diff mbox

[15/26] fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfers

Message ID 1352918847-3696-16-git-send-email-kwolf@redhat.com
State New
Headers show

Commit Message

Kevin Wolf Nov. 14, 2012, 6:47 p.m. UTC 
From: Hervé Poussineau <hpoussin@reactos.org>

On non-DMA transfers, fdctrl_stop_transfer() used to set FD_SR0_SEEK
no matter if there actually was a seek or not. This is obviously wrong.

fdctrl_seek_to_next_sect() has this information because it performs
the seek itself.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 hw/fdc.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/hw/fdc.c b/hw/fdc.c
index 7e4b0ce..e47050f 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -1123,11 +1123,13 @@  static int fdctrl_seek_to_next_sect(FDCtrl *fdctrl, FDrive *cur_drv)
             } else {
                 new_head = 0;
                 new_track++;
+                fdctrl->status0 |= FD_SR0_SEEK;
                 if ((cur_drv->flags & FDISK_DBL_SIDES) == 0) {
                     ret = 0;
                 }
             }
         } else {
+            fdctrl->status0 |= FD_SR0_SEEK;
             new_track++;
             ret = 0;
         }
@@ -1458,7 +1460,7 @@  static uint32_t fdctrl_read_data(FDCtrl *fdctrl)
          * then from status mode to command mode
          */
         if (fdctrl->msr & FD_MSR_NONDMA) {
-            fdctrl_stop_transfer(fdctrl, FD_SR0_SEEK, 0x00, 0x00);
+            fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
         } else {
             fdctrl_reset_fifo(fdctrl);
             fdctrl_reset_irq(fdctrl);
@@ -1922,7 +1924,7 @@  static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value)
          * then from status mode to command mode
          */
         if (fdctrl->data_pos == fdctrl->data_len)
-            fdctrl_stop_transfer(fdctrl, FD_SR0_SEEK, 0x00, 0x00);
+            fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
         return;
     }
     if (fdctrl->data_pos == 0) {