diff mbox

[v4,2/9] softfloat: For Mips only, correct default NaN values

Message ID 1460465891-6142-3-git-send-email-aleksandar.markovic@rt-rk.com
State New
Headers show

Commit Message

Aleksandar Markovic April 12, 2016, 12:58 p.m. UTC
From: Aleksandar Markovic <aleksandar.markovic@imgtec.com>

Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct default NaN values (in their 16-, 32-, and 64-bit flavors).

For more info, see [1], page 84, Table 6.3 "Value Supplied When
a New Quiet NaN Is Created", and [2], page 52, table 3.7 "Default
NaN Encodings".

[1] "MIPS® Architecture For Programmers Volume II-A:
    The MIPS64® Instruction Set Reference Manual",
    Imagination Technologies LTD, Revision 6.04, November 13, 2015

[2] "MIPS Architecture for Programmers Volume IV-j:
    The MIPS32® SIMD Architecture Module",
    Imagination Technologies LTD, Revision 1.12, February 3, 2016

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
---
 fpu/softfloat-specialize.h |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Leon Alrae April 13, 2016, 12:23 p.m. UTC | #1
On 12/04/16 13:58, Aleksandar Markovic wrote:
> From: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
> 
> Only for Mips platform, and only for cases when snan_bit_is_one is 0,
> correct default NaN values (in their 16-, 32-, and 64-bit flavors).
> 
> For more info, see [1], page 84, Table 6.3 "Value Supplied When
> a New Quiet NaN Is Created", and [2], page 52, table 3.7 "Default
> NaN Encodings".
> 
> [1] "MIPS® Architecture For Programmers Volume II-A:
>     The MIPS64® Instruction Set Reference Manual",
>     Imagination Technologies LTD, Revision 6.04, November 13, 2015
> 
> [2] "MIPS Architecture for Programmers Volume IV-j:
>     The MIPS32® SIMD Architecture Module",
>     Imagination Technologies LTD, Revision 1.12, February 3, 2016
> 
> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
> ---
>  fpu/softfloat-specialize.h |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
> index 53dae9b..169246e 100644
> --- a/fpu/softfloat-specialize.h
> +++ b/fpu/softfloat-specialize.h
> @@ -97,7 +97,11 @@ float16 float16_default_nan(float_status *status)
>      if (status->snan_bit_is_one) {
>          return const_float16(0x7DFF);
>      } else {
> +#if defined(TARGET_MIPS)
> +        return const_float16(0x7E00);
> +#else
>          return const_float16(0xFE00);
> +#endif
>      }
>  #endif
>  }
> @@ -116,7 +120,11 @@ float32 float32_default_nan(float_status *status)
>      if (status->snan_bit_is_one) {
>          return const_float32(0x7FBFFFFF);
>      } else {
> +#if defined(TARGET_MIPS)
> +        return const_float32(0x7FC00000);
> +#else
>          return const_float32(0xFFC00000);
> +#endif
>      }
>  #endif
>  }
> @@ -135,7 +143,11 @@ float64 float64_default_nan(float_status *status)
>      if (status->snan_bit_is_one) {
>          return const_float64(LIT64( 0x7FF7FFFFFFFFFFFF ));
>      } else {
> +#if defined(TARGET_MIPS)
> +        return const_float64(LIT64( 0x7FF8000000000000 ));

Could you remove space after/before the parentheses, please? The
scripts/checkpatch.pl would complain here. Otherwise looks good to me.

Thanks,
Leon

> +#else
>          return const_float64(LIT64( 0xFFF8000000000000 ));
> +#endif
>      }
>  #endif
>  }
>
diff mbox

Patch

diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
index 53dae9b..169246e 100644
--- a/fpu/softfloat-specialize.h
+++ b/fpu/softfloat-specialize.h
@@ -97,7 +97,11 @@  float16 float16_default_nan(float_status *status)
     if (status->snan_bit_is_one) {
         return const_float16(0x7DFF);
     } else {
+#if defined(TARGET_MIPS)
+        return const_float16(0x7E00);
+#else
         return const_float16(0xFE00);
+#endif
     }
 #endif
 }
@@ -116,7 +120,11 @@  float32 float32_default_nan(float_status *status)
     if (status->snan_bit_is_one) {
         return const_float32(0x7FBFFFFF);
     } else {
+#if defined(TARGET_MIPS)
+        return const_float32(0x7FC00000);
+#else
         return const_float32(0xFFC00000);
+#endif
     }
 #endif
 }
@@ -135,7 +143,11 @@  float64 float64_default_nan(float_status *status)
     if (status->snan_bit_is_one) {
         return const_float64(LIT64( 0x7FF7FFFFFFFFFFFF ));
     } else {
+#if defined(TARGET_MIPS)
+        return const_float64(LIT64( 0x7FF8000000000000 ));
+#else
         return const_float64(LIT64( 0xFFF8000000000000 ));
+#endif
     }
 #endif
 }