Show patches with: State = Action Required       |   303749 patches
« 1 2 ... 2957 2958 2959 … 3037 3038 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[5/5] HACKING: add rules for printf-like functions - - - - --- 2010-08-26 Blue Swirl New
[4/5] HACKING: add string management rules - - - - --- 2010-08-26 Blue Swirl New
[3/5] HACKING: add memory management rules - - - - --- 2010-08-26 Blue Swirl New
[2/5] HACKING: add C type rules - - - - --- 2010-08-26 Blue Swirl New
[1/5] HACKING: add preprocessor rules - - - - --- 2010-08-26 Blue Swirl New
[6/6] ppc4xx: load Bamboo kernel, initrd, and fdt at fixed addresses - - - - --- 2010-08-26 Alexander Graf New
[5/6] ppc4xx: don't unregister RAM at reset - - - - --- 2010-08-26 Alexander Graf New
[4/6] ppc4xx: correct SDRAM controller warning message condition - - - - --- 2010-08-26 Alexander Graf New
[3/6] Fix "make install" with a cross toolchain - - - - --- 2010-08-26 Alexander Graf New
[1/6] PPC: Add PV hypercall transport through fw_cfg - - - - --- 2010-08-26 Alexander Graf New
[RESEND] Fix SIGFPE race for vnc display resize - - - - --- 2010-08-26 Chris Webb New
[V2] balloon: Don't try fetching info if machine is stopped - - - - --- 2010-08-26 Amit Shah New
[v3] Introduce NBD named exports. - - - - --- 2010-08-25 Laurent Vivier New
[3/3] seabios: Add DSDT entry for an emulated TPM 1.2 device - - - - --- 2010-08-25 Andreas Niederl New
[2/3] Add command line options for TPM interface - - - - --- 2010-08-25 Andreas Niederl New
[1/3] Add TPM 1.2 host device passthrough interface - - - - --- 2010-08-25 Andreas Niederl New
[v3,10/10] spice: add tablet support - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,09/10] spice: simple display - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,08/10] spice: add mouse - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,07/10] spice: add keyboard - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,06/10] spice: core bits - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,05/10] add spice into the configure file - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,04/10] configure: add logging - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,03/10] add pflib: PixelFormat conversion library. - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,02/10] Use machine_init() to register virtfs config options. - - - - --- 2010-08-25 Gerd Hoffmann New
[v3,01/10] Use display types for local display only. - - - - --- 2010-08-25 Gerd Hoffmann New
[v2] Introduce NBD named exports. - - - - --- 2010-08-24 Laurent Vivier New
Re: Unusual physical address when using 64-bit BAR - - - - --- 2010-08-24 Cam Macdonell New
[4/4] Rename PCI_FUNC_MAX to PCI_FUNCTIONS_PER_DEVICES in pci.[ch] - - - - --- 2010-08-24 Ken CC New
[3/4] Check pci slot number against PCIBUS_MAX_DEVICES in parse_pci_devfn - - - - --- 2010-08-24 Ken CC New
[2/4] pci init: fail qemu if devfn exceeding the max function number supported on bus - - - - --- 2010-08-24 Ken CC New
[1/4] PCI: define PCIBUS_MAX_DEVICES and PCI_FUNCTIONS_PER_DEVICE in pci.h - - - - --- 2010-08-24 Ken CC New
[RFC,STABLE,0.13] Revert "qcow2: Use bdrv_(p)write_sync for metadata writes" - - - - --- 2010-08-24 Kevin Wolf New
[3/3] Check pci slot number in parse_pci_devfn - - - - --- 2010-08-24 Ken CC New
[2/3] pci init: fail qemu if devfn exceeding the max devices number supported on bus - - - - --- 2010-08-24 Ken CC New
[3/3] Check pci slot number in parse_pci_devfn - - - - --- 2010-08-24 Ken CC New
[2/3] pci init: fail qemu if devfn exceeding the max devices number supported on bus - - - - --- 2010-08-24 Ken CC New
[1/3] PCI: define max devices number on PCIBus as PCIBUS_MAX_DEVICES in pci.h - - - - --- 2010-08-24 Ken CC New
Introduce NBD named exports. - - - - --- 2010-08-24 Laurent Vivier New
[5/5] Expose drive_add on all architectures - - - - --- 2010-08-23 Alexander Graf New
[4/5] Add generic drive hotplugging - - - - --- 2010-08-23 Alexander Graf New
[3/5] Compile device-hotplug on all targets - - - - --- 2010-08-23 Alexander Graf New
[2/5,S390] Increase amount of virtio pages - - - - --- 2010-08-23 Alexander Graf New
[1/5,S390] Add hotplug support - - - - --- 2010-08-23 Alexander Graf New
[3/3] switch vmware_vga to pci vgabios - - - - --- 2010-08-23 Gerd Hoffmann New
[2/3] switch stdvga to pci vgabios - - - - --- 2010-08-23 Gerd Hoffmann New
[1/3] Add new vgabios binaries to blobs list. - - - - --- 2010-08-23 Gerd Hoffmann New
[15/15] xen: Add a Xen specific ACPI Implementation to target-xen - - - - --- 2010-08-23 Stefano Stabellini New
[14/15] xen: destroy the VM when shutdown is requested - - - - --- 2010-08-23 Stefano Stabellini New
[13/15] vl.c: Introduce getter for shutdown_requested and reset_requested. - - - - --- 2010-08-23 Stefano Stabellini New
[12/15] piix_pci: Introduces Xen specific call for irq. - - - - --- 2010-08-23 Stefano Stabellini New
[11/15] xen: Introduce --enable-xen command options. - - - - --- 2010-08-23 Stefano Stabellini New
[10/15] xen: Introduce the Xen mapcache - - - - --- 2010-08-23 Stefano Stabellini New
[09/15] xen: Initialize event channels and io rings - - - - --- 2010-08-23 Stefano Stabellini New
[08/15] xen: Read and write the state of the VM in xenstore - - - - --- 2010-08-23 Stefano Stabellini New
[07/15] xen: handle xenstore events - - - - --- 2010-08-23 Stefano Stabellini New
[06/15] xen: Add the Xen platform pci device - - - - --- 2010-08-23 Stefano Stabellini New
[05/15] xen: add a 8259 Interrupt Controller - - - - --- 2010-08-23 Stefano Stabellini New
[04/15] xen: xen_machine_fv, initialize xenctrl - - - - --- 2010-08-23 Stefano Stabellini New
[03/15] xen: Add a new target to qemu: target-xen - - - - --- 2010-08-23 Stefano Stabellini New
[02/15] xen: Add xen_machine_fv - - - - --- 2010-08-23 Stefano Stabellini New
[01/15] xen: Support new libxc calls from xen unstable. - - - - --- 2010-08-23 Stefano Stabellini New
[2/2] pci init: Check if devfn exceeding the max devices number supported on bus - - - - --- 2010-08-23 Ken CC New
pci init: Check if devfn exceeding the max devices number supported on bus - - - - --- 2010-08-23 Ken CC New
[1/2] PCI: define max devices number on PCIBus as PCIBus_MAX_DEVICES in pci.h - - - - --- 2010-08-23 Ken CC New
vl.c: set NULL upon deleting handlers in qemu_set_fd_handler2() - - 1 - --- 2010-08-23 Yoshiaki Tamura New
lsi53c895a: Fix breakage v0.12.5 merge for SGL passthrough qemu-kvm.git tree - - - - --- 2010-08-22 Nicholas A. Bellinger New
fat_chksum(): fix access above array bounds - - - - --- 2010-08-21 Loïc Minier New
patch: use correct output format in wm8750_set_format() - - - - --- 2010-08-21 Austin English New
Correct use of ! and & 1 - - - --- 2010-08-21 Blue Swirl New
VGA: Don't register deprecated VBE range - - - - --- 2010-08-20 Alex Williamson New
[4/4] QMP: Update README file - - - - --- 2010-08-20 Luiz Capitulino New
[3/4] QMP doc: Add 'Stability Considerations' section - - - - --- 2010-08-20 Luiz Capitulino New
[2/4] QMP/monitor: update do_info_version() to output broken down version string - - - - --- 2010-08-20 Luiz Capitulino New
[1/4] QMP: update 'query-version' documentation - - - - --- 2010-08-20 Luiz Capitulino New
qdev: Reset hotplugged devices 1 - - - --- 2010-08-20 Anthony Liguori New
[3/3] compile -fsdev and -virtfs cmd line options unconditionally. - - - - --- 2010-08-20 Gerd Hoffmann New
[2/3] QemuOpts: make most qemu_*_opts static - - - - --- 2010-08-20 Gerd Hoffmann New
[1/3] QemuOpts: allow new option groups be registered at runtime. - - - - --- 2010-08-20 Gerd Hoffmann New
virtio-9p: Change handling of flags in open() path for 9P2000.L - - - - --- 2010-08-20 Sripathi Kodi New
vnc: check fd before calling qemu_set_fd_handler2() in vnc_client_write() 1 - - - --- 2010-08-20 Yoshiaki Tamura New
[V2] balloon: Don't try fetching info if machine is stopped 1 - - - --- 2010-08-20 Amit Shah New
[4/4] QMP: Update README file - - - - --- 2010-08-19 Luiz Capitulino New
[3/4] QMP doc: Add 'Stability Considerations' section - - - - --- 2010-08-19 Luiz Capitulino New
[2/4] QMP/monitor: update do_info_version() to output broken down version string - - - - --- 2010-08-19 Luiz Capitulino New
[1/4] QMP: update 'query-version' documentation - - - - --- 2010-08-19 Luiz Capitulino New
[2/2] ui/sdl: clean up dead code - - - - --- 2010-08-19 Serge Ziryukin New
[1/2] WM8750: clean up dead code - - - - --- 2010-08-19 Serge Ziryukin New
[4/4] savevm: Reset last block info at beginning of each save 1 - - - --- 2010-08-19 Luiz Capitulino New
[3/4] migration: Accept 'cont' only after successful incoming migration - - 1 - --- 2010-08-19 Luiz Capitulino New
[2/4] QEMUFileBuffered: indicate that we're ready when the underlying file is ready - - - - --- 2010-08-19 Luiz Capitulino New
[1/4] set proper migration status on ->write error (v5) - - - - --- 2010-08-19 Luiz Capitulino New
[RESENT] msix: allow byte and word reading from mmio - - - - --- 2010-08-19 Bernhard Kohl New
[RESENT] pckbd: support for commands 0xf0-0xff: Pulse output bit - - - - --- 2010-08-19 Bernhard Kohl New
[9/9] spice: add tablet support - - - - --- 2010-08-19 Gerd Hoffmann New
[8/9] spice: simple display - - - - --- 2010-08-19 Gerd Hoffmann New
[7/9] spice: add mouse - - - - --- 2010-08-19 Gerd Hoffmann New
[6/9] spice: add keyboard - - - - --- 2010-08-19 Gerd Hoffmann New
[5/9] spice: core bits - - - - --- 2010-08-19 Gerd Hoffmann New
[4/9] configure: require spice 0.5.3 - - - - --- 2010-08-19 Gerd Hoffmann New
« 1 2 ... 2957 2958 2959 … 3037 3038 »