Show patches with: State = Action Required       |   189429 patches
« 1 2 3 41894 1895 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[1/7] blockjob: record time of last yield blockjob: refactor mirror_throttle - - - - 0 0 0 2017-12-14 John Snow New
test/i386 - Allow TCG to boot with > 1TB memory test/i386 - Allow TCG to boot with > 1TB memory - - - - 0 0 0 2017-12-13 Antonio Huete Jiménez New
[26/26] sdcard: add/use a ccc_spi enum for the commands supported in SPI mode SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[25/26] sdcard: add/use a SDCardCommandClass enum instead of magic numbers SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[24/26] sdcard: use a 16-bit type for the 16-bit RCA register SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[23/26] sdcard: add ACMD trace events SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[22/26] sdcard: reduce sd_cmd traces SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[21/26] sdcard: add sd_cmd_abbreviation() to resolve the SD command id SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[20/26] sdcard: add/use SD_CMD_MAX to check valid SD commands SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[19/26] sdcard: add DSR register SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[18/26] sdcard: move Memory Card registers together SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[17/26] sdcard: rename sd_set_REG() functions called by sd_reset() as sd_reset_REG() SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[16/26] sdcard: let cmd_valid_while_locked() returns a bool SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[15/26] sdcard: use PW_LEN define instead of '16' magic SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[RFC,14/26] sdcard: use qemu_hexbuf_strdup() to trace command response SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[13/26] sdcard: add more trace events SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[12/26] sdcard: replace DPRINTF() by trace events SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[11/26] sdcard: use warn_report() instead of fprintf() SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[10/26] sdcard: use more detailled state/mode trace events SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[09/26] sdcard: add a sdcard_set_state() trace event SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[08/26] sdcard: add sd_set_state() SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[07/26] sdcard: add sdcard_set_mode() trace event SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[06/26] sdcard: add sd_set_mode() SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[05/26] sdcard: rename sd_set_mode() -> sd_update_mode() SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[04/26] sdcard: replace fprintf() -> qemu_log_mask() SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[03/26] sdcard: use ldst API SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[RFC,02/26] sdcard: add a Python qtest SDCard housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[01/26] sdbus: add a QMP command to access a SDBus [01/26] sdbus: add a QMP command to access a SDBus - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[6/6] tests: add a Makefile rule to run Python qtests QTests: use Python to run complex tests - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[5/6] qtest.py: add a simple main() which calls unittest.main() QTests: use Python to run complex tests - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[4/6] qtest.py: add verify_machine(supported_machines) QTests: use Python to run complex tests - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[3/6] qtest.py: use TMPDIR/TEMP if the TEST_DIR env var is missing QTests: use Python to run complex tests - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[2/6] iotests.py: move the generic QMPTestCase to qtest.py QTests: use Python to run complex tests - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[1/6] iotests.py: split BlockQMPTestCase class of QMPTestCase QTests: use Python to run complex tests - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[v2] blockjob: kick jobs on set-speed [v2] blockjob: kick jobs on set-speed - - 1 - 0 0 0 2017-12-13 John Snow New
[11/11] hw/arm/xilinx_zynq: use sdbus_create_slave() to name the different SD busses QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[10/11] hw/sd/pxa2xx: implement the SD_BUS_MASTER interface QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[09/11] sdhci: implement the SD_BUS_MASTER interface QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[08/11] sdbus: add a SD_BUS_MASTER interface QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[07/11] sdbus: add a SD_BUS_SLAVE interface QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[06/11] sdbus: rename SDCardClass -> SDSlaveClass QOM'ify SDBus, housekeeping 1 - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[05/11] sdbus: add sdbus_create_slave() QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[04/11] sdbus: add sdbus_create_bus() to replace qbus_create_inplace() QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[03/11] sdbus: add trace events QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[02/11] bcm2835_peripherals: move GPIO 'sdbus' property link from init() -> realize() QOM'ify SDBus, housekeeping 1 - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[RFC,01/11] util/cutils: add qemu_hexbuf_strdup(), yet another hexdump() QOM'ify SDBus, housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[dontapply] virtio: rework set_status callbacks [dontapply] virtio: rework set_status callbacks - - - - 0 0 0 2017-12-13 Michael S. Tsirkin New
virtio_error: don't invoke status callbacks virtio_error: don't invoke status callbacks - - - - 0 0 0 2017-12-13 Michael S. Tsirkin New
[13/14] sdhci: add sdhci_init_capareg() to initialize the CAPAB register SDHCI housekeeping - - - - 0 0 0 2017-12-13 Philippe Mathieu-Daudé New
[v1,2/2] cpus.c: change qmp_query_cpus 'value->current' logic QMP: implementing qmp_cpu - - - - 0 0 0 2017-12-13 Daniel Henrique Barboza New
[v1,1/2] qmp.c: (re)implement qmp_cpu QMP: implementing qmp_cpu - - - - 0 0 0 2017-12-13 Daniel Henrique Barboza New
[PULL,4/4] vfio-pci: Remove unused fields from VFIOMSIXInfo [PULL,1/4] vfio: Fix vfio-kvm group registration - 1 - - 0 0 0 2017-12-13 Alex Williamson New
[PULL,3/4] vfio/spapr: Allow fallback to SPAPR TCE IOMMU v1 [PULL,1/4] vfio: Fix vfio-kvm group registration - 1 - - 0 0 0 2017-12-13 Alex Williamson New
[PULL,43/43] xilinx_spips: Use memset instead of a for loop to zero registers [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,42/43] xilinx_spips: Set all of the reset values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,41/43] xilinx_spips: Update the QSPI Mod ID reset value [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,40/43] MAINTAINERS: replace the unavailable email address [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - - - 0 0 0 2017-12-13 Peter Maydell New
[PULL,39/43] hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,2/4] vfio/common: init giommu_list and hostwin_list of vfio container [PULL,1/4] vfio: Fix vfio-kvm group registration - - - - 0 0 0 2017-12-13 Alex Williamson New
[PULL,38/43] nvic: Make systick banked [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,37/43] nvic: Make nvic_sysreg_ns_ops work with any MemoryRegion [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,36/43] target/arm: Extend PAR format determination [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,35/43] target/arm: Remove fsr argument from get_phys_addr() and arm_tlb_fill() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,34/43] target/arm: Ignore fsr from get_phys_addr() in do_ats_write() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,33/43] target/arm: Use ARMMMUFaultInfo in deliver_fault() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,32/43] target/arm: Convert get_phys_addr_pmsav8() to not return FSC values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,31/43] target/arm: Convert get_phys_addr_pmsav7() to not return FSC values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,30/43] target/arm: Convert get_phys_addr_pmsav5() to not return FSC values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,29/43] target/arm: Convert get_phys_addr_lpae() to not return FSC values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,28/43] target/arm: Convert get_phys_addr_v6() to not return FSC values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,27/43] target/arm: Convert get_phys_addr_v5() to not return FSC values [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,26/43] target/arm: Remove fsr argument from arm_ld*_ptw() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,25/43] target/arm: Provide fault type enum and FSR conversion functions [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,24/43] target/arm: Implement TT instruction [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,23/43] target/arm: Factor MPU lookup code out of get_phys_addr_pmsav8() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,22/43] target/arm: Create new arm_v7m_mmu_idx_for_secstate_and_priv() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,21/43] target/arm: Split M profile MNegPri mmu index into user and priv [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,20/43] target/arm: Add missing M profile case to regime_is_user() [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,19/43] target/arm: Allow explicit writes to CONTROL.SPSEL in Handler mode [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,18/43] target/arm: Handle SPSEL and current stack being out of sync in MSP/PSP reads [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,17/43] hw/intc/arm_gicv3_its: Implement full reset [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,16/43] linux-headers: update to 4.15-rc1 [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - - - 0 0 0 2017-12-13 Peter Maydell New
[PULL,15/43] hw/intc/arm_gicv3_its: Implement a minimalist reset [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,14/43] hw/intc/arm_gicv3_its: Don't call post_load on reset [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,13/43] xlnx-zcu102: Add support for the ZynqMP QSPI [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 3 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,12/43] xilinx_spips: Add support for the ZynqMP Generic QSPI [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,11/43] xilinx_spips: Don't set TX FIFO UNDERFLOW at cmd done [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR 1 - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,10/43] xilinx_spips: Add support for 4 byte addresses in the LQSPI [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,09/43] xilinx_spips: Add support for zero pumping [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,08/43] xilinx_spips: Make tx/rx_data_bytes more generic and reusable [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,07/43] xilinx_spips: Add support for RX discard and RX drain [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,06/43] xilinx_spips: Update striping to be big-endian bit order [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR 1 - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,05/43] xilinx_spips: Move FlashCMD, XilinxQSPIPS and XilinxSPIPSClass [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 3 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,04/43] m25p80: Add support for n25q512a11 and n25q512a13 [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR 1 - 2 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,03/43] m25p80: Add support for BRRD/BRWR and BULK_ERASE (0x60) [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR 1 - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,02/43] m25p80: Add support for SST READ ID 0x90/0xAB commands [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR - - 1 - 0 0 0 2017-12-13 Peter Maydell New
[PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR [PULL,01/43] m25p80: Add support for continuous read out of RDSR and READ_FSR 1 - 1 1 0 0 0 2017-12-13 Peter Maydell New
[PULL,00/43] target-arm queue - - - - 0 0 0 2017-12-13 Peter Maydell New
[PULL,1/4] vfio: Fix vfio-kvm group registration [PULL,1/4] vfio: Fix vfio-kvm group registration - 1 3 2 0 0 0 2017-12-13 Alex Williamson New
[PULL,0/4] VFIO updates for v2.12 - - - - 0 0 0 2017-12-13 Alex Williamson New
« 1 2 3 41894 1895 »