diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 1cbb58f..9bb3076 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -54,3 +54,4 @@ obj-y += fttsc010.o
 obj-y += ftsdc010.o
 obj-y += ftmac110.o
 obj-y += fttmr010.o
+obj-y += ftspi020.o
diff --git a/hw/arm/faraday_a369.c b/hw/arm/faraday_a369.c
index 0e75b02..5d66b31 100644
--- a/hw/arm/faraday_a369.c
+++ b/hw/arm/faraday_a369.c
@@ -83,6 +83,22 @@ a369_board_init(QEMUMachineInitArgs *args)
     sysbus_connect_irq(SYS_BUS_DEVICE(ds), 1, s->pic[6]);
     sysbus_connect_irq(SYS_BUS_DEVICE(ds), 2, s->pic[7]);
 
+    /* SPI: FTSPI020 */
+    ds = sysbus_create_simple("ftspi020", 0xC0000000, s->pic[4]);
+    s->spi_fl[0] = ds;
+
+    /* Attach the spi flash to ftspi020.0 */
+    nr_flash = 1;
+    for (i = 0; i < nr_flash; i++) {
+        SSIBus *ssi = (SSIBus *)qdev_get_child_bus(s->spi_fl[0], "spi");
+        DeviceState *fl = ssi_create_slave_no_init(ssi, "w25q64");
+        qemu_irq cs_line;
+
+        qdev_init_nofail(fl);
+        cs_line = qdev_get_gpio_in(fl, 0);
+        sysbus_connect_irq(SYS_BUS_DEVICE(s->spi_fl[0]), i + 1, cs_line);
+    }
+
     /* System start-up */
 
     if (args->kernel_filename) {
diff --git a/hw/arm/ftspi020.c b/hw/arm/ftspi020.c
new file mode 100644
index 0000000..d61cca7
--- /dev/null
+++ b/hw/arm/ftspi020.c
@@ -0,0 +1,340 @@
+/*
+ * Faraday FTSPI020 Flash Controller
+ *
+ * Copyright (c) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This code is licensed under GNU GPL v2+.
+ */
+
+#include "hw/hw.h"
+#include "sysemu/sysemu.h"
+#include "hw/sysbus.h"
+#include "hw/ssi.h"
+
+#include "ftspi020.h"
+
+#define TYPE_FTSPI020   "ftspi020"
+
+typedef struct Ftspi020State {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    qemu_irq irq;
+
+    /* DMA hardware handshake */
+    qemu_irq req;
+
+    SSIBus *spi;
+    qemu_irq *cs_lines;
+
+    int wip;    /* SPI Flash Status: Write In Progress BIT shift */
+
+    /* HW register caches */
+    uint32_t cmd[4];
+    uint32_t ctrl;
+    uint32_t timing;
+    uint32_t icr;
+    uint32_t isr;
+    uint32_t rdsr;
+} Ftspi020State;
+
+#define FTSPI020(obj) \
+    OBJECT_CHECK(Ftspi020State, obj, TYPE_FTSPI020)
+
+static void ftspi020_update_irq(Ftspi020State *s)
+{
+    qemu_set_irq(s->irq, s->isr ? 1 : 0);
+}
+
+static void ftspi020_handle_ack(void *opaque, int line, int level)
+{
+    Ftspi020State *s = FTSPI020(opaque);
+
+    if (!(s->icr & ICR_DMA)) {
+        return;
+    }
+
+    if (level) {
+        qemu_set_irq(s->req, 0);
+    } else if (s->cmd[2]) {
+        qemu_set_irq(s->req, 1);
+    }
+}
+
+static int ftspi020_do_command(Ftspi020State *s)
+{
+    uint32_t cs   = extract32(s->cmd[3],  8, 2);
+    uint32_t cmd  = extract32(s->cmd[3], 24, 8);
+    uint32_t ilen = extract32(s->cmd[1], 24, 2);
+    uint32_t alen = extract32(s->cmd[1],  0, 3);
+    uint32_t dcyc = extract32(s->cmd[1], 16, 8);
+
+    if (dcyc % 8) {
+        fprintf(stderr, "ftspi020: bad dummy clock (%u) to QEMU\n", dcyc);
+        exit(1);
+    }
+
+    /* activate the spi flash */
+    qemu_set_irq(s->cs_lines[cs], 0);
+
+    /* if it's a SPI flash READ_STATUS command */
+    if ((s->cmd[3] & (CMD3_RDSR | CMD3_WRITE)) == CMD3_RDSR) {
+        uint32_t rdsr;
+
+        ssi_transfer(s->spi, cmd);
+        do {
+            rdsr = ssi_transfer(s->spi, 0x00);
+            if (s->cmd[3] & CMD3_RDSR_SW) {
+                break;
+            }
+        } while (rdsr & (1 << s->wip));
+        s->rdsr = rdsr;
+    } else {
+    /* otherwise */
+        int i;
+
+        ilen = MIN(ilen, 2);
+        alen = MIN(alen, 4);
+
+        /* command cycles */
+        for (i = 0; i < ilen; ++i) {
+            ssi_transfer(s->spi, cmd);
+        }
+        /* address cycles */
+        for (i = alen - 1; i >= 0; --i) {
+            ssi_transfer(s->spi, extract32(s->cmd[0], i * 8, 8));
+        }
+        /* dummy cycles */
+        for (i = 0; i < (dcyc >> 3); ++i) {
+            ssi_transfer(s->spi, 0x00);
+        }
+    }
+
+    if (!s->cmd[2]) {
+        qemu_set_irq(s->cs_lines[cs], 1);
+    } else if (s->icr & ICR_DMA) {
+        qemu_set_irq(s->req, 1);
+    }
+
+    if (s->cmd[3] & CMD3_INTR) {
+        s->isr |= ISR_CMDFIN;
+    }
+    ftspi020_update_irq(s);
+
+    return 0;
+}
+
+static void ftspi020_chip_reset(Ftspi020State *s)
+{
+    int i;
+
+    for (i = 0; i < 4; ++i) {
+        s->cmd[i] = 0;
+    }
+    s->wip = 0;
+    s->ctrl = 0;
+    s->timing = 0;
+    s->icr = 0;
+    s->isr = 0;
+    s->rdsr = 0;
+
+    qemu_set_irq(s->irq, 0);
+
+    for (i = 0; i < CFG_NR_CSLINES; ++i) {
+        /* de-activate the spi flash */
+        qemu_set_irq(s->cs_lines[i], 1);
+    }
+}
+
+static uint64_t
+ftspi020_mem_read(void *opaque, hwaddr addr, unsigned size)
+{
+    Ftspi020State *s = FTSPI020(opaque);
+    uint64_t ret = 0;
+
+    switch (addr) {
+    case REG_CMD0 ... REG_CMD3:
+        return s->cmd[(addr - REG_CMD0) / 4];
+    case REG_CR:
+        return s->ctrl;
+    case REG_TR:
+        return s->timing;
+    case REG_SR:
+        /* In QEMU, the data fifo is always ready for read/write */
+        return SR_RX_READY | SR_TX_READY;
+    case REG_ISR:
+        return s->isr;
+    case REG_ICR:
+        return s->icr;
+    case REG_RDSR:
+        return s->rdsr;
+    case REG_REVR:
+        return 0x00010001;  /* rev. 1.0.1 */
+    case REG_FEAR:
+        return FEAR_CLKM_SYNC
+            | FEAR_CMDQ(2) | FEAR_RXFIFO(32) | FEAR_TXFIFO(32);
+    case REG_DR:
+        if (!(s->cmd[3] & CMD3_WRITE)) {
+            int i;
+            uint32_t cs = extract32(s->cmd[3], 8, 2);
+            for (i = 0; i < 4 && s->cmd[2]; i++, s->cmd[2]--) {
+                ret = deposit32(ret, i * 8, 8,
+                    ssi_transfer(s->spi, 0x00) & 0xff);
+            }
+            if (!s->cmd[2]) {
+                qemu_set_irq(s->cs_lines[cs], 1);
+                if (s->cmd[3] & CMD3_INTR) {
+                    s->isr |= ISR_CMDFIN;
+                }
+                ftspi020_update_irq(s);
+            }
+        }
+        break;
+        /* we don't care */
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+            "ftspi020: undefined memory access@%#" HWADDR_PRIx "\n", addr);
+        break;
+    }
+
+    return ret;
+}
+
+static void
+ftspi020_mem_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    Ftspi020State *s = FTSPI020(opaque);
+
+    switch (addr) {
+    case REG_CMD0 ... REG_CMD2:
+        s->cmd[(addr - REG_CMD0) / 4] = (uint32_t)val;
+        break;
+    case REG_CMD3:
+        s->cmd[3] = (uint32_t)val;
+        ftspi020_do_command(s);
+        break;
+    case REG_CR:
+        if (val & CR_ABORT) {
+            ftspi020_chip_reset(s);
+            val &= ~CR_ABORT;
+        }
+        s->ctrl = (uint32_t)val;
+        s->wip  = extract32(val, 16, 3);
+        break;
+    case REG_TR:
+        s->timing = (uint32_t)val;
+        break;
+    case REG_DR:
+        if (s->cmd[3] & CMD3_WRITE) {
+            int i;
+            uint32_t cs = extract32(s->cmd[3], 8, 2);
+            for (i = 0; i < 4 && s->cmd[2]; i++, s->cmd[2]--) {
+                ssi_transfer(s->spi, extract32((uint32_t)val, i * 8, 8));
+            }
+            if (!s->cmd[2]) {
+                qemu_set_irq(s->cs_lines[cs], 1);
+                if (s->cmd[3] & CMD3_INTR) {
+                    s->isr |= ISR_CMDFIN;
+                }
+                ftspi020_update_irq(s);
+            }
+        }
+        break;
+    case REG_ISR:
+        s->isr &= ~((uint32_t)val);
+        ftspi020_update_irq(s);
+        break;
+    case REG_ICR:
+        s->icr = (uint32_t)val;
+        break;
+        /* we don't care */
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+            "ftspi020: undefined memory access@%#" HWADDR_PRIx "\n", addr);
+        break;
+    }
+}
+
+static const MemoryRegionOps mmio_ops = {
+    .read  = ftspi020_mem_read,
+    .write = ftspi020_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    }
+};
+
+static void ftspi020_reset(DeviceState *ds)
+{
+    Ftspi020State *s = FTSPI020(SYS_BUS_DEVICE(ds));
+
+    ftspi020_chip_reset(s);
+}
+
+static int ftspi020_init(SysBusDevice *dev)
+{
+    Ftspi020State *s = FTSPI020(dev);
+    int i;
+
+    memory_region_init_io(&s->iomem,
+                          &mmio_ops,
+                          s,
+                          TYPE_FTSPI020,
+                          0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    sysbus_init_irq(dev, &s->irq);
+
+    s->spi = ssi_create_bus(&dev->qdev, "spi");
+    s->cs_lines = g_new0(qemu_irq, CFG_NR_CSLINES);
+    ssi_auto_connect_slaves(DEVICE(s), s->cs_lines, s->spi);
+    for (i = 0; i < CFG_NR_CSLINES; ++i) {
+        sysbus_init_irq(dev, &s->cs_lines[i]);
+    }
+
+    qdev_init_gpio_in(&s->busdev.qdev, ftspi020_handle_ack, 1);
+    qdev_init_gpio_out(&s->busdev.qdev, &s->req, 1);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_ftspi020 = {
+    .name = TYPE_FTSPI020,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(cmd, Ftspi020State, 4),
+        VMSTATE_UINT32(ctrl, Ftspi020State),
+        VMSTATE_UINT32(timing, Ftspi020State),
+        VMSTATE_UINT32(icr, Ftspi020State),
+        VMSTATE_UINT32(isr, Ftspi020State),
+        VMSTATE_UINT32(rdsr, Ftspi020State),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void ftspi020_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    k->init     = ftspi020_init;
+    dc->vmsd    = &vmstate_ftspi020;
+    dc->reset   = ftspi020_reset;
+    dc->no_user = 1;
+}
+
+static const TypeInfo ftspi020_info = {
+    .name          = TYPE_FTSPI020,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(Ftspi020State),
+    .class_init    = ftspi020_class_init,
+};
+
+static void ftspi020_register_types(void)
+{
+    type_register_static(&ftspi020_info);
+}
+
+type_init(ftspi020_register_types)
diff --git a/hw/arm/ftspi020.h b/hw/arm/ftspi020.h
new file mode 100644
index 0000000..47b5d2e
--- /dev/null
+++ b/hw/arm/ftspi020.h
@@ -0,0 +1,81 @@
+/*
+ * Faraday FTSPI020 Flash Controller
+ *
+ * Copyright (c) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This code is licensed under GNU GPL v2+.
+ */
+
+#ifndef HW_ARM_FTSPI020_H
+#define HW_ARM_FTSPI020_H
+
+#include "qemu/bitops.h"
+
+/* Number of CS lines */
+#define CFG_NR_CSLINES      4
+
+/******************************************************************************
+ * FTSPI020 registers
+ *****************************************************************************/
+#define REG_CMD0            0x00    /* Flash address */
+#define REG_CMD1            0x04
+#define REG_CMD2            0x08    /* Flash data counter */
+#define REG_CMD3            0x0c
+#define REG_CR              0x10    /* Control Register */
+#define REG_TR              0x14    /* AC Timing Register */
+#define REG_SR              0x18    /* Status Register */
+#define REG_ICR             0x20    /* Interrupt Control Register */
+#define REG_ISR             0x24    /* Interrupt Status Register */
+#define REG_RDSR            0x28    /* Read Status Register */
+#define REG_REVR            0x50    /* Revision Register */
+#define REG_FEAR            0x54    /* Feature Register */
+#define REG_DR              0x100   /* Data Register */
+
+#define CMD1_CTRD           BIT(28) /* Enable 1 byte continuous read */
+#define CMD1_INST_LEN(x)    (((x) & 0x03) << 24)/* instruction length */
+#define CMD1_DCLK_LEN(x)    (((x) & 0xff) << 16)/* dummy clock length */
+#define CMD1_ADDR_LEN(x)    (((x) & 0x07) << 0) /* address length */
+
+#define CMD3_INST_OPC(x)    (((x) & 0xff) << 24)/* instruction op code */
+#define CMD3_CTRD_OPC(x)    (((x) & 0xff) << 16)/* cont. read op code */
+#define CMD3_CS(x)          (((x) & 0x0f) << 8) /* chip select */
+#define CMD3_OPM_STD        (0)         /* standard 1-bit serial mode */
+#define CMD3_OPM_DUAL       (1 << 5)    /* fast read dual */
+#define CMD3_OPM_QUAD       (2 << 5)    /* fast read quad */
+#define CMD3_OPM_DUALIO     (3 << 5)    /* fast read dual io */
+#define CMD3_OPM_QUADIO     (4 << 5)    /* fast read quad io */
+#define CMD3_DTR            BIT(4)  /* Enable double transfer rate */
+#define CMD3_RDSR_HW        (0)     /* Enable HW polling RDSR */
+#define CMD3_RDSR_SW        BIT(3)  /* Disable HW polling RDSR */
+#define CMD3_RDSR           BIT(2)  /* Indicate it's a RDSR command */
+#define CMD3_READ           0       /* Indicate it's a read command */
+#define CMD3_WRITE          BIT(1)  /* Indicate it's a write command */
+#define CMD3_INTR           BIT(0)  /* Enable interrupt and status update */
+
+#define CR_BUSYBIT(x)       (((x) & 0x07) << 16) /* Busy bit in the RDSR */
+#define CR_ABORT            BIT(8)
+#define CR_MODE0            0       /* SPI MODE0 */
+#define CR_MODE3            BIT(4)  /* SPI MODE3 */
+#define CR_CLKDIV(n)        ((n) & 0x03)    /* Clock divider = 2 * (n + 1) */
+
+#define TR_TRACE(x)         (((x) & 0x0f) << 4) /* trace delay */
+#define TR_CS(x)            (((x) & 0x0f) << 0) /* cs delay */
+
+#define SR_RX_READY         BIT(1)  /* Rx Ready */
+#define SR_TX_READY         BIT(0)  /* Tx Ready */
+
+#define ICR_RX_THRES(x)     (((x) & 0x03) << 12)/* rx interrupt threshold */
+#define ICR_TX_THRES(x)     (((x) & 0x03) << 8) /* tx interrupt threshold */
+#define ICR_DMA             BIT(0)  /* Enable DMA HW handshake */
+
+#define ISR_CMDFIN          BIT(0)  /* Command finished interrupt */
+
+#define FEAR_CLKM_BYPORT    0       /* clock mode = byport */
+#define FEAR_CLKM_SYNC      BIT(25) /* clock mode = sync */
+#define FEAR_SUPP_DTR       BIT(24) /* support double transfer rate */
+#define FEAR_CMDQ(x)        (((x) & 0x07) << 16)    /* cmd queue depth */
+#define FEAR_RXFIFO(x)      (((x) & 0xff) << 8)     /* rx fifo depth */
+#define FEAR_TXFIFO(x)      (((x) & 0xff) << 0)     /* tx fifo depth */
+
+#endif  /* HW_ARM_FTSPI020_H */
