diff mbox

[PULL,04/30] sd: sdhci: check transfer mode register in multi block transfer

Message ID 1488218699-31035-5-git-send-email-peter.maydell@linaro.org
State New
Headers show

Commit Message

Peter Maydell Feb. 27, 2017, 6:04 p.m. UTC 
From: Prasad J Pandit <pjp@fedoraproject.org>

In the SDHCI protocol, the transfer mode register value
is used during multi block transfer to check if block count
register is enabled and should be updated. Transfer mode
register could be set such that, block count register would
not be updated, thus leading to an infinite loop. Add check
to avoid it.

Reported-by: Wjjzhang <wjjzhang@tencent.com>
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-3-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sdhci.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index a65c77d..5adeab6 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -487,6 +487,11 @@  static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
     uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12);
     uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
 
+    if (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || !s->blkcnt) {
+        qemu_log_mask(LOG_UNIMP, "infinite transfer is not supported\n");
+        return;
+    }
+
     /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for
      * possible stop at page boundary if initial address is not page aligned,
      * allow them to work properly */
@@ -798,11 +803,6 @@  static void sdhci_data_transfer(void *opaque)
     if (s->trnmod & SDHC_TRNS_DMA) {
         switch (SDHC_DMA_TYPE(s->hostctl)) {
         case SDHC_CTRL_SDMA:
-            if ((s->trnmod & SDHC_TRNS_MULTI) &&
-                    (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || s->blkcnt == 0)) {
-                break;
-            }
-
             if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
                 sdhci_sdma_transfer_single_block(s);
             } else {