diff mbox series

[ovs-dev,1/2] ovn-northd: Rename ovn-northd.c to northd.c

Message ID 20210826190422.61012-2-mark.d.gray@redhat.com
State Superseded
Headers show
Series northd: Split northd | expand

Checks

Context Check Description
ovsrobot/apply-robot warning apply and check: warning
ovsrobot/github-robot-_Build_and_Test success github build: passed
ovsrobot/github-robot-_ovn-kubernetes success github build: passed

Commit Message

Mark Gray Aug. 26, 2021, 7:04 p.m. UTC
In order to seperate the northd processing logic from the ovn-northd
application logic, rename ovn-northd. In this way, we can recreate
ovn-northd.c with only the application logic.

Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
---
 Documentation/tutorials/ovn-openstack.rst | 154 +++++++++++-----------
 northd/automake.mk                        |   2 +-
 northd/lrouter.dl                         |   2 +-
 northd/{ovn-northd.c => northd.c}         |   4 +-
 northd/ovn.rs                             |   2 +-
 northd/ovn_northd.dl                      |   2 +-
 tests/ovn-northd.at                       |   2 +-
 7 files changed, 84 insertions(+), 84 deletions(-)
 rename northd/{ovn-northd.c => northd.c} (99%)

Comments

0-day Robot Aug. 26, 2021, 8:51 p.m. UTC | #1
Bleep bloop.  Greetings Mark Gray, I am a robot and I have tried out your patch.
Thanks for your contribution.

I encountered some error that I wasn't expecting.  See the details below.


checkpatch:
WARNING: Line is 117 characters long (recommended limit is 79)
#31 FILE: Documentation/tutorials/ovn-openstack.rst:780:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a

WARNING: Line is 117 characters long (recommended limit is 79)
#40 FILE: Documentation/tutorials/ovn-openstack.rst:793:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a

WARNING: Line is 93 characters long (recommended limit is 79)
#43 FILE: Documentation/tutorials/ovn-openstack.rst:795:
  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:99:7a:17, priority 50, uuid 57a4c46f

WARNING: Line is 119 characters long (recommended limit is 79)
#50 FILE: Documentation/tutorials/ovn-openstack.rst:801:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "bp" && eth.dst == {fa:16:3e:99:7a:17}, priority 50, uuid 8aa6426d

WARNING: Line is 117 characters long (recommended limit is 79)
#59 FILE: Documentation/tutorials/ovn-openstack.rst:1217:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a

WARNING: Line is 140 characters long (recommended limit is 79)
#62 FILE: Documentation/tutorials/ovn-openstack.rst:1219:
   1. ls_in_port_sec_ip (northd.c:2364): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == {10.1.1.5}, priority 90, uuid 343af48c

WARNING: Line is 83 characters long (recommended limit is 79)
#69 FILE: Documentation/tutorials/ovn-openstack.rst:1224:
   5. ls_in_pre_stateful (northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634

WARNING: Line is 143 characters long (recommended limit is 79)
#75 FILE: Documentation/tutorials/ovn-openstack.rst:1229:
   6. ls_in_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip4), priority 2002, uuid a12b39f0

WARNING: Line is 93 characters long (recommended limit is 79)
#78 FILE: Documentation/tutorials/ovn-openstack.rst:1231:
  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:f6:e2:8f, priority 50, uuid c43ead31

WARNING: Line is 92 characters long (recommended limit is 79)
#85 FILE: Documentation/tutorials/ovn-openstack.rst:1237:
   1. ls_out_pre_acl (northd.c:2626): ip && outport == "17d870", priority 110, uuid 60395450

WARNING: Line is 89 characters long (recommended limit is 79)
#88 FILE: Documentation/tutorials/ovn-openstack.rst:1239:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "17d870", priority 50, uuid 91b5cab0

WARNING: Line is 121 characters long (recommended limit is 79)
#97 FILE: Documentation/tutorials/ovn-openstack.rst:1253:
   0. lr_in_admission (northd.c:4071): eth.dst == fa:16:3e:f6:e2:8f && inport == "lrp-17d870", priority 50, uuid fa5270b0

WARNING: Line is 90 characters long (recommended limit is 79)
#100 FILE: Documentation/tutorials/ovn-openstack.rst:1255:
   5. lr_in_ip_routing (northd.c:3782): ip4.dst == 10.1.2.0/24, priority 49, uuid 5f9d469f

WARNING: Line is 113 characters long (recommended limit is 79)
#109 FILE: Documentation/tutorials/ovn-openstack.rst:1263:
   6. lr_in_arp_resolve (northd.c:5088): outport == "lrp-82b983" && reg0 == 10.1.2.7, priority 100, uuid 03d506d3

WARNING: Line is 91 characters long (recommended limit is 79)
#119 FILE: Documentation/tutorials/ovn-openstack.rst:1271:
   3. lr_out_delivery (northd.c:5288): outport == "lrp-82b983", priority 100, uuid 00bea4f2

WARNING: Line is 87 characters long (recommended limit is 79)
#128 FILE: Documentation/tutorials/ovn-openstack.rst:1280:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "82b983", priority 50, uuid 9a789e06

WARNING: Line is 90 characters long (recommended limit is 79)
#131 FILE: Documentation/tutorials/ovn-openstack.rst:1282:
   3. ls_in_pre_acl (northd.c:2624): ip && inport == "82b983", priority 110, uuid ab52f21a

WARNING: Line is 93 characters long (recommended limit is 79)
#134 FILE: Documentation/tutorials/ovn-openstack.rst:1284:
  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:89:f2:36, priority 50, uuid dcafb3e9

WARNING: Line is 84 characters long (recommended limit is 79)
#145 FILE: Documentation/tutorials/ovn-openstack.rst:1293:
   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 9e8e22c5

WARNING: Line is 204 characters long (recommended limit is 79)
#151 FILE: Documentation/tutorials/ovn-openstack.rst:1298:
   4. ls_out_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "cp" && ip4 && ip4.src == $as_ip4_0fc1b6cf_f925_49e6_8f00_6dd13beca9dc), priority 2002, uuid a746fa0d

WARNING: Line is 172 characters long (recommended limit is 79)
#154 FILE: Documentation/tutorials/ovn-openstack.rst:1300:
   7. ls_out_port_sec_ip (northd.c:2364): outport == "cp" && eth.dst == fa:16:3e:89:f2:36 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.1.2.7}, priority 90, uuid 4d9862b5

WARNING: Line is 119 characters long (recommended limit is 79)
#157 FILE: Documentation/tutorials/ovn-openstack.rst:1302:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "cp" && eth.dst == {fa:16:3e:89:f2:36}, priority 50, uuid 0242cdc3

WARNING: Line is 95 characters long (recommended limit is 79)
#166 FILE: Documentation/tutorials/ovn-openstack.rst:1445:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "provnet-d1ac28", priority 50, uuid 8d86fb06

WARNING: Line is 92 characters long (recommended limit is 79)
#169 FILE: Documentation/tutorials/ovn-openstack.rst:1447:
  10. ls_in_arp_rsp (northd.c:3266): inport == "provnet-d1ac28", priority 100, uuid 21313eff

WARNING: Line is 133 characters long (recommended limit is 79)
#172 FILE: Documentation/tutorials/ovn-openstack.rst:1449:
  13. ls_in_l2_lkup (northd.c:3571): eth.dst == fa:16:3e:b2:d2:67 && is_chassis_resident("cr-lrp-ae9b52"), priority 50, uuid 7f28f51f

WARNING: Line is 89 characters long (recommended limit is 79)
#179 FILE: Documentation/tutorials/ovn-openstack.rst:1455:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "ae9b52", priority 50, uuid 72fea396

WARNING: Line is 161 characters long (recommended limit is 79)
#188 FILE: Documentation/tutorials/ovn-openstack.rst:1467:
   0. lr_in_admission (northd.c:4071): eth.dst == fa:16:3e:b2:d2:67 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 50, uuid 8c6945c2

WARNING: Line is 158 characters long (recommended limit is 79)
#191 FILE: Documentation/tutorials/ovn-openstack.rst:1469:
   3. lr_in_unsnat (northd.c:4591): ip && ip4.dst == 172.24.4.8 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 100, uuid e922f541

WARNING: Line is 156 characters long (recommended limit is 79)
#197 FILE: Documentation/tutorials/ovn-openstack.rst:1474:
   4. lr_in_dnat (northd.c:4649): ip && ip4.dst == 172.24.4.8 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 100, uuid 02f41b79

WARNING: Line is 90 characters long (recommended limit is 79)
#206 FILE: Documentation/tutorials/ovn-openstack.rst:1482:
   5. lr_in_ip_routing (northd.c:3782): ip4.dst == 10.0.0.0/26, priority 53, uuid 86e005b0

WARNING: Line is 113 characters long (recommended limit is 79)
#215 FILE: Documentation/tutorials/ovn-openstack.rst:1490:
   6. lr_in_arp_resolve (northd.c:5088): outport == "lrp-f264e7" && reg0 == 10.0.0.6, priority 100, uuid 2963d67c

WARNING: Line is 91 characters long (recommended limit is 79)
#225 FILE: Documentation/tutorials/ovn-openstack.rst:1498:
   3. lr_out_delivery (northd.c:5288): outport == "lrp-f264e7", priority 100, uuid 42dadc23

WARNING: Line is 87 characters long (recommended limit is 79)
#234 FILE: Documentation/tutorials/ovn-openstack.rst:1507:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "f264e7", priority 50, uuid 5b721214

WARNING: Line is 90 characters long (recommended limit is 79)
#237 FILE: Documentation/tutorials/ovn-openstack.rst:1509:
   3. ls_in_pre_acl (northd.c:2624): ip && inport == "f264e7", priority 110, uuid 5bdc3209

WARNING: Line is 93 characters long (recommended limit is 79)
#240 FILE: Documentation/tutorials/ovn-openstack.rst:1511:
  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:c1:f5:a2, priority 50, uuid 7957f80f

WARNING: Line is 84 characters long (recommended limit is 79)
#251 FILE: Documentation/tutorials/ovn-openstack.rst:1520:
   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 247e02eb

WARNING: Line is 178 characters long (recommended limit is 79)
#257 FILE: Documentation/tutorials/ovn-openstack.rst:1525:
   4. ls_out_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "dp" && ip4 && ip4.src == 0.0.0.0/0 && icmp4), priority 2002, uuid b860fc9f

WARNING: Line is 172 characters long (recommended limit is 79)
#260 FILE: Documentation/tutorials/ovn-openstack.rst:1527:
   7. ls_out_port_sec_ip (northd.c:2364): outport == "dp" && eth.dst == fa:16:3e:c1:f5:a2 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.0.0.6}, priority 90, uuid 15655a98

WARNING: Line is 119 characters long (recommended limit is 79)
#263 FILE: Documentation/tutorials/ovn-openstack.rst:1529:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "dp" && eth.dst == {fa:16:3e:c1:f5:a2}, priority 50, uuid 5916f94b

WARNING: Line is 117 characters long (recommended limit is 79)
#272 FILE: Documentation/tutorials/ovn-openstack.rst:1625:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a

WARNING: Line is 166 characters long (recommended limit is 79)
#275 FILE: Documentation/tutorials/ovn-openstack.rst:1627:
   1. ls_in_port_sec_ip (northd.c:2390): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip6.src == {fe80::f816:3eff:fea9:4cc7, fc11::5}, priority 90, uuid 604810ea

WARNING: Line is 83 characters long (recommended limit is 79)
#282 FILE: Documentation/tutorials/ovn-openstack.rst:1632:
   5. ls_in_pre_stateful (northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634

WARNING: Line is 143 characters long (recommended limit is 79)
#288 FILE: Documentation/tutorials/ovn-openstack.rst:1637:
   6. ls_in_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip6), priority 2002, uuid 7fdd607e

WARNING: Line is 93 characters long (recommended limit is 79)
#291 FILE: Documentation/tutorials/ovn-openstack.rst:1639:
  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:ef:2f:8b, priority 50, uuid e1d87fc5

WARNING: Line is 92 characters long (recommended limit is 79)
#298 FILE: Documentation/tutorials/ovn-openstack.rst:1645:
   1. ls_out_pre_acl (northd.c:2626): ip && outport == "ad952e", priority 110, uuid 88f68988

WARNING: Line is 89 characters long (recommended limit is 79)
#301 FILE: Documentation/tutorials/ovn-openstack.rst:1647:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "ad952e", priority 50, uuid 5935755e

WARNING: Line is 121 characters long (recommended limit is 79)
#308 FILE: Documentation/tutorials/ovn-openstack.rst:1653:
   0. lr_in_admission (northd.c:4071): eth.dst == fa:16:3e:ef:2f:8b && inport == "lrp-ad952e", priority 50, uuid ddfeb712

WARNING: Line is 89 characters long (recommended limit is 79)
#311 FILE: Documentation/tutorials/ovn-openstack.rst:1655:
   5. lr_in_ip_routing (northd.c:3782): ip6.dst == fc22::/64, priority 129, uuid cc2130ec

WARNING: Line is 114 characters long (recommended limit is 79)
#320 FILE: Documentation/tutorials/ovn-openstack.rst:1663:
   6. lr_in_arp_resolve (northd.c:5122): outport == "lrp-1a8162" && xxreg0 == fc22::7, priority 100, uuid bcf75288

WARNING: Line is 91 characters long (recommended limit is 79)
#330 FILE: Documentation/tutorials/ovn-openstack.rst:1671:
   3. lr_out_delivery (northd.c:5288): outport == "lrp-1a8162", priority 100, uuid 5260dfc5

WARNING: Line is 87 characters long (recommended limit is 79)
#337 FILE: Documentation/tutorials/ovn-openstack.rst:1677:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "1a8162", priority 50, uuid 10957d1b

WARNING: Line is 90 characters long (recommended limit is 79)
#340 FILE: Documentation/tutorials/ovn-openstack.rst:1679:
   3. ls_in_pre_acl (northd.c:2624): ip && inport == "1a8162", priority 110, uuid a27ebd00

WARNING: Line is 93 characters long (recommended limit is 79)
#343 FILE: Documentation/tutorials/ovn-openstack.rst:1681:
  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:89:f2:36, priority 50, uuid dcafb3e9

WARNING: Line is 84 characters long (recommended limit is 79)
#354 FILE: Documentation/tutorials/ovn-openstack.rst:1690:
   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 9e8e22c5

WARNING: Line is 204 characters long (recommended limit is 79)
#360 FILE: Documentation/tutorials/ovn-openstack.rst:1695:
   4. ls_out_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "cp" && ip6 && ip6.src == $as_ip6_0fc1b6cf_f925_49e6_8f00_6dd13beca9dc), priority 2002, uuid 12fc96f9

WARNING: Line is 178 characters long (recommended limit is 79)
#363 FILE: Documentation/tutorials/ovn-openstack.rst:1697:
   7. ls_out_port_sec_ip (northd.c:2390): outport == "cp" && eth.dst == fa:16:3e:89:f2:36 && ip6.dst == {fe80::f816:3eff:fe89:f236, ff00::/8, fc22::7}, priority 90, uuid c622596a

WARNING: Line is 119 characters long (recommended limit is 79)
#366 FILE: Documentation/tutorials/ovn-openstack.rst:1699:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "cp" && eth.dst == {fa:16:3e:89:f2:36}, priority 50, uuid 0242cdc3

WARNING: Line is 117 characters long (recommended limit is 79)
#375 FILE: Documentation/tutorials/ovn-openstack.rst:1885:
   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a

WARNING: Line is 201 characters long (recommended limit is 79)
#378 FILE: Documentation/tutorials/ovn-openstack.rst:1887:
   1. ls_in_port_sec_ip (northd.c:2325): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == 0.0.0.0 && ip4.dst == 255.255.255.255 && udp.src == 68 && udp.dst == 67, priority 90, uuid e46bed6f

WARNING: Line is 83 characters long (recommended limit is 79)
#385 FILE: Documentation/tutorials/ovn-openstack.rst:1892:
   5. ls_in_pre_stateful (northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634

WARNING: Line is 229 characters long (recommended limit is 79)
#394 FILE: Documentation/tutorials/ovn-openstack.rst:1901:
   6. ls_in_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip4 && ip4.dst == {255.255.255.255, 10.1.1.0/24} && udp && udp.src == 68 && udp.dst == 67), priority 2002, uuid 9c90245d

WARNING: Line is 203 characters long (recommended limit is 79)
#397 FILE: Documentation/tutorials/ovn-openstack.rst:1903:
  11. ls_in_dhcp_options (northd.c:3409): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == 0.0.0.0 && ip4.dst == 255.255.255.255 && udp.src == 68 && udp.dst == 67, priority 100, uuid 8d63f29c

WARNING: Line is 170 characters long (recommended limit is 79)
#402 FILE: Documentation/tutorials/ovn-openstack.rst:1907:
  12. ls_in_dhcp_response (northd.c:3438): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4 && udp.src == 68 && udp.dst == 67 && reg0[3], priority 100, uuid 995eeaa9

WARNING: Line is 84 characters long (recommended limit is 79)
#415 FILE: Documentation/tutorials/ovn-openstack.rst:1926:
   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 0c066ea1

WARNING: Line is 176 characters long (recommended limit is 79)
#421 FILE: Documentation/tutorials/ovn-openstack.rst:1931:
   4. ls_out_acl (northd.c:3008): outport == "ap" && eth.src == fa:16:3e:bb:94:72 && ip4.src == 10.1.1.1 && udp && udp.src == 67 && udp.dst == 68, priority 34000, uuid 0b383e77

WARNING: Line is 172 characters long (recommended limit is 79)
#425 FILE: Documentation/tutorials/ovn-openstack.rst:1934:
   7. ls_out_port_sec_ip (northd.c:2364): outport == "ap" && eth.dst == fa:16:3e:a9:4c:c7 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.1.1.5}, priority 90, uuid 7b8cbcd5

WARNING: Line is 119 characters long (recommended limit is 79)
#428 FILE: Documentation/tutorials/ovn-openstack.rst:1936:
   8. ls_out_port_sec_l2 (northd.c:3654): outport == "ap" && eth.dst == {fa:16:3e:a9:4c:c7}, priority 50, uuid b874ece8

Lines checked: 517, Warnings: 67, Errors: 0


Please check this out.  If you feel there has been an error, please email aconole@redhat.com

Thanks,
0-day Robot
Mark Gray Aug. 27, 2021, 6:29 a.m. UTC | #2
On 26/08/2021 21:51, 0-day Robot wrote:
> Bleep bloop.  Greetings Mark Gray, I am a robot and I have tried out your patch.
> Thanks for your contribution.
> 
> I encountered some error that I wasn't expecting.  See the details below.
> 

These line length errors were already present in the file. I didn't fix
them because they were unrelated to this change.

I'm happy to fix them but maybe in a follow-up patch?
Aaron Conole Aug. 27, 2021, 5:12 p.m. UTC | #3
Mark Gray <mark.d.gray@redhat.com> writes:

> On 26/08/2021 21:51, 0-day Robot wrote:
>> Bleep bloop.  Greetings Mark Gray, I am a robot and I have tried out your patch.
>> Thanks for your contribution.
>> 
>> I encountered some error that I wasn't expecting.  See the details below.
>> 
>
> These line length errors were already present in the file. I didn't fix
> them because they were unrelated to this change.
>
> I'm happy to fix them but maybe in a follow-up patch?

Probably best.
diff mbox series

Patch

diff --git a/Documentation/tutorials/ovn-openstack.rst b/Documentation/tutorials/ovn-openstack.rst
index 3ab4a240c0f3..557d6284f710 100644
--- a/Documentation/tutorials/ovn-openstack.rst
+++ b/Documentation/tutorials/ovn-openstack.rst
@@ -777,7 +777,7 @@  address for ``a``.  Let's see what happens if we do::
   ...
   ingress(dp="n1", inport="ap")
   -----------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
       next;
   13. ls_in_l2_lkup: no match (implicit drop)
 
@@ -790,15 +790,15 @@  destination for ``b``::
   ...
   ingress(dp="n1", inport="ap")
   -----------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3529): eth.dst == fa:16:3e:99:7a:17, priority 50, uuid 57a4c46f
+  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:99:7a:17, priority 50, uuid 57a4c46f
       outport = "bp";
       output;
 
   egress(dp="n1", inport="ap", outport="bp")
   ------------------------------------------
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "bp" && eth.dst == {fa:16:3e:99:7a:17}, priority 50, uuid 8aa6426d
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "bp" && eth.dst == {fa:16:3e:99:7a:17}, priority 50, uuid 8aa6426d
       output;
       /* output to "bp", type "" */
 
@@ -1214,29 +1214,29 @@  as the output port::
   ...
   ingress(dp="n1", inport="ap")
   -----------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
       next;
-   1. ls_in_port_sec_ip (ovn-northd.c:2364): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == {10.1.1.5}, priority 90, uuid 343af48c
+   1. ls_in_port_sec_ip (northd.c:2364): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == {10.1.1.5}, priority 90, uuid 343af48c
       next;
-   3. ls_in_pre_acl (ovn-northd.c:2646): ip, priority 100, uuid 46c089e6
+   3. ls_in_pre_acl (northd.c:2646): ip, priority 100, uuid 46c089e6
       reg0[0] = 1;
       next;
-   5. ls_in_pre_stateful (ovn-northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634
+   5. ls_in_pre_stateful (northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634
       ct_next;
 
   ct_next(ct_state=est|trk /* default (use --ct to customize) */)
   ---------------------------------------------------------------
-   6. ls_in_acl (ovn-northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip4), priority 2002, uuid a12b39f0
+   6. ls_in_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip4), priority 2002, uuid a12b39f0
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3529): eth.dst == fa:16:3e:f6:e2:8f, priority 50, uuid c43ead31
+  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:f6:e2:8f, priority 50, uuid c43ead31
       outport = "17d870";
       output;
 
   egress(dp="n1", inport="ap", outport="17d870")
   ----------------------------------------------
-   1. ls_out_pre_acl (ovn-northd.c:2626): ip && outport == "17d870", priority 110, uuid 60395450
+   1. ls_out_pre_acl (northd.c:2626): ip && outport == "17d870", priority 110, uuid 60395450
       next;
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "17d870", priority 50, uuid 91b5cab0
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "17d870", priority 50, uuid 91b5cab0
       output;
       /* output to "17d870", type "patch" */
 
@@ -1250,9 +1250,9 @@  OVN "logical patch port"::
 
   ingress(dp="r", inport="lrp-17d870")
   ------------------------------------
-   0. lr_in_admission (ovn-northd.c:4071): eth.dst == fa:16:3e:f6:e2:8f && inport == "lrp-17d870", priority 50, uuid fa5270b0
+   0. lr_in_admission (northd.c:4071): eth.dst == fa:16:3e:f6:e2:8f && inport == "lrp-17d870", priority 50, uuid fa5270b0
       next;
-   5. lr_in_ip_routing (ovn-northd.c:3782): ip4.dst == 10.1.2.0/24, priority 49, uuid 5f9d469f
+   5. lr_in_ip_routing (northd.c:3782): ip4.dst == 10.1.2.0/24, priority 49, uuid 5f9d469f
       ip.ttl--;
       reg0 = ip4.dst;
       reg1 = 10.1.2.1;
@@ -1260,15 +1260,15 @@  OVN "logical patch port"::
       outport = "lrp-82b983";
       flags.loopback = 1;
       next;
-   6. lr_in_arp_resolve (ovn-northd.c:5088): outport == "lrp-82b983" && reg0 == 10.1.2.7, priority 100, uuid 03d506d3
+   6. lr_in_arp_resolve (northd.c:5088): outport == "lrp-82b983" && reg0 == 10.1.2.7, priority 100, uuid 03d506d3
       eth.dst = fa:16:3e:89:f2:36;
       next;
-   8. lr_in_arp_request (ovn-northd.c:5260): 1, priority 0, uuid 6dacdd82
+   8. lr_in_arp_request (northd.c:5260): 1, priority 0, uuid 6dacdd82
       output;
 
   egress(dp="r", inport="lrp-17d870", outport="lrp-82b983")
   ---------------------------------------------------------
-   3. lr_out_delivery (ovn-northd.c:5288): outport == "lrp-82b983", priority 100, uuid 00bea4f2
+   3. lr_out_delivery (northd.c:5288): outport == "lrp-82b983", priority 100, uuid 00bea4f2
       output;
       /* output to "lrp-82b983", type "patch" */
 
@@ -1277,29 +1277,29 @@  Finally the logical switch for ``n2`` runs through the same logic as
 
   ingress(dp="n2", inport="82b983")
   ---------------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "82b983", priority 50, uuid 9a789e06
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "82b983", priority 50, uuid 9a789e06
       next;
-   3. ls_in_pre_acl (ovn-northd.c:2624): ip && inport == "82b983", priority 110, uuid ab52f21a
+   3. ls_in_pre_acl (northd.c:2624): ip && inport == "82b983", priority 110, uuid ab52f21a
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3529): eth.dst == fa:16:3e:89:f2:36, priority 50, uuid dcafb3e9
+  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:89:f2:36, priority 50, uuid dcafb3e9
       outport = "cp";
       output;
 
   egress(dp="n2", inport="82b983", outport="cp")
   ----------------------------------------------
-   1. ls_out_pre_acl (ovn-northd.c:2648): ip, priority 100, uuid cd9cfa74
+   1. ls_out_pre_acl (northd.c:2648): ip, priority 100, uuid cd9cfa74
       reg0[0] = 1;
       next;
-   2. ls_out_pre_stateful (ovn-northd.c:2766): reg0[0] == 1, priority 100, uuid 9e8e22c5
+   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 9e8e22c5
       ct_next;
 
   ct_next(ct_state=est|trk /* default (use --ct to customize) */)
   ---------------------------------------------------------------
-   4. ls_out_acl (ovn-northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "cp" && ip4 && ip4.src == $as_ip4_0fc1b6cf_f925_49e6_8f00_6dd13beca9dc), priority 2002, uuid a746fa0d
+   4. ls_out_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "cp" && ip4 && ip4.src == $as_ip4_0fc1b6cf_f925_49e6_8f00_6dd13beca9dc), priority 2002, uuid a746fa0d
       next;
-   7. ls_out_port_sec_ip (ovn-northd.c:2364): outport == "cp" && eth.dst == fa:16:3e:89:f2:36 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.1.2.7}, priority 90, uuid 4d9862b5
+   7. ls_out_port_sec_ip (northd.c:2364): outport == "cp" && eth.dst == fa:16:3e:89:f2:36 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.1.2.7}, priority 90, uuid 4d9862b5
       next;
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "cp" && eth.dst == {fa:16:3e:89:f2:36}, priority 50, uuid 0242cdc3
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "cp" && eth.dst == {fa:16:3e:89:f2:36}, priority 50, uuid 0242cdc3
       output;
       /* output to "cp", type "" */
 
@@ -1442,17 +1442,17 @@  The first two stanzas just show the packet traveling through the
   ...
   ingress(dp="public", inport="provnet-d1ac28")
   ---------------------------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "provnet-d1ac28", priority 50, uuid 8d86fb06
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "provnet-d1ac28", priority 50, uuid 8d86fb06
       next;
-  10. ls_in_arp_rsp (ovn-northd.c:3266): inport == "provnet-d1ac28", priority 100, uuid 21313eff
+  10. ls_in_arp_rsp (northd.c:3266): inport == "provnet-d1ac28", priority 100, uuid 21313eff
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3571): eth.dst == fa:16:3e:b2:d2:67 && is_chassis_resident("cr-lrp-ae9b52"), priority 50, uuid 7f28f51f
+  13. ls_in_l2_lkup (northd.c:3571): eth.dst == fa:16:3e:b2:d2:67 && is_chassis_resident("cr-lrp-ae9b52"), priority 50, uuid 7f28f51f
       outport = "ae9b52";
       output;
 
   egress(dp="public", inport="provnet-d1ac28", outport="ae9b52")
   --------------------------------------------------------------
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "ae9b52", priority 50, uuid 72fea396
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "ae9b52", priority 50, uuid 72fea396
       output;
       /* output to "ae9b52", type "patch" */
 
@@ -1464,14 +1464,14 @@  IP::
 
   ingress(dp="router1", inport="lrp-ae9b52")
   ------------------------------------------
-   0. lr_in_admission (ovn-northd.c:4071): eth.dst == fa:16:3e:b2:d2:67 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 50, uuid 8c6945c2
+   0. lr_in_admission (northd.c:4071): eth.dst == fa:16:3e:b2:d2:67 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 50, uuid 8c6945c2
       next;
-   3. lr_in_unsnat (ovn-northd.c:4591): ip && ip4.dst == 172.24.4.8 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 100, uuid e922f541
+   3. lr_in_unsnat (northd.c:4591): ip && ip4.dst == 172.24.4.8 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 100, uuid e922f541
       ct_snat;
 
   ct_snat /* assuming no un-snat entry, so no change */
   -----------------------------------------------------
-   4. lr_in_dnat (ovn-northd.c:4649): ip && ip4.dst == 172.24.4.8 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 100, uuid 02f41b79
+   4. lr_in_dnat (northd.c:4649): ip && ip4.dst == 172.24.4.8 && inport == "lrp-ae9b52" && is_chassis_resident("cr-lrp-ae9b52"), priority 100, uuid 02f41b79
       ct_dnat(10.0.0.6);
 
 Still in "router1", the routing and output steps transmit the packet
@@ -1479,7 +1479,7 @@  to the "private" network::
 
   ct_dnat(ip4.dst=10.0.0.6)
   -------------------------
-   5. lr_in_ip_routing (ovn-northd.c:3782): ip4.dst == 10.0.0.0/26, priority 53, uuid 86e005b0
+   5. lr_in_ip_routing (northd.c:3782): ip4.dst == 10.0.0.0/26, priority 53, uuid 86e005b0
       ip.ttl--;
       reg0 = ip4.dst;
       reg1 = 10.0.0.1;
@@ -1487,15 +1487,15 @@  to the "private" network::
       outport = "lrp-f264e7";
       flags.loopback = 1;
       next;
-   6. lr_in_arp_resolve (ovn-northd.c:5088): outport == "lrp-f264e7" && reg0 == 10.0.0.6, priority 100, uuid 2963d67c
+   6. lr_in_arp_resolve (northd.c:5088): outport == "lrp-f264e7" && reg0 == 10.0.0.6, priority 100, uuid 2963d67c
       eth.dst = fa:16:3e:c1:f5:a2;
       next;
-   8. lr_in_arp_request (ovn-northd.c:5260): 1, priority 0, uuid eea419b7
+   8. lr_in_arp_request (northd.c:5260): 1, priority 0, uuid eea419b7
       output;
 
   egress(dp="router1", inport="lrp-ae9b52", outport="lrp-f264e7")
   ---------------------------------------------------------------
-   3. lr_out_delivery (ovn-northd.c:5288): outport == "lrp-f264e7", priority 100, uuid 42dadc23
+   3. lr_out_delivery (northd.c:5288): outport == "lrp-f264e7", priority 100, uuid 42dadc23
       output;
       /* output to "lrp-f264e7", type "patch" */
 
@@ -1504,29 +1504,29 @@  firewall and is output to ``d``::
 
   ingress(dp="private", inport="f264e7")
   --------------------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "f264e7", priority 50, uuid 5b721214
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "f264e7", priority 50, uuid 5b721214
       next;
-   3. ls_in_pre_acl (ovn-northd.c:2624): ip && inport == "f264e7", priority 110, uuid 5bdc3209
+   3. ls_in_pre_acl (northd.c:2624): ip && inport == "f264e7", priority 110, uuid 5bdc3209
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3529): eth.dst == fa:16:3e:c1:f5:a2, priority 50, uuid 7957f80f
+  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:c1:f5:a2, priority 50, uuid 7957f80f
       outport = "dp";
       output;
 
   egress(dp="private", inport="f264e7", outport="dp")
   ---------------------------------------------------
-   1. ls_out_pre_acl (ovn-northd.c:2648): ip, priority 100, uuid 4981c79d
+   1. ls_out_pre_acl (northd.c:2648): ip, priority 100, uuid 4981c79d
       reg0[0] = 1;
       next;
-   2. ls_out_pre_stateful (ovn-northd.c:2766): reg0[0] == 1, priority 100, uuid 247e02eb
+   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 247e02eb
       ct_next;
 
   ct_next(ct_state=est|trk /* default (use --ct to customize) */)
   ---------------------------------------------------------------
-   4. ls_out_acl (ovn-northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "dp" && ip4 && ip4.src == 0.0.0.0/0 && icmp4), priority 2002, uuid b860fc9f
+   4. ls_out_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "dp" && ip4 && ip4.src == 0.0.0.0/0 && icmp4), priority 2002, uuid b860fc9f
       next;
-   7. ls_out_port_sec_ip (ovn-northd.c:2364): outport == "dp" && eth.dst == fa:16:3e:c1:f5:a2 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.0.0.6}, priority 90, uuid 15655a98
+   7. ls_out_port_sec_ip (northd.c:2364): outport == "dp" && eth.dst == fa:16:3e:c1:f5:a2 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.0.0.6}, priority 90, uuid 15655a98
       next;
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "dp" && eth.dst == {fa:16:3e:c1:f5:a2}, priority 50, uuid 5916f94b
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "dp" && eth.dst == {fa:16:3e:c1:f5:a2}, priority 50, uuid 5916f94b
       output;
       /* output to "dp", type "" */
 
@@ -1622,37 +1622,37 @@  closely to those for IPv4 which we already discussed back under
   ...
   ingress(dp="n1", inport="ap")
   -----------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
       next;
-   1. ls_in_port_sec_ip (ovn-northd.c:2390): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip6.src == {fe80::f816:3eff:fea9:4cc7, fc11::5}, priority 90, uuid 604810ea
+   1. ls_in_port_sec_ip (northd.c:2390): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip6.src == {fe80::f816:3eff:fea9:4cc7, fc11::5}, priority 90, uuid 604810ea
       next;
-   3. ls_in_pre_acl (ovn-northd.c:2646): ip, priority 100, uuid 46c089e6
+   3. ls_in_pre_acl (northd.c:2646): ip, priority 100, uuid 46c089e6
       reg0[0] = 1;
       next;
-   5. ls_in_pre_stateful (ovn-northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634
+   5. ls_in_pre_stateful (northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634
       ct_next;
 
   ct_next(ct_state=est|trk /* default (use --ct to customize) */)
   ---------------------------------------------------------------
-   6. ls_in_acl (ovn-northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip6), priority 2002, uuid 7fdd607e
+   6. ls_in_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip6), priority 2002, uuid 7fdd607e
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3529): eth.dst == fa:16:3e:ef:2f:8b, priority 50, uuid e1d87fc5
+  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:ef:2f:8b, priority 50, uuid e1d87fc5
       outport = "ad952e";
       output;
 
   egress(dp="n1", inport="ap", outport="ad952e")
   ----------------------------------------------
-   1. ls_out_pre_acl (ovn-northd.c:2626): ip && outport == "ad952e", priority 110, uuid 88f68988
+   1. ls_out_pre_acl (northd.c:2626): ip && outport == "ad952e", priority 110, uuid 88f68988
       next;
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "ad952e", priority 50, uuid 5935755e
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "ad952e", priority 50, uuid 5935755e
       output;
       /* output to "ad952e", type "patch" */
 
   ingress(dp="r", inport="lrp-ad952e")
   ------------------------------------
-   0. lr_in_admission (ovn-northd.c:4071): eth.dst == fa:16:3e:ef:2f:8b && inport == "lrp-ad952e", priority 50, uuid ddfeb712
+   0. lr_in_admission (northd.c:4071): eth.dst == fa:16:3e:ef:2f:8b && inport == "lrp-ad952e", priority 50, uuid ddfeb712
       next;
-   5. lr_in_ip_routing (ovn-northd.c:3782): ip6.dst == fc22::/64, priority 129, uuid cc2130ec
+   5. lr_in_ip_routing (northd.c:3782): ip6.dst == fc22::/64, priority 129, uuid cc2130ec
       ip.ttl--;
       xxreg0 = ip6.dst;
       xxreg1 = fc22::1;
@@ -1660,43 +1660,43 @@  closely to those for IPv4 which we already discussed back under
       outport = "lrp-1a8162";
       flags.loopback = 1;
       next;
-   6. lr_in_arp_resolve (ovn-northd.c:5122): outport == "lrp-1a8162" && xxreg0 == fc22::7, priority 100, uuid bcf75288
+   6. lr_in_arp_resolve (northd.c:5122): outport == "lrp-1a8162" && xxreg0 == fc22::7, priority 100, uuid bcf75288
       eth.dst = fa:16:3e:89:f2:36;
       next;
-   8. lr_in_arp_request (ovn-northd.c:5260): 1, priority 0, uuid 6dacdd82
+   8. lr_in_arp_request (northd.c:5260): 1, priority 0, uuid 6dacdd82
       output;
 
   egress(dp="r", inport="lrp-ad952e", outport="lrp-1a8162")
   ---------------------------------------------------------
-   3. lr_out_delivery (ovn-northd.c:5288): outport == "lrp-1a8162", priority 100, uuid 5260dfc5
+   3. lr_out_delivery (northd.c:5288): outport == "lrp-1a8162", priority 100, uuid 5260dfc5
       output;
       /* output to "lrp-1a8162", type "patch" */
 
   ingress(dp="n2", inport="1a8162")
   ---------------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "1a8162", priority 50, uuid 10957d1b
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "1a8162", priority 50, uuid 10957d1b
       next;
-   3. ls_in_pre_acl (ovn-northd.c:2624): ip && inport == "1a8162", priority 110, uuid a27ebd00
+   3. ls_in_pre_acl (northd.c:2624): ip && inport == "1a8162", priority 110, uuid a27ebd00
       next;
-  13. ls_in_l2_lkup (ovn-northd.c:3529): eth.dst == fa:16:3e:89:f2:36, priority 50, uuid dcafb3e9
+  13. ls_in_l2_lkup (northd.c:3529): eth.dst == fa:16:3e:89:f2:36, priority 50, uuid dcafb3e9
       outport = "cp";
       output;
 
   egress(dp="n2", inport="1a8162", outport="cp")
   ----------------------------------------------
-   1. ls_out_pre_acl (ovn-northd.c:2648): ip, priority 100, uuid cd9cfa74
+   1. ls_out_pre_acl (northd.c:2648): ip, priority 100, uuid cd9cfa74
       reg0[0] = 1;
       next;
-   2. ls_out_pre_stateful (ovn-northd.c:2766): reg0[0] == 1, priority 100, uuid 9e8e22c5
+   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 9e8e22c5
       ct_next;
 
   ct_next(ct_state=est|trk /* default (use --ct to customize) */)
   ---------------------------------------------------------------
-   4. ls_out_acl (ovn-northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "cp" && ip6 && ip6.src == $as_ip6_0fc1b6cf_f925_49e6_8f00_6dd13beca9dc), priority 2002, uuid 12fc96f9
+   4. ls_out_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (outport == "cp" && ip6 && ip6.src == $as_ip6_0fc1b6cf_f925_49e6_8f00_6dd13beca9dc), priority 2002, uuid 12fc96f9
       next;
-   7. ls_out_port_sec_ip (ovn-northd.c:2390): outport == "cp" && eth.dst == fa:16:3e:89:f2:36 && ip6.dst == {fe80::f816:3eff:fe89:f236, ff00::/8, fc22::7}, priority 90, uuid c622596a
+   7. ls_out_port_sec_ip (northd.c:2390): outport == "cp" && eth.dst == fa:16:3e:89:f2:36 && ip6.dst == {fe80::f816:3eff:fe89:f236, ff00::/8, fc22::7}, priority 90, uuid c622596a
       next;
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "cp" && eth.dst == {fa:16:3e:89:f2:36}, priority 50, uuid 0242cdc3
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "cp" && eth.dst == {fa:16:3e:89:f2:36}, priority 50, uuid 0242cdc3
       output;
       /* output to "cp", type "" */
 
@@ -1882,14 +1882,14 @@  just the usual travel through the firewall::
   ...
   ingress(dp="n1", inport="ap")
   -----------------------------
-   0. ls_in_port_sec_l2 (ovn-northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
+   0. ls_in_port_sec_l2 (northd.c:3234): inport == "ap" && eth.src == {fa:16:3e:a9:4c:c7}, priority 50, uuid 6dcc418a
       next;
-   1. ls_in_port_sec_ip (ovn-northd.c:2325): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == 0.0.0.0 && ip4.dst == 255.255.255.255 && udp.src == 68 && udp.dst == 67, priority 90, uuid e46bed6f
+   1. ls_in_port_sec_ip (northd.c:2325): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == 0.0.0.0 && ip4.dst == 255.255.255.255 && udp.src == 68 && udp.dst == 67, priority 90, uuid e46bed6f
       next;
-   3. ls_in_pre_acl (ovn-northd.c:2646): ip, priority 100, uuid 46c089e6
+   3. ls_in_pre_acl (northd.c:2646): ip, priority 100, uuid 46c089e6
       reg0[0] = 1;
       next;
-   5. ls_in_pre_stateful (ovn-northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634
+   5. ls_in_pre_stateful (northd.c:2764): reg0[0] == 1, priority 100, uuid d1941634
       ct_next;
 
 The next part is the new part.  First, an ACL in table 6 allows a DHCP
@@ -1898,13 +1898,13 @@  action replaces a DHCPDISCOVER or DHCPREQUEST packet by a
 reply.  Table 12 flips the packet's source and destination and sends
 it back the way it came in::
 
-   6. ls_in_acl (ovn-northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip4 && ip4.dst == {255.255.255.255, 10.1.1.0/24} && udp && udp.src == 68 && udp.dst == 67), priority 2002, uuid 9c90245d
+   6. ls_in_acl (northd.c:2925): !ct.new && ct.est && !ct.rpl && ct_label.blocked == 0 && (inport == "ap" && ip4 && ip4.dst == {255.255.255.255, 10.1.1.0/24} && udp && udp.src == 68 && udp.dst == 67), priority 2002, uuid 9c90245d
       next;
-  11. ls_in_dhcp_options (ovn-northd.c:3409): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == 0.0.0.0 && ip4.dst == 255.255.255.255 && udp.src == 68 && udp.dst == 67, priority 100, uuid 8d63f29c
+  11. ls_in_dhcp_options (northd.c:3409): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4.src == 0.0.0.0 && ip4.dst == 255.255.255.255 && udp.src == 68 && udp.dst == 67, priority 100, uuid 8d63f29c
       reg0[3] = put_dhcp_opts(offerip = 10.1.1.5, lease_time = 43200, mtu = 1442, netmask = 255.255.255.0, router = 10.1.1.1, server_id = 10.1.1.1);
       /* We assume that this packet is DHCPDISCOVER or DHCPREQUEST. */
       next;
-  12. ls_in_dhcp_response (ovn-northd.c:3438): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4 && udp.src == 68 && udp.dst == 67 && reg0[3], priority 100, uuid 995eeaa9
+  12. ls_in_dhcp_response (northd.c:3438): inport == "ap" && eth.src == fa:16:3e:a9:4c:c7 && ip4 && udp.src == 68 && udp.dst == 67 && reg0[3], priority 100, uuid 995eeaa9
       eth.dst = eth.src;
       eth.src = fa:16:3e:bb:94:72;
       ip4.dst = 10.1.1.5;
@@ -1920,20 +1920,20 @@  Then the last part is just traveling back through the firewall to VM
 
   egress(dp="n1", inport="ap", outport="ap")
   ------------------------------------------
-   1. ls_out_pre_acl (ovn-northd.c:2648): ip, priority 100, uuid 3752b746
+   1. ls_out_pre_acl (northd.c:2648): ip, priority 100, uuid 3752b746
       reg0[0] = 1;
       next;
-   2. ls_out_pre_stateful (ovn-northd.c:2766): reg0[0] == 1, priority 100, uuid 0c066ea1
+   2. ls_out_pre_stateful (northd.c:2766): reg0[0] == 1, priority 100, uuid 0c066ea1
       ct_next;
 
   ct_next(ct_state=est|trk /* default (use --ct to customize) */)
   ---------------------------------------------------------------
-   4. ls_out_acl (ovn-northd.c:3008): outport == "ap" && eth.src == fa:16:3e:bb:94:72 && ip4.src == 10.1.1.1 && udp && udp.src == 67 && udp.dst == 68, priority 34000, uuid 0b383e77
+   4. ls_out_acl (northd.c:3008): outport == "ap" && eth.src == fa:16:3e:bb:94:72 && ip4.src == 10.1.1.1 && udp && udp.src == 67 && udp.dst == 68, priority 34000, uuid 0b383e77
       ct_commit;
       next;
-   7. ls_out_port_sec_ip (ovn-northd.c:2364): outport == "ap" && eth.dst == fa:16:3e:a9:4c:c7 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.1.1.5}, priority 90, uuid 7b8cbcd5
+   7. ls_out_port_sec_ip (northd.c:2364): outport == "ap" && eth.dst == fa:16:3e:a9:4c:c7 && ip4.dst == {255.255.255.255, 224.0.0.0/4, 10.1.1.5}, priority 90, uuid 7b8cbcd5
       next;
-   8. ls_out_port_sec_l2 (ovn-northd.c:3654): outport == "ap" && eth.dst == {fa:16:3e:a9:4c:c7}, priority 50, uuid b874ece8
+   8. ls_out_port_sec_l2 (northd.c:3654): outport == "ap" && eth.dst == {fa:16:3e:a9:4c:c7}, priority 50, uuid b874ece8
       output;
       /* output to "ap", type "" */
 
diff --git a/northd/automake.mk b/northd/automake.mk
index 6da54deb8ef4..306b533a486b 100644
--- a/northd/automake.mk
+++ b/northd/automake.mk
@@ -1,7 +1,7 @@ 
 # ovn-northd
 bin_PROGRAMS += northd/ovn-northd
 northd_ovn_northd_SOURCES = \
-	northd/ovn-northd.c \
+	northd/northd.c \
 	northd/ipam.c \
 	northd/ipam.h
 northd_ovn_northd_LDADD = \
diff --git a/northd/lrouter.dl b/northd/lrouter.dl
index 1835d4c78d3f..ad7ee73fffd5 100644
--- a/northd/lrouter.dl
+++ b/northd/lrouter.dl
@@ -368,7 +368,7 @@  function snat_for_lb(lr_options: Map<string, string>, lb: Intern<nb::Load_Balanc
  *   - lb_force_snat_addrs
  *   - IP addresses used in the router's attached NAT rules
  *
- * This is like init_nat_entries() in ovn-northd.c. */
+ * This is like init_nat_entries() in northd.c. */
 relation LogicalRouterSnatIP(lr: uuid, snat_ip: v46_ip, nat: Option<NAT>)
 LogicalRouterSnatIP(lr._uuid, force_snat_ip, None) :-
     lr in nb::Logical_Router(),
diff --git a/northd/ovn-northd.c b/northd/northd.c
similarity index 99%
rename from northd/ovn-northd.c
rename to northd/northd.c
index af413aba4608..58fcc2510b9e 100644
--- a/northd/ovn-northd.c
+++ b/northd/northd.c
@@ -13235,8 +13235,8 @@  build_lflows(struct northd_context *ctx, struct hmap *datapaths,
         sbrec_logical_flow_set_controller_meter(sbflow, lflow->ctrl_meter);
 
         /* Trim the source locator lflow->where, which looks something like
-         * "ovn/northd/ovn-northd.c:1234", down to just the part following the
-         * last slash, e.g. "ovn-northd.c:1234". */
+         * "ovn/northd/northd.c:1234", down to just the part following the
+         * last slash, e.g. "northd.c:1234". */
         const char *slash = strrchr(lflow->where, '/');
 #if _WIN32
         const char *backslash = strrchr(lflow->where, '\\');
diff --git a/northd/ovn.rs b/northd/ovn.rs
index 5f0939409c96..746884071e70 100644
--- a/northd/ovn.rs
+++ b/northd/ovn.rs
@@ -614,7 +614,7 @@  impl lport_addresses_c {
     }
 }
 
-/* functions imported from ovn-northd.c */
+/* functions imported from northd.c */
 extern "C" {
     fn ddlog_warn(msg: *const raw::c_char);
     fn ddlog_err(msg: *const raw::c_char);
diff --git a/northd/ovn_northd.dl b/northd/ovn_northd.dl
index dcfa1fb5d932..91ed34e0ab7c 100644
--- a/northd/ovn_northd.dl
+++ b/northd/ovn_northd.dl
@@ -3974,7 +3974,7 @@  function json_string_escape_vec(names: Vec<string>): string
  * to external ports because only one chassis should send such a reply.
  *
  * Returns a prefix and a suffix string.  There is no reason for this except
- * that it makes it possible to exactly mimic the format used by ovn-northd.c
+ * that it makes it possible to exactly mimic the format used by northd.c
  * so that text-based comparisons do not show differences.  (This fails if
  * there's more than one localnet port since the C version uses multiple flows
  * in that case.)
diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
index 5f39a57163d0..55424e296db4 100644
--- a/tests/ovn-northd.at
+++ b/tests/ovn-northd.at
@@ -4057,7 +4057,7 @@  AT_CHECK([grep -w "ls_in_dhcp_options" sw0flows | sort], [0], [dnl
 AT_CLEANUP
 ])
 
-# XXX This test currently only runs for ovn-northd.c. The test fails
+# XXX This test currently only runs for northd.c. The test fails
 # with ovn-northd-ddlog because of the section where 2 HA_Chassis_Groups
 # are used by 2 routers. For some reason, this causes ovn-northd-ddlog
 # to stop processing new changes to the northbound database and to