Show patches with: Submitter = Thomas Huth       |    State = Action Required       |   136 patches
« 1 2 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[PULL,11/11] next-cube.c: move machine MemoryRegions into NeXTState [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,10/11] next-cube.c: remove val and size arguments from nextscr2_write() [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,09/11] next-cube.c: move LED logic to new next_scr2_led_update() function [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,08/11] next-cube.c: move static old_scr2 variable to NeXTPC [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,07/11] next-cube.c: move static phase variable to NextRtc [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,06/11] next-cube.c: move static led variable to NeXTPC [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,05/11] next-cube.c: update and improve dma_ops [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,04/11] next-cube.c: update scr_ops to properly use modern memory API [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,03/11] next-cube.c: update mmio_ops to properly use modern memory API [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,02/11] next-cube.c: don't pulse SCSI DMA IRQ upon reception of FLUSH command [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - 1 - --- 2023-12-22 Thomas Huth New
[PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout [PULL,01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout - - - 1 --- 2023-12-22 Thomas Huth New
[PULL,00/11] m68k next-cube patches - - - - --- 2023-12-22 Thomas Huth New
hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state - - 2 - --- 2023-12-21 Thomas Huth New
[PULL,10/10] tests/avocado/machine_m68k_nextcube: Fix the download URL for the ROM image [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - - - --- 2023-11-02 Thomas Huth New
[PULL,09/10] m68k: Instantiate the ESP SCSI controller for the NeXTcube machine [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - - - --- 2023-11-02 Thomas Huth New
[PULL,08/10] hw/m68k/next-cube: Mirror BIOS to address 0 [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property 1 - - - --- 2023-11-02 Thomas Huth New
[PULL,07/10] hw/char/mcf_uart: Have mcf_uart_create() return DeviceState [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - - - --- 2023-11-02 Thomas Huth New
[PULL,06/10] hw/m68k/virt: Do not open-code sysbus_create_simple() [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - 2 - --- 2023-11-02 Thomas Huth New
[PULL,05/10] hw/m68k/next-cube: Do not open-code sysbus_create_simple() [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - 2 - --- 2023-11-02 Thomas Huth New
[PULL,04/10] hw/m68k/mcf_intc: Pass CPU using QOM link property [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - 2 1 --- 2023-11-02 Thomas Huth New
[PULL,03/10] hw/m68k/mcf_intc: Expose MMIO region via SysBus API [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - 2 1 --- 2023-11-02 Thomas Huth New
[PULL,02/10] hw/m68k/mcf5206: Pass CPU using QOM link property [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - 2 - --- 2023-11-02 Thomas Huth New
[PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property [PULL,01/10] hw/m68k/irqc: Pass CPU using QOM link property - - 2 - --- 2023-11-02 Thomas Huth New
[PULL,00/10] m68k patches - - - - --- 2023-11-02 Thomas Huth New
tests/avocado: Allow newer versions of tesseract in the nextcube test tests/avocado: Allow newer versions of tesseract in the nextcube test - - 1 - --- 2023-11-01 Thomas Huth New
tests/avocado/machine_m68k_nextcube: Fix the download URL for the ROM image tests/avocado/machine_m68k_nextcube: Fix the download URL for the ROM image - - - - --- 2023-11-01 Thomas Huth New
docs/about: Deprecate the 'next-cube' m68k machine docs/about: Deprecate the 'next-cube' m68k machine - - - - --- 2023-10-07 Thomas Huth New
[5/5] m68k: Add NeXTcube network controller m68k: Instantiate ESP and next-net in the next-cube machine - - - - --- 2023-09-30 Thomas Huth New
[4/5] hw/m68k/next-cube: Remove unused NEXTDMA_EN code m68k: Instantiate ESP and next-net in the next-cube machine - - - - --- 2023-09-30 Thomas Huth New
[3/5] m68k: Instantiate the ESP SCSI controller for the NeXTcube machine m68k: Instantiate ESP and next-net in the next-cube machine - - - - --- 2023-09-30 Thomas Huth New
[2/5] hw/scsi/esp: Work around problem with PIO data read for the NeXT-Cube machine m68k: Instantiate ESP and next-net in the next-cube machine - - - - --- 2023-09-30 Thomas Huth New
[1/5] hw/m68k/next-cube: Mirror BIOS to address 0 m68k: Instantiate ESP and next-net in the next-cube machine - - - - --- 2023-09-30 Thomas Huth New
hw/char/escc: Implement loopback mode hw/char/escc: Implement loopback mode - - 2 - --- 2023-07-16 Thomas Huth New
MAINTAINERS: Add myself as a reviewer for SDL audio MAINTAINERS: Add myself as a reviewer for SDL audio - - 1 - --- 2021-10-30 Thomas Huth New
[PULL,11/11] hw/m68k/next-cube: Add missing header comment to next-cube.h [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,10/11] hw/m68k/next-cube: Add vmstate for NeXTPC device [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,09/11] hw/m68k/next-cube: Remove unused fields from NeXTState [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,08/11] hw/m68k/next-cube: Move rtc into NeXTPC struct [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,07/11] hw/m68k/next-cube: Make next_irq GPIO inputs to NEXT_PC device [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - 1 - - --- 2021-01-19 Thomas Huth New
[PULL,06/11] hw/m68k/next-cube: Move int_status and int_mask to NeXTPC struct [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,05/11] hw/m68k/next-cube: Make next_irq take NeXTPC* as its opaque [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,04/11] hw/m68k/next-cube: Move scr_ops into NeXTPC device [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,03/11] hw/m68k/next-cube: Move mmio_ops into NeXTPC device [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,02/11] hw/m68k/next-cube: Move register/interrupt functionality into a device [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,01/11] hw/m68k/next-cube: Make next_irq() function static [PULL,01/11] hw/m68k/next-cube: Make next_irq() function static - - - - --- 2021-01-19 Thomas Huth New
[PULL,00/11] m68k next-cube patches - - - - --- 2021-01-19 Thomas Huth New
hw/m68k: QOMify the mcf5206 system integration module hw/m68k: QOMify the mcf5206 system integration module - - - - --- 2020-08-19 Thomas Huth New
docs/system/target-avr: Improve the AVR docs and add to MAINTAINERS docs/system/target-avr: Improve the AVR docs and add to MAINTAINERS - - 2 - --- 2020-08-12 Thomas Huth New
[rc6,30/30] target/avr: Add section into QEMU documentation target/avr merger - - - - --- 2020-07-05 Thomas Huth New
[rc6,29/30] tests/acceptance: Test the Arduino MEGA2560 board target/avr merger 1 - 1 2 --- 2020-07-05 Thomas Huth New
[rc6,28/30] tests/boot-serial: Test some Arduino boards (AVR based) target/avr merger 1 - 1 2 --- 2020-07-05 Thomas Huth New
[rc6,27/30] tests/machine-none: Add AVR support target/avr merger - - 2 1 --- 2020-07-05 Thomas Huth New
[rc6,26/30] target/avr: Update build system target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,25/30] hw/avr: Add limited support for some Arduino boards target/avr merger - - 2 - --- 2020-07-05 Thomas Huth New
[rc6,24/30] hw/avr: Add some ATmega microcontrollers target/avr merger - - - - --- 2020-07-05 Thomas Huth New
[rc6,23/30] hw/avr: Add support for loading ELF/raw binaries target/avr merger - - 1 - --- 2020-07-05 Thomas Huth New
[rc6,22/30] target/avr: Register AVR support with the rest of QEMU target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,21/30] hw/misc: avr: Add limited support for power reduction device target/avr merger - - 1 - --- 2020-07-05 Thomas Huth New
[rc6,20/30] hw/timer: avr: Add limited support for 16-bit timer peripheral target/avr merger - - 1 - --- 2020-07-05 Thomas Huth New
[rc6,19/30] hw/char: avr: Add limited support for USART peripheral target/avr merger - - 1 - --- 2020-07-05 Thomas Huth New
[rc6,18/30] target/avr: Add support for disassembling via option '-d in_asm' target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,17/30] target/avr: Initialize TCG register variables target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,16/30] target/avr: Add instruction translation - CPU main translation function target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,15/30] target/avr: Add instruction translation - MCU Control Instructions target/avr merger - - 1 - --- 2020-07-05 Thomas Huth New
[rc6,14/30] target/avr: Add instruction translation - Bit and Bit-test Instructions target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,13/30] target/avr: Add instruction translation - Data Transfer Instructions target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,12/30] target/avr: Add instruction translation - Branch Instructions target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,11/30] target/avr: Add instruction translation - Arithmetic and Logic Instructions target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,10/30] target/avr: Add instruction translation - Register definitions target/avr merger - - 2 1 --- 2020-07-05 Thomas Huth New
[rc6,09/30] target/avr: Add instruction helpers target/avr merger - - 1 1 --- 2020-07-05 Thomas Huth New
[rc6,08/30] target/avr: Add defintions of AVR core types target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,07/30] target/avr: Introduce enumeration AVRFeature target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,06/30] target/avr: CPU class: Add GDB support target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,05/30] target/avr: CPU class: Add migration support target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,04/30] target/avr: CPU class: Add memory menagement support target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,03/30] target/avr: CPU class: Add interrupt handling support target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,02/30] target/avr: Introduce basic CPU class object target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
[rc6,01/30] target/avr: Add basic parameters of the new platform target/avr merger 1 - - 1 --- 2020-07-05 Thomas Huth New
hw/m68k/mcf5206: Replace remaining hw_error()s by qemu_log_mask() hw/m68k/mcf5206: Replace remaining hw_error()s by qemu_log_mask() - - 2 - --- 2020-06-11 Thomas Huth New
[PULL,2/2] hw/m68k/mcf52xx: Replace hw_error() by qemu_log_mask() [PULL,1/2] hw/m68k/mcf5206: Reduce m5206_mbar_read/write() offset arg to 16-bit - - 1 - --- 2020-05-30 Thomas Huth New
[PULL,1/2] hw/m68k/mcf5206: Reduce m5206_mbar_read/write() offset arg to 16-bit [PULL,1/2] hw/m68k/mcf5206: Reduce m5206_mbar_read/write() offset arg to 16-bit - - - - --- 2020-05-30 Thomas Huth New
[PULL,0/2] m68k coldfire machine cleanup patches - - - - --- 2020-05-30 Thomas Huth New
[v2] ui: Print available display backends with '-display help' [v2] ui: Print available display backends with '-display help' - - 1 1 --- 2020-01-06 Thomas Huth New
ui: Print available display backends with '-display help' ui: Print available display backends with '-display help' - - - - --- 2019-10-23 Thomas Huth New
qemu-options: Rework the help text of the '-display' option qemu-options: Rework the help text of the '-display' option - - 1 - --- 2019-10-23 Thomas Huth New
hw/m68k/next-cube: Avoid static RTC variables and introduce control register hw/m68k/next-cube: Avoid static RTC variables and introduce control register - - 1 - --- 2019-09-21 Thomas Huth New
[PULL,8/8] .travis.yml: Let the avocado job run the NeXTcube tests [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - - - --- 2019-09-07 Thomas Huth New
[PULL,7/8] tests/acceptance: Add test of NeXTcube framebuffer using OCR [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - - - --- 2019-09-07 Thomas Huth New
[PULL,6/8] m68k: Add an entry for the NeXTcube machine to the MAINTAINERS file [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - 1 - --- 2019-09-07 Thomas Huth New
[PULL,5/8] m68k: Add serial controller to the NeXTcube machine [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - - 1 --- 2019-09-07 Thomas Huth New
[PULL,4/8] escc: introduce a selector for the register bit [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - 2 1 --- 2019-09-07 Thomas Huth New
[PULL,3/8] m68k: Add NeXTcube machine [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - - 1 --- 2019-09-07 Thomas Huth New
[PULL,2/8] m68k: Add NeXTcube keyboard device [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - 1 1 --- 2019-09-07 Thomas Huth New
[PULL,1/8] m68k: Add NeXTcube framebuffer device emulation [PULL,1/8] m68k: Add NeXTcube framebuffer device emulation - - 1 1 --- 2019-09-07 Thomas Huth New
[PULL,0/8] Add the m68k next-cube machine - - - - --- 2019-09-07 Thomas Huth New
[v5,6/6] m68k: Add an entry for the NeXTcube machine to the MAINTAINERS file m68k: Add basic support for the NeXTcube machine - - 1 - --- 2019-08-31 Thomas Huth New
[v5,5/6] m68k: Add serial controller to the NeXTcube machine m68k: Add basic support for the NeXTcube machine - - - 1 --- 2019-08-31 Thomas Huth New
[v5,4/6] escc: introduce a selector for the register bit m68k: Add basic support for the NeXTcube machine - - 2 1 --- 2019-08-31 Thomas Huth New
[v5,3/6] m68k: Add NeXTcube machine m68k: Add basic support for the NeXTcube machine - - - 1 --- 2019-08-31 Thomas Huth New
[v5,2/6] m68k: Add NeXTcube keyboard device m68k: Add basic support for the NeXTcube machine - - 1 1 --- 2019-08-31 Thomas Huth New
« 1 2 »