@@ -4,6 +4,7 @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o
common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o
common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o
+common-obj-$(CONFIG_MSF2) += msf2_spi.o
obj-$(CONFIG_OMAP) += omap_spi.o
obj-$(CONFIG_IMX) += imx_spi.o
new file mode 100644
@@ -0,0 +1,449 @@
+/*
+ * SPI controller model of Microsemi Smartfusion2.
+ *
+ * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "sysemu/sysemu.h"
+#include "qemu/log.h"
+#include "qemu/fifo32.h"
+
+#include "hw/ssi/ssi.h"
+
+#ifdef MSF2_SPI_ERR_DEBUG
+#define DB_PRINT(...) do { \
+ fprintf(stderr, ": %s: ", __func__); \
+ fprintf(stderr, ## __VA_ARGS__); \
+ } while (0);
+#else
+ #define DB_PRINT(...)
+#endif
+
+#define FIFO_CAPACITY 32
+#define FIFO_CAPACITY 32
+
+#define R_CONTROL 0
+#define R_DFSIZE 1
+#define R_STATUS 2
+#define R_INTCLR 3
+#define R_RX 4
+#define R_TX 5
+#define R_CLKGEN 6
+#define R_SS 7
+#define R_MIS 8
+#define R_RIS 9
+#define R_CONTROL2 10
+#define R_COMMAND 11
+#define R_PKTSIZE 12
+#define R_CMDSIZE 13
+#define R_HWSTATUS 14
+#define R_STAT8 15
+#define R_MAX 16
+
+#define S_RXFIFOFUL (1 << 4)
+#define S_RXFIFOFULNXT (1 << 5)
+#define S_RXFIFOEMP (1 << 6)
+#define S_RXFIFOEMPNXT (1 << 7)
+#define S_TXFIFOFUL (1 << 8)
+#define S_TXFIFOFULNXT (1 << 9)
+#define S_TXFIFOEMP (1 << 10)
+#define S_TXFIFOEMPNXT (1 << 11)
+#define S_FRAMESTART (1 << 12)
+#define S_SSEL (1 << 13)
+#define S_ACTIVE (1 << 14)
+
+#define C_ENABLE (1 << 0)
+#define C_MODE (1 << 1)
+#define C_INTRXDATA (1 << 4)
+#define C_INTTXDATA (1 << 5)
+#define C_INTRXOVRFLO (1 << 6)
+#define C_SPS (1 << 26)
+#define C_BIGFIFO (1 << 29)
+#define C_RESET (1 << 31)
+
+#define FRAMESZ_MASK 0x1F
+#define FMCOUNT_MASK 0x00FFFF00
+#define FMCOUNT_SHIFT 8
+
+#define TXDONE (1 << 0)
+#define RXRDY (1 << 1)
+#define RXCHOVRF (1 << 2)
+
+#define TYPE_MSF2_SPI "msf2-spi"
+#define MSF2_SPI(obj) OBJECT_CHECK(Msf2SPI, (obj), TYPE_MSF2_SPI)
+
+typedef struct Msf2SPI {
+ SysBusDevice parent_obj;
+
+ MemoryRegion mmio;
+
+ qemu_irq irq;
+
+ qemu_irq cs_line;
+
+ SSIBus *spi;
+
+ Fifo32 rx_fifo;
+ Fifo32 tx_fifo;
+
+ int fifo_depth;
+ uint32_t frame_count;
+ bool enabled;
+
+ uint32_t regs[R_MAX];
+} Msf2SPI;
+
+static void txfifo_reset(Msf2SPI *s)
+{
+ fifo32_reset(&s->tx_fifo);
+
+ s->regs[R_STATUS] &= ~S_TXFIFOFUL;
+ s->regs[R_STATUS] |= S_TXFIFOEMP;
+}
+
+static void rxfifo_reset(Msf2SPI *s)
+{
+ fifo32_reset(&s->rx_fifo);
+
+ s->regs[R_STATUS] &= ~S_RXFIFOFUL;
+ s->regs[R_STATUS] |= S_RXFIFOEMP;
+}
+
+static void set_fifodepth(Msf2SPI *s)
+{
+ int size = s->regs[R_DFSIZE] & FRAMESZ_MASK;
+
+ if (0 <= size && size <= 8) {
+ s->fifo_depth = 32;
+ }
+ if (9 <= size && size <= 16) {
+ s->fifo_depth = 16;
+ }
+ if (17 <= size && size <= 32) {
+ s->fifo_depth = 8;
+ }
+}
+
+static void msf2_spi_do_reset(Msf2SPI *s)
+{
+ memset(s->regs, 0, sizeof s->regs);
+ s->regs[R_CONTROL] = 0x80000102;
+ s->regs[R_DFSIZE] = 0x4;
+ s->regs[R_STATUS] = 0x2440;
+ s->regs[R_CLKGEN] = 0x7;
+ s->regs[R_STAT8] = 0x7;
+ s->regs[R_RIS] = 0x0;
+
+ s->fifo_depth = 4;
+ s->frame_count = 1;
+ s->enabled = false;
+
+ rxfifo_reset(s);
+ txfifo_reset(s);
+}
+
+static void update_mis(Msf2SPI *s)
+{
+ uint32_t reg = s->regs[R_CONTROL];
+ uint32_t tmp;
+
+ /*
+ * form the Control register interrupt enable bits
+ * same as RIS, MIS and Interrupt clear registers for simplicity
+ */
+ tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) |
+ ((reg & C_INTTXDATA) >> 5);
+ s->regs[R_MIS] |= tmp & s->regs[R_RIS];
+}
+
+static void spi_update_irq(Msf2SPI *s)
+{
+ int irq;
+
+ update_mis(s);
+ irq = !!(s->regs[R_MIS]);
+
+ qemu_set_irq(s->irq, irq);
+}
+
+static void msf2_spi_reset(DeviceState *d)
+{
+ msf2_spi_do_reset(MSF2_SPI(d));
+}
+
+static uint64_t
+spi_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ Msf2SPI *s = opaque;
+ uint32_t r = 0;
+
+ addr >>= 2;
+ switch (addr) {
+ case R_RX:
+ s->regs[R_STATUS] &= ~S_RXFIFOFUL;
+ s->regs[R_STATUS] &= ~RXCHOVRF;
+ r = fifo32_pop(&s->rx_fifo);
+ if (fifo32_is_empty(&s->rx_fifo)) {
+ s->regs[R_STATUS] |= S_RXFIFOEMP;
+ }
+ break;
+
+ case R_MIS:
+ update_mis(s);
+ r = s->regs[R_MIS];
+ break;
+
+ default:
+ if (addr < ARRAY_SIZE(s->regs)) {
+ r = s->regs[addr];
+ }
+ break;
+ }
+
+ DB_PRINT("addr=" TARGET_FMT_plx " = %x\n", addr * 4, r);
+ spi_update_irq(s);
+ return r;
+}
+
+static void assert_cs(Msf2SPI *s)
+{
+ qemu_set_irq(s->cs_line, 0);
+}
+
+static void deassert_cs(Msf2SPI *s)
+{
+ qemu_set_irq(s->cs_line, 1);
+}
+
+static void spi_flush_txfifo(Msf2SPI *s)
+{
+ uint32_t tx;
+ uint32_t rx;
+ bool sps = !!(s->regs[R_CONTROL] & C_SPS);
+
+ /*
+ * Chip Select(CS) is automatically controlled by this controller.
+ * If SPS bit is set in Control register then CS is asserted
+ * until all the frames set in frame count of Control register are
+ * transferred. If SPS is not set then CS pulses between frames.
+ * Note that Slave Select register specifies which of the CS line
+ * has to be controlled automatically by controller. Bits SS[7:1] are for
+ * masters in FPGA fabric since we model only Microcontroller subsystem
+ * of Smartfusion2 we control only one CS(SS[0]) line.
+ */
+ while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) {
+ assert_cs(s);
+
+ s->regs[R_STATUS] &= ~TXDONE;
+ s->regs[R_STATUS] &= ~RXRDY;
+
+ tx = fifo32_pop(&s->tx_fifo);
+ DB_PRINT("data tx:%x\n", tx);
+ rx = ssi_transfer(s->spi, tx);
+ DB_PRINT("data rx:%x\n", rx);
+
+ if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) {
+ s->regs[R_STATUS] |= RXCHOVRF;
+ s->regs[R_RIS] |= RXCHOVRF;
+ } else {
+ fifo32_push(&s->rx_fifo, rx);
+ s->regs[R_STATUS] &= ~S_RXFIFOEMP;
+ if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) {
+ s->regs[R_STATUS] |= S_RXFIFOFULNXT;
+ }
+ if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) {
+ s->regs[R_STATUS] |= S_RXFIFOFUL;
+ }
+ }
+ s->frame_count--;
+ if (!sps) {
+ deassert_cs(s);
+ assert_cs(s);
+ }
+ }
+
+ if (!sps) {
+ deassert_cs(s);
+ }
+
+ if (!s->frame_count) {
+ s->frame_count = (s->regs[R_CONTROL] & FMCOUNT_MASK) >> FMCOUNT_SHIFT;
+ if (sps) {
+ deassert_cs(s);
+ }
+ s->regs[R_RIS] |= TXDONE;
+ s->regs[R_RIS] |= RXRDY;
+ s->regs[R_STATUS] |= TXDONE;
+ s->regs[R_STATUS] |= RXRDY;
+ }
+}
+
+static void spi_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ Msf2SPI *s = opaque;
+ uint32_t value = val64;
+
+ DB_PRINT("addr=" TARGET_FMT_plx " = %x\n", addr, value);
+ addr >>= 2;
+
+ switch (addr) {
+ case R_TX:
+ /* adding to already full FIFO */
+ if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) {
+ break;
+ }
+ s->regs[R_STATUS] &= ~S_TXFIFOEMP;
+ fifo32_push(&s->tx_fifo, value);
+ if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) {
+ s->regs[R_STATUS] |= S_TXFIFOFULNXT;
+ }
+ if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) {
+ s->regs[R_STATUS] |= S_TXFIFOFUL;
+ }
+ if (s->enabled) {
+ spi_flush_txfifo(s);
+ }
+ break;
+
+ case R_CONTROL:
+ s->regs[R_CONTROL] = value;
+ if (value & C_BIGFIFO) {
+ set_fifodepth(s);
+ } else {
+ s->fifo_depth = 4;
+ }
+ if (value & C_ENABLE) {
+ s->enabled = true;
+ } else {
+ s->enabled = false;
+ }
+ s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT;
+ if (value & C_RESET) {
+ msf2_spi_do_reset(s);
+ }
+ break;
+
+ case R_DFSIZE:
+ if (s->enabled) {
+ break;
+ }
+ s->regs[R_DFSIZE] = value;
+ break;
+
+ case R_INTCLR:
+ s->regs[R_INTCLR] = value;
+ if (value & TXDONE) {
+ s->regs[R_RIS] &= ~TXDONE;
+ }
+ if (value & RXRDY) {
+ s->regs[R_RIS] &= ~RXRDY;
+ }
+ if (value & RXCHOVRF) {
+ s->regs[R_RIS] &= ~RXCHOVRF;
+ }
+ break;
+
+ case R_MIS:
+ case R_STATUS:
+ case R_RIS:
+ break;
+
+ default:
+ if (addr < ARRAY_SIZE(s->regs)) {
+ s->regs[addr] = value;
+ }
+ break;
+ }
+
+ spi_update_irq(s);
+}
+
+static const MemoryRegionOps spi_ops = {
+ .read = spi_read,
+ .write = spi_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4
+ }
+};
+
+static int msf2_spi_init(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ Msf2SPI *s = MSF2_SPI(dev);
+
+ DB_PRINT("\n");
+
+ s->spi = ssi_create_bus(dev, "spi");
+
+ sysbus_init_irq(sbd, &s->irq);
+ ssi_auto_connect_slaves(dev, &s->cs_line, s->spi);
+ sysbus_init_irq(sbd, &s->cs_line);
+
+ memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s,
+ "msf2-spi", R_MAX * 4);
+ sysbus_init_mmio(sbd, &s->mmio);
+
+ fifo32_create(&s->tx_fifo, FIFO_CAPACITY);
+ fifo32_create(&s->rx_fifo, FIFO_CAPACITY);
+
+ return 0;
+}
+
+static const VMStateDescription vmstate_msf2_spi = {
+ .name = "msf2_spi",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_FIFO32(tx_fifo, Msf2SPI),
+ VMSTATE_FIFO32(rx_fifo, Msf2SPI),
+ VMSTATE_UINT32_ARRAY(regs, Msf2SPI, R_MAX),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void msf2_spi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = msf2_spi_init;
+ dc->reset = msf2_spi_reset;
+ dc->vmsd = &vmstate_msf2_spi;
+}
+
+static const TypeInfo msf2_spi_info = {
+ .name = TYPE_MSF2_SPI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Msf2SPI),
+ .class_init = msf2_spi_class_init,
+};
+
+static void msf2_spi_register_types(void)
+{
+ type_register_static(&msf2_spi_info);
+}
+
+type_init(msf2_spi_register_types)
Modelled Microsemi's Smartfusion2 SPI controller. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> --- hw/ssi/Makefile.objs | 1 + hw/ssi/msf2_spi.c | 449 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 450 insertions(+) create mode 100644 hw/ssi/msf2_spi.c