diff mbox

[4/4] hw/arm11mpcore: Fix broken realview_mpcore/arm11mpcore_priv properties

Message ID 1330690025-7611-5-git-send-email-peter.maydell@linaro.org
State New
Headers show

Commit Message

Peter Maydell March 2, 2012, 12:07 p.m. UTC 
Fix confusion in the Property arrays for the "arm11mpcore_priv"
(per-CPU devices for the ARM11MPcore CPU) and "realview_mpcore"
(realview-eb board specific device encapsulating CPU and some
extra interrupt controllers) -- the num-irq property was defined
on the wrong device and the mpcore_rirq_properties were defined
as offsets in the wrong structure. The effect was that the
realview-eb-mpcore machine would abort on startup trying to
allocate an insane amount of memory. (This bug was introduced in
the QOM conversion in commit 999e12bb.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm11mpcore.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/hw/arm11mpcore.c b/hw/arm11mpcore.c
index 102348b..c67b70f 100644
--- a/hw/arm11mpcore.c
+++ b/hw/arm11mpcore.c
@@ -202,16 +202,7 @@  static int realview_mpcore_init(SysBusDevice *dev)
 }
 
 static Property mpcore_rirq_properties[] = {
-    DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
-    /* The ARM11 MPCORE TRM says the on-chip controller may have
-     * anything from 0 to 224 external interrupt IRQ lines (with another
-     * 32 internal). We default to 32+32, which is the number provided by
-     * the ARM11 MPCore test chip in the Realview Versatile Express
-     * coretile. Other boards may differ and should set this property
-     * appropriately. Some Linux kernels may not boot if the hardware
-     * has more IRQ lines than the kernel expects.
-     */
-    DEFINE_PROP_UINT32("num-irq", mpcore_priv_state, num_irq, 64),
+    DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -233,6 +224,15 @@  static TypeInfo mpcore_rirq_info = {
 
 static Property mpcore_priv_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
+    /* The ARM11 MPCORE TRM says the on-chip controller may have
+     * anything from 0 to 224 external interrupt IRQ lines (with another
+     * 32 internal). We default to 32+32, which is the number provided by
+     * the ARM11 MPCore test chip in the Realview Versatile Express
+     * coretile. Other boards may differ and should set this property
+     * appropriately. Some Linux kernels may not boot if the hardware
+     * has more IRQ lines than the kernel expects.
+     */
+    DEFINE_PROP_UINT32("num-irq", mpcore_priv_state, num_irq, 64),
     DEFINE_PROP_END_OF_LIST(),
 };