diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile
index 054a03c..93dad8e 100644
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@@ -14,7 +14,7 @@ BOARDNAME:=Microchip (Atmel AT91)
 FEATURES:=ext4 squashfs targz usb usbgadget ubifs
 SUBTARGETS:=sama5d2 sama5d3 sama5d4 sam9x
 
-KERNEL_PATCHVER:=4.9
+KERNEL_PATCHVER:=4.14
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/at91/config-4.9 b/target/linux/at91/config-4.14
similarity index 70%
rename from target/linux/at91/config-4.9
rename to target/linux/at91/config-4.14
index 926681f..62ba196 100644
--- a/target/linux/at91/config-4.9
+++ b/target/linux/at91/config-4.14
@@ -1,15 +1,25 @@
 CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
 CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
 CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
 CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
 CONFIG_ARCH_MULTIPLATFORM=y
 # CONFIG_ARCH_MULTI_CPU_AUTO is not set
+# CONFIG_ARCH_MULTI_V4 is not set
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
 CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
@@ -23,44 +33,41 @@ CONFIG_ARM=y
 CONFIG_ARM_AT91_CPUIDLE=y
 CONFIG_ARM_CPU_SUSPEND=y
 CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_PATCH_PHYS_VIRT=y
 CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
+# CONFIG_AT91RM9200_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_AT91_ADC=y
-CONFIG_ATMEL_AIC5_IRQ=y
+CONFIG_AT91_SOC_ID=y
+CONFIG_ATMEL_AIC_IRQ=y
 CONFIG_ATMEL_EBI=y
 CONFIG_ATMEL_PIT=y
+CONFIG_ATMEL_PM=y
 CONFIG_ATMEL_SDRAMC=y
 CONFIG_ATMEL_SSC=y
+CONFIG_ATMEL_ST=y
 CONFIG_ATMEL_TCB_CLKSRC=y
 CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_TCLIB=y
 CONFIG_AT_HDMAC=y
-# CONFIG_AT_XDMAC is not set
+CONFIG_AT_XDMAC=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_PWM=y
-# CONFIG_BLK_CGROUP is not set
+# CONFIG_BATTERY_ACT8945A is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
 # CONFIG_BPF_SYSCALL is not set
 # CONFIG_BRIDGE is not set
-CONFIG_CACHE_L2X0=y
+# CONFIG_CACHE_L2X0 is not set
 CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_AREAS=7
@@ -73,34 +80,49 @@ CONFIG_COMPAT_BRK=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_COREDUMP=y
-# CONFIG_CPUSETS is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_NO_EFFICIENT_FFS=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRASH_CORE=y
 CONFIG_CRC16=y
 # CONFIG_CRC32_SARWATE is not set
 CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC7=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AKCIPHER2=y
 CONFIG_CRYPTO_CCM=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
+# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DRBG=y
 CONFIG_CRYPTO_DRBG_HMAC=y
 CONFIG_CRYPTO_DRBG_MENU=y
@@ -110,7 +132,9 @@ CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_KPP2=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
@@ -122,12 +146,14 @@ CONFIG_CRYPTO_RNG_DEFAULT=y
 CONFIG_CRYPTO_SEQIV=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_ALIGN_RODATA=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_UART_8250 is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_DEFAULT_NOOP=y
+CONFIG_DEVKMEM=y
+CONFIG_DEVMEM=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMADEVICES=y
@@ -140,13 +166,16 @@ CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_BRIDGE=y
 CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
 CONFIG_DRM_GEM_CMA_HELPER=y
 CONFIG_DRM_KMS_CMA_HELPER=y
 CONFIG_DRM_KMS_FB_HELPER=y
 CONFIG_DRM_KMS_HELPER=y
 CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+# CONFIG_DRM_PANEL_LVDS is not set
 CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DST_CACHE=y
+# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
 CONFIG_DTC=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_EDAC_ATOMIC_SCRUB=y
@@ -154,7 +183,6 @@ CONFIG_EDAC_SUPPORT=y
 CONFIG_EEPROM_AT24=y
 CONFIG_ELF_CORE=y
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXPORTFS=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_FAT_FS=y
@@ -165,6 +193,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_CMDLINE=y
 CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
 CONFIG_FB_SYS_COPYAREA=y
 CONFIG_FB_SYS_FILLRECT=y
 CONFIG_FB_SYS_FOPS=y
@@ -179,8 +208,10 @@ CONFIG_FREEZER=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
 CONFIG_GENERIC_EARLY_IOREMAP=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
 CONFIG_GENERIC_IO=y
@@ -193,10 +224,11 @@ CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GRACE_PERIOD=y
+# CONFIG_GRO_CELLS is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
@@ -204,20 +236,16 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT_MAP=y
 # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
 CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
 CONFIG_HAVE_ARCH_JUMP_LABEL=y
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_HAVE_ARCH_PFN_VALID=y
 CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_AT91_GENERATED_CLK=y
-CONFIG_HAVE_AT91_H32MX=y
 CONFIG_HAVE_AT91_SMD=y
 CONFIG_HAVE_AT91_USB_CLK=y
 CONFIG_HAVE_AT91_UTMI=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
 CONFIG_HAVE_CC_STACKPROTECTOR=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_CLK_PREPARE=y
@@ -227,7 +255,8 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
 CONFIG_HAVE_DMA_CONTIGUOUS=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
 CONFIG_HAVE_FB_ATMEL=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -244,7 +273,6 @@ CONFIG_HAVE_PERF_REGS=y
 CONFIG_HAVE_PERF_USER_STACK_DUMP=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
@@ -254,7 +282,9 @@ CONFIG_HID_GENERIC=y
 CONFIG_HW_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_ATMEL=y
-CONFIG_HZ_FIXED=0
+CONFIG_HZ=128
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_FIXED=128
 CONFIG_HZ_PERIODIC=y
 CONFIG_I2C=y
 CONFIG_I2C_ALGOBIT=y
@@ -272,8 +302,10 @@ CONFIG_IIO_TRIGGERED_BUFFER=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_IOMMU_HELPER=y
 # CONFIG_IOSCHED_DEADLINE is not set
@@ -286,6 +318,15 @@ CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_MCE_KBD_DECODER=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_SANYO_DECODER=y
+CONFIG_IR_SHARP_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_XMP_DECODER=y
 CONFIG_JBD2=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_KERNEL_GZIP=y
@@ -294,6 +335,7 @@ CONFIG_KEXEC=y
 CONFIG_KEXEC_CORE=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_QT1070=y
+CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
@@ -304,31 +346,39 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_LIBFDT=y
+# CONFIG_LIRC is not set
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCKD=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_LZO_COMPRESS=y
 CONFIG_LZO_DECOMPRESS=y
 CONFIG_MACB=y
+CONFIG_MACB_USE_HWSTAMP=y
 CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
-# CONFIG_MEMCG is not set
 CONFIG_MEMORY=y
 CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_ACT8945A=y
+CONFIG_MFD_AT91_USART=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_ATMEL_HLCDC=y
+CONFIG_MFD_ATMEL_SMC=y
 CONFIG_MFD_CORE=y
 CONFIG_MFD_SYSCON=y
 CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MIGHT_HAVE_PCI=y
 CONFIG_MIGRATION=y
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_AT91=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
 CONFIG_MODULES_USE_ELF_REL=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
@@ -338,6 +388,8 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 # CONFIG_MTD_UBI_BLOCK is not set
@@ -346,8 +398,9 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
 CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEON=y
+CONFIG_NET_PTP_CLASSIFY=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
@@ -366,8 +419,6 @@ CONFIG_OF_NET=y
 CONFIG_OF_RESERVED_MEM=y
 CONFIG_OLD_SIGACTION=y
 CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
 CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PANIC_ON_OOPS is not set
 CONFIG_PANIC_ON_OOPS_VALUE=0
@@ -382,10 +433,6 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_PINCTRL_AT91PIO4=y
 # CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
 CONFIG_PM=y
 CONFIG_PM_ADVANCED_DEBUG=y
 CONFIG_PM_CLK=y
@@ -398,8 +445,10 @@ CONFIG_POWER_RESET_AT91_POWEROFF=y
 CONFIG_POWER_RESET_AT91_RESET=y
 # CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
 CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_PWM_ATMEL_HLCDC_PWM=y
@@ -407,14 +456,20 @@ CONFIG_PWM_ATMEL_TCB=y
 CONFIG_PWM_SYSFS=y
 CONFIG_RATIONAL=y
 # CONFIG_RCU_EXPERT is not set
+# CONFIG_RCU_NEED_SEGCBLIST is not set
 # CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RC_CORE=y
+CONFIG_RC_DECODERS=y
+# CONFIG_RC_DEVICES is not set
+CONFIG_RC_MAP=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_I2C=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_REGMAP_SPI=y
 CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_ACT8945A is not set
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_ROOT_NFS=y
+CONFIG_RFKILL_LEDS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_AT91SAM9 is not set
@@ -437,16 +492,19 @@ CONFIG_SLAB=y
 CONFIG_SND=y
 CONFIG_SND_ARM=y
 # CONFIG_SND_AT73C213 is not set
-# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
-# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
+CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
+CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
 CONFIG_SND_ATMEL_SOC=y
-# CONFIG_SND_ATMEL_SOC_CLASSD is not set
+CONFIG_SND_ATMEL_SOC_CLASSD=y
 CONFIG_SND_ATMEL_SOC_DMA=y
-# CONFIG_SND_ATMEL_SOC_PDMIC is not set
+CONFIG_SND_ATMEL_SOC_I2S=y
+CONFIG_SND_ATMEL_SOC_PDC=y
+CONFIG_SND_ATMEL_SOC_PDMIC=y
 CONFIG_SND_ATMEL_SOC_SSC=y
 CONFIG_SND_ATMEL_SOC_SSC_DMA=y
+CONFIG_SND_ATMEL_SOC_SSC_PDC=y
+# CONFIG_SND_ATMEL_SOC_TSE850_PCM5142 is not set
 CONFIG_SND_ATMEL_SOC_WM8904=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
 CONFIG_SND_DMAENGINE_PCM=y
 CONFIG_SND_JACK=y
 CONFIG_SND_JACK_INPUT_DEV=y
@@ -455,40 +513,50 @@ CONFIG_SND_PCM_TIMER=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
 CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_MIKROE_PROTO is not set
+CONFIG_SND_SOC_WM8731=y
 CONFIG_SND_SOC_WM8904=y
 CONFIG_SND_SPI=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_TIMER=y
+CONFIG_SOC_AT91RM9200=y
+CONFIG_SOC_AT91SAM9=y
 CONFIG_SOC_BUS=y
-# CONFIG_SOC_SAMA5D2 is not set
-# CONFIG_SOC_SAMA5D3 is not set
-# CONFIG_SOC_SAMA5D4 is not set
+CONFIG_SOC_SAM_V4_V5=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_SPI=y
+# CONFIG_SPI_AT91_USART is not set
 CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
 CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_SQUASHFS is not set
 CONFIG_SRAM=y
+CONFIG_SRAM_EXEC=y
 CONFIG_SRCU=y
 # CONFIG_STAGING is not set
 # CONFIG_STANDALONE is not set
-CONFIG_SUNRPC=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_SWAP is not set
 CONFIG_SWIOTLB=y
 CONFIG_SWPHY=y
-# CONFIG_SWP_EMULATE is not set
+CONFIG_SYNC_FILE=y
 # CONFIG_SYN_COOKIES is not set
 CONFIG_SYSFS_SYSCALL=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
 # CONFIG_TMPFS_XATTR is not set
+# CONFIG_TOUCHSCREEN_ADC is not set
 CONFIG_TOUCHSCREEN_PROPERTIES=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 CONFIG_UBIFS_FS=y
@@ -501,30 +569,12 @@ CONFIG_USB=y
 CONFIG_USB_ACM=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 # CONFIG_USB_AT91 is not set
-# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ATMEL_USBA is not set
 CONFIG_USB_COMMON=y
-CONFIG_USB_CONFIGFS_ACM=y
-# CONFIG_USB_CONFIGFS_ECM is not set
-# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
-# CONFIG_USB_CONFIGFS_EEM is not set
-# CONFIG_USB_CONFIGFS_F_FS is not set
-# CONFIG_USB_CONFIGFS_F_HID is not set
-# CONFIG_USB_CONFIGFS_F_LB_SS is not set
-# CONFIG_USB_CONFIGFS_F_MIDI is not set
-# CONFIG_USB_CONFIGFS_F_PRINTER is not set
-# CONFIG_USB_CONFIGFS_F_UAC1 is not set
-# CONFIG_USB_CONFIGFS_F_UAC2 is not set
-# CONFIG_USB_CONFIGFS_F_UVC is not set
-CONFIG_USB_CONFIGFS_MASS_STORAGE=y
-# CONFIG_USB_CONFIGFS_NCM is not set
-# CONFIG_USB_CONFIGFS_OBEX is not set
-# CONFIG_USB_CONFIGFS_RNDIS is not set
-# CONFIG_USB_CONFIGFS_SERIAL is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_AT91=y
 # CONFIG_USB_EHCI_HCD_PLATFORM is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_HID=y
 CONFIG_USB_OHCI_HCD=y
@@ -538,15 +588,56 @@ CONFIG_USB_SERIAL_PL2303=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
+CONFIG_V4L2_FWNODE=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_VFAT_FS=y
 CONFIG_VFP=y
-CONFIG_VFPv3=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_MEMOPS=y
 CONFIG_VIDEOMODE_HELPERS=y
+# CONFIG_VIDEO_AD5820 is not set
+# CONFIG_VIDEO_AD9389B is not set
+# CONFIG_VIDEO_ADP1653 is not set
+# CONFIG_VIDEO_ADV748X is not set
+# CONFIG_VIDEO_ADV7511 is not set
+# CONFIG_VIDEO_ADV7604 is not set
+# CONFIG_VIDEO_ADV7842 is not set
+# CONFIG_VIDEO_AS3645A is not set
+CONFIG_VIDEO_ATMEL_ISC=y
+CONFIG_VIDEO_ATMEL_ISI=y
 # CONFIG_VIDEO_CPIA2 is not set
 CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_DW9714 is not set
+# CONFIG_VIDEO_ET8EK8 is not set
+# CONFIG_VIDEO_GS1662 is not set
+CONFIG_VIDEO_IR_I2C=y
+# CONFIG_VIDEO_LM3560 is not set
+# CONFIG_VIDEO_LM3646 is not set
+# CONFIG_VIDEO_M5MOLS is not set
+# CONFIG_VIDEO_MT9M032 is not set
+# CONFIG_VIDEO_MT9P031 is not set
+# CONFIG_VIDEO_MT9T001 is not set
+# CONFIG_VIDEO_MT9V032 is not set
+# CONFIG_VIDEO_MUX is not set
+# CONFIG_VIDEO_OV13858 is not set
+# CONFIG_VIDEO_OV5640 is not set
+# CONFIG_VIDEO_OV5645 is not set
+# CONFIG_VIDEO_OV5647 is not set
+# CONFIG_VIDEO_OV5670 is not set
+# CONFIG_VIDEO_OV7740 is not set
+# CONFIG_VIDEO_OV9650 is not set
+# CONFIG_VIDEO_S5C73M3 is not set
+# CONFIG_VIDEO_S5K4ECGX is not set
+# CONFIG_VIDEO_S5K5BAF is not set
+# CONFIG_VIDEO_S5K6A3 is not set
+# CONFIG_VIDEO_S5K6AA is not set
+# CONFIG_VIDEO_SMIAPP is not set
+# CONFIG_VIDEO_TC358743 is not set
 CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_VIDEO_XILINX is not set
 # CONFIG_VLAN_8021Q is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_VT=y
@@ -556,6 +647,13 @@ CONFIG_VT_CONSOLE_SLEEP=y
 CONFIG_WATCHDOG_CORE=y
 # CONFIG_WLAN is not set
 # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_X86=y
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZLIB_DEFLATE=y
diff --git a/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
similarity index 51%
rename from target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch
rename to target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
index 2a64fb8..80b010f 100644
--- a/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch
+++ b/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
@@ -1,10 +1,10 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -32,6 +32,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	usb_a9g20.dtb \
- 	usb_a9g20_lpw.dtb \
- 	at91sam9m10g45ek.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
 +	lmu5000.dtb \
- 	pm9g45.dtb \
- 	at91sam9n12ek.dtb \
- 	at91sam9rlek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
diff --git a/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch
new file mode 100644
index 0000000..f780d7d
--- /dev/null
+++ b/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+	at91-ariettag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91-kizboxmini.dtb \
++	at91-q5xr5.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
diff --git a/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch b/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
similarity index 63%
rename from target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch
rename to target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
index aeb523a..f51c3b8 100644
--- a/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch
+++ b/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
@@ -1,12 +1,12 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -45,7 +45,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	at91sam9g25ek.dtb \
- 	at91sam9g35ek.dtb \
- 	at91sam9x25ek.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
 -	at91sam9x35ek.dtb
 +	at91sam9x35ek.dtb \
 +	wb45n.dtb
  dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
- 	at91-sama5d2_xplained.dtb \
+	at91-kizbox2.dtb \
+	at91-sama5d2_xplained.dtb \
diff --git a/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch b/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
similarity index 69%
rename from target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch
rename to target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
index a30a803..a81b087 100644
--- a/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch
+++ b/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
@@ -1,12 +1,12 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -59,7 +59,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-sama5d4_ma5d4evk.dtb \
- 	at91-sama5d4_xplained.dtb \
- 	at91-sama5d4ek.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
+	at91-sama5d4_xplained.dtb \
+	at91-sama5d4ek.dtb \
 -	at91-vinco.dtb
 +	at91-vinco.dtb \
 +	wb50n.dtb
  dtb-$(CONFIG_ARCH_ATLAS6) += \
- 	atlas6-evb.dtb
+	atlas6-evb.dtb
  dtb-$(CONFIG_ARCH_ATLAS7) += \
diff --git a/target/linux/at91/patches-4.14/104-ARM-at91-build-dtb-for-sama5d2.patch b/target/linux/at91/patches-4.14/104-ARM-at91-build-dtb-for-sama5d2.patch
new file mode 100644
index 0000000..b0f3576
--- /dev/null
+++ b/target/linux/at91/patches-4.14/104-ARM-at91-build-dtb-for-sama5d2.patch
@@ -0,0 +1,1576 @@
+--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
++++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+@@ -36,6 +36,8 @@ Optional properties:
+ - GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
+ bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
+ input-debounce, output-low, output-high.
++- atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
++high drive. The default value is low drive.
+
+ Example:
+
+@@ -66,6 +68,7 @@ Example:
+			pinmux = <PIN_PB0>,
+				 <PIN_PB5>;
+			bias-pull-up;
++			atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+		};
+
+		pinctrl_sdmmc1_default: sdmmc1_default {
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -50,6 +50,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+	wb45n.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2.dtb \
++	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_xplained.dtb \
+--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
++++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+@@ -62,13 +62,52 @@
+
+	ahb {
+		apb {
++			qspi1: spi@f0024000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_qspi1_default>;
++
++				flash@0 {
++					#address-cells = <1>;
++					#size-cells = <1>;
++					compatible = "jedec,spi-nor";
++					reg = <0>;
++					spi-max-frequency = <80000000>;
++					m25p,fast-read;
++
++					at91bootstrap@00000000 {
++						label = "at91bootstrap";
++						reg = <0x00000000 0x00010000>;
++					};
++
++					bootloader@00010000 {
++						label = "bootloader";
++						reg = <0x00010000 0x000a0000>;
++					};
++
++					bootloaderenv@000b0000 {
++						label = "bootloader env";
++						reg = <0x000b0000 0x00010000>;
++					};
++
++					dtb@000c0000 {
++						label = "device tree";
++						reg = <0x000c0000 0x0020000>;
++					};
++
++					kernel@000e0000 {
++						label = "kernel";
++						reg = <0x000e0000 0x0400000>;
++					};
++				};
++			};
++
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				phy-mode = "rmii";
+
+-				ethernet-phy@0 {
+-					reg = <0x0>;
++				ethernet-phy@7 {
++					reg = <0x7>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+@@ -76,7 +115,41 @@
+				};
+			};
+
++			i2c0: i2c@f8028000 {
++				dmas = <0>, <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2c0_default>;
++				status = "okay";
++
++				at24@50 {
++					compatible = "24c02";
++					reg = <0x50>;
++					pagesize = <8>;
++				};
++			};
++
+			pinctrl@fc038000 {
++				pinctrl_i2c0_default: i2c0_default {
++					pinmux = <PIN_PD21__TWD0>,
++						 <PIN_PD22__TWCK0>;
++					bias-disable;
++				};
++
++				pinctrl_qspi1_default: qspi1_default {
++					sck_cs {
++						pinmux = <PIN_PB5__QSPI1_SCK>,
++							 <PIN_PB6__QSPI1_CS>;
++						bias-disable;
++					};
++
++					data {
++						pinmux = <PIN_PB7__QSPI1_IO0>,
++							 <PIN_PB8__QSPI1_IO1>,
++							 <PIN_PB9__QSPI1_IO2>,
++							 <PIN_PB10__QSPI1_IO3>;
++						bias-pull-up;
++					};
++				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
++++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+@@ -53,19 +53,27 @@
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
++	aliases {
++		serial0 = &uart1;	/* DBGU */
++		serial1 = &uart4;	/* mikro BUS 1 */
++		serial2 = &uart2;	/* mikro BUS 2 */
++		i2c1	= &i2c1;
++		i2c2	= &i2c2;
++	};
++
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+-		usb0: gadget@00300000 {
++		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+-		usb1: ohci@00400000 {
++		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+@@ -76,7 +84,7 @@
+			status = "okay";
+		};
+
+-		usb2: ehci@00500000 {
++		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+@@ -95,12 +103,35 @@
+		};
+
+		apb {
++			pmc: pmc@f0014000 {
++				pmc_fast_restart {
++					compatible = "atmel,sama5d2-pmc-fast-startup";
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					atmel,wakeup-rtc-timer;
++
++					wkpin: input@0 {
++						reg = <0>;
++					};
++
++					gmac_wol: input@10 {
++						reg = <10>;
++						atmel,wakeup-active-high;
++					};
++				};
++			};
++
+			isc: isc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+				status = "okay";
+			};
+
++			qspi1: spi@f0024000 {
++				status = "okay";
++			};
++
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+@@ -111,6 +142,18 @@
+				status = "okay";
+			};
+
++			tcb0: timer@f800c000 {
++				timer0: timer@0 {
++					compatible = "atmel,tcb-timer";
++					reg = <0>;
++				};
++
++				timer1: timer@1 {
++					compatible = "atmel,tcb-timer";
++					reg = <1>;
++				};
++			};
++
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+@@ -128,12 +171,14 @@
+			};
+
+			pwm0: pwm@f802c000 {
+-				status = "okay";
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
++				status = "disabled"; /* Conflict with leds. */
+			};
+
+			flx1: flexcom@f8038000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+-				status = "disabled";
++				status = "okay";
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+@@ -147,7 +192,7 @@
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					atmel,fifo-size = <16>;
+-					status = "disabled";
++					status = "okay";
+				};
+			};
+
+@@ -165,17 +210,12 @@
+				status = "okay";
+			};
+
+-			can0: can@f8054000 {
+-				pinctrl-names = "default";
+-				pinctrl-0 = <&pinctrl_can0_default>;
+-			};
+-
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+-				status = "disabled";
++				status = "disabled"; /* Conflict with isc. */
+			};
+
+			uart4: serial@fc00c000 {
+@@ -199,7 +239,7 @@
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					atmel,fifo-size = <32>;
+-					status = "disabled";
++					status = "disabled"; /* Conflict with isc. */
+				};
+
+				spi2: spi@400 {
+@@ -211,7 +251,7 @@
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					atmel,fifo-size = <16>;
+-					status = "disabled";
++					status = "disabled"; /* Conflict with isc. */
+				};
+			};
+
+@@ -228,7 +268,7 @@
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					atmel,fifo-size = <32>;
+-					status = "disabled";
++					status = "disabled"; /* Conflict with spi3 and i2c3. */
+				};
+
+				spi3: spi@400 {
+@@ -240,7 +280,7 @@
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+					atmel,fifo-size = <16>;
+-					status = "okay";
++					status = "okay"; /* Conflict with uart6 and i2c3. */
+				};
+
+				i2c3: i2c@600 {
+@@ -255,7 +295,7 @@
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					atmel,fifo-size = <16>;
+-					status = "disabled";
++					status = "disabled"; /* Conflict with uart6 and spi3. */
+				};
+			};
+
+@@ -268,12 +308,6 @@
+
+			pinctrl@fc038000 {
+
+-				pinctrl_can0_default: can0_default {
+-					pinmux = <PIN_PC10__CANTX0>,
+-						 <PIN_PC11__CANRX0>;
+-					bias-disable;
+-				};
+-
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+@@ -350,7 +384,7 @@
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+-						bias-pull-up;
++						bias-disable;
+					};
+
+					ck_cd_vddsel {
+@@ -368,7 +402,7 @@
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+-						bias-pull-up;
++						bias-disable;
+					};
+
+					conf-ck_cd {
+@@ -512,6 +546,7 @@
+			label = "USER";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
++			wakeup-source;
+		};
+	};
+
+@@ -519,7 +554,7 @@
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+-		status = "okay";
++		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+--- /dev/null
++++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+@@ -0,0 +1,433 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR X11)
++/*
++ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
++ *
++ *  Copyright (C) 2017 Microchip/Atmel,
++ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
++ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
++ */
++/dts-v1/;
++#include "sama5d2.dtsi"
++#include "sama5d2-pinfunc.h"
++#include <dt-bindings/mfd/atmel-flexcom.h>
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/at91.h>
++
++/ {
++	model = "Atmel SAMA5D2 PTC EK";
++	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
++
++	aliases {
++		serial0 = &uart0;
++		i2c0	= &i2c0;
++		i2c1	= &i2c1;
++		i2c2	= &i2c2;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	clocks {
++		slow_xtal {
++			clock-frequency = <32768>;
++		};
++
++		main_xtal {
++			clock-frequency = <24000000>;
++		};
++	};
++
++	ahb {
++		usb0: gadget@300000 {
++			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_usba_vbus>;
++			status = "okay";
++		};
++
++		usb1: ohci@400000 {
++			num-ports = <3>;
++			atmel,vbus-gpio = <0
++					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
++					   0
++					  >;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_usb_default>;
++			status = "okay";
++		};
++
++		usb2: ehci@500000 {
++			status = "okay";
++		};
++
++		ebi: ebi@10000000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_nand_default>;
++			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
++
++			nand_controller: nand-controller {
++				status = "okay";
++
++				nand@3 {
++					reg = <0x3 0x0 0x2>;
++					atmel,rb = <0>;
++					nand-bus-width = <8>;
++					nand-ecc-mode = "hw";
++					nand-on-flash-bbt;
++					label = "atmel_nand";
++
++					partitions {
++						compatible = "fixed-partitions";
++						#address-cells = <1>;
++						#size-cells = <1>;
++
++						at91bootstrap@0 {
++							label = "bootstrap";
++							reg = <0x0 0x40000>;
++						};
++
++						bootloader@40000 {
++							label = "bootloader";
++							reg = <0x40000 0xc0000>;
++						};
++
++						bootloaderenv@0x100000 {
++							label = "bootloader env";
++							reg = <0x100000 0x40000>;
++						};
++
++						bootloaderenvred@0x140000 {
++							label = "bootloader env redundant";
++							reg = <0x140000 0x40000>;
++						};
++
++						dtb@180000 {
++							label = "device tree";
++							reg = <0x180000 0x80000>;
++						};
++
++						kernel@200000 {
++							label = "kernel";
++							reg = <0x200000 0x600000>;
++						};
++
++						rootfs@800000 {
++							label = "rootfs";
++							reg = <0x800000 0x1f800000>;
++						};
++					};
++				};
++			};
++		};
++
++		sdmmc0: sdio-host@a0000000 {
++			bus-width = <8>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_sdmmc0_default>;
++			status = "okay";
++		};
++
++		apb {
++			pmc: pmc@f0014000 {
++				pmc_fast_restart {
++					compatible = "atmel,sama5d2-pmc-fast-startup";
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					atmel,wakeup-rtc-timer;
++
++					wkpin: input@0 {
++						reg = <0>;
++					};
++
++					gmac_wol: input@10 {
++						reg = <10>;
++						atmel,wakeup-active-high;
++					};
++				};
++			};
++
++			spi0: spi@f8000000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_spi0_default>;
++				status = "okay";
++			};
++
++			macb0: ethernet@f8008000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
++				phy-mode = "rmii";
++				status = "okay";
++
++				ethernet-phy@1 {
++					reg = <0x1>;
++					interrupt-parent = <&pioA>;
++					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
++				};
++			};
++
++			tcb0: timer@f800c000 {
++				timer0: timer@0 {
++					compatible = "atmel,tcb-timer";
++					reg = <0>;
++				};
++
++				timer1: timer@1 {
++					compatible = "atmel,tcb-timer";
++					reg = <1>;
++				};
++			};
++
++			uart0: serial@f801c000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_uart0_default>;
++				atmel,use-dma-rx;
++				atmel,use-dma-tx;
++				status = "okay";
++			};
++
++			uart2: serial@f8024000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_uart2_default>;
++				atmel,use-dma-rx;
++				atmel,use-dma-tx;
++				status = "okay";
++			};
++
++			i2c0: i2c@f8028000 {
++				dmas = <0>, <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2c0_default>;
++				status = "okay";
++			};
++
++			flx0: flexcom@f8034000 {
++				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
++				status = "okay";
++
++				i2c2: i2c@600 {
++					compatible = "atmel,sama5d2-i2c";
++					reg = <0x600 0x200>;
++					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
++					dmas = <0>, <0>;
++					dma-names = "tx", "rx";
++					#address-cells = <1>;
++					#size-cells = <0>;
++					clocks = <&flx0_clk>;
++					pinctrl-names = "default";
++					pinctrl-0 = <&pinctrl_flx0_default>;
++					atmel,fifo-size = <16>;
++					status = "okay";
++				};
++			};
++
++			shdwc@f8048010 {
++				atmel,shdwc-debouncer = <976>;
++
++				input@0 {
++					reg = <0>;
++					atmel,wakeup-type = "low";
++				};
++			};
++
++			watchdog@f8048040 {
++				status = "okay";
++			};
++
++			spi1: spi@fc000000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_spi1_default>;
++				status = "okay";
++			};
++
++			i2c1: i2c@fc028000 {
++				dmas = <0>, <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2c1_default>;
++				status = "okay";
++
++				at24@50 {
++					compatible = "24c02";
++					reg = <0x50>;
++					pagesize = <8>;
++				};
++			};
++
++			pinctrl@fc038000 {
++				pinctrl_flx0_default: flx0_default {
++					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
++						 <PIN_PB29__FLEXCOM0_IO1>;
++					bias-disable;
++				};
++
++				pinctrl_i2c0_default: i2c0_default {
++					pinmux = <PIN_PD21__TWD0>,
++						 <PIN_PD22__TWCK0>;
++					bias-disable;
++				};
++
++				pinctrl_i2c1_default: i2c1_default {
++					pinmux = <PIN_PC6__TWD1>,
++						 <PIN_PC7__TWCK1>;
++					bias-disable;
++				};
++
++				pinctrl_key_gpio_default: key_gpio_default {
++					pinmux = <PIN_PA10__GPIO>;
++					bias-pull-up;
++				};
++
++				pinctrl_led_gpio_default: led_gpio_default {
++					pinmux = <PIN_PB6__GPIO>,
++						 <PIN_PB8__GPIO>,
++						 <PIN_PB10__GPIO>;
++					bias-pull-up;
++				};
++
++				pinctrl_macb0_default: macb0_default {
++					pinmux = <PIN_PB14__GTXCK>,
++						 <PIN_PB15__GTXEN>,
++						 <PIN_PB16__GRXDV>,
++						 <PIN_PB17__GRXER>,
++						 <PIN_PB18__GRX0>,
++						 <PIN_PB19__GRX1>,
++						 <PIN_PB20__GTX0>,
++						 <PIN_PB21__GTX1>,
++						 <PIN_PB22__GMDC>,
++						 <PIN_PB23__GMDIO>;
++					bias-disable;
++				};
++
++				pinctrl_macb0_phy_irq: macb0_phy_irq {
++					pinmux = <PIN_PB24__GPIO>;
++					bias-disable;
++				};
++
++				pinctrl_nand_default: nand_default {
++					re_we_data {
++						pinmux = <PIN_PA22__D0>,
++							 <PIN_PA23__D1>,
++							 <PIN_PA24__D2>,
++							 <PIN_PA25__D3>,
++							 <PIN_PA26__D4>,
++							 <PIN_PA27__D5>,
++							 <PIN_PA28__D6>,
++							 <PIN_PA29__D7>,
++							 <PIN_PA30__NWE_NANDWE>,
++							 <PIN_PB2__NRD_NANDOE>;
++						bias-pull-up;
++						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
++					};
++
++					ale_cle_rdy_cs {
++						pinmux = <PIN_PB0__A21_NANDALE>,
++							 <PIN_PB1__A22_NANDCLE>,
++							 <PIN_PC8__NANDRDY>,
++							 <PIN_PA31__NCS3>;
++						bias-pull-up;
++					};
++				};
++
++				pinctrl_sdmmc0_default: sdmmc0_default {
++					cmd_data {
++						pinmux = <PIN_PA1__SDMMC0_CMD>,
++							 <PIN_PA2__SDMMC0_DAT0>,
++							 <PIN_PA3__SDMMC0_DAT1>,
++							 <PIN_PA4__SDMMC0_DAT2>,
++							 <PIN_PA5__SDMMC0_DAT3>,
++							 <PIN_PA6__SDMMC0_DAT4>,
++							 <PIN_PA7__SDMMC0_DAT5>,
++							 <PIN_PA8__SDMMC0_DAT6>,
++							 <PIN_PA9__SDMMC0_DAT7>;
++						bias-pull-up;
++					};
++
++					ck_cd_vddsel {
++						pinmux = <PIN_PA0__SDMMC0_CK>,
++							 <PIN_PA11__SDMMC0_VDDSEL>,
++							 <PIN_PA13__SDMMC0_CD>;
++						bias-disable;
++					};
++				};
++
++				pinctrl_spi0_default: spi0_default {
++					pinmux = <PIN_PA14__SPI0_SPCK>,
++						 <PIN_PA15__SPI0_MOSI>,
++						 <PIN_PA16__SPI0_MISO>,
++						 <PIN_PA17__SPI0_NPCS0>;
++					bias-disable;
++				};
++
++				pinctrl_spi1_default: spi1_default {
++					pinmux = <PIN_PC1__SPI1_SPCK>,
++						 <PIN_PC2__SPI1_MOSI>,
++						 <PIN_PC3__SPI1_MISO>,
++						 <PIN_PC4__SPI1_NPCS0>;
++					bias-disable;
++				};
++
++				pinctrl_uart0_default: uart0_default {
++					pinmux = <PIN_PB26__URXD0>,
++						 <PIN_PB27__UTXD0>;
++					bias-disable;
++				};
++
++				pinctrl_uart2_default: uart2_default {
++					pinmux = <PIN_PD23__URXD2>,
++						 <PIN_PD24__UTXD2>;
++					bias-disable;
++				};
++
++				pinctrl_usb_default: usb_default {
++					pinmux = <PIN_PB12__GPIO>;
++					bias-disable;
++				};
++
++				pinctrl_usba_vbus: usba_vbus {
++					pinmux = <PIN_PB11__GPIO>;
++					bias-disable;
++				};
++
++			};
++
++		};
++	};
++
++	gpio_keys {
++		compatible = "gpio-keys";
++
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_key_gpio_default>;
++
++		bp1 {
++			label = "PB_USER";
++			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
++			linux,code = <0x104>;
++			wakeup-source;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_led_gpio_default>;
++		status = "okay";
++
++		red {
++			label = "red";
++			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
++		};
++
++		green {
++			label = "green";
++			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
++		};
++
++		blue {
++			label = "blue";
++			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++		};
++	};
++};
+--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
++++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+@@ -67,14 +67,14 @@
+	};
+
+	ahb {
+-		usb0: gadget@00300000 {
++		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+-		usb1: ohci@00400000 {
++		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+@@ -85,7 +85,7 @@
+			status = "okay";
+		};
+
+-		usb2: ehci@00500000 {
++		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+@@ -103,9 +103,75 @@
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
++			vqmmc-supply = <&vdd_3v3_reg>;
++			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
++			pmc: pmc@f0014000 {
++				pmc_fast_restart {
++					compatible = "atmel,sama5d2-pmc-fast-startup";
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					atmel,wakeup-rtc-timer;
++
++					wkpin: input@0 {
++						reg = <0>;
++					};
++
++					gmac_wol: input@10 {
++						reg = <10>;
++						atmel,wakeup-active-high;
++					};
++				};
++			};
++
++			qspi0: spi@f0020000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_qspi0_default>;
++				/*status = "okay";*/ /* conflict with sdmmc1 */
++
++				flash@0 {
++					#address-cells = <1>;
++					#size-cells = <1>;
++					compatible = "jedec,spi-nor";
++					reg = <0>;
++					spi-max-frequency = <83000000>;
++					m25p,fast-read;
++
++					at91bootstrap@00000000 {
++						label = "at91bootstrap";
++						reg = <0x00000000 0x00010000>;
++					};
++
++					bootloaderenv@00010000 {
++						label = "bootloader env";
++						reg = <0x00010000 0x00010000>;
++					};
++
++					bootloader@00020000 {
++						label = "bootloader";
++						reg = <0x00020000 0x00050000>;
++					};
++
++					dtb@00070000 {
++						label = "device tree";
++						reg = <0x00070000 0x00010000>;
++					};
++
++					kernel@00080000 {
++						label = "kernel";
++						reg = <0x00080000 0x00380000>;
++					};
++
++					rootfs@00400000 {
++						label = "rootfs";
++						reg = <0x00400000 0x00000000>;
++					};
++				};
++			};
++
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+@@ -131,6 +197,18 @@
+				};
+			};
+
++			tcb0: timer@f800c000 {
++				timer0: timer@0 {
++					compatible = "atmel,tcb-timer";
++					reg = <0>;
++				};
++
++				timer1: timer@1 {
++					compatible = "atmel,tcb-timer";
++					reg = <1>;
++				};
++			};
++
+			pdmic@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pdmic_default>;
+@@ -160,14 +238,6 @@
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+-					active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+-					active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+-					active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
+-					active-semi,input-voltage-threshold-microvolt = <6600>;
+-					active-semi,precondition-timeout = <40>;
+-					active-semi,total-timeout = <3>;
+-					pinctrl-names = "default";
+-					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+					status = "okay";
+
+					regulators {
+@@ -176,6 +246,14 @@
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-on-in-suspend;
++								regulator-suspend-microvolt = <1400000>;
++								/* Power saving mode. */
++								regulator-mode = <0>;
++								regulator-allow-changes-at-runtime;
++							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+@@ -183,6 +261,10 @@
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-off-in-suspend;
++							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+@@ -190,6 +272,10 @@
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-off-in-suspend;
++							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+@@ -197,6 +283,10 @@
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-off-in-suspend;
++							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+@@ -204,6 +294,10 @@
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-off-in-suspend;
++							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+@@ -211,6 +305,10 @@
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-off-in-suspend;
++							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+@@ -218,13 +316,34 @@
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
++
++							regulator-state-mem {
++								regulator-off-in-suspend;
++							};
+						};
+					};
++
++					charger {
++						compatible = "active-semi,act8945a-charger";
++						pinctrl-names = "default";
++						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
++						interrupt-parent = <&pioA>;
++						interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
++
++						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
++						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
++						active-semi,input-voltage-threshold-microvolt = <6600>;
++						active-semi,precondition-timeout = <40>;
++						active-semi,total-timeout = <3>;
++						status = "disabled";
++					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+-				status = "okay";
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
++				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+@@ -258,6 +377,12 @@
+				status = "okay";
+			};
+
++			i2s0: i2s@f8050000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2s0_default>;
++				status = "disabled"; /* conflict with can0 */
++			};
++
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+@@ -401,6 +526,24 @@
+					bias-disable;
+				};
+
++				pinctrl_i2s0_default: i2s0_default {
++					pinmux = <PIN_PC1__I2SC0_CK>,
++						 <PIN_PC2__I2SC0_MCK>,
++						 <PIN_PC3__I2SC0_WS>,
++						 <PIN_PC4__I2SC0_DI0>,
++						 <PIN_PC5__I2SC0_DO0>;
++					bias-disable;
++				};
++
++				pinctrl_i2s1_default: i2s1_default {
++					pinmux = <PIN_PA15__I2SC1_CK>,
++						 <PIN_PA14__I2SC1_MCK>,
++						 <PIN_PA16__I2SC1_WS>,
++						 <PIN_PA17__I2SC1_DI0>,
++						 <PIN_PA18__I2SC1_DO0>;
++					bias-disable;
++				};
++
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+@@ -438,6 +581,22 @@
+					bias-disable;
+				};
+
++				pinctrl_qspi0_default: qspi0_default {
++					sck_cs {
++						pinmux = <PIN_PA22__QSPI0_SCK>,
++							 <PIN_PA23__QSPI0_CS>;
++						bias-disable;
++					};
++
++					data {
++						pinmux = <PIN_PA24__QSPI0_IO0>,
++							 <PIN_PA25__QSPI0_IO1>,
++							 <PIN_PA26__QSPI0_IO2>,
++							 <PIN_PA27__QSPI0_IO3>;
++						bias-pull-up;
++					};
++				};
++
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+@@ -449,7 +608,7 @@
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+-						bias-pull-up;
++						bias-disable;
+					};
+
+					ck_cd_rstn_vddsel {
+@@ -468,7 +627,7 @@
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+-						bias-pull-up;
++						bias-disable;
+					};
+
+					conf-ck_cd {
+@@ -508,6 +667,11 @@
+					bias-disable;
+				};
+
++				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
++					pinmux = <PIN_PB5__PWMH2>,
++						 <PIN_PB6__PWML2>;
++					bias-pull-up;
++				};
+			};
+
+			classd: classd@fc048000 {
+@@ -518,6 +682,12 @@
+				status = "okay";
+			};
+
++			i2s1: i2s@fc04c000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2s1_default>;
++				status = "disabled"; /* conflict with spi0, sdmmc1 */
++			};
++
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+@@ -536,6 +706,7 @@
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
++			wakeup-source;
+		};
+	};
+
+@@ -543,7 +714,7 @@
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+-		status = "okay";
++		status = "okay"; /* conflict with pwm0 */
+
+		red {
+			label = "red";
+--- a/arch/arm/boot/dts/sama5d2.dtsi
++++ b/arch/arm/boot/dts/sama5d2.dtsi
+@@ -47,6 +47,7 @@
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/at91.h>
++#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
+ / {
+	model = "Atmel SAMA5D2 family SoC";
+@@ -58,6 +59,8 @@
+		serial1 = &uart3;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
++		i2s0 = &i2s0;
++		i2s1 = &i2s1;
+	};
+
+	cpus {
+@@ -124,7 +127,7 @@
+		};
+	};
+
+-	ns_sram: sram@00200000 {
++	ns_sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+	};
+@@ -135,13 +138,13 @@
+		#size-cells = <1>;
+		ranges;
+
+-		nfc_sram: sram@00100000 {
++		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00100000 0x2400>;
+		};
+
+-		usb0: gadget@00300000 {
++		usb0: gadget@300000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+@@ -271,7 +274,7 @@
+			};
+		};
+
+-		usb1: ohci@00400000 {
++		usb1: ohci@400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+@@ -280,7 +283,7 @@
+			status = "disabled";
+		};
+
+-		usb2: ehci@00500000 {
++		usb2: ehci@500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+@@ -289,7 +292,7 @@
+			status = "disabled";
+		};
+
+-		L2: cache-controller@00a00000 {
++		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+@@ -840,6 +843,12 @@
+						atmel,clk-output-range = <0 83000000>;
+					};
+
++					ptc_clk: ptc_clk {
++						#clock-cells = <0>;
++						reg = <58>;
++						atmel,clk-output-range = <0 83000000>;
++					};
++
+					classd_clk: classd_clk {
+						#clock-cells = <0>;
+						reg = <59>;
+@@ -992,6 +1001,24 @@
+						atmel,clk-output-range = <0 100000000>;
+					};
+				};
++
++				i2s_clkmux {
++					compatible = "atmel,sama5d2-clk-i2s-mux";
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					i2s0muxck: i2s0_muxclk {
++						clocks = <&i2s0_clk>, <&i2s0_gclk>;
++						#clock-cells = <0>;
++						reg = <0>;
++					};
++
++					i2s1muxck: i2s1_muxclk {
++						clocks = <&i2s1_clk>, <&i2s1_gclk>;
++						#clock-cells = <0>;
++						reg = <1>;
++					};
++				};
+			};
+
+			qspi0: spi@f0020000 {
+@@ -1049,12 +1076,6 @@
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+-				dmas = <&dma0
+-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+-					 AT91_XDMAC_DT_PERID(6))>,
+-				       <&dma0
+-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+-					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+@@ -1094,7 +1115,9 @@
+			};
+
+			tcb0: timer@f800c000 {
+-				compatible = "atmel,at91sam9x5-tcb";
++				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
++				#address-cells = <1>;
++				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+@@ -1102,7 +1125,9 @@
+			};
+
+			tcb1: timer@f8010000 {
+-				compatible = "atmel,at91sam9x5-tcb";
++				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
++				#address-cells = <1>;
++				#size-cells = <0>;
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+@@ -1291,6 +1316,24 @@
+				clocks = <&clk32k>;
+			};
+
++			i2s0: i2s@f8050000 {
++				compatible = "atmel,sama5d2-i2s";
++				reg = <0xf8050000 0x100>;
++				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
++				dmas = <&dma0
++					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
++					 AT91_XDMAC_DT_PERID(31))>,
++				       <&dma0
++					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
++					 AT91_XDMAC_DT_PERID(32))>;
++				dma-names = "tx", "rx";
++				clocks = <&i2s0_clk>, <&i2s0_gclk>;
++				clock-names = "pclk", "gclk";
++				assigned-clocks = <&i2s0muxck>;
++				assigned-clock-parents = <&i2s0_gclk>;
++				status = "disabled";
++			};
++
+			can0: can@f8054000 {
+				compatible = "bosch,m_can";
+				reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
+@@ -1427,10 +1470,23 @@
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&adc_clk>;
+				clock-names = "adc_clk";
++				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
++				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
++				#io-channel-cells = <1>;
++				status = "disabled";
++			};
++
++			resistive_touch: resistive-touch {
++				compatible = "resistive-adc-touch";
++				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
++					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
++					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
++				io-channel-names = "x", "y", "pressure";
++				touchscreen-min-pressure = <50000>;
+				status = "disabled";
+			};
+
+@@ -1482,6 +1538,24 @@
+				status = "disabled";
+			};
+
++			i2s1: i2s@fc04c000 {
++				compatible = "atmel,sama5d2-i2s";
++				reg = <0xfc04c000 0x100>;
++				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
++				dmas = <&dma0
++					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
++					 AT91_XDMAC_DT_PERID(33))>,
++				       <&dma0
++					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
++					 AT91_XDMAC_DT_PERID(34))>;
++				dma-names = "tx", "rx";
++				clocks = <&i2s1_clk>, <&i2s1_gclk>;
++				clock-names = "pclk", "gclk";
++				assigned-clocks = <&i2s1muxck>;
++				assigned-parrents = <&i2s1_gclk>;
++				status = "disabled";
++			};
++
+			can1: can@fc050000 {
+				compatible = "bosch,m_can";
+				reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
+@@ -1503,6 +1577,16 @@
+				reg = <0xfc05c000 0x20>;
+			};
+
++			ptc@fc060000 {
++				compatible = "atmel,sama5d2-ptc";
++				reg = <0x00800000 0x10000
++				       0xfc060000 0xcf>;
++				interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
++				clocks = <&ptc_clk>, <&main>, <&clk32k>;
++				clock-names = "ptc_clk", "ptc_int_osc", "slow_clk";
++				status = "disabled";
++			};
++
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+--- a/drivers/pinctrl/pinctrl-at91-pio4.c
++++ b/drivers/pinctrl/pinctrl-at91-pio4.c
+@@ -14,6 +14,7 @@
+  * GNU General Public License for more details.
+  */
+
++#include <dt-bindings/pinctrl/at91.h>
+ #include <linux/clk.h>
+ #include <linux/gpio/driver.h>
+ /* FIXME: needed for gpio_to_irq(), get rid of this */
+@@ -49,6 +50,8 @@
+ #define		ATMEL_PIO_IFSCEN_MASK		BIT(13)
+ #define		ATMEL_PIO_OPD_MASK		BIT(14)
+ #define		ATMEL_PIO_SCHMITT_MASK		BIT(15)
++#define		ATMEL_PIO_DRVSTR_MASK		GENMASK(17, 16)
++#define		ATMEL_PIO_DRVSTR_OFFSET		16
+ #define		ATMEL_PIO_CFGR_EVTSEL_MASK	GENMASK(26, 24)
+ #define		ATMEL_PIO_CFGR_EVTSEL_FALLING	(0 << 24)
+ #define		ATMEL_PIO_CFGR_EVTSEL_RISING	(1 << 24)
+@@ -75,6 +78,9 @@
+ #define ATMEL_GET_PIN_FUNC(pinfunc)	((pinfunc >> 16) & 0xf)
+ #define ATMEL_GET_PIN_IOSET(pinfunc)	((pinfunc >> 20) & 0xf)
+
++/* Custom pinconf parameters */
++#define ATMEL_PIN_CONFIG_DRIVE_STRENGTH	(PIN_CONFIG_END + 1)
++
+ struct atmel_pioctrl_data {
+	unsigned nbanks;
+ };
+@@ -139,6 +145,10 @@ static const char * const atmel_functions[] = {
+	"GPIO", "A", "B", "C", "D", "E", "F", "G"
+ };
+
++static const struct pinconf_generic_params atmel_custom_bindings[] = {
++	{"atmel,drive-strength", ATMEL_PIN_CONFIG_DRIVE_STRENGTH, 0},
++};
++
+ /* --- GPIO --- */
+ static unsigned int atmel_gpio_read(struct atmel_pioctrl *atmel_pioctrl,
+				    unsigned int bank, unsigned int reg)
+@@ -358,6 +368,8 @@ static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+ }
+
+ static struct gpio_chip atmel_gpio_chip = {
++	.request		= gpiochip_generic_request,
++	.free			= gpiochip_generic_free,
+	.direction_input        = atmel_gpio_direction_input,
+	.get                    = atmel_gpio_get,
+	.direction_output       = atmel_gpio_direction_output,
+@@ -645,11 +657,27 @@ static int atmel_pmx_set_mux(struct pinctrl_dev *pctldev,
+	return 0;
+ }
+
++static int atmel_pmx_gpio_request_enable(struct pinctrl_dev *pctldev,
++					 struct pinctrl_gpio_range *range,
++					 unsigned offset)
++{
++	u32 conf;
++
++	conf = atmel_pin_config_read(pctldev, offset);
++	conf &= (~ATMEL_PIO_CFGR_FUNC_MASK);
++	atmel_pin_config_write(pctldev, offset, conf);
++
++	dev_dbg(pctldev->dev, "enable pin %u as GPIO\n", offset);
++
++	return 0;
++}
++
+ static const struct pinmux_ops atmel_pmxops = {
+	.get_functions_count	= atmel_pmx_get_functions_count,
+	.get_function_name	= atmel_pmx_get_function_name,
+	.get_function_groups	= atmel_pmx_get_function_groups,
+	.set_mux		= atmel_pmx_set_mux,
++	.gpio_request_enable	= atmel_pmx_gpio_request_enable,
+ };
+
+ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
+@@ -692,6 +720,11 @@ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
+			return -EINVAL;
+		arg = 1;
+		break;
++	case ATMEL_PIN_CONFIG_DRIVE_STRENGTH:
++		if (!(res & ATMEL_PIO_DRVSTR_MASK))
++			return -EINVAL;
++		arg = (res & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET;
++		break;
+	default:
+		return -ENOTSUPP;
+	}
+@@ -777,6 +810,18 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+					ATMEL_PIO_SODR);
+			}
+			break;
++		case ATMEL_PIN_CONFIG_DRIVE_STRENGTH:
++			switch (arg) {
++			case ATMEL_PIO_DRVSTR_LO:
++			case ATMEL_PIO_DRVSTR_ME:
++			case ATMEL_PIO_DRVSTR_HI:
++				conf &= (~ATMEL_PIO_DRVSTR_MASK);
++				conf |= arg << ATMEL_PIO_DRVSTR_OFFSET;
++				break;
++			default:
++				dev_warn(pctldev->dev, "drive strength not updated (incorrect value)\n");
++			}
++			break;
+		default:
+			dev_warn(pctldev->dev,
+				 "unsupported configuration parameter: %u\n",
+@@ -816,6 +861,19 @@ static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev,
+		seq_printf(s, "%s ", "open-drain");
+	if (conf & ATMEL_PIO_SCHMITT_MASK)
+		seq_printf(s, "%s ", "schmitt");
++	if (conf & ATMEL_PIO_DRVSTR_MASK) {
++		switch ((conf & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET) {
++		case ATMEL_PIO_DRVSTR_ME:
++			seq_printf(s, "%s ", "medium-drive");
++			break;
++		case ATMEL_PIO_DRVSTR_HI:
++			seq_printf(s, "%s ", "high-drive");
++			break;
++		/* ATMEL_PIO_DRVSTR_LO and 0 which is the default value at reset */
++		default:
++			seq_printf(s, "%s ", "low-drive");
++		}
++	}
+ }
+
+ static const struct pinconf_ops atmel_confops = {
+@@ -883,7 +941,7 @@ static int __maybe_unused atmel_pctrl_resume(struct device *dev)
+ }
+
+ static const struct dev_pm_ops atmel_pctrl_pm_ops = {
+-	SET_SYSTEM_SLEEP_PM_OPS(atmel_pctrl_suspend, atmel_pctrl_resume)
++	SET_LATE_SYSTEM_SLEEP_PM_OPS(atmel_pctrl_suspend, atmel_pctrl_resume)
+ };
+
+ /*
+@@ -956,6 +1014,8 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
+		return -ENOMEM;
+	atmel_pinctrl_desc.pins = pin_desc;
+	atmel_pinctrl_desc.npins = atmel_pioctrl->npins;
++	atmel_pinctrl_desc.num_custom_params = ARRAY_SIZE(atmel_custom_bindings);
++	atmel_pinctrl_desc.custom_params = atmel_custom_bindings;
+
+	/* One pin is one group since a pin can achieve all functions. */
+	group_names = devm_kzalloc(dev, sizeof(*group_names)
+--- /dev/null
++++ b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h
+@@ -0,0 +1,16 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * This header provides constants for configuring the AT91 SAMA5D2 ADC
++ */
++
++#ifndef _DT_BINDINGS_IIO_ADC_AT91_SAMA5D2_ADC_H
++#define _DT_BINDINGS_IIO_ADC_AT91_SAMA5D2_ADC_H
++
++/* X relative position channel index */
++#define AT91_SAMA5D2_ADC_X_CHANNEL		24
++/* Y relative position channel index */
++#define AT91_SAMA5D2_ADC_Y_CHANNEL		25
++/* pressure channel index */
++#define AT91_SAMA5D2_ADC_P_CHANNEL		26
++
++#endif
+--- a/include/dt-bindings/pinctrl/at91.h
++++ b/include/dt-bindings/pinctrl/at91.h
+@@ -39,4 +39,8 @@
+ #define AT91_PERIPH_C		3
+ #define AT91_PERIPH_D		4
+
++#define ATMEL_PIO_DRVSTR_LO	1
++#define ATMEL_PIO_DRVSTR_ME	2
++#define ATMEL_PIO_DRVSTR_HI	3
++
+ #endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */
+--
+2.7.4
diff --git a/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch
deleted file mode 100644
index 1cee558..0000000
--- a/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	at91-ariettag25.dtb \
- 	at91-cosino_mega2560.dtb \
- 	at91-kizboxmini.dtb \
-+	at91-q5xr5.dtb \
- 	at91sam9g15ek.dtb \
- 	at91sam9g25ek.dtb \
- 	at91sam9g35ek.dtb \
diff --git a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch b/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
deleted file mode 100644
index 20c69f3..0000000
--- a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
+++ /dev/null
@@ -1,893 +0,0 @@
---- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
-@@ -35,7 +35,12 @@ right representation of the pin.
- Optional properties:
- - GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
- bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
--input-debounce, output-low, output-high.
-+input-debounce, output-low, output-high, drive-strength.
-+
-+Concerning the drive-strength property, the values accepted are
-+ATMEL_PIO_DRVSTR_LO, ATMEL_PIO_DRVSTR_ME, ATMEL_PIO_DRVSTR_HI. The current
-+depends on VDDIOP. You can find the details in the DC Characteristics table
-+from the datasheet.
- 
- Example:
- 
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
-+	at91-sama5d27_som1_ek.dtb \
- 	at91-sama5d2_xplained.dtb \
- 	at91-sama5d3_xplained.dtb \
- 	sama5d31ek.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
-@@ -0,0 +1,175 @@
-+/*
-+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
-+ *
-+ *  Copyright (c) 2017, Microchip Technology Inc.
-+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
-+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+#include "sama5d2.dtsi"
-+#include "sama5d2-pinfunc.h"
-+
-+/ {
-+	model = "Atmel SAMA5D27 SoM1";
-+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-+
-+	clocks {
-+		slow_xtal {
-+			clock-frequency = <32768>;
-+		};
-+
-+		main_xtal {
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+
-+	ahb {
-+		apb {
-+			qspi1: spi@f0024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_qspi1_default>;
-+
-+				flash@0 {
-+					#address-cells = <1>;
-+					#size-cells = <1>;
-+					compatible = "jedec,spi-nor";
-+					reg = <0>;
-+					spi-max-frequency = <80000000>;
-+					m25p,fast-read;
-+
-+					at91bootstrap@00000000 {
-+						label = "at91bootstrap";
-+						reg = <0x00000000 0x00010000>;
-+					};
-+
-+					bootloader@00010000 {
-+						label = "bootloader";
-+						reg = <0x00010000 0x000a0000>;
-+					};
-+
-+					bootloaderenv@000b0000 {
-+						label = "bootloader env";
-+						reg = <0x000b0000 0x00010000>;
-+					};
-+
-+					dtb@000c0000 {
-+						label = "device tree";
-+						reg = <0x000c0000 0x0020000>;
-+					};
-+
-+					kernel@000e0000 {
-+						label = "kernel";
-+						reg = <0x000e0000 0x0400000>;
-+					};
-+				};
-+			};
-+
-+			macb0: ethernet@f8008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_macb0_default>;
-+				phy-mode = "rmii";
-+
-+				ethernet-phy@0 {
-+					reg = <0x0>;
-+					interrupt-parent = <&pioA>;
-+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
-+				};
-+			};
-+
-+			i2c0: i2c@f8028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c0_default>;
-+				status = "okay";
-+
-+				at24@50 {
-+					compatible = "24c02";
-+					reg = <0x50>;
-+					pagesize = <8>;
-+				};
-+			};
-+
-+			pinctrl@fc038000 {
-+				pinctrl_i2c0_default: i2c0_default {
-+					pinmux = <PIN_PD21__TWD0>,
-+						 <PIN_PD22__TWCK0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_qspi1_default: qspi1_default {
-+					sck_cs {
-+						pinmux = <PIN_PB5__QSPI1_SCK>,
-+							 <PIN_PB6__QSPI1_CS>;
-+						bias-disable;
-+					};
-+
-+					data {
-+						pinmux = <PIN_PB7__QSPI1_IO0>,
-+							 <PIN_PB8__QSPI1_IO1>,
-+							 <PIN_PB9__QSPI1_IO2>,
-+							 <PIN_PB10__QSPI1_IO3>;
-+						bias-pull-up;
-+					};
-+				};
-+
-+				pinctrl_macb0_default: macb0_default {
-+					pinmux = <PIN_PD9__GTXCK>,
-+						 <PIN_PD10__GTXEN>,
-+						 <PIN_PD11__GRXDV>,
-+						 <PIN_PD12__GRXER>,
-+						 <PIN_PD13__GRX0>,
-+						 <PIN_PD14__GRX1>,
-+						 <PIN_PD15__GTX0>,
-+						 <PIN_PD16__GTX1>,
-+						 <PIN_PD17__GMDC>,
-+						 <PIN_PD18__GMDIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_macb0_phy_irq: macb0_phy_irq {
-+					pinmux = <PIN_PD31__GPIO>;
-+					bias-disable;
-+				};
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
-@@ -0,0 +1,53 @@
-+/*
-+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
-+ *
-+ *  Copyright (c) 2017, Microchip Technology Inc.
-+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
-+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
-+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/dts-v1/;
-+#include "at91-sama5d27_som1_ek_common.dtsi"
-+
-+/ {
-+	model = "Atmel SAMA5D27 SOM1 EK";
-+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi
-@@ -0,0 +1,619 @@
-+/*
-+ * at91-sama5d27_som1_ek_common.dtsi - Device Tree file for SAMA5D27-SOM1-EK board
-+ *
-+ *  Copyright (c) 2017, Microchip Technology Inc.
-+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
-+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
-+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+#include "at91-sama5d27_som1.dtsi"
-+#include <dt-bindings/mfd/atmel-flexcom.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/at91.h>
-+
-+/ {
-+	model = "Atmel SAMA5D27 SOM1 EK";
-+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-+
-+	aliases {
-+		serial0 = &uart1;	/* DBGU */
-+		serial1 = &uart4;	/* mikro BUS 1 */
-+		serial2 = &uart2;	/* mikro BUS 2 */
-+		i2c1	= &i2c1;
-+		i2c2	= &i2c2;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	ahb {
-+		usb0: gadget@00300000 {
-+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usba_vbus>;
-+			status = "okay";
-+		};
-+
-+		usb1: ohci@00400000 {
-+			num-ports = <3>;
-+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
-+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
-+					   0
-+					  >;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usb_default>;
-+			status = "okay";
-+		};
-+
-+		usb2: ehci@00500000 {
-+			status = "okay";
-+		};
-+
-+		sdmmc0: sdio-host@a0000000 {
-+			bus-width = <8>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-+			status = "okay";
-+		};
-+
-+		sdmmc1: sdio-host@b0000000 {
-+			bus-width = <4>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
-+			status = "okay";
-+		};
-+
-+		apb {
-+			hlcdc: hlcdc@f0000000 {
-+				status = "disabled";
-+
-+				hlcdc-display-controller {
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb>;
-+				};
-+
-+				hlcdc_pwm: hlcdc-pwm {
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_lcd_pwm>;
-+				};
-+			};
-+
-+			pmc: pmc@f0014000 {
-+				pmc_fast_restart {
-+					compatible = "atmel,sama5d2-pmc-fast-startup";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					atmel,wakeup-rtc-timer;
-+
-+					wkpin: input@0 {
-+						reg = <0>;
-+					};
-+
-+					gmac_wol: input@10 {
-+						reg = <10>;
-+						atmel,wakeup-active-high;
-+					};
-+				};
-+			};
-+
-+			isc: isc@f0008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-+				status = "okay";
-+			};
-+
-+			qspi1: spi@f0024000 {
-+				status = "okay";
-+			};
-+
-+			spi0: spi@f8000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi0_default>;
-+				status = "okay";
-+			};
-+
-+			macb0: ethernet@f8008000 {
-+				status = "okay";
-+			};
-+
-+			uart1: serial@f8020000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart1_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			uart2: serial@f8024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			pwm0: pwm@f802c000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
-+				status = "disabled"; /* Conflict with leds. */
-+			};
-+
-+			flx1: flexcom@f8038000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+				status = "okay";
-+
-+				i2c2: i2c@600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx1_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+			};
-+
-+			shdwc@f8048010 {
-+				atmel,shdwc-debouncer = <976>;
-+				atmel,wakeup-rtc-timer;
-+
-+				input@0 {
-+					reg = <0>;
-+					atmel,wakeup-type = "low";
-+				};
-+			};
-+
-+			watchdog@f8048040 {
-+				status = "okay";
-+			};
-+
-+			uart3: serial@fc008000 {
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart3_default>;
-+				status = "disabled"; /* Conflict with isc. */
-+			};
-+
-+			uart4: serial@fc00c000 {
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
-+				status = "okay";
-+			};
-+
-+			flx3: flexcom@fc014000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-+				status = "disabled";
-+
-+				uart7: serial@200 {
-+					compatible = "atmel,at91sam9260-usart";
-+					reg = <0x200 0x200>;
-+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx3_clk>;
-+					clock-names = "usart";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx3_default>;
-+					atmel,fifo-size = <32>;
-+					status = "disabled"; /* Conflict with isc. */
-+				};
-+
-+				spi2: spi@400 {
-+					compatible = "atmel,at91rm9200-spi";
-+					reg = <0x400 0x200>;
-+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx3_clk>;
-+					clock-names = "spi_clk";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx3_default>;
-+					atmel,fifo-size = <16>;
-+					status = "disabled"; /* Conflict with isc. */
-+				};
-+			};
-+
-+			flx4: flexcom@fc018000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-+				status = "okay";
-+
-+				uart6: serial@200 {
-+					compatible = "atmel,at91sam9260-usart";
-+					reg = <0x200 0x200>;
-+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx4_clk>;
-+					clock-names = "usart";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx4_default>;
-+					atmel,fifo-size = <32>;
-+					status = "disabled"; /* Conflict with spi3 and i2c3. */
-+				};
-+
-+				spi3: spi@400 {
-+					compatible = "atmel,at91rm9200-spi";
-+					reg = <0x400 0x200>;
-+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx4_clk>;
-+					clock-names = "spi_clk";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+
-+				i2c3: i2c@600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx4_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx4_default>;
-+					atmel,fifo-size = <16>;
-+					status = "disabled"; /* Conflict with uart6 and spi3. */
-+				};
-+			};
-+
-+			i2c1: i2c@fc028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c1_default>;
-+				status = "okay";
-+			};
-+
-+			pinctrl@fc038000 {
-+
-+				pinctrl_lcd_base: pinctrl_lcd_base {
-+					pinmux = <PIN_PC5__LCDVSYNC>,
-+						 <PIN_PC6__LCDHSYNC>,
-+						 <PIN_PC8__LCDDEN>,
-+						 <PIN_PC7__LCDPCK>;
-+					bias-disable;
-+					drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-+				};
-+
-+				pinctrl_lcd_rgb: pinctrl_lcd_rgb {
-+					pinmux = <PIN_PB11__LCDDAT0>,
-+						 <PIN_PB12__LCDDAT1>,
-+						 <PIN_PB13__LCDDAT2>,
-+						 <PIN_PB14__LCDDAT3>,
-+						 <PIN_PB15__LCDDAT4>,
-+						 <PIN_PB16__LCDDAT5>,
-+						 <PIN_PB17__LCDDAT6>,
-+						 <PIN_PB18__LCDDAT7>,
-+						 <PIN_PB19__LCDDAT8>,
-+						 <PIN_PB20__LCDDAT9>,
-+						 <PIN_PB21__LCDDAT10>,
-+						 <PIN_PB22__LCDDAT11>,
-+						 <PIN_PB23__LCDDAT12>,
-+						 <PIN_PB24__LCDDAT13>,
-+						 <PIN_PB25__LCDDAT14>,
-+						 <PIN_PB26__LCDDAT15>,
-+						 <PIN_PB27__LCDDAT16>,
-+						 <PIN_PB28__LCDDAT17>,
-+						 <PIN_PB29__LCDDAT18>,
-+						 <PIN_PB30__LCDDAT19>,
-+						 <PIN_PB31__LCDDAT20>,
-+						 <PIN_PC0__LCDDAT21>,
-+						 <PIN_PC1__LCDDAT22>,
-+						 <PIN_PC2__LCDDAT23>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_lcd_pwm: pinctrl_lcd_pwm {
-+					pinmux = <PIN_PC3__LCDPWM>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_can1_default: can1_default {
-+					pinmux = <PIN_PC26__CANTX1>,
-+						 <PIN_PC27__CANRX1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_flx3_default: flx3_default {
-+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
-+						 <PIN_PC19__FLEXCOM3_IO1>,
-+						 <PIN_PC18__FLEXCOM3_IO2>,
-+						 <PIN_PC21__FLEXCOM3_IO3>,
-+						 <PIN_PC22__FLEXCOM3_IO4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c1_default: i2c1_default {
-+					pinmux = <PIN_PD4__TWD1>,
-+						 <PIN_PD5__TWCK1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_base: isc_base {
-+					pinmux = <PIN_PC21__ISC_PCK>,
-+						 <PIN_PC22__ISC_VSYNC>,
-+						 <PIN_PC23__ISC_HSYNC>,
-+						 <PIN_PC24__ISC_MCK>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_data_8bit: isc_data_8bit {
-+					pinmux = <PIN_PC20__ISC_D11>,
-+						 <PIN_PC19__ISC_D10>,
-+						 <PIN_PC18__ISC_D9>,
-+						 <PIN_PC17__ISC_D8>,
-+						 <PIN_PC16__ISC_D7>,
-+						 <PIN_PC15__ISC_D6>,
-+						 <PIN_PC14__ISC_D5>,
-+						 <PIN_PC13__ISC_D4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_data_9_10: isc_data_9_10 {
-+					pinmux = <PIN_PC12__ISC_D3>,
-+						 <PIN_PC11__ISC_D2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_data_11_12: isc_data_11_12 {
-+					pinmux = <PIN_PC10__ISC_D1>,
-+						 <PIN_PC9__ISC_D0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_key_gpio_default: key_gpio_default {
-+					pinmux = <PIN_PA29__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_led_gpio_default: led_gpio_default {
-+					pinmux = <PIN_PA10__GPIO>,
-+						 <PIN_PB1__GPIO>,
-+						 <PIN_PA31__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_sdmmc0_default: sdmmc0_default {
-+					cmd_data {
-+						pinmux = <PIN_PA1__SDMMC0_CMD>,
-+							 <PIN_PA2__SDMMC0_DAT0>,
-+							 <PIN_PA3__SDMMC0_DAT1>,
-+							 <PIN_PA4__SDMMC0_DAT2>,
-+							 <PIN_PA5__SDMMC0_DAT3>,
-+							 <PIN_PA6__SDMMC0_DAT4>,
-+							 <PIN_PA7__SDMMC0_DAT5>,
-+							 <PIN_PA8__SDMMC0_DAT6>,
-+							 <PIN_PA9__SDMMC0_DAT7>;
-+						bias-disable;
-+					};
-+
-+					ck_cd_vddsel {
-+						pinmux = <PIN_PA0__SDMMC0_CK>,
-+							 <PIN_PA11__SDMMC0_VDDSEL>,
-+							 <PIN_PA13__SDMMC0_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_sdmmc1_default: sdmmc1_default {
-+					cmd_data {
-+						pinmux = <PIN_PA28__SDMMC1_CMD>,
-+							 <PIN_PA18__SDMMC1_DAT0>,
-+							 <PIN_PA19__SDMMC1_DAT1>,
-+							 <PIN_PA20__SDMMC1_DAT2>,
-+							 <PIN_PA21__SDMMC1_DAT3>;
-+						bias-disable;
-+					};
-+
-+					conf-ck_cd {
-+						pinmux = <PIN_PA22__SDMMC1_CK>,
-+							 <PIN_PA30__SDMMC1_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_spi0_default: spi0_default {
-+					pinmux = <PIN_PA14__SPI0_SPCK>,
-+						 <PIN_PA15__SPI0_MOSI>,
-+						 <PIN_PA16__SPI0_MISO>,
-+						 <PIN_PA17__SPI0_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart1_default: uart1_default {
-+					pinmux = <PIN_PD2__URXD1>,
-+						 <PIN_PD3__UTXD1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart3_default: uart3_default {
-+					pinmux = <PIN_PC12__URXD3>,
-+						 <PIN_PC13__UTXD3>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usb_default: usb_default {
-+					pinmux = <PIN_PA27__GPIO>,
-+						 <PIN_PD19__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usba_vbus: usba_vbus {
-+					pinmux = <PIN_PD20__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_an: mikrobus1_an {
-+					pinmux = <PIN_PD25__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_an: mikrobus2_an {
-+					pinmux = <PIN_PD26__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_rst: mikrobus1_rst {
-+					pinmux = <PIN_PB2__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_rst: mikrobus2_rst {
-+					pinmux = <PIN_PA26__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
-+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus_spi: mikrobus_spi {
-+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-+						 <PIN_PC29__FLEXCOM4_IO1>,
-+						 <PIN_PC30__FLEXCOM4_IO2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
-+					pinmux = <PIN_PB1__PWML1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
-+					pinmux = <PIN_PA31__PWML0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_int: mikrobus1_int {
-+					pinmux = <PIN_PB0__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_int: mikrobus2_int {
-+					pinmux = <PIN_PA25__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_uart: mikrobus1_uart {
-+					pinmux = <PIN_PB3__URXD4>,
-+						 <PIN_PB4__UTXD4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_uart: mikrobus2_uart {
-+					pinmux = <PIN_PD23__URXD2>,
-+						 <PIN_PD24__UTXD2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
-+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
-+						 <PIN_PA23__FLEXCOM1_IO1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_flx4_default: flx4_uart_default {
-+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-+						 <PIN_PC29__FLEXCOM4_IO1>,
-+						 <PIN_PC30__FLEXCOM4_IO2>,
-+						 <PIN_PC31__FLEXCOM4_IO3>,
-+						 <PIN_PD0__FLEXCOM4_IO4>;
-+					bias-disable;
-+				};
-+			};
-+
-+			can1: can@fc050000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_can1_default>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_key_gpio_default>;
-+
-+		pb4 {
-+			label = "USER";
-+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-+			linux,code = <0x104>;
-+			wakeup-source;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_led_gpio_default>;
-+		status = "okay"; /* Conflict with pwm0. */
-+
-+		red {
-+			label = "red";
-+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		green {
-+			label = "green";
-+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		blue {
-+			label = "blue";
-+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+};
---- a/include/dt-bindings/pinctrl/at91.h
-+++ b/include/dt-bindings/pinctrl/at91.h
-@@ -37,4 +37,8 @@
- #define AT91_PERIPH_C		3
- #define AT91_PERIPH_D		4
- 
-+#define ATMEL_PIO_DRVSTR_LO	1
-+#define ATMEL_PIO_DRVSTR_ME	2
-+#define ATMEL_PIO_DRVSTR_HI	3
-+
- #endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */
diff --git a/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch b/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
deleted file mode 100644
index e33840c..0000000
--- a/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
+++ /dev/null
@@ -1,435 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
-+	at91-sama5d2_ptc_ek.dtb \
- 	at91-sama5d27_som1_ek.dtb \
- 	at91-sama5d2_xplained.dtb \
- 	at91-sama5d3_xplained.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
-@@ -0,0 +1,422 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-+/*
-+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
-+ *
-+ *  Copyright (C) 2017 Microchip/Atmel,
-+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
-+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
-+ */
-+/dts-v1/;
-+#include "sama5d2.dtsi"
-+#include "sama5d2-pinfunc.h"
-+#include <dt-bindings/mfd/atmel-flexcom.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/at91.h>
-+
-+/ {
-+	model = "Atmel SAMA5D2 PTC EK";
-+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		i2c0	= &i2c0;
-+		i2c1	= &i2c1;
-+		i2c2	= &i2c2;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory {
-+		reg = <0x20000000 0x80000>;
-+	};
-+
-+	clocks {
-+		slow_xtal {
-+			clock-frequency = <32768>;
-+		};
-+
-+		main_xtal {
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+
-+	ahb {
-+		usb0: gadget@00300000 {
-+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usba_vbus>;
-+			status = "okay";
-+		};
-+
-+		usb1: ohci@00400000 {
-+			num-ports = <3>;
-+			atmel,vbus-gpio = <0
-+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
-+					   0
-+					  >;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usb_default>;
-+			status = "okay";
-+		};
-+
-+		usb2: ehci@00500000 {
-+			status = "okay";
-+		};
-+
-+		nand0: nand@80000000 {
-+			nand-bus-width = <8>;
-+			nand-ecc-mode = "hw";
-+			nand-on-flash-bbt;
-+			atmel,has-pmecc;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_nand_default>;
-+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
-+
-+			at91bootstrap@0 {
-+				label = "bootstrap";
-+				reg = <0x0 0x40000>;
-+			};
-+
-+			bootloader@40000 {
-+				label = "bootloader";
-+				reg = <0x40000 0xc0000>;
-+			};
-+
-+			bootloaderenv@0x100000 {
-+				label = "bootloader env";
-+				reg = <0x100000 0x40000>;
-+			};
-+
-+			bootloaderenvred@0x140000 {
-+				label = "bootloader env redundant";
-+				reg = <0x140000 0x40000>;
-+			};
-+
-+			dtb@180000 {
-+				label = "device tree";
-+				reg = <0x180000 0x80000>;
-+			};
-+
-+			kernel@200000 {
-+				label = "kernel";
-+				reg = <0x200000 0x600000>;
-+			};
-+
-+			rootfs@800000 {
-+				label = "rootfs";
-+				reg = <0x800000 0x1f800000>;
-+			};
-+		};
-+
-+		sdmmc0: sdio-host@a0000000 {
-+			bus-width = <8>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-+			status = "okay";
-+		};
-+
-+		apb {
-+			pmc: pmc@f0014000 {
-+				pmc_fast_restart {
-+					compatible = "atmel,sama5d2-pmc-fast-startup";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					atmel,wakeup-rtc-timer;
-+
-+					wkpin: input@0 {
-+						reg = <0>;
-+					};
-+
-+					gmac_wol: input@10 {
-+						reg = <10>;
-+						atmel,wakeup-active-high;
-+					};
-+				};
-+			};
-+
-+			spi0: spi@f8000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi0_default>;
-+				status = "okay";
-+
-+				/*
-+				m25p80@0 {
-+					compatible = "atmel,at25df321a";
-+					reg = <0>;
-+					spi-max-frequency = <50000000>;
-+				};
-+				*/
-+			};
-+
-+			macb0: ethernet@f8008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
-+				phy-mode = "rmii";
-+				status = "okay";
-+
-+				ethernet-phy@1 {
-+					reg = <0x1>;
-+					interrupt-parent = <&pioA>;
-+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
-+				};
-+			};
-+
-+			uart0: serial@f801c000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart0_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			uart2: serial@f8024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart2_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			i2c0: i2c@f8028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c0_default>;
-+				i2c-sda-hold-time-ns = <350>;
-+				status = "okay";
-+			};
-+
-+			flx0: flexcom@f8034000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+				status = "okay";
-+
-+				i2c2: i2c@600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx0_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx0_default>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+			};
-+
-+			shdwc@f8048010 {
-+				atmel,shdwc-debouncer = <976>;
-+
-+				input@0 {
-+					reg = <0>;
-+					atmel,wakeup-type = "low";
-+				};
-+			};
-+
-+			watchdog@f8048040 {
-+				status = "okay";
-+			};
-+
-+			spi1: spi@fc000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi1_default>;
-+				status = "okay";
-+			};
-+
-+			i2c1: i2c@fc028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c1_default>;
-+				status = "okay";
-+
-+				at24@50 {
-+					compatible = "24c02";
-+					reg = <0x50>;
-+					pagesize = <8>;
-+				};
-+			};
-+
-+			pinctrl@fc038000 {
-+				pinctrl_flx0_default: flx0_default {
-+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-+						 <PIN_PB29__FLEXCOM0_IO1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c0_default: i2c0_default {
-+					pinmux = <PIN_PD21__TWD0>,
-+						 <PIN_PD22__TWCK0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c1_default: i2c1_default {
-+					pinmux = <PIN_PC6__TWD1>,
-+						 <PIN_PC7__TWCK1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_key_gpio_default: key_gpio_default {
-+					pinmux = <PIN_PA10__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_led_gpio_default: led_gpio_default {
-+					pinmux = <PIN_PB6__GPIO>,
-+						 <PIN_PB8__GPIO>,
-+						 <PIN_PB10__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_macb0_default: macb0_default {
-+					pinmux = <PIN_PB14__GTXCK>,
-+						 <PIN_PB15__GTXEN>,
-+						 <PIN_PB16__GRXDV>,
-+						 <PIN_PB17__GRXER>,
-+						 <PIN_PB18__GRX0>,
-+						 <PIN_PB19__GRX1>,
-+						 <PIN_PB20__GTX0>,
-+						 <PIN_PB21__GTX1>,
-+						 <PIN_PB22__GMDC>,
-+						 <PIN_PB23__GMDIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_macb0_phy_irq: macb0_phy_irq {
-+					pinmux = <PIN_PB24__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_nand_default: nand_default {
-+					re_we_data {
-+						pinmux = <PIN_PA22__D0>,
-+							 <PIN_PA23__D1>,
-+							 <PIN_PA24__D2>,
-+							 <PIN_PA25__D3>,
-+							 <PIN_PA26__D4>,
-+							 <PIN_PA27__D5>,
-+							 <PIN_PA28__D6>,
-+							 <PIN_PA29__D7>,
-+							 <PIN_PA30__NWE_NANDWE>,
-+							 <PIN_PB2__NRD_NANDOE>;
-+						bias-pull-up;
-+						drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-+					};
-+
-+					ale_cle_rdy_cs {
-+						pinmux = <PIN_PB0__A21_NANDALE>,
-+							 <PIN_PB1__A22_NANDCLE>,
-+							 <PIN_PC8__NANDRDY>,
-+							 <PIN_PA31__NCS3>;
-+						bias-pull-up;
-+					};
-+				};
-+
-+				pinctrl_sdmmc0_default: sdmmc0_default {
-+					cmd_data {
-+						pinmux = <PIN_PA1__SDMMC0_CMD>,
-+							 <PIN_PA2__SDMMC0_DAT0>,
-+							 <PIN_PA3__SDMMC0_DAT1>,
-+							 <PIN_PA4__SDMMC0_DAT2>,
-+							 <PIN_PA5__SDMMC0_DAT3>,
-+							 <PIN_PA6__SDMMC0_DAT4>,
-+							 <PIN_PA7__SDMMC0_DAT5>,
-+							 <PIN_PA8__SDMMC0_DAT6>,
-+							 <PIN_PA9__SDMMC0_DAT7>;
-+						bias-pull-up;
-+					};
-+
-+					ck_cd_vddsel {
-+						pinmux = <PIN_PA0__SDMMC0_CK>,
-+							 <PIN_PA11__SDMMC0_VDDSEL>,
-+							 <PIN_PA13__SDMMC0_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_spi0_default: spi0_default {
-+					pinmux = <PIN_PA14__SPI0_SPCK>,
-+						 <PIN_PA15__SPI0_MOSI>,
-+						 <PIN_PA16__SPI0_MISO>,
-+						 <PIN_PA17__SPI0_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_spi1_default: spi1_default {
-+					pinmux = <PIN_PC1__SPI1_SPCK>,
-+						 <PIN_PC2__SPI1_MOSI>,
-+						 <PIN_PC3__SPI1_MISO>,
-+						 <PIN_PC4__SPI1_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart0_default: uart0_default {
-+					pinmux = <PIN_PB26__URXD0>,
-+						 <PIN_PB27__UTXD0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart2_default: uart2_default {
-+					pinmux = <PIN_PD23__URXD2>,
-+						 <PIN_PD24__UTXD2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usb_default: usb_default {
-+					pinmux = <PIN_PB12__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usba_vbus: usba_vbus {
-+					pinmux = <PIN_PB11__GPIO>;
-+					bias-disable;
-+				};
-+
-+			};
-+
-+			ptc@fc060000 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_key_gpio_default>;
-+
-+		bp1 {
-+			label = "PB_USER";
-+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-+			linux,code = <0x104>;
-+			wakeup-source;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_led_gpio_default>;
-+		status = "okay";
-+
-+		red {
-+			label = "red";
-+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		green {
-+			label = "green";
-+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		blue {
-+			label = "blue";
-+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+};
diff --git a/target/linux/at91/sam9x/config-default b/target/linux/at91/sam9x/config-default
index f53f24e..8cd7330 100644
--- a/target/linux/at91/sam9x/config-default
+++ b/target/linux/at91/sam9x/config-default
@@ -2,21 +2,12 @@
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V4_V5=y
 CONFIG_ARCH_MULTI_V5=y
-# CONFIG_ARM_AT91_CPUIDLE is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_AT91RM9200_WATCHDOG is not set
 CONFIG_ATMEL_AIC_IRQ=y
 CONFIG_ATMEL_ST=y
-CONFIG_AT_XDMAC=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
 # CONFIG_CACHE_L2X0 is not set
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_DEBUGFS=y
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV4T=y
@@ -33,28 +24,39 @@ CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_USE_DOMAINS=y
 CONFIG_CRC7=y
-CONFIG_CRC_CCITT=y
 CONFIG_CRC_ITU_T=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMA_CMA=y
-CONFIG_FB_ATMEL=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_GENERIC_ATOMIC64=y
 # CONFIG_HAVE_ARCH_BITREVERSE is not set
 CONFIG_HZ=128
+# CONFIG_HZ_100 is not set
 CONFIG_HZ_FIXED=128
-# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_POLLDEV=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_MCE_KBD_DECODER=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_SANYO_DECODER=y
+CONFIG_IR_SHARP_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_XMP_DECODER=y
+# CONFIG_LIRC is not set
 CONFIG_MMC_SPI=y
 CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_RFKILL_REGULATOR=y
-CONFIG_RTC_DRV_AT91SAM9=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
+CONFIG_RC_CORE=y
+CONFIG_RC_DECODERS=y
+# CONFIG_RC_DEVICES is not set
+CONFIG_RC_MAP=y
+# CONFIG_REGULATOR_ACT8945A is not set
+# CONFIG_SAMA5D4_WATCHDOG is not set
+CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
+CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_ATMEL_SOC_PDC=y
+CONFIG_SND_ATMEL_SOC_SSC_PDC=y
+CONFIG_SND_SOC_WM8731=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_SOC_SAM_V4_V5=y
 CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_USB_ATMEL_USBA is not set
+CONFIG_VIDEO_IR_I2C=y
diff --git a/target/linux/at91/sama5d2/config-default b/target/linux/at91/sama5d2/config-default
index 43f8d24..29ef738 100644
--- a/target/linux/at91/sama5d2/config-default
+++ b/target/linux/at91/sama5d2/config-default
@@ -1,44 +1,58 @@
 CONFIG_ARCH_MULTI_V6_V7=y
 CONFIG_ARCH_MULTI_V7=y
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_AT_XDMAC=y
-CONFIG_BATTERY_ACT8945A=y
-CONFIG_CAN=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_DEBUGFS=y
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMA_CMA=y
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_MEMCG=y
-CONFIG_MFD_ACT8945A=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_PAGE_COUNTER=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_IDIV=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT91_VDEC_G1=y
+CONFIG_ATMEL_AIC5_IRQ=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_AT91_AUDIO_PLL=y
+CONFIG_HAVE_AT91_GENERATED_CLK=y
+CONFIG_HAVE_AT91_H32MX=y
+CONFIG_HAVE_AT91_I2S_MUX_CLK=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SMP=y
+CONFIG_HZ_FIXED=0
+# CONFIG_INPUT_ATMEL_PTC is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_NEON=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
 CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
-CONFIG_RFKILL_REGULATOR=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_SAMA5D4_WATCHDOG=y
-CONFIG_SND_ATMEL_SOC_CLASSD=y
+# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
+# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
+CONFIG_SOC_SAMA5=y
 CONFIG_SOC_SAMA5D2=y
+CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
+# CONFIG_AT91_VDEC_G1 is not set
 CONFIG_SOC_SAM_V7=y
-CONFIG_SPI_ATMEL_QUADSPI=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_USB_ATMEL_USBA is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_VFPv3=y
diff --git a/target/linux/at91/sama5d3/config-default b/target/linux/at91/sama5d3/config-default
index 88b4031..29ef738 100644
--- a/target/linux/at91/sama5d3/config-default
+++ b/target/linux/at91/sama5d3/config-default
@@ -1,39 +1,58 @@
 CONFIG_ARCH_MULTI_V6_V7=y
 CONFIG_ARCH_MULTI_V7=y
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_AT_XDMAC=y
-CONFIG_BATTERY_ACT8945A=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_DEBUGFS=y
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMA_CMA=y
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_MFD_ACT8945A=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_IDIV=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT91_VDEC_G1=y
+CONFIG_ATMEL_AIC5_IRQ=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_AT91_AUDIO_PLL=y
+CONFIG_HAVE_AT91_GENERATED_CLK=y
+CONFIG_HAVE_AT91_H32MX=y
+CONFIG_HAVE_AT91_I2S_MUX_CLK=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SMP=y
+CONFIG_HZ_FIXED=0
+# CONFIG_INPUT_ATMEL_PTC is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_NEON=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
 CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
-CONFIG_RFKILL_REGULATOR=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_SAMA5D4_WATCHDOG=y
-CONFIG_SND_ATMEL_SOC_CLASSD=y
+# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
+# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
+CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
+# CONFIG_AT91_VDEC_G1 is not set
 CONFIG_SOC_SAM_V7=y
-CONFIG_SPI_ATMEL_QUADSPI=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_USB_ATMEL_USBA is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_VFPv3=y
diff --git a/target/linux/at91/sama5d4/config-default b/target/linux/at91/sama5d4/config-default
index baa2d5f..c3cad47 100644
--- a/target/linux/at91/sama5d4/config-default
+++ b/target/linux/at91/sama5d4/config-default
@@ -1,39 +1,58 @@
 CONFIG_ARCH_MULTI_V6_V7=y
 CONFIG_ARCH_MULTI_V7=y
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_AT_XDMAC=y
-CONFIG_BATTERY_ACT8945A=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_DEBUGFS=y
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMA_CMA=y
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_MFD_ACT8945A=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_IDIV=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT91_VDEC_G1=y
+CONFIG_ATMEL_AIC5_IRQ=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_AT91_AUDIO_PLL=y
+CONFIG_HAVE_AT91_GENERATED_CLK=y
+CONFIG_HAVE_AT91_H32MX=y
+CONFIG_HAVE_AT91_I2S_MUX_CLK=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SMP=y
+CONFIG_HZ_FIXED=0
+# CONFIG_INPUT_ATMEL_PTC is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_NEON=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
 CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
-CONFIG_RFKILL_REGULATOR=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_SAMA5D4_WATCHDOG=y
-CONFIG_SND_ATMEL_SOC_CLASSD=y
+# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
+# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
+CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5D2=y
+CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
+CONFIG_AT91_VDEC_G1=y
 CONFIG_SOC_SAM_V7=y
-CONFIG_SPI_ATMEL_QUADSPI=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_USB_ATMEL_USBA is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_VFPv3=y
