diff mbox

[11/18] Fix typos in comments (interupt -> interrupt)

Message ID 1304004042-8334-11-git-send-email-weil@mail.berlios.de
State Accepted
Headers show

Commit Message

Stefan Weil April 28, 2011, 3:20 p.m. UTC
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
---
 cpu-exec.c                   |    2 +-
 hw/mst_fpga.c                |    2 +-
 hw/pl031.c                   |    2 +-
 hw/pl061.c                   |    4 ++--
 target-mips/translate_init.c |    2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/cpu-exec.c b/cpu-exec.c
index 395cd8c..2cdcdc5 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -569,7 +569,7 @@  int cpu_exec(CPUState *env1)
                         next_tb = 0;
                     }
 #endif
-                   /* Don't use the cached interupt_request value,
+                   /* Don't use the cached interrupt_request value,
                       do_interrupt may have updated the EXITTB flag. */
                     if (env->interrupt_request & CPU_INTERRUPT_EXITTB) {
                         env->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
diff --git a/hw/mst_fpga.c b/hw/mst_fpga.c
index a04355c..4e47574 100644
--- a/hw/mst_fpga.c
+++ b/hw/mst_fpga.c
@@ -154,7 +154,7 @@  mst_fpga_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
 	case MST_MSCRD:
 		s->mscrd =  value;
 		break;
-	case MST_INTMSKENA:	/* Mask interupt */
+	case MST_INTMSKENA:	/* Mask interrupt */
 		s->intmskena = (value & 0xFEEFF);
 		qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
 		break;
diff --git a/hw/pl031.c b/hw/pl031.c
index 8c2f9d0..017a313 100644
--- a/hw/pl031.c
+++ b/hw/pl031.c
@@ -161,7 +161,7 @@  static void pl031_write(void * opaque, target_phys_addr_t offset,
         pl031_update(s);
         break;
     case RTC_ICR:
-        /* The PL031 documentation (DDI0224B) states that the interupt is
+        /* The PL031 documentation (DDI0224B) states that the interrupt is
            cleared when bit 0 of the written value is set.  However the
            arm926e documentation (DDI0287B) states that the interrupt is
            cleared when any value is written.  */
diff --git a/hw/pl061.c b/hw/pl061.c
index 2e181f8..372dfc2 100644
--- a/hw/pl061.c
+++ b/hw/pl061.c
@@ -98,7 +98,7 @@  static uint32_t pl061_read(void *opaque, target_phys_addr_t offset)
         return s->isense;
     case 0x408: /* Interrupt both edges */
         return s->ibe;
-    case 0x40c: /* Interupt event */
+    case 0x40c: /* Interrupt event */
         return s->iev;
     case 0x410: /* Interrupt mask */
         return s->im;
@@ -156,7 +156,7 @@  static void pl061_write(void *opaque, target_phys_addr_t offset,
     case 0x408: /* Interrupt both edges */
         s->ibe = value;
         break;
-    case 0x40c: /* Interupt event */
+    case 0x40c: /* Interrupt event */
         s->iev = value;
         break;
     case 0x410: /* Interrupt mask */
diff --git a/target-mips/translate_init.c b/target-mips/translate_init.c
index 590e092..d980216 100644
--- a/target-mips/translate_init.c
+++ b/target-mips/translate_init.c
@@ -38,7 +38,7 @@ 
 ((1 << CP0C2_M))
 
 /* No config4, no DSP ASE, no large physaddr (PABITS),
-   no external interrupt controller, no vectored interupts,
+   no external interrupt controller, no vectored interrupts,
    no 1kb pages, no SmartMIPS ASE, no trace logic */
 #define MIPS_CONFIG3                                              \
 ((0 << CP0C3_M) | (0 << CP0C3_DSPP) | (0 << CP0C3_LPA) |          \