXESUF): tests/virtio-crypto-test.o $(libqos-virtio-obj-y)
tests/tpci200-test$(EXESUF): tests/tpci200-test.o
tests/display-vga-test$(EXESUF): tests/display-vga-test.o
tests/ipoctal232-test$(EXESUF): tests/ipoctal232-test.o
new file mode 100644
@@ -0,0 +1,596 @@
+/*
+ * QTest testcase for VirtIO Crypto Device
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+ *
+ * Authors:
+ * Gonglei <arei.gonglei@huawei.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include <stdlib.h>
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+#include "libqos/virtio.h"
+#include "libqos/virtio-pci.h"
+#include "libqos/virtio-mmio.h"
+#include "libqos/pci-pc.h"
+#include "libqos/malloc.h"
+#include "libqos/malloc-pc.h"
+#include "libqos/malloc-generic.h"
+#include "qemu/bswap.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+#include "standard-headers/linux/virtio_ring.h"
+#include "standard-headers/linux/virtio_crypto.h"
+#include "standard-headers/linux/virtio_pci.h"
+
+#define QVIRTIO_CRYPTO_TIMEOUT_US (30 * 1000 * 1000)
+
+#define PCI_SLOT_HP 0x06
+#define PCI_SLOT 0x04
+#define PCI_FN 0x00
+
+/*
+ * VirtIOCryptoCipherTestData: structure to describe a cipher test
+ * @key: A pointer to a key used by the test
+ * @key_len: The length of @key
+ * @iv: A pointer to the IV/Counter used by the test
+ * @iv_len: The length of @iv
+ * @input: A pointer to data used as input
+ * @ilen The length of data in @input
+ * @output: A pointer to what the test need to produce
+ * @olen: The length of data in @output
+ * @algo: The type of algorithm, refer to VIRTIO_CRYPTO_CIPHER_AES_*
+ */
+typedef struct VirtIOCryptoCipherTestData {
+ const char *path;
+ unsigned short algo;
+ const char *key;
+ const char *iv;
+ const char *input;
+ const char *output;
+ unsigned char key_len;
+ unsigned char iv_len;
+ unsigned short ilen;
+ unsigned short olen;
+ bool is_statelss_mode;
+} VirtIOCryptoCipherTestData;
+
+
+static VirtIOCryptoCipherTestData cipher_test_data[] = {
+ { /* From RFC 3602 */
+ .path = "/virtio/crypto/cbc(aes-128-session-mode)",
+ .algo = VIRTIO_CRYPTO_CIPHER_AES_CBC,
+ .key = "\x06\xa9\x21\x40\x36\xb8\xa1\x5b"
+ "\x51\x2e\x03\xd5\x34\x12\x00\x06",
+ .key_len = 16,
+ .iv = "\x3d\xaf\xba\x42\x9d\x9e\xb4\x30"
+ "\xb4\x22\xda\x80\x2c\x9f\xac\x41",
+ .iv_len = 16,
+ .input = "Single block msg",
+ .ilen = 16,
+ .output = "\xe3\x53\x77\x9c\x10\x79\xae\xb8"
+ "\x27\x08\x94\x2d\xbe\x77\x18\x1a",
+ .olen = 16,
+ .is_statelss_mode = false,
+ },
+ { /* From RFC 3602 */
+ .path = "/virtio/crypto/cbc(aes-128-stateless-mode)",
+ .algo = VIRTIO_CRYPTO_CIPHER_AES_CBC,
+ .key = "\x06\xa9\x21\x40\x36\xb8\xa1\x5b"
+ "\x51\x2e\x03\xd5\x34\x12\x00\x06",
+ .key_len = 16,
+ .iv = "\x3d\xaf\xba\x42\x9d\x9e\xb4\x30"
+ "\xb4\x22\xda\x80\x2c\x9f\xac\x41",
+ .iv_len = 16,
+ .input = "Single block msg",
+ .ilen = 16,
+ .output = "\xe3\x53\x77\x9c\x10\x79\xae\xb8"
+ "\x27\x08\x94\x2d\xbe\x77\x18\x1a",
+ .olen = 16,
+ .is_statelss_mode = true,
+ },
+};
+
+static QPCIBus *virtio_crypto_test_start(void)
+{
+ char *cmdline;
+
+ cmdline = g_strdup_printf(
+ "-object cryptodev-backend-builtin,id=cryptodev0 "
+ "-device virtio-crypto-pci,id=crypto0,"
+ "cryptodev=cryptodev0");
+
+ qtest_start(cmdline);
+ g_free(cmdline);
+
+ return qpci_init_pc(NULL);
+}
+
+static void test_end(void)
+{
+ qtest_end();
+}
+
+static QVirtioPCIDevice *virtio_crypto_pci_init(QPCIBus *bus, int slot)
+{
+ QVirtioPCIDevice *dev;
+
+ dev = qvirtio_pci_device_find(bus, VIRTIO_ID_CRYPTO);
+ g_assert(dev != NULL);
+ g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_CRYPTO);
+
+ qvirtio_pci_device_enable(dev);
+ qvirtio_reset(&dev->vdev);
+ qvirtio_set_acknowledge(&dev->vdev);
+ qvirtio_set_driver(&dev->vdev);
+
+ return dev;
+}
+
+static uint64_t
+virtio_crypto_ctrl_request(QGuestAllocator *alloc,
+ struct virtio_crypto_op_ctrl_req *req)
+{
+ uint64_t addr;
+
+ addr = guest_alloc(alloc, sizeof(*req));
+
+ memwrite(addr, req, sizeof(*req));
+
+ return addr;
+}
+
+static uint64_t
+virtio_crypto_data_request(QGuestAllocator *alloc,
+ struct virtio_crypto_op_data_req *req)
+{
+ uint64_t addr;
+
+ addr = guest_alloc(alloc, sizeof(*req));
+
+ memwrite(addr, req, sizeof(*req));
+
+ return addr;
+}
+
+static void
+virtio_crypto_driver_init(QVirtioDevice *dev)
+{
+ /* Read configure space to get supported crypto services */
+
+ qvirtio_set_driver_ok(dev);
+}
+
+static uint64_t
+virtio_crypto_create_session(QVirtioDevice *dev,
+ QGuestAllocator *alloc, QVirtQueue *vq,
+ VirtIOCryptoCipherTestData *data,
+ int encrypt)
+{
+ uint32_t free_head;
+ struct virtio_crypto_op_ctrl_req ctrl;
+ struct virtio_crypto_session_input input;
+ uint32_t key_len = data->key_len;
+ uint64_t req_addr;
+ uint64_t key_addr, input_addr; /* cipher key guest physical address */
+ uint64_t session_id;
+ QVRingIndirectDesc *indirect;
+
+ /* Create an encryption session */
+ ctrl.header.opcode = VIRTIO_CRYPTO_CIPHER_CREATE_SESSION;
+ ctrl.header.algo = data->algo;
+ /* Set the default dataqueue id to 0 */
+ ctrl.header.queue_id = 0;
+
+ /* Pad cipher's parameters */
+ ctrl.u.sym_create_session.op_type = VIRTIO_CRYPTO_SYM_OP_CIPHER;
+ ctrl.u.sym_create_session.u.cipher.para.algo = ctrl.header.algo;
+ ctrl.u.sym_create_session.u.cipher.para.keylen = key_len;
+ if (encrypt) {
+ ctrl.u.sym_create_session.u.cipher.para.op = VIRTIO_CRYPTO_OP_ENCRYPT;
+ } else {
+ ctrl.u.sym_create_session.u.cipher.para.op = VIRTIO_CRYPTO_OP_DECRYPT;
+ }
+
+ req_addr = virtio_crypto_ctrl_request(alloc, &ctrl);
+
+ /* Pad cipher's output data */
+ key_addr = guest_alloc(alloc, key_len);
+ memwrite(key_addr, data->key, key_len);
+
+ input.status = VIRTIO_CRYPTO_ERR;
+ input_addr = guest_alloc(alloc, sizeof(input));
+ memwrite(input_addr, &input, sizeof(input));
+
+ indirect = qvring_indirect_desc_setup(dev, alloc, 3);
+ qvring_indirect_desc_add(indirect, req_addr, sizeof(ctrl), false);
+ qvring_indirect_desc_add(indirect, key_addr, key_len, false);
+ qvring_indirect_desc_add(indirect, input_addr, sizeof(input), true);
+ free_head = qvirtqueue_add_indirect(vq, indirect);
+
+ qvirtqueue_kick(dev, vq, free_head);
+
+ qvirtio_wait_queue_isr(dev, vq, QVIRTIO_CRYPTO_TIMEOUT_US);
+
+ /* calculate the offset of input data */
+
+ memread(input_addr, &input, sizeof(input));
+
+ /* Verify the result */
+ g_assert_cmpint(input.status, ==, VIRTIO_CRYPTO_OK);
+
+ session_id = input.session_id;
+
+ g_free(indirect);
+ guest_free(alloc, input_addr);
+ guest_free(alloc, key_addr);
+ guest_free(alloc, req_addr);
+
+ return session_id;
+}
+
+static void
+virtio_crypto_close_session(QVirtioDevice *dev,
+ QGuestAllocator *alloc, QVirtQueue *vq,
+ uint64_t session_id)
+{
+ uint32_t free_head;
+ struct virtio_crypto_op_ctrl_req ctrl;
+ uint64_t req_addr, status_addr;
+ uint8_t status;
+ QVRingIndirectDesc *indirect;
+
+ /* Create an encryption session */
+ ctrl.header.opcode = VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION;
+ /* Set the default dataqueue id to 0 */
+ ctrl.header.queue_id = 0;
+
+ ctrl.u.destroy_session.session_id = session_id;
+
+ req_addr = virtio_crypto_ctrl_request(alloc, &ctrl);
+
+ status_addr = guest_alloc(alloc, sizeof(status));
+ writel(status_addr, VIRTIO_CRYPTO_ERR);
+
+ indirect = qvring_indirect_desc_setup(dev, alloc, 2);
+ qvring_indirect_desc_add(indirect, req_addr, sizeof(ctrl), false);
+ qvring_indirect_desc_add(indirect, status_addr, sizeof(status), true);
+ free_head = qvirtqueue_add_indirect(vq, indirect);
+
+ qvirtqueue_kick(dev, vq, free_head);
+
+ qvirtio_wait_queue_isr(dev, vq, QVIRTIO_CRYPTO_TIMEOUT_US);
+
+ /* Verify the result */
+ status = readl(status_addr);
+ g_assert_cmpint(status, ==, VIRTIO_CRYPTO_OK);
+
+ g_free(indirect);
+ guest_free(alloc, req_addr);
+ guest_free(alloc, status_addr);
+}
+
+
+static void
+virtio_crypto_test_cipher_session_mode(QVirtioDevice *dev,
+ QGuestAllocator *alloc, QVirtQueue *ctrlq,
+ QVirtQueue *vq, VirtIOCryptoCipherTestData *data,
+ int encrypt)
+{
+ uint32_t free_head;
+ struct virtio_crypto_op_data_req req;
+ uint64_t req_addr, status_addr;
+ uint64_t iv_addr = 0, src_addr, dst_addr;
+ uint64_t session_id;
+ char *output;
+ uint32_t src_len, dst_len;
+ uint8_t status;
+ QVRingIndirectDesc *indirect;
+ uint8_t entry_num;
+
+ /* Create a session */
+ session_id = virtio_crypto_create_session(dev, alloc,
+ ctrlq, data, encrypt);
+
+ /* Head of operation */
+ req.header.session_id = session_id;
+ if (encrypt) {
+ req.header.opcode = VIRTIO_CRYPTO_CIPHER_ENCRYPT;
+ } else {
+ req.header.opcode = VIRTIO_CRYPTO_CIPHER_DECRYPT;
+ }
+
+ req.u.sym_req.op_type = VIRTIO_CRYPTO_SYM_OP_CIPHER;
+ req.u.sym_req.u.cipher.para.iv_len = data->iv_len;
+ req.u.sym_req.u.cipher.para.src_data_len = data->ilen;
+ req.u.sym_req.u.cipher.para.dst_data_len = data->olen;
+
+ req_addr = virtio_crypto_data_request(alloc, &req);
+
+ /* IV */
+ if (data->iv_len > 0) {
+ iv_addr = guest_alloc(alloc, data->iv_len);
+ memwrite(iv_addr, data->iv, data->iv_len);
+
+ /* header + iv + src + dst + status */
+ entry_num = 5;
+ } else {
+ /* header + src + dst + status */
+ entry_num = 4;
+ }
+
+ if (encrypt) {
+ src_len = data->ilen;
+ dst_len = data->olen;
+ /* Source data is the input data which is a single buffer */
+ src_addr = guest_alloc(alloc, src_len);
+ memwrite(src_addr, data->input, src_len);
+ } else {
+ src_len = data->olen;
+ dst_len = data->ilen;
+ /* Source data is the output data which is a single buffer */
+ src_addr = guest_alloc(alloc, src_len);
+ memwrite(src_addr, data->output, src_len);
+ }
+
+ dst_addr = guest_alloc(alloc, dst_len);
+
+ status_addr = guest_alloc(alloc, sizeof(status));
+ writel(status_addr, VIRTIO_CRYPTO_ERR);
+
+ /* Allocate descripto table entries */
+ indirect = qvring_indirect_desc_setup(dev, alloc, entry_num);
+ qvring_indirect_desc_add(indirect, req_addr, sizeof(req), false);
+ if (data->iv_len > 0) {
+ qvring_indirect_desc_add(indirect, iv_addr, data->iv_len, false);
+ }
+ qvring_indirect_desc_add(indirect, src_addr, src_len, false);
+ qvring_indirect_desc_add(indirect, dst_addr, dst_len, true);
+ qvring_indirect_desc_add(indirect, status_addr, sizeof(status), true);
+ free_head = qvirtqueue_add_indirect(vq, indirect);
+
+ qvirtqueue_kick(dev, vq, free_head);
+
+ qvirtio_wait_queue_isr(dev, vq, QVIRTIO_CRYPTO_TIMEOUT_US);
+
+ /* Verify the result */
+ status = readl(status_addr);
+ g_assert_cmpint(status, ==, VIRTIO_CRYPTO_OK);
+
+ output = g_malloc0(dst_len);
+ memread(dst_addr, output, dst_len);
+ if (encrypt) {
+ g_assert_cmpstr(output, ==, data->output);
+ } else {
+ g_assert_cmpstr(output, ==, data->input);
+ }
+ g_free(output);
+
+ g_free(indirect);
+
+ if (data->iv_len > 0) {
+ guest_free(alloc, iv_addr);
+ }
+ guest_free(alloc, src_addr);
+ guest_free(alloc, dst_addr);
+ guest_free(alloc, req_addr);
+ guest_free(alloc, status_addr);
+
+ /* Close the session */
+ virtio_crypto_close_session(dev, alloc, ctrlq, session_id);
+}
+
+static void
+virtio_crypto_test_cipher_stateless_mode(QVirtioDevice *dev,
+ QGuestAllocator *alloc,
+ QVirtQueue *vq, VirtIOCryptoCipherTestData *data,
+ int encrypt)
+{
+ uint32_t free_head;
+ struct virtio_crypto_op_data_req_mux req;
+ uint64_t req_addr, status_addr;
+ uint64_t iv_addr = 0, src_addr, dst_addr, key_addr;
+ char *output;
+ uint32_t src_len, dst_len;
+ uint8_t status;
+ QVRingIndirectDesc *indirect;
+ uint8_t entry_num;
+
+ /* Head of operation */
+ req.header.flag = VIRTIO_CRYPTO_FLAG_STATELESS_MODE;
+ if (encrypt) {
+ req.header.opcode = VIRTIO_CRYPTO_CIPHER_ENCRYPT;
+ req.u.sym_stateless_req.u.cipher.para.sess_para.op =
+ VIRTIO_CRYPTO_OP_ENCRYPT;
+ } else {
+ req.header.opcode = VIRTIO_CRYPTO_CIPHER_DECRYPT;
+ req.u.sym_stateless_req.u.cipher.para.sess_para.op =
+ VIRTIO_CRYPTO_OP_DECRYPT;
+ }
+
+ req.u.sym_stateless_req.op_type = VIRTIO_CRYPTO_SYM_OP_CIPHER;
+ req.u.sym_stateless_req.u.cipher.para.sess_para.algo = data->algo;
+ req.u.sym_stateless_req.u.cipher.para.sess_para.keylen = data->key_len;
+ req.u.sym_stateless_req.u.cipher.para.iv_len = data->iv_len;
+ req.u.sym_stateless_req.u.cipher.para.src_data_len = data->ilen;
+ req.u.sym_stateless_req.u.cipher.para.dst_data_len = data->olen;
+
+ req_addr = guest_alloc(alloc, sizeof(req));
+ memwrite(req_addr, &req, sizeof(req));
+
+ g_assert(data->key_len > 0);
+ key_addr = guest_alloc(alloc, data->key_len);
+ memwrite(key_addr, data->key, data->key_len);
+
+ /* IV */
+ if (data->iv_len > 0) {
+ iv_addr = guest_alloc(alloc, data->iv_len);
+ memwrite(iv_addr, data->iv, data->iv_len);
+
+ /* header + key + iv + src + dst + status */
+ entry_num = 6;
+ } else {
+ /* header + key + src + dst + status */
+ entry_num = 5;
+ }
+
+ if (encrypt) {
+ src_len = data->ilen;
+ dst_len = data->olen;
+ /* Source data is the input data which is a single buffer */
+ src_addr = guest_alloc(alloc, src_len);
+ memwrite(src_addr, data->input, src_len);
+ } else {
+ src_len = data->olen;
+ dst_len = data->ilen;
+ /* Source data is the output data which is a single buffer */
+ src_addr = guest_alloc(alloc, src_len);
+ memwrite(src_addr, data->output, src_len);
+ }
+
+ dst_addr = guest_alloc(alloc, dst_len);
+
+ status_addr = guest_alloc(alloc, sizeof(status));
+ writel(status_addr, VIRTIO_CRYPTO_ERR);
+
+ /* Allocate desc table entries */
+ indirect = qvring_indirect_desc_setup(dev, alloc, entry_num);
+ qvring_indirect_desc_add(indirect, req_addr, sizeof(req), false);
+ qvring_indirect_desc_add(indirect, key_addr, data->key_len, false);
+ if (data->iv_len > 0) {
+ qvring_indirect_desc_add(indirect, iv_addr, data->iv_len, false);
+ }
+ qvring_indirect_desc_add(indirect, src_addr, src_len, false);
+ qvring_indirect_desc_add(indirect, dst_addr, dst_len, true);
+ qvring_indirect_desc_add(indirect, status_addr, sizeof(status), true);
+ free_head = qvirtqueue_add_indirect(vq, indirect);
+
+ qvirtqueue_kick(dev, vq, free_head);
+
+ qvirtio_wait_queue_isr(dev, vq, QVIRTIO_CRYPTO_TIMEOUT_US);
+
+ /* Verify the result */
+ status = readl(status_addr);
+ g_assert_cmpint(status, ==, VIRTIO_CRYPTO_OK);
+
+ output = g_malloc0(dst_len);
+ memread(dst_addr, output, dst_len);
+ if (encrypt) {
+ g_assert_cmpstr(output, ==, data->output);
+ } else {
+ g_assert_cmpstr(output, ==, data->input);
+ }
+ g_free(output);
+
+ g_free(indirect);
+ guest_free(alloc, key_addr);
+ if (data->iv_len > 0) {
+ guest_free(alloc, iv_addr);
+ }
+ guest_free(alloc, src_addr);
+ guest_free(alloc, dst_addr);
+ guest_free(alloc, req_addr);
+ guest_free(alloc, status_addr);
+}
+
+static void
+virtio_crypto_test_cipher(QVirtioDevice *dev,
+ QGuestAllocator *alloc, QVirtQueue *ctrlq,
+ QVirtQueue *dataq, VirtIOCryptoCipherTestData *data,
+ int encrypt)
+{
+ if (!data->is_statelss_mode) {
+ virtio_crypto_test_cipher_session_mode(dev, alloc,
+ ctrlq, dataq, data, encrypt);
+ } else {
+ virtio_crypto_test_cipher_stateless_mode(dev, alloc,
+ dataq, data, encrypt);
+ }
+}
+
+static void virtio_crypto_pci_basic(void *opaque)
+{
+ VirtIOCryptoCipherTestData *test_data = opaque;
+ QVirtioPCIDevice *dev;
+ QPCIBus *bus;
+ QGuestAllocator *alloc;
+ QVirtQueuePCI *dataq, *controlq;
+ uint32_t features;
+
+ bus = virtio_crypto_test_start();
+ dev = virtio_crypto_pci_init(bus, PCI_SLOT);
+
+ alloc = pc_alloc_init();
+
+ features = qvirtio_get_features(&dev->vdev);
+ g_assert_cmphex(features & (1u << VIRTIO_RING_F_INDIRECT_DESC), !=, 0);
+
+ if (!test_data->is_statelss_mode) {
+ features = features & ~(QVIRTIO_F_BAD_FEATURE |
+ (1u << VIRTIO_RING_F_EVENT_IDX |
+ 1u << VIRTIO_CRYPTO_F_MUX_MODE |
+ 1u << VIRTIO_CRYPTO_F_CIPHER_STATELESS_MODE));
+ } else {
+ features = features & ~(QVIRTIO_F_BAD_FEATURE |
+ (1u << VIRTIO_RING_F_EVENT_IDX));
+ }
+ qvirtio_set_features(&dev->vdev, features);
+
+ dataq = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev,
+ alloc, 0);
+ controlq = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev,
+ alloc, 1);
+
+ virtio_crypto_driver_init(&dev->vdev);
+
+ /* Step 1: Encryption */
+ virtio_crypto_test_cipher(&dev->vdev, alloc,
+ &controlq->vq, &dataq->vq,
+ test_data, 1);
+ /* Step 2: Decryption */
+ virtio_crypto_test_cipher(&dev->vdev, alloc,
+ &controlq->vq, &dataq->vq,
+ test_data, 0);
+
+ /* End test */
+ guest_free(alloc, dataq->vq.desc);
+ guest_free(alloc, controlq->vq.desc);
+ pc_alloc_uninit(alloc);
+ qvirtio_pci_device_disable(dev);
+ g_free(dev);
+ qpci_free_pc(bus);
+ test_end();
+}
+
+int main(int argc, char **argv)
+{
+ const char *qemu;
+ const char *arch;
+ int i, ret;
+
+ qemu = getenv("QTEST_QEMU_BINARY");
+ if (qemu == NULL) {
+ ret = setenv("QTEST_QEMU_BINARY",
+ "x86_64-softmmu/qemu-system-x86_64", 0);
+ g_assert(ret == 0);
+ }
+
+ arch = qtest_get_arch();
+
+ g_test_init(&argc, &argv, NULL);
+
+ if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+ for (i = 0; i < G_N_ELEMENTS(cipher_test_data); i++) {
+ g_test_add_data_func(cipher_test_data[i].path,
+ (void *)&cipher_test_data[i],
+ (GTestDataFunc)virtio_crypto_pci_basic);
+ }
+ }
+
+ return g_test_run();
+}