diff mbox

[RFC,v5,5/5] qemu-iotests: s390x: fix test 051

Message ID 1423555201-32429-6-git-send-email-chenxg@linux.vnet.ibm.com
State New
Headers show

Commit Message

Xiao Guang Chen Feb. 10, 2015, 8 a.m. UTC 
The tests for device type "ide_cd" should only be tested for the pc platform.
The default device id of hard disk on the s390 platform differs to that
of the x86 platform. A new variable device_id is defined and "virtio0"
set for the s390 platform. A x86 platform specific output file is also
needed.
A new filter was added to filter s390 warnings.

Signed-off-by: Xiao Guang Chen,chenxg@linux.vnet.ibm.com
---
 tests/qemu-iotests/051           |  79 +++++---
 tests/qemu-iotests/051.out       | 160 +++++----------
 tests/qemu-iotests/051.pc.out    | 427 +++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/common.filter |   7 +
 4 files changed, 532 insertions(+), 141 deletions(-)
 create mode 100644 tests/qemu-iotests/051.pc.out

Comments

Max Reitz Feb. 10, 2015, 9:19 p.m. UTC | #1 
On 2015-02-10 at 03:00, Xiao Guang Chen wrote:
> The tests for device type "ide_cd" should only be tested for the pc platform.
> The default device id of hard disk on the s390 platform differs to that
> of the x86 platform. A new variable device_id is defined and "virtio0"
> set for the s390 platform. A x86 platform specific output file is also
> needed.
> A new filter was added to filter s390 warnings.
>
> Signed-off-by: Xiao Guang Chen,chenxg@linux.vnet.ibm.com
> ---
>   tests/qemu-iotests/051           |  79 +++++---
>   tests/qemu-iotests/051.out       | 160 +++++----------
>   tests/qemu-iotests/051.pc.out    | 427 +++++++++++++++++++++++++++++++++++++++
>   tests/qemu-iotests/common.filter |   7 +
>   4 files changed, 532 insertions(+), 141 deletions(-)
>   create mode 100644 tests/qemu-iotests/051.pc.out
>
> diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
> index 11c858f..fedf2d4 100755
> --- a/tests/qemu-iotests/051
> +++ b/tests/qemu-iotests/051

[snip]

> @@ -241,28 +253,37 @@ echo
>   echo === Snapshot mode ===
>   echo
>   
> +case "$QEMU_DEFAULT_MACHINE" in
> +    pc)
> +        device_id="ide0-hd0"
> +        ;;
> +    *)
> +        device_id="virtio0"

"virtio0" is available for s390-virtio by default, but probably not for 
other platforms. So I suggest you change the * into s390-virtio and skip 
these tests for non-s390-virtio and non-pc platforms.

On second thought, this test is probably highly platform-specific 
(because the reference output is tied pretty tightly to the default 
device types of the platform in used). Maybe we need a 
_supported_platforms or something, and in this case only pc and 
s390-virtio would be supported.

However, considering that the iotests only worked for x86 so far, I'd be 
fine with you just leaving this patch completely as-is (it does not 
break x86, and I trust you that it makes the test work on s390) and we 
care about making it work (or just making sure it gets skipped) for 
other platforms later on.

Therefore, with the "Signed-off-by" line fixed:

Reviewed-by: Max Reitz <mreitz@redhat.com>

I have further comments below concerning the issue of other platforms 
than pc and s390-virtio, but they don't influence this R-b.

> +        ;;
> +esac
> +
>   $QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
>   
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
>   
>   # Opening a read-only file r/w with snapshot=on
>   chmod u-w "$TEST_IMG"
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
>   chmod u+w "$TEST_IMG"
>   
>   $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
>   
> -echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=off | _filter_qemu_io
> +echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=off | _filter_qemu_io
>   
>   $QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io
>   
> -echo -e 'qemu-io ide0-hd0 "write -P 0x33 0 4k"\ncommit ide0-hd0' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
> +echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
>   
>   $QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io

[snip]

> diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
> index 06e1bb0..1e26c05 100644
> --- a/tests/qemu-iotests/common.filter
> +++ b/tests/qemu-iotests/common.filter
> @@ -154,9 +154,16 @@ _filter_qemu_io()
>           -e "s/qemu-io> //g"
>   }
>   
> +# removes s390 warnings
> +_filter_s390()
> +{
> +    sed -e '/^(qemu) Warning: Orphaned drive without device:.*$/d'
> +}
> +

Hm, I'd rather call it "_filter_orphan" or something because it doesn't 
look to me like this is really s390-specific (we might see the same 
warning on other platforms, too).

Apart from that, I think you should not filter out the (qemu) part (if 
possible) because that is not part of the warning. Since the reference 
output is now used for all non-PC platforms, imagine there being a 
non-s390 platform where this warning does not appear; it will output the 
(qemu) prompt but it won't be filtered and thus the output will be 
different.

>   # replace occurrences of QEMU_PROG with "qemu"
>   _filter_qemu()
>   {
> +    _filter_s390 | \
>       sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
>           -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
>           -e '/main-loop: WARNING: I\/O thread spun for [0-9]\+ iterations/d' \

To simulate a non-s390 platform to test these general reference outputs 
against, you can just use an x86 host and force default_machine to some 
arbitrary value (like "foobar"). This will result in the tests not using 
the PC-specific reference outputs and code paths, and thus give you 
another platform to test these supposedly general reference outputs against.

Max
diff mbox

Patch

diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
index 11c858f..fedf2d4 100755
--- a/tests/qemu-iotests/051
+++ b/tests/qemu-iotests/051
@@ -137,13 +137,19 @@  run_qemu -drive if=ide
 run_qemu -drive if=virtio
 run_qemu -drive if=scsi
 
-run_qemu -drive if=none,id=disk -device ide-cd,drive=disk
-run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-
-run_qemu -drive if=none,id=disk -device ide-drive,drive=disk
-run_qemu -drive if=none,id=disk -device ide-hd,drive=disk
-run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
+case "$QEMU_DEFAULT_MACHINE" in
+    pc)
+        run_qemu -drive if=none,id=disk -device ide-cd,drive=disk
+        run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
+
+        run_qemu -drive if=none,id=disk -device ide-drive,drive=disk
+        run_qemu -drive if=none,id=disk -device ide-hd,drive=disk
+        run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
+        run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
+        ;;
+    *)
+        ;;
+esac
 
 echo
 echo === Read-only ===
@@ -157,13 +163,19 @@  run_qemu -drive file="$TEST_IMG",if=ide,readonly=on
 run_qemu -drive file="$TEST_IMG",if=virtio,readonly=on
 run_qemu -drive file="$TEST_IMG",if=scsi,readonly=on
 
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-cd,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
+case "$QEMU_DEFAULT_MACHINE" in
+    pc)
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-cd,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
 
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-drive,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-hd,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-drive,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-hd,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
+        ;;
+    *)
+        ;;
+esac
 
 echo
 echo === Cache modes ===
@@ -172,12 +184,12 @@  echo
 # Cannot use the test image because cache=none might not work on the host FS
 # Use cdrom so that we won't get errors about missing media
 
-run_qemu -drive media=cdrom,cache=none
-run_qemu -drive media=cdrom,cache=directsync
-run_qemu -drive media=cdrom,cache=writeback
-run_qemu -drive media=cdrom,cache=writethrough
-run_qemu -drive media=cdrom,cache=unsafe
-run_qemu -drive media=cdrom,cache=invalid_value
+run_qemu -drive if=scsi,media=cdrom,cache=none
+run_qemu -drive if=scsi,media=cdrom,cache=directsync
+run_qemu -drive if=scsi,media=cdrom,cache=writeback
+run_qemu -drive if=scsi,media=cdrom,cache=writethrough
+run_qemu -drive if=scsi,media=cdrom,cache=unsafe
+run_qemu -drive if=scsi,media=cdrom,cache=invalid_value
 
 echo
 echo === Specifying the protocol layer ===
@@ -241,28 +253,37 @@  echo
 echo === Snapshot mode ===
 echo
 
+case "$QEMU_DEFAULT_MACHINE" in
+    pc)
+        device_id="ide0-hd0"
+        ;;
+    *)
+        device_id="virtio0"
+        ;;
+esac
+
 $QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
 
 # Opening a read-only file r/w with snapshot=on
 chmod u-w "$TEST_IMG"
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
 chmod u+w "$TEST_IMG"
 
 $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=off | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=off | _filter_qemu_io
 
 $QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io
 
-echo -e 'qemu-io ide0-hd0 "write -P 0x33 0 4k"\ncommit ide0-hd0' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
+echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
 
 $QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io
 
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index f497c57..9e6ea1c 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -5,16 +5,16 @@  Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR
 === Unknown option ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'virtio0' doesn't support the option 'unknown_opt'
 
 
 === Unknown protocol option ===
@@ -49,7 +49,7 @@  QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: could not open
 Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig -nodefaults
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
-ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
+virtio0: TEST_DIR/t.qcow2 (qcow2)
     Cache mode:       writeback
     Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
 (qemu) qququiquit
@@ -99,84 +99,48 @@  QEMU X.Y.Z monitor - type 'help' for more information
 
 Testing: -drive if=floppy
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 Testing: -drive if=ide,media=cdrom
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 Testing: -drive if=scsi,media=cdrom
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 Testing: -drive if=ide
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: Device needs media, but drive is empty
-QEMU_PROG: Device initialization failed.
-QEMU_PROG: Initialization of device ide-hd failed
+qququiquit
 
 Testing: -drive if=virtio
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
 QEMU_PROG: -drive if=virtio: Device initialization failed.
-QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized
+QEMU_PROG: -drive if=virtio: Device 'virtio-blk-s390' could not be initialized
 
 Testing: -drive if=scsi
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
-QEMU_PROG: Device initialization failed.
-QEMU_PROG: Initialization of device lsi53c895a failed
-
-Testing: -drive if=none,id=disk -device ide-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
-
-Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
-
-Testing: -drive if=none,id=disk -device ide-drive,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty
-QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
-
-Testing: -drive if=none,id=disk -device ide-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
-QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
-
-Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty
-QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be initialized
-
-Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
-QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be initialized
+qququiquit
 
 
 === Read-only ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: Can't use a read-only drive
-QEMU_PROG: Device initialization failed.
-QEMU_PROG: Initialization of device ide-hd failed
+qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information
@@ -184,61 +148,33 @@  QEMU X.Y.Z monitor - type 'help' for more information
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
-
-Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
-
-Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
-
-Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
-QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
-
-Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
-QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
-
-Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
-
-Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
 
 === Cache modes ===
 
-Testing: -drive media=cdrom,cache=none
+Testing: -drive if=scsi,media=cdrom,cache=none
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
-Testing: -drive media=cdrom,cache=directsync
+Testing: -drive if=scsi,media=cdrom,cache=directsync
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
-Testing: -drive media=cdrom,cache=writeback
+Testing: -drive if=scsi,media=cdrom,cache=writeback
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
-Testing: -drive media=cdrom,cache=writethrough
+Testing: -drive if=scsi,media=cdrom,cache=writethrough
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
-Testing: -drive media=cdrom,cache=unsafe
+Testing: -drive if=scsi,media=cdrom,cache=unsafe
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+qququiquit
 
-Testing: -drive media=cdrom,cache=invalid_value
-QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid cache option
+Testing: -drive if=scsi,media=cdrom,cache=invalid_value
+QEMU_PROG: -drive if=scsi,media=cdrom,cache=invalid_value: invalid cache option
 
 
 === Specifying the protocol layer ===
@@ -254,25 +190,25 @@  QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk i
 === Leaving out required options ===
 
 Testing: -drive driver=file
-QEMU_PROG: -drive driver=file: could not open disk image ide0-hd0: The 'file' block driver requires a file name
+QEMU_PROG: -drive driver=file: could not open disk image virtio0: The 'file' block driver requires a file name
 
 Testing: -drive driver=nbd
-QEMU_PROG: -drive driver=nbd: could not open disk image ide0-hd0: one of path and host must be specified.
+QEMU_PROG: -drive driver=nbd: could not open disk image virtio0: one of path and host must be specified.
 
 Testing: -drive driver=raw
-QEMU_PROG: -drive driver=raw: could not open disk image ide0-hd0: Can't use 'raw' as a block driver for the protocol level
+QEMU_PROG: -drive driver=raw: could not open disk image virtio0: Can't use 'raw' as a block driver for the protocol level
 
 Testing: -drive file.driver=file
-QEMU_PROG: -drive file.driver=file: could not open disk image ide0-hd0: The 'file' block driver requires a file name
+QEMU_PROG: -drive file.driver=file: could not open disk image virtio0: The 'file' block driver requires a file name
 
 Testing: -drive file.driver=nbd
-QEMU_PROG: -drive file.driver=nbd: could not open disk image ide0-hd0: one of path and host must be specified.
+QEMU_PROG: -drive file.driver=nbd: could not open disk image virtio0: one of path and host must be specified.
 
 Testing: -drive file.driver=raw
-QEMU_PROG: -drive file.driver=raw: could not open disk image ide0-hd0: Can't use 'raw' as a block driver for the protocol level
+QEMU_PROG: -drive file.driver=raw: could not open disk image virtio0: Can't use 'raw' as a block driver for the protocol level
 
 Testing: -drive foo=bar
-QEMU_PROG: -drive foo=bar: could not open disk image ide0-hd0: Must specify either driver or file
+QEMU_PROG: -drive foo=bar: could not open disk image virtio0: Must specify either driver or file
 
 
 === Specifying both an option and its legacy alias ===
@@ -329,7 +265,7 @@  Testing: -drive file=foo:bar
 QEMU_PROG: -drive file=foo:bar: could not open disk image foo:bar: Unknown protocol
 
 Testing: -drive file.filename=foo:bar
-QEMU_PROG: -drive file.filename=foo:bar: could not open disk image ide0-hd0: Could not open 'foo:bar': No such file or directory
+QEMU_PROG: -drive file.filename=foo:bar: could not open disk image virtio0: Could not open 'foo:bar': No such file or directory
 
 Testing: -hda file:TEST_DIR/t.qcow2
 QEMU X.Y.Z monitor - type 'help' for more information
@@ -340,7 +276,7 @@  QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) qququiquit
 
 Testing: -drive file.filename=file:TEST_DIR/t.qcow2
-QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: could not open disk image ide0-hd0: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: could not open disk image virtio0: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
 
 
 === Snapshot mode ===
@@ -349,56 +285,56 @@  wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2 -snapshot
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file=file:TEST_DIR/t.qcow2 -snapshot
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
@@ -407,7 +343,7 @@  read 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x2qemu-io virtio0 "write -P 0x22qemu-io virtio0 "wr!
 ite -P 0x22 qemu-io virtio0 "write -P 0x22 0qemu-io virtio0 "write -P 0x22 0 qemu-io virtio0 "write -P 0x22 0 4qemu-io virtio0 "write -P 0x22 0 4kqemu-io virtio0 "write -P 0x22 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
@@ -416,10 +352,10 @@  read 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
 QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x3qemu-io ide0-hd0 "w!
 rite -P 0x33qemu-io ide0-hd0 "write -P 0x33 qemu-io ide0-hd0 "write -P 0x33 0qemu-io ide0-hd0 "write -P 0x33 0 qemu-io ide0-hd0 "write -P 0x33 0 4qemu-io ide0-hd0 "write -P 0x33 0 4kqemu-io ide0-hd0 "write -P 0x33 0 4k"
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io vqemu-io viqemu-io virqemu-io virtqemu-io virtiqemu-io virtioqemu-io virtio0qemu-io virtio0 qemu-io virtio0 "qemu-io virtio0 "wqemu-io virtio0 "wrqemu-io virtio0 "wriqemu-io virtio0 "writ!
 qemu-io virtio0 "writeqemu-io virtio0 "write qemu-io virtio0 "write -qemu-io virtio0 "write -Pqemu-io virtio0 "write -P qemu-io virtio0 "write -P 0qemu-io virtio0 "write -P 0xqemu-io virtio0 "write -P 0x3qemu-io virtio0 "write -P 0x33qemu-io virtio0 "wr!
 ite -P 0x33 qemu-io virtio0 "write -P 0x33 0qemu-io virtio0 "write -P 0x33 0 qemu-io virtio0 "write -P 0x33 0 4qemu-io virtio0 "write -P 0x33 0 4kqemu-io virtio0 "write -P 0x33 0 4k"
 wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-(qemu) ccocomcommcommicommitcommit commit icommit idcommit idecommit ide0commit ide0-commit ide0-hcommit ide0-hdcommit ide0-hd0
+(qemu) ccocomcommcommicommitcommit commit vcommit vicommit vircommit virtcommit virticommit virtiocommit virtio0
 (qemu) qququiquit
 
 read 4096/4096 bytes at offset 0
diff --git a/tests/qemu-iotests/051.pc.out b/tests/qemu-iotests/051.pc.out
new file mode 100644
index 0000000..395bbc8
--- /dev/null
+++ b/tests/qemu-iotests/051.pc.out
@@ -0,0 +1,427 @@ 
+QA output created by 051
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR/t.IMGFMT.base'
+
+=== Unknown option ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+
+
+=== Unknown protocol option ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+
+
+=== Invalid format ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: 'foo' invalid format
+
+Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: could not open disk image TEST_DIR/t.qcow2: Unknown driver 'foo'
+
+Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: could not open disk image TEST_DIR/t.qcow2: Driver specified twice
+
+
+=== Overriding backing file ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig -nodefaults
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
+ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
+    Cache mode:       writeback
+    Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+
+Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+
+Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+
+
+=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
+
+
+=== With version 2 images enabling lazy refcounts must fail ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could not open disk image TEST_DIR/t.qcow2: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+
+=== No medium ===
+
+Testing: -drive if=floppy
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=ide,media=cdrom
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=scsi,media=cdrom
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=ide
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: Device needs media, but drive is empty
+QEMU_PROG: Device initialization failed.
+QEMU_PROG: Initialization of device ide-hd failed
+
+Testing: -drive if=virtio
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
+QEMU_PROG: -drive if=virtio: Device initialization failed.
+QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized
+
+Testing: -drive if=scsi
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
+QEMU_PROG: Device initialization failed.
+QEMU_PROG: Initialization of device lsi53c895a failed
+
+Testing: -drive if=none,id=disk -device ide-cd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=none,id=disk -device ide-drive,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty
+QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
+QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
+
+Testing: -drive if=none,id=disk -device ide-hd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
+QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
+QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
+
+Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty
+QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be initialized
+
+Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
+QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be initialized
+
+
+=== Read-only ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: Can't use a read-only drive
+QEMU_PROG: Device initialization failed.
+QEMU_PROG: Initialization of device ide-hd failed
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
+QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
+QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
+QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
+QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+
+=== Cache modes ===
+
+Testing: -drive if=scsi,media=cdrom,cache=none
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=directsync
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=writeback
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=writethrough
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=unsafe
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=invalid_value
+QEMU_PROG: -drive if=scsi,media=cdrom,cache=invalid_value: invalid cache option
+
+
+=== Specifying the protocol layer ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device '' doesn't support the option 'filename'
+
+
+=== Leaving out required options ===
+
+Testing: -drive driver=file
+QEMU_PROG: -drive driver=file: could not open disk image ide0-hd0: The 'file' block driver requires a file name
+
+Testing: -drive driver=nbd
+QEMU_PROG: -drive driver=nbd: could not open disk image ide0-hd0: one of path and host must be specified.
+
+Testing: -drive driver=raw
+QEMU_PROG: -drive driver=raw: could not open disk image ide0-hd0: Can't use 'raw' as a block driver for the protocol level
+
+Testing: -drive file.driver=file
+QEMU_PROG: -drive file.driver=file: could not open disk image ide0-hd0: The 'file' block driver requires a file name
+
+Testing: -drive file.driver=nbd
+QEMU_PROG: -drive file.driver=nbd: could not open disk image ide0-hd0: one of path and host must be specified.
+
+Testing: -drive file.driver=raw
+QEMU_PROG: -drive file.driver=raw: could not open disk image ide0-hd0: Can't use 'raw' as a block driver for the protocol level
+
+Testing: -drive foo=bar
+QEMU_PROG: -drive foo=bar: could not open disk image ide0-hd0: Must specify either driver or file
+
+
+=== Specifying both an option and its legacy alias ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time
+
+
+=== Parsing protocol from file name ===
+
+Testing: -hda foo:bar
+QEMU_PROG: -hda foo:bar: could not open disk image foo:bar: Unknown protocol
+
+Testing: -drive file=foo:bar
+QEMU_PROG: -drive file=foo:bar: could not open disk image foo:bar: Unknown protocol
+
+Testing: -drive file.filename=foo:bar
+QEMU_PROG: -drive file.filename=foo:bar: could not open disk image ide0-hd0: Could not open 'foo:bar': No such file or directory
+
+Testing: -hda file:TEST_DIR/t.qcow2
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file.filename=file:TEST_DIR/t.qcow2
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: could not open disk image ide0-hd0: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+
+
+=== Snapshot mode ===
+
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x3qemu-io ide0-hd0 "w!
 rite -P 0x33qemu-io ide0-hd0 "write -P 0x33 qemu-io ide0-hd0 "write -P 0x33 0qemu-io ide0-hd0 "write -P 0x33 0 qemu-io ide0-hd0 "write -P 0x33 0 4qemu-io ide0-hd0 "write -P 0x33 0 4kqemu-io ide0-hd0 "write -P 0x33 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) ccocomcommcommicommitcommit commit icommit idcommit idecommit ide0commit ide0-commit ide0-hcommit ide0-hdcommit ide0-hd0
+(qemu) qququiquit
+
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+*** done
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index 06e1bb0..1e26c05 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -154,9 +154,16 @@  _filter_qemu_io()
         -e "s/qemu-io> //g"
 }
 
+# removes s390 warnings
+_filter_s390()
+{
+    sed -e '/^(qemu) Warning: Orphaned drive without device:.*$/d'
+}
+
 # replace occurrences of QEMU_PROG with "qemu"
 _filter_qemu()
 {
+    _filter_s390 | \
     sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
         -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
         -e '/main-loop: WARNING: I\/O thread spun for [0-9]\+ iterations/d' \