@@ -609,44 +609,25 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
pci_update_mappings(d);
}
-void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len)
+static void pci_data_write_common(PCIDevice *pci_dev,
+ uint32_t config_addr, uint32_t val, int len)
{
- PCIBus *s = opaque;
- PCIDevice *pci_dev;
- int config_addr, bus_num;
-
-#if 0
- PCI_DPRINTF("pci_data_write: addr=%08"PRIx32" val=%08"PRIx32" len=%d\n",
- addr, val, len);
-#endif
- bus_num = (addr >> 16) & 0xff;
- s = pci_find_bus(s, bus_num);
- if (!s)
- return;
- pci_dev = s->devices[(addr >> 8) & 0xff];
+ assert(len == 1 || len == 2 || len == 4);
if (!pci_dev)
return;
- config_addr = addr & 0xff;
- PCI_DPRINTF("pci_config_write: %s: "
- "addr=%02x val=%08"PRI32x" len=%d\n",
- pci_dev->name, config_addr, val, len);
+
+ PCI_DPRINTF("%s: %s: addr=%02"PRIx32" val=%08"PRI32x" len=%d\n",
+ __func__, pci_dev->name, config_addr, val, len);
pci_dev->config_write(pci_dev, config_addr, val, len);
}
-uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
+static uint32_t pci_data_read_common(PCIDevice *pci_dev,
+ uint32_t config_addr, int len)
{
- PCIBus *s = opaque;
- PCIDevice *pci_dev;
- int config_addr, bus_num;
uint32_t val;
- bus_num = (addr >> 16) & 0xff;
- s = pci_find_bus(s, bus_num);
- if (!s)
- goto fail;
- pci_dev = s->devices[(addr >> 8) & 0xff];
+ assert(len == 1 || len == 2 || len == 4);
if (!pci_dev) {
- fail:
switch(len) {
case 1:
val = 0xff;
@@ -659,21 +640,50 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
val = 0xffffffff;
break;
}
- goto the_end;
+ } else {
+ val = pci_dev->config_read(pci_dev, config_addr, len);
+ PCI_DPRINTF("%s: %s: addr=%02"PRIx32" val=%08"PRIx32" len=%d\n",
+ __func__, pci_dev->name, config_addr, val, len);
}
- config_addr = addr & 0xff;
- val = pci_dev->config_read(pci_dev, config_addr, len);
- PCI_DPRINTF("pci_config_read: %s: "
- "addr=%02x val=%08"PRIx32" len=%d\n",
- pci_dev->name, config_addr, val, len);
- the_end:
+
#if 0
- PCI_DPRINTF("pci_data_read: addr=%08"PRIx32" val=%08"PRIx32" len=%d\n",
- addr, val, len);
+ PCI_DPRINTF("%s: addr=%08"PRIx32" val=%08"PRIx32" len=%d\n",
+ __func__, addr, val, len);
#endif
return val;
}
+static inline PCIDevice *pci_addr_to_dev(PCIBus *bus, uint32_t addr)
+{
+ int bus_num = (addr >> 16) & 0xff;
+ unsigned int devfn = (addr >> 8) & 0xff;
+
+ return pci_find_device(bus, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
+}
+
+static inline uint32_t pci_addr_to_config(uint32_t addr)
+{
+ return addr & 0xff;
+}
+
+void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len)
+{
+ PCIBus *s = opaque;
+#if 0
+ PCI_DPRINTF("pci_data_write: addr=%08"PRIx32" val=%08"PRIx32" len=%d\n",
+ addr, val, len);
+#endif
+
+ pci_data_write_common(pci_addr_to_dev(s, addr), pci_addr_to_config(addr),
+ val, len);
+}
+
+uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
+{
+ PCIBus *s = opaque;
+ return pci_data_read_common(pci_addr_to_dev(s, addr),
+ pci_addr_to_config(addr), len);
+}
/***********************************************************/
/* generic PCI irq support */
factor out conversion logic from io port address into bus+dev+func with bit shift operation and conversion bus+dev+func into pci device. They will be used later by pcie support. This patch also eliminates the logic duplication. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> --- hw/pci.c | 84 ++++++++++++++++++++++++++++++++++--------------------------- 1 files changed, 47 insertions(+), 37 deletions(-)