diff mbox

[QEMU-PPC,V3,03/10] target/ppc/POWER9: Adapt LPCR handling for POWER9

Message ID 1487563478-22265-4-git-send-email-sjitindarsingh@gmail.com
State New
Headers show

Commit Message

Suraj Jitindar Singh Feb. 20, 2017, 4:04 a.m. UTC 
The logical partitioning control register controls a threads operation
based on the partition it is currently executing. Add new definitions and
update the mask used when writing to the LPCR based on the POWER9 spec.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
---
 target/ppc/cpu.h            | 18 ++++++++++++++++++
 target/ppc/mmu-hash64.c     |  8 ++++++++
 target/ppc/translate_init.c | 24 ++++++++++++++++++------
 3 files changed, 44 insertions(+), 6 deletions(-)

Comments

Balbir Singh Feb. 20, 2017, 7:31 a.m. UTC | #1 
On Mon, Feb 20, 2017 at 03:04:31PM +1100, Suraj Jitindar Singh wrote:
> The logical partitioning control register controls a threads operation
> based on the partition it is currently executing. Add new definitions and
> update the mask used when writing to the LPCR based on the POWER9 spec.
> 
> Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
> ---
>  target/ppc/cpu.h            | 18 ++++++++++++++++++
>  target/ppc/mmu-hash64.c     |  8 ++++++++
>  target/ppc/translate_init.c | 24 ++++++++++++++++++------
>  3 files changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index bb96dd5..425e79d 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -384,12 +384,19 @@ struct ppc_slb_t {
>  #define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
>  #define LPCR_VRMASD_SHIFT (63 - 16)
>  #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
> +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> +#define LPCR_PECE_U_SHIFT (63 - 19)
> +#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
> +#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt Exit Enable */
>  #define LPCR_RMLS_SHIFT   (63 - 37)
>  #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
>  #define LPCR_ILE          (1ull << (63 - 38))
>  #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt location */
>  #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
> +#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process Table */
> +#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced Virtualisation */
>  #define LPCR_ONL          (1ull << (63 - 45))
> +#define LPCR_LD           (1ull << (63 - 46)) /* Large Decrementer */
>  #define LPCR_P7_PECE0     (1ull << (63 - 49))
>  #define LPCR_P7_PECE1     (1ull << (63 - 50))
>  #define LPCR_P7_PECE2     (1ull << (63 - 51))
> @@ -398,11 +405,22 @@ struct ppc_slb_t {
>  #define LPCR_P8_PECE2     (1ull << (63 - 49))
>  #define LPCR_P8_PECE3     (1ull << (63 - 50))
>  #define LPCR_P8_PECE4     (1ull << (63 - 51))
> +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> +#define LPCR_PECE_L_SHIFT (63 - 51)
> +#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
> +#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged Doorbell Exit EN */
> +#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell Exit Enable */
> +#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit Enable        */
> +#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer Exit Enable     */
> +#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit Enable           */
>  #define LPCR_MER          (1ull << (63 - 52))
> +#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest Translation Shootdown */
>  #define LPCR_TC           (1ull << (63 - 54))
> +#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern Interrupt Control */
>  #define LPCR_LPES0        (1ull << (63 - 60))
>  #define LPCR_LPES1        (1ull << (63 - 61))
>  #define LPCR_RMI          (1ull << (63 - 62))
> +#define LPCR_HVICE        (1ull << (63 - 62)) /* HV Virtualisation Int Enable */
>  #define LPCR_HDICE        (1ull << (63 - 63))

This patch is missing

#define LPCR_HR	(1ull << (63 - 43))	/* HV uses Radix Tree Translation */

See arch/powerpc/include/asm/reg.h in the Linux kernel. 

Balbir Singh.
David Gibson Feb. 23, 2017, 3:45 a.m. UTC | #2 
On Mon, Feb 20, 2017 at 03:04:31PM +1100, Suraj Jitindar Singh wrote:
> The logical partitioning control register controls a threads operation
> based on the partition it is currently executing. Add new definitions and
> update the mask used when writing to the LPCR based on the POWER9 spec.
> 
> Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  target/ppc/cpu.h            | 18 ++++++++++++++++++
>  target/ppc/mmu-hash64.c     |  8 ++++++++
>  target/ppc/translate_init.c | 24 ++++++++++++++++++------
>  3 files changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index bb96dd5..425e79d 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -384,12 +384,19 @@ struct ppc_slb_t {
>  #define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
>  #define LPCR_VRMASD_SHIFT (63 - 16)
>  #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
> +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> +#define LPCR_PECE_U_SHIFT (63 - 19)
> +#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
> +#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt Exit Enable */
>  #define LPCR_RMLS_SHIFT   (63 - 37)
>  #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
>  #define LPCR_ILE          (1ull << (63 - 38))
>  #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt location */
>  #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
> +#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process Table */
> +#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced Virtualisation */
>  #define LPCR_ONL          (1ull << (63 - 45))
> +#define LPCR_LD           (1ull << (63 - 46)) /* Large Decrementer */
>  #define LPCR_P7_PECE0     (1ull << (63 - 49))
>  #define LPCR_P7_PECE1     (1ull << (63 - 50))
>  #define LPCR_P7_PECE2     (1ull << (63 - 51))
> @@ -398,11 +405,22 @@ struct ppc_slb_t {
>  #define LPCR_P8_PECE2     (1ull << (63 - 49))
>  #define LPCR_P8_PECE3     (1ull << (63 - 50))
>  #define LPCR_P8_PECE4     (1ull << (63 - 51))
> +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> +#define LPCR_PECE_L_SHIFT (63 - 51)
> +#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
> +#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged Doorbell Exit EN */
> +#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell Exit Enable */
> +#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit Enable        */
> +#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer Exit Enable     */
> +#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit Enable           */
>  #define LPCR_MER          (1ull << (63 - 52))
> +#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest Translation Shootdown */
>  #define LPCR_TC           (1ull << (63 - 54))
> +#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern Interrupt Control */
>  #define LPCR_LPES0        (1ull << (63 - 60))
>  #define LPCR_LPES1        (1ull << (63 - 61))
>  #define LPCR_RMI          (1ull << (63 - 62))
> +#define LPCR_HVICE        (1ull << (63 - 62)) /* HV Virtualisation Int Enable */
>  #define LPCR_HDICE        (1ull << (63 - 63))
>  
>  #define msr_sf   ((env->msr >> MSR_SF)   & 1)
> diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> index bb78fb5..24d9901 100644
> --- a/target/ppc/mmu-hash64.c
> +++ b/target/ppc/mmu-hash64.c
> @@ -1050,6 +1050,14 @@ void helper_store_lpcr(CPUPPCState *env, target_ulong val)
>                        LPCR_P8_PECE2 | LPCR_P8_PECE3 | LPCR_P8_PECE4 |
>                        LPCR_MER | LPCR_TC | LPCR_LPES0 | LPCR_HDICE);
>          break;
> +    case POWERPC_MMU_3_00: /* P9 */
> +        lpcr = val & (LPCR_VPM1 | LPCR_ISL | LPCR_KBV | LPCR_DPFD |
> +                      (LPCR_PECE_U_MASK & LPCR_HVEE) | LPCR_ILE | LPCR_AIL |
> +                      LPCR_UPRT | LPCR_EVIRT | LPCR_ONL |
> +                      (LPCR_PECE_L_MASK & (LPCR_PDEE | LPCR_HDEE | LPCR_EEE |
> +                      LPCR_DEE | LPCR_OEE)) | LPCR_MER | LPCR_GTSE | LPCR_TC |
> +                      LPCR_HEIC | LPCR_LPES0 | LPCR_HVICE | LPCR_HDICE);
> +        break;
>      default:
>          ;
>      }
> diff --git a/target/ppc/translate_init.c b/target/ppc/translate_init.c
> index 84bf125..be35cbd 100644
> --- a/target/ppc/translate_init.c
> +++ b/target/ppc/translate_init.c
> @@ -8870,12 +8870,24 @@ void cpu_ppc_set_papr(PowerPCCPU *cpu)
>      lpcr->default_value &= ~LPCR_RMLS;
>      lpcr->default_value |= 1ull << LPCR_RMLS_SHIFT;
>  
> -    /* P7 and P8 has slightly different PECE bits, mostly because P8 adds
> -     * bit 47 and 48 which are reserved on P7. Here we set them all, which
> -     * will work as expected for both implementations
> -     */
> -    lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 | LPCR_P8_PECE2 |
> -                           LPCR_P8_PECE3 | LPCR_P8_PECE4;
> +    switch (env->mmu_model) {
> +    case POWERPC_MMU_3_00:
> +        /* By default we choose legacy mode and switch to new hash or radix
> +         * when a register process table hcall is made. So disable process
> +         * tables and guest translation shootdown by default
> +         */
> +        lpcr->default_value &= ~(LPCR_UPRT | LPCR_GTSE);
> +        lpcr->default_value |= LPCR_PDEE | LPCR_HDEE | LPCR_EEE | LPCR_DEE |
> +                               LPCR_OEE;
> +        break;
> +    default:
> +        /* P7 and P8 has slightly different PECE bits, mostly because P8 adds
> +         * bit 47 and 48 which are reserved on P7. Here we set them all, which
> +         * will work as expected for both implementations
> +         */
> +        lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 | LPCR_P8_PECE2 |
> +                               LPCR_P8_PECE3 | LPCR_P8_PECE4;
> +    }
>  
>      /* We should be followed by a CPU reset but update the active value
>       * just in case...
David Gibson Feb. 23, 2017, 3:47 a.m. UTC | #3 
On Mon, Feb 20, 2017 at 06:31:46PM +1100, Balbir Singh wrote:
> On Mon, Feb 20, 2017 at 03:04:31PM +1100, Suraj Jitindar Singh wrote:
> > The logical partitioning control register controls a threads operation
> > based on the partition it is currently executing. Add new definitions and
> > update the mask used when writing to the LPCR based on the POWER9 spec.
> > 
> > Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
> > ---
> >  target/ppc/cpu.h            | 18 ++++++++++++++++++
> >  target/ppc/mmu-hash64.c     |  8 ++++++++
> >  target/ppc/translate_init.c | 24 ++++++++++++++++++------
> >  3 files changed, 44 insertions(+), 6 deletions(-)
> > 
> > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> > index bb96dd5..425e79d 100644
> > --- a/target/ppc/cpu.h
> > +++ b/target/ppc/cpu.h
> > @@ -384,12 +384,19 @@ struct ppc_slb_t {
> >  #define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
> >  #define LPCR_VRMASD_SHIFT (63 - 16)
> >  #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
> > +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> > +#define LPCR_PECE_U_SHIFT (63 - 19)
> > +#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
> > +#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt Exit Enable */
> >  #define LPCR_RMLS_SHIFT   (63 - 37)
> >  #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
> >  #define LPCR_ILE          (1ull << (63 - 38))
> >  #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt location */
> >  #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
> > +#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process Table */
> > +#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced Virtualisation */
> >  #define LPCR_ONL          (1ull << (63 - 45))
> > +#define LPCR_LD           (1ull << (63 - 46)) /* Large Decrementer */
> >  #define LPCR_P7_PECE0     (1ull << (63 - 49))
> >  #define LPCR_P7_PECE1     (1ull << (63 - 50))
> >  #define LPCR_P7_PECE2     (1ull << (63 - 51))
> > @@ -398,11 +405,22 @@ struct ppc_slb_t {
> >  #define LPCR_P8_PECE2     (1ull << (63 - 49))
> >  #define LPCR_P8_PECE3     (1ull << (63 - 50))
> >  #define LPCR_P8_PECE4     (1ull << (63 - 51))
> > +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> > +#define LPCR_PECE_L_SHIFT (63 - 51)
> > +#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
> > +#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged Doorbell Exit EN */
> > +#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell Exit Enable */
> > +#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit Enable        */
> > +#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer Exit Enable     */
> > +#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit Enable           */
> >  #define LPCR_MER          (1ull << (63 - 52))
> > +#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest Translation Shootdown */
> >  #define LPCR_TC           (1ull << (63 - 54))
> > +#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern Interrupt Control */
> >  #define LPCR_LPES0        (1ull << (63 - 60))
> >  #define LPCR_LPES1        (1ull << (63 - 61))
> >  #define LPCR_RMI          (1ull << (63 - 62))
> > +#define LPCR_HVICE        (1ull << (63 - 62)) /* HV Virtualisation Int Enable */
> >  #define LPCR_HDICE        (1ull << (63 - 63))
> 
> This patch is missing
> 
> #define LPCR_HR	(1ull << (63 - 43))	/* HV uses Radix Tree Translation */
> 
> See arch/powerpc/include/asm/reg.h in the Linux kernel. 

Suraj, if you're resending anyway, add this.  It doesn't matter for
non-powernv, of course, but we might as well put the #define in to
document it.
Suraj Jitindar Singh Feb. 23, 2017, 4:21 a.m. UTC | #4 
On Thu, 2017-02-23 at 14:47 +1100, David Gibson wrote:
> On Mon, Feb 20, 2017 at 06:31:46PM +1100, Balbir Singh wrote:
> > 
> > On Mon, Feb 20, 2017 at 03:04:31PM +1100, Suraj Jitindar Singh
> > wrote:
> > > 
> > > The logical partitioning control register controls a threads
> > > operation
> > > based on the partition it is currently executing. Add new
> > > definitions and
> > > update the mask used when writing to the LPCR based on the POWER9
> > > spec.
> > > 
> > > Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
> > > ---
> > >  target/ppc/cpu.h            | 18 ++++++++++++++++++
> > >  target/ppc/mmu-hash64.c     |  8 ++++++++
> > >  target/ppc/translate_init.c | 24 ++++++++++++++++++------
> > >  3 files changed, 44 insertions(+), 6 deletions(-)
> > > 
> > > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> > > index bb96dd5..425e79d 100644
> > > --- a/target/ppc/cpu.h
> > > +++ b/target/ppc/cpu.h
> > > @@ -384,12 +384,19 @@ struct ppc_slb_t {
> > >  #define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
> > >  #define LPCR_VRMASD_SHIFT (63 - 16)
> > >  #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
> > > +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask
> > > */
> > > +#define LPCR_PECE_U_SHIFT (63 - 19)
> > > +#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
> > > +#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt
> > > Exit Enable */
> > >  #define LPCR_RMLS_SHIFT   (63 - 37)
> > >  #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
> > >  #define LPCR_ILE          (1ull << (63 - 38))
> > >  #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt
> > > location */
> > >  #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
> > > +#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process
> > > Table */
> > > +#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced
> > > Virtualisation */
> > >  #define LPCR_ONL          (1ull << (63 - 45))
> > > +#define LPCR_LD           (1ull << (63 - 46)) /* Large
> > > Decrementer */
> > >  #define LPCR_P7_PECE0     (1ull << (63 - 49))
> > >  #define LPCR_P7_PECE1     (1ull << (63 - 50))
> > >  #define LPCR_P7_PECE2     (1ull << (63 - 51))
> > > @@ -398,11 +405,22 @@ struct ppc_slb_t {
> > >  #define LPCR_P8_PECE2     (1ull << (63 - 49))
> > >  #define LPCR_P8_PECE3     (1ull << (63 - 50))
> > >  #define LPCR_P8_PECE4     (1ull << (63 - 51))
> > > +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask
> > > */
> > > +#define LPCR_PECE_L_SHIFT (63 - 51)
> > > +#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
> > > +#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged
> > > Doorbell Exit EN */
> > > +#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell
> > > Exit Enable */
> > > +#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit
> > > Enable        */
> > > +#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer
> > > Exit Enable     */
> > > +#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit
> > > Enable           */
> > >  #define LPCR_MER          (1ull << (63 - 52))
> > > +#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest
> > > Translation Shootdown */
> > >  #define LPCR_TC           (1ull << (63 - 54))
> > > +#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern
> > > Interrupt Control */
> > >  #define LPCR_LPES0        (1ull << (63 - 60))
> > >  #define LPCR_LPES1        (1ull << (63 - 61))
> > >  #define LPCR_RMI          (1ull << (63 - 62))
> > > +#define LPCR_HVICE        (1ull << (63 - 62)) /* HV
> > > Virtualisation Int Enable */
> > >  #define LPCR_HDICE        (1ull << (63 - 63))
> > This patch is missing
> > 
> > #define LPCR_HR	(1ull << (63 - 43))	/* HV uses Radix
> > Tree Translation */
> > 
> > See arch/powerpc/include/asm/reg.h in the Linux kernel. 
> Suraj, if you're resending anyway, add this.  It doesn't matter for
> non-powernv, of course, but we might as well put the #define in to
> document it.
> 

Yeah adding a define can't hurt
diff mbox

Patch

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index bb96dd5..425e79d 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -384,12 +384,19 @@  struct ppc_slb_t {
 #define LPCR_DPFD         (0x7ull << LPCR_DPFD_SHIFT)
 #define LPCR_VRMASD_SHIFT (63 - 16)
 #define LPCR_VRMASD       (0x1full << LPCR_VRMASD_SHIFT)
+/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
+#define LPCR_PECE_U_SHIFT (63 - 19)
+#define LPCR_PECE_U_MASK  (0x7ull << LPCR_PECE_U_SHIFT)
+#define LPCR_HVEE         (1ull << (63 - 17)) /* Hypervisor Virt Exit Enable */
 #define LPCR_RMLS_SHIFT   (63 - 37)
 #define LPCR_RMLS         (0xfull << LPCR_RMLS_SHIFT)
 #define LPCR_ILE          (1ull << (63 - 38))
 #define LPCR_AIL_SHIFT    (63 - 40)      /* Alternate interrupt location */
 #define LPCR_AIL          (3ull << LPCR_AIL_SHIFT)
+#define LPCR_UPRT         (1ull << (63 - 41)) /* Use Process Table */
+#define LPCR_EVIRT        (1ull << (63 - 42)) /* Enhanced Virtualisation */
 #define LPCR_ONL          (1ull << (63 - 45))
+#define LPCR_LD           (1ull << (63 - 46)) /* Large Decrementer */
 #define LPCR_P7_PECE0     (1ull << (63 - 49))
 #define LPCR_P7_PECE1     (1ull << (63 - 50))
 #define LPCR_P7_PECE2     (1ull << (63 - 51))
@@ -398,11 +405,22 @@  struct ppc_slb_t {
 #define LPCR_P8_PECE2     (1ull << (63 - 49))
 #define LPCR_P8_PECE3     (1ull << (63 - 50))
 #define LPCR_P8_PECE4     (1ull << (63 - 51))
+/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
+#define LPCR_PECE_L_SHIFT (63 - 51)
+#define LPCR_PECE_L_MASK  (0x1full << LPCR_PECE_L_SHIFT)
+#define LPCR_PDEE         (1ull << (63 - 47)) /* Privileged Doorbell Exit EN */
+#define LPCR_HDEE         (1ull << (63 - 48)) /* Hyperv Doorbell Exit Enable */
+#define LPCR_EEE          (1ull << (63 - 49)) /* External Exit Enable        */
+#define LPCR_DEE          (1ull << (63 - 50)) /* Decrementer Exit Enable     */
+#define LPCR_OEE          (1ull << (63 - 51)) /* Other Exit Enable           */
 #define LPCR_MER          (1ull << (63 - 52))
+#define LPCR_GTSE         (1ull << (63 - 53)) /* Guest Translation Shootdown */
 #define LPCR_TC           (1ull << (63 - 54))
+#define LPCR_HEIC         (1ull << (63 - 59)) /* HV Extern Interrupt Control */
 #define LPCR_LPES0        (1ull << (63 - 60))
 #define LPCR_LPES1        (1ull << (63 - 61))
 #define LPCR_RMI          (1ull << (63 - 62))
+#define LPCR_HVICE        (1ull << (63 - 62)) /* HV Virtualisation Int Enable */
 #define LPCR_HDICE        (1ull << (63 - 63))
 
 #define msr_sf   ((env->msr >> MSR_SF)   & 1)
diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index bb78fb5..24d9901 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -1050,6 +1050,14 @@  void helper_store_lpcr(CPUPPCState *env, target_ulong val)
                       LPCR_P8_PECE2 | LPCR_P8_PECE3 | LPCR_P8_PECE4 |
                       LPCR_MER | LPCR_TC | LPCR_LPES0 | LPCR_HDICE);
         break;
+    case POWERPC_MMU_3_00: /* P9 */
+        lpcr = val & (LPCR_VPM1 | LPCR_ISL | LPCR_KBV | LPCR_DPFD |
+                      (LPCR_PECE_U_MASK & LPCR_HVEE) | LPCR_ILE | LPCR_AIL |
+                      LPCR_UPRT | LPCR_EVIRT | LPCR_ONL |
+                      (LPCR_PECE_L_MASK & (LPCR_PDEE | LPCR_HDEE | LPCR_EEE |
+                      LPCR_DEE | LPCR_OEE)) | LPCR_MER | LPCR_GTSE | LPCR_TC |
+                      LPCR_HEIC | LPCR_LPES0 | LPCR_HVICE | LPCR_HDICE);
+        break;
     default:
         ;
     }
diff --git a/target/ppc/translate_init.c b/target/ppc/translate_init.c
index 84bf125..be35cbd 100644
--- a/target/ppc/translate_init.c
+++ b/target/ppc/translate_init.c
@@ -8870,12 +8870,24 @@  void cpu_ppc_set_papr(PowerPCCPU *cpu)
     lpcr->default_value &= ~LPCR_RMLS;
     lpcr->default_value |= 1ull << LPCR_RMLS_SHIFT;
 
-    /* P7 and P8 has slightly different PECE bits, mostly because P8 adds
-     * bit 47 and 48 which are reserved on P7. Here we set them all, which
-     * will work as expected for both implementations
-     */
-    lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 | LPCR_P8_PECE2 |
-                           LPCR_P8_PECE3 | LPCR_P8_PECE4;
+    switch (env->mmu_model) {
+    case POWERPC_MMU_3_00:
+        /* By default we choose legacy mode and switch to new hash or radix
+         * when a register process table hcall is made. So disable process
+         * tables and guest translation shootdown by default
+         */
+        lpcr->default_value &= ~(LPCR_UPRT | LPCR_GTSE);
+        lpcr->default_value |= LPCR_PDEE | LPCR_HDEE | LPCR_EEE | LPCR_DEE |
+                               LPCR_OEE;
+        break;
+    default:
+        /* P7 and P8 has slightly different PECE bits, mostly because P8 adds
+         * bit 47 and 48 which are reserved on P7. Here we set them all, which
+         * will work as expected for both implementations
+         */
+        lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 | LPCR_P8_PECE2 |
+                               LPCR_P8_PECE3 | LPCR_P8_PECE4;
+    }
 
     /* We should be followed by a CPU reset but update the active value
      * just in case...