[0/5] Multi-Region and Volatile Memory support for CXL Type-3 Devices

Summary of Changes:
1) Correction of PCI_CLASS from STORAGE_EXPRESS to MEMORY_CXL on init
2) Add CXL_CAPACITY_MULTIPLIER definition to replace magic numbers
3) Refactor CDAT DSMAS Initialization for multi-region initialization
4) Multi-Region and Volatile Memory support for CXL Type-3 Devices
5) Test and Documentation updates

Developed with input from Jonathan Cameron and Davidloh Bueso.

This series brings 2 features to CXL Type-3 Devices:
    1) Volatile Memory Region support
    2) Multi-Region support (1 Volatile, 1 Persistent)

In this series we implement multi-region and volatile region support
through 6 major changes to CXL devices
    1) The HostMemoryBackend [hostmem] has been replaced by two
       [hostvmem] and [hostpmem] to store volatile and persistent memory
       respectively
    2) The single AddressSpace has been replaced by two AddressSpaces
       [hostvmem_as] and [hostpmem_as] to map respective memdevs.
    3) Each memory region size and total region are stored separately
    4) The CDAT and DVSEC memory map entries have been updated:
       a) if vmem is present, vmem is mapped at DPA(0)
       b) if pmem is present
          i)  and vmem is present, pmem is mapped at DPA(vmem->size)
          ii) else, pmem is mapped at DPA(0)
       c) partitioning of pmem is not supported in this patch set but
          has been discussed and this design should suffice.
    5) Read/Write functions have been updated to access AddressSpaces
       according to the mapping described in #4
    6) cxl-mailbox has been updated to report the respective size of
       volatile and persistent memory regions

CXL Spec (3.0) Section 8.2.9.8.2.0 - Get Partition Info
  Active Volatile Memory
    The device shall provide this volatile capacity starting at DPA 0
  Active Persistent Memory
    The device shall provide this persistent capacity starting at the
    DPA immediately following the volatile capacity

Partitioning of Persistent Memory regions may be supported on following
patch sets.

Submitted as an extention to the CDAT emulation because the CDAT DSMAS
entry concerns memory mapping and is required to successfully map memory
regions correctly in bios/efi.

Gregory Price (5):
  hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
  hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
  hw/mem/cxl_type: Generalize CDATDsmas initialization for Memory
    Regions
  hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)
  cxl: update tests and documentation for new cxl properties

 docs/system/devices/cxl.rst |  53 ++++-
 hw/cxl/cxl-mailbox-utils.c  |  23 +-
 hw/mem/cxl_type3.c          | 449 +++++++++++++++++++++++-------------
 include/hw/cxl/cxl_device.h |  11 +-
 tests/qtest/cxl-test.c      |  81 ++++++-
 5 files changed, 416 insertions(+), 201 deletions(-)

On Tue, Oct 11, 2022 at 05:19:11PM -0400, Gregory Price wrote:
> Summary of Changes:
> 1) Correction of PCI_CLASS from STORAGE_EXPRESS to MEMORY_CXL on init
> 2) Add CXL_CAPACITY_MULTIPLIER definition to replace magic numbers
> 3) Refactor CDAT DSMAS Initialization for multi-region initialization
> 4) Multi-Region and Volatile Memory support for CXL Type-3 Devices
> 5) Test and Documentation updates
> 
> Developed with input from Jonathan Cameron and Davidloh Bueso.
> 
> This series brings 2 features to CXL Type-3 Devices:
>     1) Volatile Memory Region support
>     2) Multi-Region support (1 Volatile, 1 Persistent)
> 
> In this series we implement multi-region and volatile region support
> through 6 major changes to CXL devices
>     1) The HostMemoryBackend [hostmem] has been replaced by two
>        [hostvmem] and [hostpmem] to store volatile and persistent memory
>        respectively
>     2) The single AddressSpace has been replaced by two AddressSpaces
>        [hostvmem_as] and [hostpmem_as] to map respective memdevs.
>     3) Each memory region size and total region are stored separately
>     4) The CDAT and DVSEC memory map entries have been updated:
>        a) if vmem is present, vmem is mapped at DPA(0)
>        b) if pmem is present
>           i)  and vmem is present, pmem is mapped at DPA(vmem->size)
>           ii) else, pmem is mapped at DPA(0)
>        c) partitioning of pmem is not supported in this patch set but
>           has been discussed and this design should suffice.
>     5) Read/Write functions have been updated to access AddressSpaces
>        according to the mapping described in #4
>     6) cxl-mailbox has been updated to report the respective size of
>        volatile and persistent memory regions
> 
> CXL Spec (3.0) Section 8.2.9.8.2.0 - Get Partition Info
>   Active Volatile Memory
>     The device shall provide this volatile capacity starting at DPA 0
>   Active Persistent Memory
>     The device shall provide this persistent capacity starting at the
>     DPA immediately following the volatile capacity
> 
> Partitioning of Persistent Memory regions may be supported on following
> patch sets.
> 
> Submitted as an extention to the CDAT emulation because the CDAT DSMAS
> entry concerns memory mapping and is required to successfully map memory
> regions correctly in bios/efi.

As there will be v8 of CDAT patches I expect there will be a rebase
of this patchset too.

> Gregory Price (5):
>   hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
>   hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
>   hw/mem/cxl_type: Generalize CDATDsmas initialization for Memory
>     Regions
>   hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)
>   cxl: update tests and documentation for new cxl properties
> 
>  docs/system/devices/cxl.rst |  53 ++++-
>  hw/cxl/cxl-mailbox-utils.c  |  23 +-
>  hw/mem/cxl_type3.c          | 449 +++++++++++++++++++++++-------------
>  include/hw/cxl/cxl_device.h |  11 +-
>  tests/qtest/cxl-test.c      |  81 ++++++-
>  5 files changed, 416 insertions(+), 201 deletions(-)
> 
> -- 
> 2.37.3