| Message ID | 1580428993-4767-1-git-send-email-aleksandar.markovic@rt-rk.com |
|---|---|
| Headers | show |
| Series | target/avr merger | expand |
Michael, Philippe, Can you guys do a quick checkup of this rc4? rc4, rc3,and rc2 should be functionally 100% equivalent. Thank you, Aleksandar On Fri, Jan 31, 2020 at 1:06 AM Aleksandar Markovic <aleksandar.markovic@rt-rk.com> wrote: > > From: Aleksandar Markovic <amarkovic@wavecomp.com> > > This is the AVR port from Michael, release (merge) candidate 4. > > The series can be found also in this repository: > > https://github.com/AMarkovic/qemu-avr-merger-rc4 > > History: > > Since v3: > > - Removed a patch on load_elf() modification, since it has been merged > - Removed references to CONFIG_USER_ONLY and provided a guard against > building lunux user mode for AVR > - Removed all references to 'Atmel' (including file renames) > - Rebased the code (there was common interface change regarding 'props') > - Various corrections of commit messages > - A bit field for AVRFeatures is nor 64 bit long > - Other minor fixes > > Since v2: > > - First patch is split into six smaller logical units (net result > remains the same) > - Patch "hw/core/loader: Let load_elf populate the processor-specific > flags" was redone to reflect the original intent that was lost in > transalation between multiple autors > - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was > corrected only in one line to rectify type of "e_flags" > - Patch "target/avr: Add section about AVR into QEMU documentation" > - Spurious <message-Id:> elements were removed > - The series was rebased to the latest code > > Since v1: > > - Addressed Thomas comments > - Fixed a non-critical bug in ATmega (incorrect SRAM base address) > - Added ELF parsing requested by Aleksandar > - Dropped default machine (as with the ARM port) > > Michael Rolnik (25): > target/avr: Add basic parameters for new AVR platform > target/avr: Introduce AVR CPU class object > target/avr: Add migration support > target/avr: Add GDB support > target/avr: Introduce enumeration AVRFeature > target/avr: Add defintions of AVR core types > target/avr: Add instruction helpers > target/avr: Add instruction translation - Register definitions > target/avr: Add instruction translation - Arithmetic and Logic > Instructions > target/avr: Add instruction translation - Branch Instructions > target/avr: Add instruction translation - Data Transfer Instructions > target/avr: Add instruction translation - Bit and Bit-test > Instructions > target/avr: Add instruction translation - MCU Control Instructions > target/avr: Add instruction translation - CPU main translation > function > target/avr: Add instruction disassembly function > hw/char: Add limited support for AVR USART peripheral > hw/timer: Add limited support for AVR 16-bit timer peripheral > hw/misc: Add limited support for AVR power device > target/avr: Add section about AVR into QEMU documentation > target/avr: Register AVR support with the rest of QEMU > target/avr: Add machine none test > target/avr: Update MAINTAINERS file > target/avr: Update build system > tests/boot-serial-test: Test some Arduino boards (AVR based) > tests/acceptance: Test the Arduino MEGA2560 board > > Philippe Mathieu-Daudé (4): > hw/avr: Add helper to load raw/ELF firmware binaries > hw/avr: Add some ATmega microcontrollers > hw/avr: Add some Arduino boards > .travis.yml: Run the AVR acceptance tests > > .travis.yml | 2 +- > MAINTAINERS | 31 + > arch_init.c | 2 + > configure | 7 + > default-configs/avr-softmmu.mak | 5 + > gdb-xml/avr-cpu.xml | 49 + > hw/avr/Kconfig | 9 + > hw/avr/Makefile.objs | 3 + > hw/avr/arduino.c | 151 ++ > hw/avr/atmega.c | 470 ++++++ > hw/avr/atmega.h | 48 + > hw/avr/boot.c | 74 + > hw/avr/boot.h | 33 + > hw/char/Kconfig | 3 + > hw/char/Makefile.objs | 1 + > hw/char/avr_usart.c | 320 ++++ > hw/misc/Kconfig | 3 + > hw/misc/Makefile.objs | 2 + > hw/misc/avr_power.c | 112 ++ > hw/timer/Kconfig | 3 + > hw/timer/Makefile.objs | 2 + > hw/timer/avr_timer16.c | 604 ++++++++ > include/disas/dis-asm.h | 19 + > include/elf.h | 2 + > include/hw/char/avr_usart.h | 93 ++ > include/hw/misc/avr_power.h | 46 + > include/hw/timer/avr_timer16.h | 94 ++ > include/sysemu/arch_init.h | 1 + > qapi/machine.json | 3 +- > qemu-doc.texi | 51 + > target/avr/Makefile.objs | 34 + > target/avr/cpu-param.h | 37 + > target/avr/cpu-qom.h | 54 + > target/avr/cpu.c | 818 +++++++++++ > target/avr/cpu.h | 259 ++++ > target/avr/disas.c | 246 ++++ > target/avr/gdbstub.c | 84 ++ > target/avr/helper.c | 342 +++++ > target/avr/helper.h | 29 + > target/avr/insn.decode | 182 +++ > target/avr/machine.c | 121 ++ > target/avr/translate.c | 2997 ++++++++++++++++++++++++++++++++++++++ > tests/acceptance/machine_avr6.py | 50 + > tests/qtest/Makefile.include | 2 + > tests/qtest/boot-serial-test.c | 11 + > tests/qtest/machine-none-test.c | 1 + > 46 files changed, 7508 insertions(+), 2 deletions(-) > create mode 100644 default-configs/avr-softmmu.mak > create mode 100644 gdb-xml/avr-cpu.xml > create mode 100644 hw/avr/Kconfig > create mode 100644 hw/avr/Makefile.objs > create mode 100644 hw/avr/arduino.c > create mode 100644 hw/avr/atmega.c > create mode 100644 hw/avr/atmega.h > create mode 100644 hw/avr/boot.c > create mode 100644 hw/avr/boot.h > create mode 100644 hw/char/avr_usart.c > create mode 100644 hw/misc/avr_power.c > create mode 100644 hw/timer/avr_timer16.c > create mode 100644 include/hw/char/avr_usart.h > create mode 100644 include/hw/misc/avr_power.h > create mode 100644 include/hw/timer/avr_timer16.h > create mode 100644 target/avr/Makefile.objs > create mode 100644 target/avr/cpu-param.h > create mode 100644 target/avr/cpu-qom.h > create mode 100644 target/avr/cpu.c > create mode 100644 target/avr/cpu.h > create mode 100644 target/avr/disas.c > create mode 100644 target/avr/gdbstub.c > create mode 100644 target/avr/helper.c > create mode 100644 target/avr/helper.h > create mode 100644 target/avr/insn.decode > create mode 100644 target/avr/machine.c > create mode 100644 target/avr/translate.c > create mode 100644 tests/acceptance/machine_avr6.py > > -- > 2.7.4 > >
On 1/31/20 1:12 AM, Aleksandar Markovic wrote: > Michael, Philippe, > > Can you guys do a quick checkup of this rc4? rc4, rc3,and rc2 should > be functionally 100% equivalent. Tested OK. git-backport-diff with rc2: Key: [----] : patches are identical [####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively 001/31:[down] 'target/avr: Add basic parameters for new AVR platform' 002/31:[down] 'target/avr: Introduce AVR CPU class object' 003/31:[down] 'target/avr: Add migration support' 004/31:[down] 'target/avr: Add GDB support' 005/31:[down] 'target/avr: Introduce enumeration AVRFeature' 006/31:[down] 'target/avr: Add defintions of AVR core types' 007/31:[0148] [FC] 'target/avr: Add instruction helpers' 008/31:[down] 'target/avr: Add instruction translation - Register definitions' 009/31:[----] [--] 'target/avr: Add instruction translation - Arithmetic and Logic Instructions' 010/31:[----] [--] 'target/avr: Add instruction translation - Branch Instructions' 011/31:[----] [--] 'target/avr: Add instruction translation - Data Transfer Instructions' 012/31:[----] [--] 'target/avr: Add instruction translation - Bit and Bit-test Instructions' 013/31:[----] [--] 'target/avr: Add instruction translation - MCU Control Instructions' 014/31:[----] [--] 'target/avr: Add instruction translation - CPU main translation function' 015/31:[----] [--] 'target/avr: Add instruction disassembly function' 016/31:[down] 'hw/char: Add limited support for AVR USART peripheral' 017/31:[down] 'hw/timer: Add limited support for AVR 16-bit timer peripheral' 018/31:[down] 'hw/misc: Add limited support for AVR power device' 019/31:[0012] [FC] 'target/avr: Add section about AVR into QEMU documentation' 020/31:[0002] [FC] 'target/avr: Register AVR support with the rest of QEMU' 021/31:[----] [--] 'target/avr: Add machine none test' 022/31:[0014] [FC] 'target/avr: Update MAINTAINERS file' 023/31:[0002] [FC] 'hw/avr: Add helper to load raw/ELF firmware binaries' 024/31:[0026] [FC] 'hw/avr: Add some ATmega microcontrollers' 025/31:[0009] [FC] 'hw/avr: Add some Arduino boards' 026/31:[----] [--] 'target/avr: Update build system' 027/31:[----] [--] 'tests/boot-serial-test: Test some Arduino boards (AVR based)' 028/31:[----] [--] 'tests/acceptance: Test the Arduino MEGA2560 board' 029/31:[----] [--] '.travis.yml: Run the AVR acceptance tests' 030/31:[down] '!fixup "hw/misc: Add limited support for AVR power device"' 031/31:[down] '!fixup "hw/timer: Add limited support for AVR 16-bit timer peripheral"' One thing that annoys me is we ignored the review comments from Joaquin, but I think it might now be easier to address them as new patches, once this series is merged. I made 2 comments (definitions in incorrect patch, and definition misplaced in elf.h), and sent 2 patches converting the PRINTF() to trace-events. Thanks for preparing the rc4, hopefully we are done! > > Thank you, > Aleksandar > > On Fri, Jan 31, 2020 at 1:06 AM Aleksandar Markovic > <aleksandar.markovic@rt-rk.com> wrote: >> >> From: Aleksandar Markovic <amarkovic@wavecomp.com> >> >> This is the AVR port from Michael, release (merge) candidate 4. >> >> The series can be found also in this repository: >> >> https://github.com/AMarkovic/qemu-avr-merger-rc4 >> >> History: >> >> Since v3: >> >> - Removed a patch on load_elf() modification, since it has been merged >> - Removed references to CONFIG_USER_ONLY and provided a guard against >> building lunux user mode for AVR >> - Removed all references to 'Atmel' (including file renames) >> - Rebased the code (there was common interface change regarding 'props') >> - Various corrections of commit messages >> - A bit field for AVRFeatures is nor 64 bit long >> - Other minor fixes >> >> Since v2: >> >> - First patch is split into six smaller logical units (net result >> remains the same) >> - Patch "hw/core/loader: Let load_elf populate the processor-specific >> flags" was redone to reflect the original intent that was lost in >> transalation between multiple autors >> - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was >> corrected only in one line to rectify type of "e_flags" >> - Patch "target/avr: Add section about AVR into QEMU documentation" >> - Spurious <message-Id:> elements were removed >> - The series was rebased to the latest code >> >> Since v1: >> >> - Addressed Thomas comments >> - Fixed a non-critical bug in ATmega (incorrect SRAM base address) >> - Added ELF parsing requested by Aleksandar >> - Dropped default machine (as with the ARM port) >> >> Michael Rolnik (25): >> target/avr: Add basic parameters for new AVR platform >> target/avr: Introduce AVR CPU class object >> target/avr: Add migration support >> target/avr: Add GDB support >> target/avr: Introduce enumeration AVRFeature >> target/avr: Add defintions of AVR core types >> target/avr: Add instruction helpers >> target/avr: Add instruction translation - Register definitions >> target/avr: Add instruction translation - Arithmetic and Logic >> Instructions >> target/avr: Add instruction translation - Branch Instructions >> target/avr: Add instruction translation - Data Transfer Instructions >> target/avr: Add instruction translation - Bit and Bit-test >> Instructions >> target/avr: Add instruction translation - MCU Control Instructions >> target/avr: Add instruction translation - CPU main translation >> function >> target/avr: Add instruction disassembly function >> hw/char: Add limited support for AVR USART peripheral >> hw/timer: Add limited support for AVR 16-bit timer peripheral >> hw/misc: Add limited support for AVR power device >> target/avr: Add section about AVR into QEMU documentation >> target/avr: Register AVR support with the rest of QEMU >> target/avr: Add machine none test >> target/avr: Update MAINTAINERS file >> target/avr: Update build system >> tests/boot-serial-test: Test some Arduino boards (AVR based) >> tests/acceptance: Test the Arduino MEGA2560 board >> >> Philippe Mathieu-Daudé (4): >> hw/avr: Add helper to load raw/ELF firmware binaries >> hw/avr: Add some ATmega microcontrollers >> hw/avr: Add some Arduino boards >> .travis.yml: Run the AVR acceptance tests >> >> .travis.yml | 2 +- >> MAINTAINERS | 31 + >> arch_init.c | 2 + >> configure | 7 + >> default-configs/avr-softmmu.mak | 5 + >> gdb-xml/avr-cpu.xml | 49 + >> hw/avr/Kconfig | 9 + >> hw/avr/Makefile.objs | 3 + >> hw/avr/arduino.c | 151 ++ >> hw/avr/atmega.c | 470 ++++++ >> hw/avr/atmega.h | 48 + >> hw/avr/boot.c | 74 + >> hw/avr/boot.h | 33 + >> hw/char/Kconfig | 3 + >> hw/char/Makefile.objs | 1 + >> hw/char/avr_usart.c | 320 ++++ >> hw/misc/Kconfig | 3 + >> hw/misc/Makefile.objs | 2 + >> hw/misc/avr_power.c | 112 ++ >> hw/timer/Kconfig | 3 + >> hw/timer/Makefile.objs | 2 + >> hw/timer/avr_timer16.c | 604 ++++++++ >> include/disas/dis-asm.h | 19 + >> include/elf.h | 2 + >> include/hw/char/avr_usart.h | 93 ++ >> include/hw/misc/avr_power.h | 46 + >> include/hw/timer/avr_timer16.h | 94 ++ >> include/sysemu/arch_init.h | 1 + >> qapi/machine.json | 3 +- >> qemu-doc.texi | 51 + >> target/avr/Makefile.objs | 34 + >> target/avr/cpu-param.h | 37 + >> target/avr/cpu-qom.h | 54 + >> target/avr/cpu.c | 818 +++++++++++ >> target/avr/cpu.h | 259 ++++ >> target/avr/disas.c | 246 ++++ >> target/avr/gdbstub.c | 84 ++ >> target/avr/helper.c | 342 +++++ >> target/avr/helper.h | 29 + >> target/avr/insn.decode | 182 +++ >> target/avr/machine.c | 121 ++ >> target/avr/translate.c | 2997 ++++++++++++++++++++++++++++++++++++++ >> tests/acceptance/machine_avr6.py | 50 + >> tests/qtest/Makefile.include | 2 + >> tests/qtest/boot-serial-test.c | 11 + >> tests/qtest/machine-none-test.c | 1 + >> 46 files changed, 7508 insertions(+), 2 deletions(-) >> create mode 100644 default-configs/avr-softmmu.mak >> create mode 100644 gdb-xml/avr-cpu.xml >> create mode 100644 hw/avr/Kconfig >> create mode 100644 hw/avr/Makefile.objs >> create mode 100644 hw/avr/arduino.c >> create mode 100644 hw/avr/atmega.c >> create mode 100644 hw/avr/atmega.h >> create mode 100644 hw/avr/boot.c >> create mode 100644 hw/avr/boot.h >> create mode 100644 hw/char/avr_usart.c >> create mode 100644 hw/misc/avr_power.c >> create mode 100644 hw/timer/avr_timer16.c >> create mode 100644 include/hw/char/avr_usart.h >> create mode 100644 include/hw/misc/avr_power.h >> create mode 100644 include/hw/timer/avr_timer16.h >> create mode 100644 target/avr/Makefile.objs >> create mode 100644 target/avr/cpu-param.h >> create mode 100644 target/avr/cpu-qom.h >> create mode 100644 target/avr/cpu.c >> create mode 100644 target/avr/cpu.h >> create mode 100644 target/avr/disas.c >> create mode 100644 target/avr/gdbstub.c >> create mode 100644 target/avr/helper.c >> create mode 100644 target/avr/helper.h >> create mode 100644 target/avr/insn.decode >> create mode 100644 target/avr/machine.c >> create mode 100644 target/avr/translate.c >> create mode 100644 tests/acceptance/machine_avr6.py >> >> -- >> 2.7.4 >> >> >
Looks good. Thanks On Fri, Jan 31, 2020 at 3:24 AM Philippe Mathieu-Daudé <philmd@redhat.com> wrote: > On 1/31/20 1:12 AM, Aleksandar Markovic wrote: > > Michael, Philippe, > > > > Can you guys do a quick checkup of this rc4? rc4, rc3,and rc2 should > > be functionally 100% equivalent. > > Tested OK. > > git-backport-diff with rc2: > > Key: > [----] : patches are identical > [####] : number of functional differences between upstream/downstream patch > [down] : patch is downstream-only > The flags [FC] indicate (F)unctional and (C)ontextual differences, > respectively > > 001/31:[down] 'target/avr: Add basic parameters for new AVR platform' > 002/31:[down] 'target/avr: Introduce AVR CPU class object' > 003/31:[down] 'target/avr: Add migration support' > 004/31:[down] 'target/avr: Add GDB support' > 005/31:[down] 'target/avr: Introduce enumeration AVRFeature' > 006/31:[down] 'target/avr: Add defintions of AVR core types' > 007/31:[0148] [FC] 'target/avr: Add instruction helpers' > 008/31:[down] 'target/avr: Add instruction translation - Register > definitions' > 009/31:[----] [--] 'target/avr: Add instruction translation - Arithmetic > and Logic Instructions' > 010/31:[----] [--] 'target/avr: Add instruction translation - Branch > Instructions' > 011/31:[----] [--] 'target/avr: Add instruction translation - Data > Transfer Instructions' > 012/31:[----] [--] 'target/avr: Add instruction translation - Bit and > Bit-test Instructions' > 013/31:[----] [--] 'target/avr: Add instruction translation - MCU > Control Instructions' > 014/31:[----] [--] 'target/avr: Add instruction translation - CPU main > translation function' > 015/31:[----] [--] 'target/avr: Add instruction disassembly function' > 016/31:[down] 'hw/char: Add limited support for AVR USART peripheral' > 017/31:[down] 'hw/timer: Add limited support for AVR 16-bit timer > peripheral' > 018/31:[down] 'hw/misc: Add limited support for AVR power device' > 019/31:[0012] [FC] 'target/avr: Add section about AVR into QEMU > documentation' > 020/31:[0002] [FC] 'target/avr: Register AVR support with the rest of QEMU' > 021/31:[----] [--] 'target/avr: Add machine none test' > 022/31:[0014] [FC] 'target/avr: Update MAINTAINERS file' > 023/31:[0002] [FC] 'hw/avr: Add helper to load raw/ELF firmware binaries' > 024/31:[0026] [FC] 'hw/avr: Add some ATmega microcontrollers' > 025/31:[0009] [FC] 'hw/avr: Add some Arduino boards' > 026/31:[----] [--] 'target/avr: Update build system' > 027/31:[----] [--] 'tests/boot-serial-test: Test some Arduino boards > (AVR based)' > 028/31:[----] [--] 'tests/acceptance: Test the Arduino MEGA2560 board' > 029/31:[----] [--] '.travis.yml: Run the AVR acceptance tests' > 030/31:[down] '!fixup "hw/misc: Add limited support for AVR power device"' > 031/31:[down] '!fixup "hw/timer: Add limited support for AVR 16-bit > timer peripheral"' > > One thing that annoys me is we ignored the review comments from Joaquin, > but I think it might now be easier to address them as new patches, once > this series is merged. > > I made 2 comments (definitions in incorrect patch, and definition > misplaced in elf.h), and sent 2 patches converting the PRINTF() to > trace-events. Thanks for preparing the rc4, hopefully we are done! > > > > > Thank you, > > Aleksandar > > > > On Fri, Jan 31, 2020 at 1:06 AM Aleksandar Markovic > > <aleksandar.markovic@rt-rk.com> wrote: > >> > >> From: Aleksandar Markovic <amarkovic@wavecomp.com> > >> > >> This is the AVR port from Michael, release (merge) candidate 4. > >> > >> The series can be found also in this repository: > >> > >> https://github.com/AMarkovic/qemu-avr-merger-rc4 > >> > >> History: > >> > >> Since v3: > >> > >> - Removed a patch on load_elf() modification, since it has been merged > >> - Removed references to CONFIG_USER_ONLY and provided a guard against > >> building lunux user mode for AVR > >> - Removed all references to 'Atmel' (including file renames) > >> - Rebased the code (there was common interface change regarding 'props') > >> - Various corrections of commit messages > >> - A bit field for AVRFeatures is nor 64 bit long > >> - Other minor fixes > >> > >> Since v2: > >> > >> - First patch is split into six smaller logical units (net result > >> remains the same) > >> - Patch "hw/core/loader: Let load_elf populate the processor-specific > >> flags" was redone to reflect the original intent that was lost in > >> transalation between multiple autors > >> - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was > >> corrected only in one line to rectify type of "e_flags" > >> - Patch "target/avr: Add section about AVR into QEMU documentation" > >> - Spurious <message-Id:> elements were removed > >> - The series was rebased to the latest code > >> > >> Since v1: > >> > >> - Addressed Thomas comments > >> - Fixed a non-critical bug in ATmega (incorrect SRAM base address) > >> - Added ELF parsing requested by Aleksandar > >> - Dropped default machine (as with the ARM port) > >> > >> Michael Rolnik (25): > >> target/avr: Add basic parameters for new AVR platform > >> target/avr: Introduce AVR CPU class object > >> target/avr: Add migration support > >> target/avr: Add GDB support > >> target/avr: Introduce enumeration AVRFeature > >> target/avr: Add defintions of AVR core types > >> target/avr: Add instruction helpers > >> target/avr: Add instruction translation - Register definitions > >> target/avr: Add instruction translation - Arithmetic and Logic > >> Instructions > >> target/avr: Add instruction translation - Branch Instructions > >> target/avr: Add instruction translation - Data Transfer Instructions > >> target/avr: Add instruction translation - Bit and Bit-test > >> Instructions > >> target/avr: Add instruction translation - MCU Control Instructions > >> target/avr: Add instruction translation - CPU main translation > >> function > >> target/avr: Add instruction disassembly function > >> hw/char: Add limited support for AVR USART peripheral > >> hw/timer: Add limited support for AVR 16-bit timer peripheral > >> hw/misc: Add limited support for AVR power device > >> target/avr: Add section about AVR into QEMU documentation > >> target/avr: Register AVR support with the rest of QEMU > >> target/avr: Add machine none test > >> target/avr: Update MAINTAINERS file > >> target/avr: Update build system > >> tests/boot-serial-test: Test some Arduino boards (AVR based) > >> tests/acceptance: Test the Arduino MEGA2560 board > >> > >> Philippe Mathieu-Daudé (4): > >> hw/avr: Add helper to load raw/ELF firmware binaries > >> hw/avr: Add some ATmega microcontrollers > >> hw/avr: Add some Arduino boards > >> .travis.yml: Run the AVR acceptance tests > >> > >> .travis.yml | 2 +- > >> MAINTAINERS | 31 + > >> arch_init.c | 2 + > >> configure | 7 + > >> default-configs/avr-softmmu.mak | 5 + > >> gdb-xml/avr-cpu.xml | 49 + > >> hw/avr/Kconfig | 9 + > >> hw/avr/Makefile.objs | 3 + > >> hw/avr/arduino.c | 151 ++ > >> hw/avr/atmega.c | 470 ++++++ > >> hw/avr/atmega.h | 48 + > >> hw/avr/boot.c | 74 + > >> hw/avr/boot.h | 33 + > >> hw/char/Kconfig | 3 + > >> hw/char/Makefile.objs | 1 + > >> hw/char/avr_usart.c | 320 ++++ > >> hw/misc/Kconfig | 3 + > >> hw/misc/Makefile.objs | 2 + > >> hw/misc/avr_power.c | 112 ++ > >> hw/timer/Kconfig | 3 + > >> hw/timer/Makefile.objs | 2 + > >> hw/timer/avr_timer16.c | 604 ++++++++ > >> include/disas/dis-asm.h | 19 + > >> include/elf.h | 2 + > >> include/hw/char/avr_usart.h | 93 ++ > >> include/hw/misc/avr_power.h | 46 + > >> include/hw/timer/avr_timer16.h | 94 ++ > >> include/sysemu/arch_init.h | 1 + > >> qapi/machine.json | 3 +- > >> qemu-doc.texi | 51 + > >> target/avr/Makefile.objs | 34 + > >> target/avr/cpu-param.h | 37 + > >> target/avr/cpu-qom.h | 54 + > >> target/avr/cpu.c | 818 +++++++++++ > >> target/avr/cpu.h | 259 ++++ > >> target/avr/disas.c | 246 ++++ > >> target/avr/gdbstub.c | 84 ++ > >> target/avr/helper.c | 342 +++++ > >> target/avr/helper.h | 29 + > >> target/avr/insn.decode | 182 +++ > >> target/avr/machine.c | 121 ++ > >> target/avr/translate.c | 2997 > ++++++++++++++++++++++++++++++++++++++ > >> tests/acceptance/machine_avr6.py | 50 + > >> tests/qtest/Makefile.include | 2 + > >> tests/qtest/boot-serial-test.c | 11 + > >> tests/qtest/machine-none-test.c | 1 + > >> 46 files changed, 7508 insertions(+), 2 deletions(-) > >> create mode 100644 default-configs/avr-softmmu.mak > >> create mode 100644 gdb-xml/avr-cpu.xml > >> create mode 100644 hw/avr/Kconfig > >> create mode 100644 hw/avr/Makefile.objs > >> create mode 100644 hw/avr/arduino.c > >> create mode 100644 hw/avr/atmega.c > >> create mode 100644 hw/avr/atmega.h > >> create mode 100644 hw/avr/boot.c > >> create mode 100644 hw/avr/boot.h > >> create mode 100644 hw/char/avr_usart.c > >> create mode 100644 hw/misc/avr_power.c > >> create mode 100644 hw/timer/avr_timer16.c > >> create mode 100644 include/hw/char/avr_usart.h > >> create mode 100644 include/hw/misc/avr_power.h > >> create mode 100644 include/hw/timer/avr_timer16.h > >> create mode 100644 target/avr/Makefile.objs > >> create mode 100644 target/avr/cpu-param.h > >> create mode 100644 target/avr/cpu-qom.h > >> create mode 100644 target/avr/cpu.c > >> create mode 100644 target/avr/cpu.h > >> create mode 100644 target/avr/disas.c > >> create mode 100644 target/avr/gdbstub.c > >> create mode 100644 target/avr/helper.c > >> create mode 100644 target/avr/helper.h > >> create mode 100644 target/avr/insn.decode > >> create mode 100644 target/avr/machine.c > >> create mode 100644 target/avr/translate.c > >> create mode 100644 tests/acceptance/machine_avr6.py > >> > >> -- > >> 2.7.4 > >> > >> > > > >
From: Aleksandar Markovic <amarkovic@wavecomp.com> This is the AVR port from Michael, release (merge) candidate 4. The series can be found also in this repository: https://github.com/AMarkovic/qemu-avr-merger-rc4 History: Since v3: - Removed a patch on load_elf() modification, since it has been merged - Removed references to CONFIG_USER_ONLY and provided a guard against building lunux user mode for AVR - Removed all references to 'Atmel' (including file renames) - Rebased the code (there was common interface change regarding 'props') - Various corrections of commit messages - A bit field for AVRFeatures is nor 64 bit long - Other minor fixes Since v2: - First patch is split into six smaller logical units (net result remains the same) - Patch "hw/core/loader: Let load_elf populate the processor-specific flags" was redone to reflect the original intent that was lost in transalation between multiple autors - Patch "hw/avr: Add helper to load raw/ELF firmware binaries" was corrected only in one line to rectify type of "e_flags" - Patch "target/avr: Add section about AVR into QEMU documentation" - Spurious <message-Id:> elements were removed - The series was rebased to the latest code Since v1: - Addressed Thomas comments - Fixed a non-critical bug in ATmega (incorrect SRAM base address) - Added ELF parsing requested by Aleksandar - Dropped default machine (as with the ARM port) Michael Rolnik (25): target/avr: Add basic parameters for new AVR platform target/avr: Introduce AVR CPU class object target/avr: Add migration support target/avr: Add GDB support target/avr: Introduce enumeration AVRFeature target/avr: Add defintions of AVR core types target/avr: Add instruction helpers target/avr: Add instruction translation - Register definitions target/avr: Add instruction translation - Arithmetic and Logic Instructions target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test Instructions target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation function target/avr: Add instruction disassembly function hw/char: Add limited support for AVR USART peripheral hw/timer: Add limited support for AVR 16-bit timer peripheral hw/misc: Add limited support for AVR power device target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test target/avr: Update MAINTAINERS file target/avr: Update build system tests/boot-serial-test: Test some Arduino boards (AVR based) tests/acceptance: Test the Arduino MEGA2560 board Philippe Mathieu-Daudé (4): hw/avr: Add helper to load raw/ELF firmware binaries hw/avr: Add some ATmega microcontrollers hw/avr: Add some Arduino boards .travis.yml: Run the AVR acceptance tests .travis.yml | 2 +- MAINTAINERS | 31 + arch_init.c | 2 + configure | 7 + default-configs/avr-softmmu.mak | 5 + gdb-xml/avr-cpu.xml | 49 + hw/avr/Kconfig | 9 + hw/avr/Makefile.objs | 3 + hw/avr/arduino.c | 151 ++ hw/avr/atmega.c | 470 ++++++ hw/avr/atmega.h | 48 + hw/avr/boot.c | 74 + hw/avr/boot.h | 33 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/char/avr_usart.c | 320 ++++ hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/misc/avr_power.c | 112 ++ hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + hw/timer/avr_timer16.c | 604 ++++++++ include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 ++ include/hw/misc/avr_power.h | 46 + include/hw/timer/avr_timer16.h | 94 ++ include/sysemu/arch_init.h | 1 + qapi/machine.json | 3 +- qemu-doc.texi | 51 + target/avr/Makefile.objs | 34 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.c | 818 +++++++++++ target/avr/cpu.h | 259 ++++ target/avr/disas.c | 246 ++++ target/avr/gdbstub.c | 84 ++ target/avr/helper.c | 342 +++++ target/avr/helper.h | 29 + target/avr/insn.decode | 182 +++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2997 ++++++++++++++++++++++++++++++++++++++ tests/acceptance/machine_avr6.py | 50 + tests/qtest/Makefile.include | 2 + tests/qtest/boot-serial-test.c | 11 + tests/qtest/machine-none-test.c | 1 + 46 files changed, 7508 insertions(+), 2 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 hw/avr/arduino.c create mode 100644 hw/avr/atmega.c create mode 100644 hw/avr/atmega.h create mode 100644 hw/avr/boot.c create mode 100644 hw/avr/boot.h create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_power.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_power.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.c create mode 100644 target/avr/cpu.h create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/helper.h create mode 100644 target/avr/insn.decode create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 tests/acceptance/machine_avr6.py