Message ID | 1403696346-9255-1-git-send-email-mst@redhat.com |
---|---|
State | New |
Headers | show |
On 06/25/2014 05:40 AM, Michael S. Tsirkin wrote: > It is necessary to reset RTC interrupt reinjection backlog if > guest time is synchronized via a different mechanism, such as > QGA's guest-set-time command. > > Failing to do so causes both corrections to be applied (summed), > resulting in an incorrect guest time. > > Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > > Marcelo, is this right? > > Changes from v3: > rebase on top of master > fixes error code > drop dead code > > qapi-schema.json | 12 ++++++++++++ > hw/timer/mc146818rtc.c | 18 ++++++++++++++++++ > monitor.c | 7 +++++++ > qmp-commands.hx | 23 +++++++++++++++++++++++ > 4 files changed, 60 insertions(+) Reviewed-by: Eric Blake <eblake@redhat.com>
On Wed, Jun 25, 2014 at 02:40:12PM +0300, Michael S. Tsirkin wrote: > It is necessary to reset RTC interrupt reinjection backlog if > guest time is synchronized via a different mechanism, such as > QGA's guest-set-time command. > > Failing to do so causes both corrections to be applied (summed), > resulting in an incorrect guest time. > > Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > > Marcelo, is this right? > > Changes from v3: > rebase on top of master > fixes error code > drop dead code Yes, sorry about the trouble. Thanks a lot Michael.
On Wed, 25 Jun 2014 14:40:12 +0300 "Michael S. Tsirkin" <mst@redhat.com> wrote: > It is necessary to reset RTC interrupt reinjection backlog if > guest time is synchronized via a different mechanism, such as > QGA's guest-set-time command. > > Failing to do so causes both corrections to be applied (summed), > resulting in an incorrect guest time. > > Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Should this go via qmp tree or are you going to apply it to your tree? > --- > > Marcelo, is this right? > > Changes from v3: > rebase on top of master > fixes error code > drop dead code > > qapi-schema.json | 12 ++++++++++++ > hw/timer/mc146818rtc.c | 18 ++++++++++++++++++ > monitor.c | 7 +++++++ > qmp-commands.hx | 23 +++++++++++++++++++++++ > 4 files changed, 60 insertions(+) > > diff --git a/qapi-schema.json b/qapi-schema.json > index f490403..a282805 100644 > --- a/qapi-schema.json > +++ b/qapi-schema.json > @@ -3288,3 +3288,15 @@ > # Since: 2.1 > ## > { 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } > + > +## > +# @rtc-reset-reinjection > +# > +# This command will reset the RTC interrupt reinjection backlog. > +# Can be used if another mechanism to synchronize guest time > +# is in effect, for example QEMU guest agent's guest-set-time > +# command. > +# > +# Since: 2.1 > +## > +{ 'command': 'rtc-reset-reinjection' } > diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c > index 1201f90..5bd8710 100644 > --- a/hw/timer/mc146818rtc.c > +++ b/hw/timer/mc146818rtc.c > @@ -26,6 +26,7 @@ > #include "sysemu/sysemu.h" > #include "hw/timer/mc146818rtc.h" > #include "qapi/visitor.h" > +#include "qmp-commands.h" > > #ifdef TARGET_I386 > #include "hw/i386/apic.h" > @@ -84,6 +85,7 @@ typedef struct RTCState { > Notifier clock_reset_notifier; > LostTickPolicy lost_tick_policy; > Notifier suspend_notifier; > + QLIST_ENTRY(RTCState) link; > } RTCState; > > static void rtc_set_time(RTCState *s); > @@ -522,6 +524,20 @@ static void rtc_get_time(RTCState *s, struct tm *tm) > rtc_from_bcd(s, s->cmos_data[RTC_CENTURY]) * 100 - 1900; > } > > +static QLIST_HEAD(, RTCState) rtc_devices = > + QLIST_HEAD_INITIALIZER(rtc_devices); > + > +#ifdef TARGET_I386 > +void qmp_rtc_reset_reinjection(Error **errp) > +{ > + RTCState *s; > + > + QLIST_FOREACH(s, &rtc_devices, link) { > + s->irq_coalesced = 0; > + } > +} > +#endif > + > static void rtc_set_time(RTCState *s) > { > struct tm tm; > @@ -910,6 +926,8 @@ ISADevice *rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq) > } else { > isa_init_irq(isadev, &s->irq, RTC_ISA_IRQ); > } > + QLIST_INSERT_HEAD(&rtc_devices, s, link); > + > return isadev; > } > > diff --git a/monitor.c b/monitor.c > index 8c17f89..f7a0206 100644 > --- a/monitor.c > +++ b/monitor.c > @@ -5483,3 +5483,10 @@ QemuOptsList qemu_mon_opts = { > { /* end of list */ } > }, > }; > + > +#ifndef TARGET_I386 > +void qmp_rtc_reset_reinjection(Error **errp) > +{ > + error_set(errp, QERR_FEATURE_DISABLED, "rtc-reset-reinjection"); > +} > +#endif > diff --git a/qmp-commands.hx b/qmp-commands.hx > index e4a1c80..17c09de 100644 > --- a/qmp-commands.hx > +++ b/qmp-commands.hx > @@ -3661,3 +3661,26 @@ Example: > { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0} > ]} > EQMP > + > +#if defined TARGET_I386 > + { > + .name = "rtc-reset-reinjection", > + .args_type = "", > + .mhandler.cmd_new = qmp_marshal_input_rtc_reset_reinjection, > + }, > +#endif > + > +SQMP > +rtc-reset-reinjection > +--------------------- > + > +Reset the RTC interrupt reinjection backlog. > + > +Arguments: None. > + > +Example: > + > +-> { "execute": "rtc-reset-reinjection" } > +<- { "return": {} } > + > +EQMP
On Wed, Jun 25, 2014 at 03:51:30PM -0400, Luiz Capitulino wrote: > On Wed, 25 Jun 2014 14:40:12 +0300 > "Michael S. Tsirkin" <mst@redhat.com> wrote: > > > It is necessary to reset RTC interrupt reinjection backlog if > > guest time is synchronized via a different mechanism, such as > > QGA's guest-set-time command. > > > > Failing to do so causes both corrections to be applied (summed), > > resulting in an incorrect guest time. > > > > Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> > > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > > Should this go via qmp tree or are you going to apply it to your tree? It's applied in my tree. > > --- > > > > Marcelo, is this right? > > > > Changes from v3: > > rebase on top of master > > fixes error code > > drop dead code > > > > qapi-schema.json | 12 ++++++++++++ > > hw/timer/mc146818rtc.c | 18 ++++++++++++++++++ > > monitor.c | 7 +++++++ > > qmp-commands.hx | 23 +++++++++++++++++++++++ > > 4 files changed, 60 insertions(+) > > > > diff --git a/qapi-schema.json b/qapi-schema.json > > index f490403..a282805 100644 > > --- a/qapi-schema.json > > +++ b/qapi-schema.json > > @@ -3288,3 +3288,15 @@ > > # Since: 2.1 > > ## > > { 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } > > + > > +## > > +# @rtc-reset-reinjection > > +# > > +# This command will reset the RTC interrupt reinjection backlog. > > +# Can be used if another mechanism to synchronize guest time > > +# is in effect, for example QEMU guest agent's guest-set-time > > +# command. > > +# > > +# Since: 2.1 > > +## > > +{ 'command': 'rtc-reset-reinjection' } > > diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c > > index 1201f90..5bd8710 100644 > > --- a/hw/timer/mc146818rtc.c > > +++ b/hw/timer/mc146818rtc.c > > @@ -26,6 +26,7 @@ > > #include "sysemu/sysemu.h" > > #include "hw/timer/mc146818rtc.h" > > #include "qapi/visitor.h" > > +#include "qmp-commands.h" > > > > #ifdef TARGET_I386 > > #include "hw/i386/apic.h" > > @@ -84,6 +85,7 @@ typedef struct RTCState { > > Notifier clock_reset_notifier; > > LostTickPolicy lost_tick_policy; > > Notifier suspend_notifier; > > + QLIST_ENTRY(RTCState) link; > > } RTCState; > > > > static void rtc_set_time(RTCState *s); > > @@ -522,6 +524,20 @@ static void rtc_get_time(RTCState *s, struct tm *tm) > > rtc_from_bcd(s, s->cmos_data[RTC_CENTURY]) * 100 - 1900; > > } > > > > +static QLIST_HEAD(, RTCState) rtc_devices = > > + QLIST_HEAD_INITIALIZER(rtc_devices); > > + > > +#ifdef TARGET_I386 > > +void qmp_rtc_reset_reinjection(Error **errp) > > +{ > > + RTCState *s; > > + > > + QLIST_FOREACH(s, &rtc_devices, link) { > > + s->irq_coalesced = 0; > > + } > > +} > > +#endif > > + > > static void rtc_set_time(RTCState *s) > > { > > struct tm tm; > > @@ -910,6 +926,8 @@ ISADevice *rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq) > > } else { > > isa_init_irq(isadev, &s->irq, RTC_ISA_IRQ); > > } > > + QLIST_INSERT_HEAD(&rtc_devices, s, link); > > + > > return isadev; > > } > > > > diff --git a/monitor.c b/monitor.c > > index 8c17f89..f7a0206 100644 > > --- a/monitor.c > > +++ b/monitor.c > > @@ -5483,3 +5483,10 @@ QemuOptsList qemu_mon_opts = { > > { /* end of list */ } > > }, > > }; > > + > > +#ifndef TARGET_I386 > > +void qmp_rtc_reset_reinjection(Error **errp) > > +{ > > + error_set(errp, QERR_FEATURE_DISABLED, "rtc-reset-reinjection"); > > +} > > +#endif > > diff --git a/qmp-commands.hx b/qmp-commands.hx > > index e4a1c80..17c09de 100644 > > --- a/qmp-commands.hx > > +++ b/qmp-commands.hx > > @@ -3661,3 +3661,26 @@ Example: > > { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0} > > ]} > > EQMP > > + > > +#if defined TARGET_I386 > > + { > > + .name = "rtc-reset-reinjection", > > + .args_type = "", > > + .mhandler.cmd_new = qmp_marshal_input_rtc_reset_reinjection, > > + }, > > +#endif > > + > > +SQMP > > +rtc-reset-reinjection > > +--------------------- > > + > > +Reset the RTC interrupt reinjection backlog. > > + > > +Arguments: None. > > + > > +Example: > > + > > +-> { "execute": "rtc-reset-reinjection" } > > +<- { "return": {} } > > + > > +EQMP
diff --git a/qapi-schema.json b/qapi-schema.json index f490403..a282805 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -3288,3 +3288,15 @@ # Since: 2.1 ## { 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } + +## +# @rtc-reset-reinjection +# +# This command will reset the RTC interrupt reinjection backlog. +# Can be used if another mechanism to synchronize guest time +# is in effect, for example QEMU guest agent's guest-set-time +# command. +# +# Since: 2.1 +## +{ 'command': 'rtc-reset-reinjection' } diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c index 1201f90..5bd8710 100644 --- a/hw/timer/mc146818rtc.c +++ b/hw/timer/mc146818rtc.c @@ -26,6 +26,7 @@ #include "sysemu/sysemu.h" #include "hw/timer/mc146818rtc.h" #include "qapi/visitor.h" +#include "qmp-commands.h" #ifdef TARGET_I386 #include "hw/i386/apic.h" @@ -84,6 +85,7 @@ typedef struct RTCState { Notifier clock_reset_notifier; LostTickPolicy lost_tick_policy; Notifier suspend_notifier; + QLIST_ENTRY(RTCState) link; } RTCState; static void rtc_set_time(RTCState *s); @@ -522,6 +524,20 @@ static void rtc_get_time(RTCState *s, struct tm *tm) rtc_from_bcd(s, s->cmos_data[RTC_CENTURY]) * 100 - 1900; } +static QLIST_HEAD(, RTCState) rtc_devices = + QLIST_HEAD_INITIALIZER(rtc_devices); + +#ifdef TARGET_I386 +void qmp_rtc_reset_reinjection(Error **errp) +{ + RTCState *s; + + QLIST_FOREACH(s, &rtc_devices, link) { + s->irq_coalesced = 0; + } +} +#endif + static void rtc_set_time(RTCState *s) { struct tm tm; @@ -910,6 +926,8 @@ ISADevice *rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq) } else { isa_init_irq(isadev, &s->irq, RTC_ISA_IRQ); } + QLIST_INSERT_HEAD(&rtc_devices, s, link); + return isadev; } diff --git a/monitor.c b/monitor.c index 8c17f89..f7a0206 100644 --- a/monitor.c +++ b/monitor.c @@ -5483,3 +5483,10 @@ QemuOptsList qemu_mon_opts = { { /* end of list */ } }, }; + +#ifndef TARGET_I386 +void qmp_rtc_reset_reinjection(Error **errp) +{ + error_set(errp, QERR_FEATURE_DISABLED, "rtc-reset-reinjection"); +} +#endif diff --git a/qmp-commands.hx b/qmp-commands.hx index e4a1c80..17c09de 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -3661,3 +3661,26 @@ Example: { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0} ]} EQMP + +#if defined TARGET_I386 + { + .name = "rtc-reset-reinjection", + .args_type = "", + .mhandler.cmd_new = qmp_marshal_input_rtc_reset_reinjection, + }, +#endif + +SQMP +rtc-reset-reinjection +--------------------- + +Reset the RTC interrupt reinjection backlog. + +Arguments: None. + +Example: + +-> { "execute": "rtc-reset-reinjection" } +<- { "return": {} } + +EQMP