| Message ID | 1255069742-15724-19-git-send-email-yamahata@valinux.co.jp |
|---|---|
| State | Under Review |
| Headers | show |
On Fri, Oct 09, 2009 at 03:28:51PM +0900, Isaku Yamahata wrote: > factor out the logic which converts io port address into pci device > and offset in PCI configuration space. > > Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> > --- > hw/pci.c | 32 ++++++++++++++++++-------------- > 1 files changed, 18 insertions(+), 14 deletions(-) > > diff --git a/hw/pci.c b/hw/pci.c > index 33cc476..0021c96 100644 > --- a/hw/pci.c > +++ b/hw/pci.c > @@ -654,24 +654,33 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l) > pci_update_mappings(d); > } > > +static inline PCIDevice *pci_addr_to_dev(PCIBus *bus, uint32_t addr) > +{ > + uint8_t bus_num = (addr >> 16) & 0xff; > + uint8_t devfn = (addr >> 8) & 0xff; > + return pci_find_device(bus, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); > +} > + > +static inline int pci_addr_to_config(uint32_t addr) > +{ > + return addr & 0xff; > +} Replace 0xff with (PCI_CONFIG_SPACE - 1)? > + > void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) > { > PCIBus *s = opaque; > PCIDevice *pci_dev; > - int config_addr, bus_num; > + int config_addr; > > #if 0 > PCI_DPRINTF("pci_data_write: addr=%08x val=%08x len=%d\n", > addr, val, len); > #endif > - bus_num = (addr >> 16) & 0xff; > - s = pci_find_bus(s, bus_num); > - if (!s) > - return; > - pci_dev = s->devices[(addr >> 8) & 0xff]; > + pci_dev = pci_addr_to_dev(s, addr); > if (!pci_dev) > return; > config_addr = addr & 0xff; > + config_addr = pci_addr_to_config(addr); > PCI_DPRINTF("pci_config_write: %s: addr=%02x val=%08x len=%d\n", > pci_dev->name, config_addr, val, len); > pci_dev->config_write(pci_dev, config_addr, val, len); > @@ -681,16 +690,11 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) > { > PCIBus *s = opaque; > PCIDevice *pci_dev; > - int config_addr, bus_num; > + int config_addr; > uint32_t val; > > - bus_num = (addr >> 16) & 0xff; > - s = pci_find_bus(s, bus_num); > - if (!s) > - goto fail; > - pci_dev = s->devices[(addr >> 8) & 0xff]; > + pci_dev = pci_addr_to_dev(s, addr); > if (!pci_dev) { > - fail: > switch(len) { > case 1: > val = 0xff; > @@ -705,7 +709,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) > } > goto the_end; > } > - config_addr = addr & 0xff; > + config_addr = pci_addr_to_config(addr); > val = pci_dev->config_read(pci_dev, config_addr, len); > PCI_DPRINTF("pci_config_read: %s: addr=%02x val=%08x len=%d\n", > pci_dev->name, config_addr, val, len); > -- > 1.6.0.2
diff --git a/hw/pci.c b/hw/pci.c index 33cc476..0021c96 100644 --- a/hw/pci.c +++ b/hw/pci.c @@ -654,24 +654,33 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l) pci_update_mappings(d); } +static inline PCIDevice *pci_addr_to_dev(PCIBus *bus, uint32_t addr) +{ + uint8_t bus_num = (addr >> 16) & 0xff; + uint8_t devfn = (addr >> 8) & 0xff; + return pci_find_device(bus, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); +} + +static inline int pci_addr_to_config(uint32_t addr) +{ + return addr & 0xff; +} + void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) { PCIBus *s = opaque; PCIDevice *pci_dev; - int config_addr, bus_num; + int config_addr; #if 0 PCI_DPRINTF("pci_data_write: addr=%08x val=%08x len=%d\n", addr, val, len); #endif - bus_num = (addr >> 16) & 0xff; - s = pci_find_bus(s, bus_num); - if (!s) - return; - pci_dev = s->devices[(addr >> 8) & 0xff]; + pci_dev = pci_addr_to_dev(s, addr); if (!pci_dev) return; config_addr = addr & 0xff; + config_addr = pci_addr_to_config(addr); PCI_DPRINTF("pci_config_write: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, val, len); pci_dev->config_write(pci_dev, config_addr, val, len); @@ -681,16 +690,11 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) { PCIBus *s = opaque; PCIDevice *pci_dev; - int config_addr, bus_num; + int config_addr; uint32_t val; - bus_num = (addr >> 16) & 0xff; - s = pci_find_bus(s, bus_num); - if (!s) - goto fail; - pci_dev = s->devices[(addr >> 8) & 0xff]; + pci_dev = pci_addr_to_dev(s, addr); if (!pci_dev) { - fail: switch(len) { case 1: val = 0xff; @@ -705,7 +709,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) } goto the_end; } - config_addr = addr & 0xff; + config_addr = pci_addr_to_config(addr); val = pci_dev->config_read(pci_dev, config_addr, len); PCI_DPRINTF("pci_config_read: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, val, len);
factor out the logic which converts io port address into pci device and offset in PCI configuration space. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> --- hw/pci.c | 32 ++++++++++++++++++-------------- 1 files changed, 18 insertions(+), 14 deletions(-)