diff mbox series

[v4,2/9] mac_newworld: Allow loading binary ROM image

Message ID 076b37ab493049ef05fdeb2b7c0833375833b370.1592158400.git.balaton@eik.bme.hu
State New
Headers show
Series Mac Old World ROM experiment | expand

Commit Message

BALATON Zoltan June 14, 2020, 6:13 p.m. UTC
Fall back to load binary ROM image if loading ELF fails. This also
moves PROM_BASE and PROM_SIZE defines to board as these are matching
the ROM size and address on this board.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
Notes:
    Unlike mac_oldworld where the openbios-ppc image loads at end of ROM
    region here we only check size and assume ELF image is loaded from
    PROM_BASE, Checking the load addr here is tricky because this board is
    also be compiled both 64 and 32 bit and load_elf seems to always
    return 64 bit value so handling that could become a mess. If this is a
    problem then it's a preexisting one so should be fixed in a separate
    patch. This one just allows loading ROM binary too otherwise
    preserving previous behaviour.

 hw/ppc/mac.h          |  2 --
 hw/ppc/mac_newworld.c | 22 ++++++++++++++--------
 2 files changed, 14 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/hw/ppc/mac.h b/hw/ppc/mac.h
index 6af87d1fa0..a0d9e47031 100644
--- a/hw/ppc/mac.h
+++ b/hw/ppc/mac.h
@@ -38,10 +38,8 @@ 
 /* SMP is not enabled, for now */
 #define MAX_CPUS 1
 
-#define BIOS_SIZE        (1 * MiB)
 #define NVRAM_SIZE        0x2000
 #define PROM_FILENAME    "openbios-ppc"
-#define PROM_ADDR         0xfff00000
 
 #define KERNEL_LOAD_ADDR 0x01000000
 #define KERNEL_GAP       0x00100000
diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index 3507f26f6e..5c8a625276 100644
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -82,6 +82,8 @@ 
 
 #define NDRV_VGA_FILENAME "qemu_vga.ndrv"
 
+#define PROM_BASE 0xfff00000
+#define PROM_SIZE (1 * MiB)
 
 static void fw_cfg_boot_set(void *opaque, const char *boot_device,
                             Error **errp)
@@ -100,7 +102,7 @@  static void ppc_core99_reset(void *opaque)
 
     cpu_reset(CPU(cpu));
     /* 970 CPUs want to get their initial IP as part of their boot protocol */
-    cpu->env.nip = PROM_ADDR + 0x100;
+    cpu->env.nip = PROM_BASE + 0x100;
 }
 
 /* PowerPC Mac99 hardware initialisation */
@@ -153,25 +155,29 @@  static void ppc_core99_init(MachineState *machine)
     /* allocate RAM */
     memory_region_add_subregion(get_system_memory(), 0, machine->ram);
 
-    /* allocate and load BIOS */
-    memory_region_init_rom(bios, NULL, "ppc_core99.bios", BIOS_SIZE,
+    /* allocate and load firmware ROM */
+    memory_region_init_rom(bios, NULL, "ppc_core99.bios", PROM_SIZE,
                            &error_fatal);
+    memory_region_add_subregion(get_system_memory(), PROM_BASE, bios);
 
-    if (bios_name == NULL)
+    if (!bios_name) {
         bios_name = PROM_FILENAME;
+    }
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
-    memory_region_add_subregion(get_system_memory(), PROM_ADDR, bios);
-
-    /* Load OpenBIOS (ELF) */
     if (filename) {
+        /* Load OpenBIOS (ELF) */
         bios_size = load_elf(filename, NULL, NULL, NULL, NULL,
                              NULL, NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
 
+        if (bios_size <= 0) {
+            /* or load binary ROM image */
+            bios_size = load_image_targphys(filename, PROM_BASE, PROM_SIZE);
+        }
         g_free(filename);
     } else {
         bios_size = -1;
     }
-    if (bios_size < 0 || bios_size > BIOS_SIZE) {
+    if (bios_size < 0 || bios_size > PROM_SIZE) {
         error_report("could not load PowerPC bios '%s'", bios_name);
         exit(1);
     }