diff mbox

[12/18] virtio-blk: add x-data-plane=on|off performance feature

Message ID 1357139756-11951-13-git-send-email-stefanha@redhat.com
State New
Headers show

Commit Message

Stefan Hajnoczi Jan. 2, 2013, 3:15 p.m. UTC
The virtio-blk-data-plane feature is easy to integrate into
hw/virtio-blk.c.  The data plane can be started and stopped similar to
vhost-net.

Users can take advantage of the virtio-blk-data-plane feature using the
new -device virtio-blk-pci,x-data-plane=on property.

The x-data-plane name was chosen because at this stage the feature is
experimental and likely to see changes in the future.

If the VM configuration does not support virtio-blk-data-plane an error
message is printed.  Although we could fall back to regular virtio-blk,
I prefer the explicit approach since it prompts the user to fix their
configuration if they want the performance benefit of
virtio-blk-data-plane.

Limitations:
 * Only format=raw is supported
 * Live migration is not supported
 * Block jobs, hot unplug, and other operations fail with -EBUSY
 * I/O throttling limits are ignored
 * Only Linux hosts are supported due to Linux AIO usage

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/virtio-blk.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
 hw/virtio-pci.c |  3 +++
 2 files changed, 46 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
index f004148..92c745a 100644
--- a/hw/virtio-blk.c
+++ b/hw/virtio-blk.c
@@ -17,6 +17,9 @@ 
 #include "hw/block-common.h"
 #include "sysemu/blockdev.h"
 #include "virtio-blk.h"
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+#include "hw/dataplane/virtio-blk.h"
+#endif
 #include "scsi-defs.h"
 #ifdef __linux__
 # include <scsi/sg.h>
@@ -33,6 +36,9 @@  typedef struct VirtIOBlock
     VirtIOBlkConf *blk;
     unsigned short sector_mask;
     DeviceState *qdev;
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    VirtIOBlockDataPlane *dataplane;
+#endif
 } VirtIOBlock;
 
 static VirtIOBlock *to_virtio_blk(VirtIODevice *vdev)
@@ -407,6 +413,16 @@  static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
         .num_writes = 0,
     };
 
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    /* Some guests kick before setting VIRTIO_CONFIG_S_DRIVER_OK so start
+     * dataplane here instead of waiting for .set_status().
+     */
+    if (s->dataplane) {
+        virtio_blk_data_plane_start(s->dataplane);
+        return;
+    }
+#endif
+
     while ((req = virtio_blk_get_request(s))) {
         virtio_blk_handle_request(req, &mrb);
     }
@@ -446,8 +462,9 @@  static void virtio_blk_dma_restart_cb(void *opaque, int running,
 {
     VirtIOBlock *s = opaque;
 
-    if (!running)
+    if (!running) {
         return;
+    }
 
     if (!s->bh) {
         s->bh = qemu_bh_new(virtio_blk_dma_restart_bh, s);
@@ -457,6 +474,14 @@  static void virtio_blk_dma_restart_cb(void *opaque, int running,
 
 static void virtio_blk_reset(VirtIODevice *vdev)
 {
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    VirtIOBlock *s = to_virtio_blk(vdev);
+
+    if (s->dataplane) {
+        virtio_blk_data_plane_stop(s->dataplane);
+    }
+#endif
+
     /*
      * This should cancel pending requests, but can't do nicely until there
      * are per-device request lists.
@@ -541,6 +566,12 @@  static void virtio_blk_set_status(VirtIODevice *vdev, uint8_t status)
     VirtIOBlock *s = to_virtio_blk(vdev);
     uint32_t features;
 
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    if (s->dataplane && !(status & VIRTIO_CONFIG_S_DRIVER)) {
+        virtio_blk_data_plane_stop(s->dataplane);
+    }
+#endif
+
     if (!(status & VIRTIO_CONFIG_S_DRIVER_OK)) {
         return;
     }
@@ -638,6 +669,12 @@  VirtIODevice *virtio_blk_init(DeviceState *dev, VirtIOBlkConf *blk)
     s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
 
     s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    if (!virtio_blk_data_plane_create(&s->vdev, blk, &s->dataplane)) {
+        virtio_cleanup(&s->vdev);
+        return NULL;
+    }
+#endif
 
     qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
     s->qdev = dev;
@@ -655,6 +692,11 @@  VirtIODevice *virtio_blk_init(DeviceState *dev, VirtIOBlkConf *blk)
 void virtio_blk_exit(VirtIODevice *vdev)
 {
     VirtIOBlock *s = to_virtio_blk(vdev);
+
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    virtio_blk_data_plane_destroy(s->dataplane);
+    s->dataplane = NULL;
+#endif
     unregister_savevm(s->qdev, "virtio-blk", s);
     blockdev_mark_auto_del(s->bs);
     virtio_cleanup(vdev);
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 3cab783..82761cf 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -896,6 +896,9 @@  static Property virtio_blk_properties[] = {
 #endif
     DEFINE_PROP_BIT("config-wce", VirtIOPCIProxy, blk.config_wce, 0, true),
     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
+#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
+    DEFINE_PROP_BIT("x-data-plane", VirtIOPCIProxy, blk.data_plane, 0, false),
+#endif
     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
     DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features),
     DEFINE_PROP_END_OF_LIST(),