diff mbox

[PULL,8/9] hw/arm/spitz: Fix reset handling

Message ID 1477666764-19403-9-git-send-email-peter.maydell@linaro.org
State New
Headers show

Commit Message

Peter Maydell Oct. 28, 2016, 2:59 p.m. UTC 
From: Guenter Roeck <linux@roeck-us.net>

Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for spitz to reset the entire system
and not just the CPU.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/spitz.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
index 41cc2ee..949a15a 100644
--- a/hw/arm/spitz.c
+++ b/hw/arm/spitz.c
@@ -29,6 +29,7 @@ 
 #include "sysemu/block-backend.h"
 #include "hw/sysbus.h"
 #include "exec/address-spaces.h"
+#include "sysemu/sysemu.h"
 
 #undef REG_FMT
 #define REG_FMT			"0x%02lx"
@@ -844,9 +845,18 @@  static void spitz_lcd_hsync_handler(void *opaque, int line, int level)
     spitz_hsync ^= 1;
 }
 
+static void spitz_reset(void *opaque, int line, int level)
+{
+    if (level) {
+        qemu_system_reset_request();
+    }
+}
+
 static void spitz_gpio_setup(PXA2xxState *cpu, int slots)
 {
     qemu_irq lcd_hsync;
+    qemu_irq reset;
+
     /*
      * Bad hack: We toggle the LCD hsync GPIO on every GPIO status
      * read to satisfy broken guests that poll-wait for hsync.
@@ -867,7 +877,8 @@  static void spitz_gpio_setup(PXA2xxState *cpu, int slots)
     qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER));
 
     /* Handle reset */
-    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset);
+    reset = qemu_allocate_irq(spitz_reset, cpu, 0);
+    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, reset);
 
     /* PCMCIA signals: card's IRQ and Card-Detect */
     if (slots >= 1)