diff mbox series

[v2] bmips: add NAND devices from bcm63xx

Message ID 3199616.gAJloMhRER@tool
State Deferred, archived
Headers show
Series [v2] bmips: add NAND devices from bcm63xx | expand

Commit Message

Daniel González Cabanelas March 3, 2021, 2 p.m. UTC 
Add NAND based devices from the bcm63xx target:
 - Sercomm AD1018 v1 / v2
 - Sercomm H500-s lowi
 - Sercomm H500-s vfes
 - Comtrend VG-8050
 - Huawei HG253s v2

They're all already supported, just adapt them for the new WiP bmips
target.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
---
Changes in v2:
 - Added missing USB nodes for H500-s, deleted unused NAND property
 - Commit log changed

 .../dts/bcm63167-sercomm-h500-s-lowi.dts      |  13 +
 .../dts/bcm63167-sercomm-h500-s-vfes.dts      |  13 +
 .../bmips/dts/bcm63167-sercomm-h500-s.dtsi    | 204 ++++++++++++++++
 .../bmips/dts/bcm63169-comtrend-vg-8050.dts   | 149 ++++++++++++
 .../bmips/dts/bcm6328-sercomm-ad1018-v1.dts   |  13 +
 .../bmips/dts/bcm6328-sercomm-ad1018-v2.dts   |  13 +
 .../bmips/dts/bcm6328-sercomm-ad1018.dtsi     | 222 ++++++++++++++++++
 .../bmips/dts/bcm6362-huawei-hg253s-v2.dts    | 141 +++++++++++
 target/linux/bmips/image/bcm63xx_nand.mk      | 132 ++++++++++-
 9 files changed, 899 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
 create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
 create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
 create mode 100644 target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
 create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
 create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
 create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
 create mode 100644 target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts

Comments

Adrian Schmutzler March 5, 2021, 7:18 p.m. UTC | #1 
Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org]
> On Behalf Of Daniel González Cabanelas
> Sent: Mittwoch, 3. März 2021 15:01
> To: openwrt-devel@lists.openwrt.org
> Cc: noltari@gmail.com
> Subject: [PATCH v2] bmips: add NAND devices from bcm63xx
> 
> Add NAND based devices from the bcm63xx target:
>  - Sercomm AD1018 v1 / v2
>  - Sercomm H500-s lowi
>  - Sercomm H500-s vfes
>  - Comtrend VG-8050
>  - Huawei HG253s v2
> 
> They're all already supported, just adapt them for the new WiP bmips target.

base-files are missing.

If we add devices to this target (after the initial one-target-per-board starters), I think we should make sure they are fully supported.
Otherwise, we risk having to look at everything twice, and will forget some in the middle.

Weren't some drivers missing as well?

Best

Adrian

> 
> Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
> ---
> Changes in v2:
>  - Added missing USB nodes for H500-s, deleted unused NAND property
>  - Commit log changed
> 
>  .../dts/bcm63167-sercomm-h500-s-lowi.dts      |  13 +
>  .../dts/bcm63167-sercomm-h500-s-vfes.dts      |  13 +
>  .../bmips/dts/bcm63167-sercomm-h500-s.dtsi    | 204 ++++++++++++++++
>  .../bmips/dts/bcm63169-comtrend-vg-8050.dts   | 149 ++++++++++++
>  .../bmips/dts/bcm6328-sercomm-ad1018-v1.dts   |  13 +
>  .../bmips/dts/bcm6328-sercomm-ad1018-v2.dts   |  13 +
>  .../bmips/dts/bcm6328-sercomm-ad1018.dtsi     | 222
> ++++++++++++++++++
>  .../bmips/dts/bcm6362-huawei-hg253s-v2.dts    | 141 +++++++++++
>  target/linux/bmips/image/bcm63xx_nand.mk      | 132 ++++++++++-
>  9 files changed, 899 insertions(+), 1 deletion(-)  create mode 100644
> target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
>  create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s-
> vfes.dts
>  create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
>  create mode 100644 target/linux/bmips/dts/bcm63169-comtrend-vg-
> 8050.dts
>  create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018-
> v1.dts
>  create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018-
> v2.dts
>  create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
>  create mode 100644 target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> 
> diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> new file mode 100644
> index 0000000000..90aa9e1c15
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Device Tree file for Sercomm H500-s lowi
> + *
> + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>  */
> +
> +#include "bcm63167-sercomm-h500-s.dtsi"
> +
> +/ {
> +	model = "Sercomm H500-s lowi";
> +	compatible = "sercomm,h500-s-lowi", "brcm,bcm63167",
> "brcm,bcm63268";
> +};
> diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
> b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
> new file mode 100644
> index 0000000000..bd69ccd316
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Device Tree file for Sercomm H500-s vfes
> + *
> + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>  */
> +
> +#include "bcm63167-sercomm-h500-s.dtsi"
> +
> +/ {
> +	model = "Sercomm H500-s vfes";
> +	compatible = "sercomm,h500-s-vfes", "brcm,bcm63167",
> "brcm,bcm63268";
> +};
> diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> b/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> new file mode 100644
> index 0000000000..f9fe6fe40c
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> @@ -0,0 +1,204 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Device Tree file for Sercomm H500-s
> + *
> + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>  */
> +
> +#include "bcm63268.dtsi"
> +
> +/ {
> +	aliases {
> +		led-boot = &led_power_green;
> +		led-failsafe = &led_power_red;
> +		led-running = &led_power_green;
> +		led-upgrade = &led_power_green;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x08000000>; /* 128 MiB */
> +	};
> +
> +	keys {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <20>;
> +
> +		wps {
> +			label = "wps";
> +			gpios = <&pinctrl 34 1>;
> +			linux,code = <KEY_WPS_BUTTON>;
> +			debounce-interval = <60>;
> +		};
> +
> +		reset {
> +			label = "reset";
> +			gpios = <&pinctrl 35 1>;
> +			linux,code = <KEY_RESTART>;
> +			debounce-interval = <60>;
> +		};
> +	};
> +};
> +
> +&ehci {
> +	status = "okay";
> +};
> +
> +&ohci {
> +	status = "okay";
> +};
> +
> +&usbh {
> +	status = "okay";
> +};
> +
> +&leds {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_leds>;
> +
> +	mobile_red {
> +		reg = <0>;
> +		label = "red:mobile";
> +	};
> +
> +	mobile_green {
> +		reg = <1>;
> +		label = "green:mobile";
> +	};
> +
> +	led_power_red: power_red {
> +		reg = <8>;
> +		label = "red:power";
> +	};
> +
> +	wifi_green {
> +		reg = <9>;
> +		label = "green:wifi";
> +	};
> +
> +	phone_red {
> +		reg = <12>;
> +		label = "red:phone";
> +	};
> +
> +	wifi_red {
> +		reg = <13>;
> +		label = "red:wifi";
> +	};
> +
> +	internet_red {
> +		reg = <14>;
> +		label = "red:internet";
> +	};
> +
> +	internet_green {
> +		reg = <15>;
> +		label = "green:internet";
> +	};
> +
> +	phone_green {
> +		reg = <16>;
> +		label = "green:phone";
> +	};
> +
> +	led_power_green: power_green {
> +		reg = <17>;
> +		label = "green:power";
> +		default-state = "on";
> +	};
> +
> +	mobile_blue {
> +		reg = <23>;
> +		label = "blue:mobile";
> +	};
> +};
> +
> +&nflash {
> +	status = "okay";
> +
> +	nandcs@0 {
> +		compatible = "brcm,nandcs";
> +		#size-cells = <1>;
> +		#address-cells = <1>;
> +		reg = <0>;
> +		nand-ecc-step-size = <512>;
> +		nand-ecc-strength = <4>;
> +		nand-on-flash-bbt;
> +		brcm,nand-oob-sector-size = <64>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@0 {
> +				label = "cferom";
> +				reg = <0x0000000 0x0020000>;
> +				read-only;
> +			};
> +
> +			partition@20000 {
> +				label = "part_map";
> +				reg = <0x0020000 0x00a0000>;
> +				read-only;
> +			};
> +
> +			partition@c0000 {
> +				label = "cferam1";
> +				reg = <0x00c0000 0x0140000>;
> +				read-only;
> +			};
> +
> +			partition@200000 {
> +				label = "cferam2";
> +				reg = <0x0200000 0x0140000>;
> +				read-only;
> +			};
> +
> +			partition@6920000 {
> +				label = "bootflag1";
> +				reg = <0x6920000 0x0140000>;
> +			};
> +
> +			partition@6a60000 {
> +				label = "bootflag2";
> +				reg = <0x6a60000 0x0140000>;
> +			};
> +
> +			partition@520000 {
> +				compatible = "sercomm,wfi";
> +				label = "wfi";
> +				reg = <0x0520000 0x6400000>; /* 2 images,
> 97152 KiB */
> +			};
> +
> +			partition@6ba0000 {
> +				label = "xml_cfg";
> +				reg = <0x6ba0000 0x0280000>;
> +				read-only;
> +			};
> +
> +			partition@6e20000 {
> +				label = "app_data";
> +				reg = <0x6e20000 0x0280000>;
> +				read-only;
> +			};
> +		};
> +	};
> +};
> +
> +&pinctrl {
> +	pinctrl_leds: leds {
> +		function = "led";
> +		pins = "gpio0",  "gpio1",  "gpio8",  "gpio9",
> +		       "gpio12", "gpio13", "gpio14", "gpio15",
> +		       "gpio16", "gpio17", "gpio23";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
> b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
> new file mode 100644
> index 0000000000..481674f6a2
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
> @@ -0,0 +1,149 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "bcm63268.dtsi"
> +
> +/ {
> +	model = "Comtrend VG-8050";
> +	compatible = "comtrend,vg-8050", "brcm,bcm63169",
> "brcm,bcm63268";
> +
> +	aliases {
> +		led-boot = &led_power_green;
> +		led-failsafe = &led_power_green;
> +		led-running = &led_power_green;
> +		led-upgrade = &led_power_green;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x08000000>; /* 128 MiB */
> +	};
> +
> +	keys {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <20>;
> +
> +		reset {
> +			label = "reset";
> +			gpios = <&pinctrl 33 1>;
> +			linux,code = <KEY_RESTART>;
> +			debounce-interval = <60>;
> +		};
> +
> +		wps {
> +			label = "wps";
> +			gpios = <&pinctrl 34 1>;
> +			linux,code = <KEY_WPS_BUTTON>;
> +			debounce-interval = <60>;
> +		};
> +	};
> +};
> +
> +&ehci {
> +	status = "okay";
> +};
> +
> +&ohci {
> +	status = "okay";
> +};
> +
> +&usbh {
> +	status = "okay";
> +};
> +
> +&leds {
> +	status = "okay";
> +	brcm,serial-leds;
> +	brcm,serial-dat-low;
> +	brcm,serial-shift-inv;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_serial_led>;
> +
> +	led@2 {
> +		reg = <2>;
> +		active-low;
> +		label = "red:internet";
> +	};
> +
> +	led@3 {
> +		reg = <3>;
> +		active-low;
> +		label = "red:power";
> +	};
> +
> +	led_power_green: led@6 {
> +		reg = <6>;
> +		active-low;
> +		label = "green:power";
> +		default-state = "on";
> +	};
> +
> +	led@7 {
> +		reg = <7>;
> +		active-low;
> +		label = "green:wps";
> +	};
> +
> +	led@8 {
> +		reg = <8>;
> +		active-low;
> +		label = "green:internet";
> +	};
> +
> +	led@10 {
> +		reg = <10>;
> +		active-low;
> +		label = "green:voip";
> +	};
> +
> +	led@12 {
> +		reg = <12>;
> +		active-low;
> +		label = "red:voip";
> +	};
> +
> +	led@14 {
> +		reg = <14>;
> +		active-low;
> +		label = "red:wps";
> +	};
> +};
> +
> +&nflash {
> +	status = "okay";
> +
> +	nandcs@0 {
> +		compatible = "brcm,nandcs";
> +		#size-cells = <1>;
> +		#address-cells = <1>;
> +		reg = <0>;
> +		nand-ecc-step-size = <512>;
> +		nand-ecc-strength = <15>;
> +		nand-on-flash-bbt;
> +		brcm,nand-oob-sector-size = <64>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@0 {
> +				label = "cferom";
> +				reg = <0x0000000 0x0020000>;
> +				read-only;
> +			};
> +
> +			partition@20000 {
> +				compatible = "brcm,wfi-split";
> +				label = "wfi";
> +				reg = <0x0020000 0x7ac0000>;
> +			};
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
> b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
> new file mode 100644
> index 0000000000..5700b3b692
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "bcm6328-sercomm-ad1018.dtsi"
> +
> +/ {
> +	model = "Sercomm AD1018 v1";
> +	compatible = "sercomm,ad1018", "brcm,bcm6328";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x04000000>; /* 64 MiB */
> +	};
> +};
> diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
> b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
> new file mode 100644
> index 0000000000..11150af187
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "bcm6328-sercomm-ad1018.dtsi"
> +
> +/ {
> +	model = "Sercomm AD1018 v2";
> +	compatible = "sercomm,ad1018", "brcm,bcm6328";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x08000000>; /* 128 MiB */
> +	};
> +};
> diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> new file mode 100644
> index 0000000000..aeaeb74538
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> @@ -0,0 +1,222 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "bcm6328.dtsi"
> +
> +/ {
> +	aliases {
> +		led-boot = &led_power_green;
> +		led-failsafe = &led_power_green;
> +		led-running = &led_power_green;
> +		led-upgrade = &led_power_green;
> +	};
> +
> +	keys {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <20>;
> +
> +		wps {
> +			label = "wps";
> +			gpios = <&pinctrl 24 1>;
> +			linux,code = <KEY_WPS_BUTTON>;
> +			debounce-interval = <60>;
> +		};
> +
> +		wifi {
> +			label = "wifi";
> +			gpios = <&pinctrl 25 1>;
> +			linux,code = <KEY_WLAN>;
> +			debounce-interval = <60>;
> +		};
> +
> +		reset {
> +			label = "reset";
> +			gpios = <&pinctrl 31 1>;
> +			linux,code = <KEY_RESTART>;
> +			debounce-interval = <60>;
> +		};
> +	};
> +};
> +
> +&ehci {
> +	status = "okay";
> +};
> +
> +&ohci {
> +	status = "okay";
> +};
> +
> +&usbh {
> +	status = "okay";
> +};
> +
> +&leds {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
> +		     &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
> +		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
> +
> +	brcm,serial-leds;
> +	brcm,serial-shift-inv;
> +	brcm,serial-dat-low;
> +
> +	led@0 {
> +		reg = <0>;
> +		active-low;
> +		label = "red:internet";
> +	};
> +
> +	led@1 {
> +		reg = <1>;
> +		active-low;
> +		label = "green:internet";
> +	};
> +
> +	led_power_green: led@8 {
> +		reg = <8>;
> +		active-low;
> +		label = "green:power";
> +		default-state = "on";
> +	};
> +
> +	led@10 {
> +		reg = <10>;
> +		active-low;
> +		label = "green:adsl";
> +	};
> +
> +	led@11 {
> +		reg = <11>;
> +		active-low;
> +		label = "red:adsl";
> +	};
> +
> +	led@12 {
> +		reg = <12>;
> +		active-low;
> +		label = "green:phone";
> +	};
> +
> +	led@13 {
> +		reg = <13>;
> +		active-low;
> +		label = "green:wps";
> +	};
> +
> +	led@14 {
> +		reg = <14>;
> +		active-low;
> +		label = "green:wifi";
> +	};
> +
> +	led@15 {
> +		reg = <15>;
> +		active-low;
> +		label = "green:usb";
> +	};
> +
> +	led@17 {
> +		/* EPHY0 Spd */
> +		reg = <17>;
> +		brcm,hardware-controlled;
> +	};
> +};
> +
> +&nflash {
> +	status = "okay";
> +
> +	nandcs@0 {
> +		compatible = "brcm,nandcs";
> +		#size-cells = <1>;
> +		#address-cells = <1>;
> +		reg = <0>;
> +		nand-ecc-step-size = <512>;
> +		nand-ecc-strength = <15>;
> +		nand-on-flash-bbt;
> +		brcm,nand-oob-sector-size = <64>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@0 {
> +				label = "cferom";
> +				reg = <0x0000000 0x0020000>;
> +				read-only;
> +			};
> +
> +			partition@20000 {
> +				label = "mmap";
> +				reg = <0x0020000 0x00a0000>;
> +				read-only;
> +			};
> +
> +			partition@c0000 {
> +				label = "cferam1";
> +				reg = <0x00c0000 0x0140000>;
> +				read-only;
> +			};
> +
> +			partition@200000 {
> +				label = "cferam2";
> +				reg = <0x0200000 0x0140000>;
> +				read-only;
> +			};
> +
> +			partition@340000 {
> +				label = "serial";
> +				reg = <0x0340000 0x00a0000>;
> +				read-only;
> +			};
> +
> +			partition@3e0000 {
> +				label = "protect";
> +				reg = <0x03e0000 0x0140000>;
> +				read-only;
> +			};
> +
> +			partition@6920000 {
> +				label = "bootflag1";
> +				reg = <0x6920000 0x0140000>;
> +			};
> +
> +			partition@6a60000 {
> +				label = "bootflag2";
> +				reg = <0x6a60000 0x0140000>;
> +			};
> +
> +			partition@520000 {
> +				compatible = "sercomm,wfi";
> +				label = "wfi";
> +				reg = <0x0520000 0x6400000>;
> +			};
> +
> +			partition@6ba0000 {
> +				label = "xml_cfg";
> +				reg = <0x6ba0000 0x0280000>;
> +				read-only;
> +			};
> +
> +			partition@6e20000 {
> +				label = "app_dat";
> +				reg = <0x6e20000 0x0280000>;
> +				read-only;
> +			};
> +		};
> +	};
> +};
> +
> +&pinctrl {
> +	pinctrl_leds: leds {
> +		function = "led";
> +		pins = "gpio0", "gpio1";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> b/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> new file mode 100644
> index 0000000000..eaf83ecc88
> --- /dev/null
> +++ b/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include "bcm6362.dtsi"
> +
> +/ {
> +	model = "Huawei HG253s v2";
> +	compatible = "huawei,hg253s-v2", "brcm,bcm6362";
> +
> +	aliases {
> +		led-boot = &led_phone_green;
> +		led-failsafe = &led_phone_green;
> +		led-upgrade = &led_phone_green;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x08000000>; /* 128 MiB */
> +	};
> +
> +	keys {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <20>;
> +
> +		reset {
> +			label = "reset";
> +			gpios = <&pinctrl 24 1>;
> +			linux,code = <KEY_RESTART>;
> +			debounce-interval = <60>;
> +		};
> +
> +		wlan {
> +			label = "wlan";
> +			gpios = <&pinctrl 25 1>;
> +			linux,code = <KEY_WLAN>;
> +			debounce-interval = <60>;
> +		};
> +
> +		wps {
> +			label = "wps";
> +			gpios = <&pinctrl 26 1>;
> +			linux,code = <KEY_WPS_BUTTON>;
> +			debounce-interval = <60>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led_phone_green: led@28 {
> +			label = "green:phone";
> +			gpios = <&pinctrl 28 1>;
> +		};
> +
> +		led@30 {
> +			label = "green:usb";
> +			gpios = <&pinctrl 30 1>;
> +		};
> +	};
> +};
> +
> +&ehci {
> +	status = "okay";
> +};
> +
> +&ohci {
> +	status = "okay";
> +};
> +
> +&usbh {
> +	status = "okay";
> +};
> +
> +&leds {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_leds>;
> +
> +	led@3 {
> +		reg = <3>;
> +		active-low;
> +		label = "green:internet";
> +	};
> +
> +	led@5 {
> +		reg = <5>;
> +		active-low;
> +		label = "green:wifi";
> +	};
> +};
> +
> +&nflash {
> +	status = "okay";
> +
> +	nandcs@0 {
> +		compatible = "brcm,nandcs";
> +		#size-cells = <1>;
> +		#address-cells = <1>;
> +		reg = <0>;
> +		nand-ecc-step-size = <512>;
> +		nand-ecc-strength = <15>;
> +		nand-on-flash-bbt;
> +		brcm,nand-oob-sector-size = <64>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@0 {
> +				label = "cferom";
> +				reg = <0x0000000 0x0020000>;
> +				read-only;
> +			};
> +
> +			partition@20000 {
> +				compatible = "brcm,wfi";
> +				label = "wfi";
> +				reg = <0x0020000 0x7d80000>;
> +			};
> +
> +			partition@7da0000 {
> +				label = "nvram";
> +				reg = <0x7da0000 0x160000>;
> +			};
> +		};
> +	};
> +};
> +
> +&pinctrl {
> +	pinctrl_leds: leds {
> +		function = "led";
> +		pins = "gpio3", "gpio5";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/target/linux/bmips/image/bcm63xx_nand.mk
> b/target/linux/bmips/image/bcm63xx_nand.mk
> index a712cd0699..6c63a58640 100644
> --- a/target/linux/bmips/image/bcm63xx_nand.mk
> +++ b/target/linux/bmips/image/bcm63xx_nand.mk
> @@ -41,10 +41,28 @@ define Device/sercomm-nand
>    IMAGES := factory.img sysupgrade.bin
>    IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) |
> append-ubi |\
>      cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
> -  SERCOM_PID :=
> +  SERCOMM_PID :=
>    SERCOMM_VERSION :=
>  endef
> 
> +define Device/comtrend_vg-8050
> +  $(Device/bcm63xx-nand)
> +  DEVICE_VENDOR := Comtrend
> +  DEVICE_MODEL := VG-8050
> +  CHIP_ID := 63268
> +  SOC := bcm63169
> +  CFE_RAM_FILE := comtrend,vg-8050/cferam.000
> +  CFE_RAM_JFFS2_NAME := cferam.000
> +  BLOCKSIZE := 128k
> +  PAGESIZE := 2048
> +  SUBPAGESIZE := 512
> +  VID_HDR_OFFSET := 2048
> +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> +  CFE_WFI_VERSION := 0x5732
> +  CFE_WFI_FLASH_TYPE := 3
> +endef
> +TARGET_DEVICES += comtrend_vg-8050
> +
>  define Device/comtrend_vr-3032u
>    $(Device/bcm63xx-nand)
>    DEVICE_VENDOR := Comtrend
> @@ -63,6 +81,27 @@ define Device/comtrend_vr-3032u  endef
> TARGET_DEVICES += comtrend_vr-3032u
> 
> +define Device/huawei_hg253s-v2
> +  $(Device/bcm63xx-nand)
> +  IMAGES := flash.bin sysupgrade.bin
> +  IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |
> +cfe-jffs2-cferam | append-ubi
> +  DEVICE_VENDOR := Huawei
> +  DEVICE_MODEL := HG253s
> +  DEVICE_VARIANT := v2
> +  CHIP_ID := 6362
> +  CFE_PART_FLAGS := 1
> +  CFE_PART_ID := 0x0001EFEE
> +  CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
> +  CFE_RAM_JFFS2_NAME := cferam.000
> +  BLOCKSIZE := 128k
> +  PAGESIZE := 2048
> +  SUBPAGESIZE := 512
> +  VID_HDR_OFFSET := 2048
> +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> +  CFE_WFI_FLASH_TYPE := 3
> +endef
> +TARGET_DEVICES += huawei_hg253s-v2
> +
>  define Device/netgear_dgnd3700-v2
>    $(Device/bcm63xx-nand)
>    DEVICE_VENDOR := NETGEAR
> @@ -79,3 +118,94 @@ define Device/netgear_dgnd3700-v2
>    CFE_WFI_VERSION := 0x5731
>  endef
>  TARGET_DEVICES += netgear_dgnd3700-v2
> +
> +define Device/sercomm_ad1018_v1
> +  $(Device/sercomm-nand)
> +  DEVICE_VENDOR := Sercomm
> +  DEVICE_MODEL := AD1018
> +  DEVICE_VARIANT := v1
> +  CHIP_ID := 6328
> +  CFE_RAM_FILE := sercomm,ad1018/cferam
> +  CFE_RAM_JFFS2_NAME := cferam
> +  BLOCKSIZE := 128k
> +  PAGESIZE := 2048
> +  SUBPAGESIZE := 512
> +  VID_HDR_OFFSET := 2048
> +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> +  CFE_WFI_FLASH_TYPE := 3
> +  CFE_WFI_VERSION := 0x5731
> +  SERCOMM_PID := \
> +    30 30 30 30 30 30 30 31 34 31 35 31 35 33 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 33 30 31 33 30 30 30 30 30 30 30 30 \
> +    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +  SERCOMM_VERSION := 1001
> +endef
> +TARGET_DEVICES += sercomm_ad1018_v1
> +
> +define Device/sercomm_ad1018_v2
> +  $(Device/sercomm-nand)
> +  $(Device/sercomm_ad1018_v1)
> +  DEVICE_VENDOR := Sercomm
> +  DEVICE_MODEL := AD1018
> +  DEVICE_VARIANT := v2
> +endef
> +TARGET_DEVICES += sercomm_ad1018_v2
> +
> +define Device/sercomm_h500-s-lowi
> +  $(Device/sercomm-nand)
> +  DEVICE_VENDOR := Sercomm
> +  DEVICE_MODEL := H500-s
> +  DEVICE_VARIANT := lowi
> +  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
> +  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
> +  CHIP_ID := 63268
> +  SOC := bcm63167
> +  BLOCKSIZE := 128k
> +  PAGESIZE := 2048
> +  SUBPAGESIZE := 512
> +  VID_HDR_OFFSET := 2048
> +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> +  SERCOMM_PID := \
> +    30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
> +    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +  SERCOMM_VERSION := 1001
> +endef
> +TARGET_DEVICES += sercomm_h500-s-lowi
> +
> +define Device/sercomm_h500-s-vfes
> +  $(Device/sercomm-nand)
> +  DEVICE_VENDOR := Sercomm
> +  DEVICE_MODEL := H500-s
> +  DEVICE_VARIANT := vfes
> +  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
> +  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
> +  CHIP_ID := 63268
> +  SOC := bcm63167
> +  BLOCKSIZE := 128k
> +  PAGESIZE := 2048
> +  SUBPAGESIZE := 512
> +  VID_HDR_OFFSET := 2048
> +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> +  SERCOMM_PID := \
> +    30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> +    30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
> +    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> +  SERCOMM_VERSION := 1001
> +endef
> +TARGET_DEVICES += sercomm_h500-s-vfes
> --
> 2.30.1
> 
> 
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Daniel González Cabanelas March 5, 2021, 8:10 p.m. UTC | #2 
El vie, 5 mar 2021 a las 20:18, Adrian Schmutzler
(<mail@adrianschmutzler.de>) escribió:
>
> Hi,
>
> > -----Original Message-----
> > From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org]
> > On Behalf Of Daniel González Cabanelas
> > Sent: Mittwoch, 3. März 2021 15:01
> > To: openwrt-devel@lists.openwrt.org
> > Cc: noltari@gmail.com
> > Subject: [PATCH v2] bmips: add NAND devices from bcm63xx
> >
> > Add NAND based devices from the bcm63xx target:
> >  - Sercomm AD1018 v1 / v2
> >  - Sercomm H500-s lowi
> >  - Sercomm H500-s vfes
> >  - Comtrend VG-8050
> >  - Huawei HG253s v2
> >
> > They're all already supported, just adapt them for the new WiP bmips target.
>
> base-files are missing.
>
> If we add devices to this target (after the initial one-target-per-board starters), I think we should make sure they are fully supported.
> Otherwise, we risk having to look at everything twice, and will forget some in the middle.
>
I agree, I already archived the patch.

> Weren't some drivers missing as well?
>
Yes, ethernet and PCI.

Regards.

> Best
>
> Adrian
>
> >
> > Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
> > ---
> > Changes in v2:
> >  - Added missing USB nodes for H500-s, deleted unused NAND property
> >  - Commit log changed
> >
> >  .../dts/bcm63167-sercomm-h500-s-lowi.dts      |  13 +
> >  .../dts/bcm63167-sercomm-h500-s-vfes.dts      |  13 +
> >  .../bmips/dts/bcm63167-sercomm-h500-s.dtsi    | 204 ++++++++++++++++
> >  .../bmips/dts/bcm63169-comtrend-vg-8050.dts   | 149 ++++++++++++
> >  .../bmips/dts/bcm6328-sercomm-ad1018-v1.dts   |  13 +
> >  .../bmips/dts/bcm6328-sercomm-ad1018-v2.dts   |  13 +
> >  .../bmips/dts/bcm6328-sercomm-ad1018.dtsi     | 222
> > ++++++++++++++++++
> >  .../bmips/dts/bcm6362-huawei-hg253s-v2.dts    | 141 +++++++++++
> >  target/linux/bmips/image/bcm63xx_nand.mk      | 132 ++++++++++-
> >  9 files changed, 899 insertions(+), 1 deletion(-)  create mode 100644
> > target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> >  create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s-
> > vfes.dts
> >  create mode 100644 target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> >  create mode 100644 target/linux/bmips/dts/bcm63169-comtrend-vg-
> > 8050.dts
> >  create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018-
> > v1.dts
> >  create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018-
> > v2.dts
> >  create mode 100644 target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> >  create mode 100644 target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> >
> > diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> > b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> > new file mode 100644
> > index 0000000000..90aa9e1c15
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
> > @@ -0,0 +1,13 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> > +/*
> > + * Device Tree file for Sercomm H500-s lowi
> > + *
> > + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>  */
> > +
> > +#include "bcm63167-sercomm-h500-s.dtsi"
> > +
> > +/ {
> > +     model = "Sercomm H500-s lowi";
> > +     compatible = "sercomm,h500-s-lowi", "brcm,bcm63167",
> > "brcm,bcm63268";
> > +};
> > diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
> > b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
> > new file mode 100644
> > index 0000000000..bd69ccd316
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
> > @@ -0,0 +1,13 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> > +/*
> > + * Device Tree file for Sercomm H500-s vfes
> > + *
> > + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>  */
> > +
> > +#include "bcm63167-sercomm-h500-s.dtsi"
> > +
> > +/ {
> > +     model = "Sercomm H500-s vfes";
> > +     compatible = "sercomm,h500-s-vfes", "brcm,bcm63167",
> > "brcm,bcm63268";
> > +};
> > diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> > b/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> > new file mode 100644
> > index 0000000000..f9fe6fe40c
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
> > @@ -0,0 +1,204 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> > +/*
> > + * Device Tree file for Sercomm H500-s
> > + *
> > + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>  */
> > +
> > +#include "bcm63268.dtsi"
> > +
> > +/ {
> > +     aliases {
> > +             led-boot = &led_power_green;
> > +             led-failsafe = &led_power_red;
> > +             led-running = &led_power_green;
> > +             led-upgrade = &led_power_green;
> > +     };
> > +
> > +     memory@0 {
> > +             device_type = "memory";
> > +             reg = <0x00000000 0x08000000>; /* 128 MiB */
> > +     };
> > +
> > +     keys {
> > +             compatible = "gpio-keys-polled";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             poll-interval = <20>;
> > +
> > +             wps {
> > +                     label = "wps";
> > +                     gpios = <&pinctrl 34 1>;
> > +                     linux,code = <KEY_WPS_BUTTON>;
> > +                     debounce-interval = <60>;
> > +             };
> > +
> > +             reset {
> > +                     label = "reset";
> > +                     gpios = <&pinctrl 35 1>;
> > +                     linux,code = <KEY_RESTART>;
> > +                     debounce-interval = <60>;
> > +             };
> > +     };
> > +};
> > +
> > +&ehci {
> > +     status = "okay";
> > +};
> > +
> > +&ohci {
> > +     status = "okay";
> > +};
> > +
> > +&usbh {
> > +     status = "okay";
> > +};
> > +
> > +&leds {
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_leds>;
> > +
> > +     mobile_red {
> > +             reg = <0>;
> > +             label = "red:mobile";
> > +     };
> > +
> > +     mobile_green {
> > +             reg = <1>;
> > +             label = "green:mobile";
> > +     };
> > +
> > +     led_power_red: power_red {
> > +             reg = <8>;
> > +             label = "red:power";
> > +     };
> > +
> > +     wifi_green {
> > +             reg = <9>;
> > +             label = "green:wifi";
> > +     };
> > +
> > +     phone_red {
> > +             reg = <12>;
> > +             label = "red:phone";
> > +     };
> > +
> > +     wifi_red {
> > +             reg = <13>;
> > +             label = "red:wifi";
> > +     };
> > +
> > +     internet_red {
> > +             reg = <14>;
> > +             label = "red:internet";
> > +     };
> > +
> > +     internet_green {
> > +             reg = <15>;
> > +             label = "green:internet";
> > +     };
> > +
> > +     phone_green {
> > +             reg = <16>;
> > +             label = "green:phone";
> > +     };
> > +
> > +     led_power_green: power_green {
> > +             reg = <17>;
> > +             label = "green:power";
> > +             default-state = "on";
> > +     };
> > +
> > +     mobile_blue {
> > +             reg = <23>;
> > +             label = "blue:mobile";
> > +     };
> > +};
> > +
> > +&nflash {
> > +     status = "okay";
> > +
> > +     nandcs@0 {
> > +             compatible = "brcm,nandcs";
> > +             #size-cells = <1>;
> > +             #address-cells = <1>;
> > +             reg = <0>;
> > +             nand-ecc-step-size = <512>;
> > +             nand-ecc-strength = <4>;
> > +             nand-on-flash-bbt;
> > +             brcm,nand-oob-sector-size = <64>;
> > +
> > +             partitions {
> > +                     compatible = "fixed-partitions";
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +
> > +                     partition@0 {
> > +                             label = "cferom";
> > +                             reg = <0x0000000 0x0020000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@20000 {
> > +                             label = "part_map";
> > +                             reg = <0x0020000 0x00a0000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@c0000 {
> > +                             label = "cferam1";
> > +                             reg = <0x00c0000 0x0140000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@200000 {
> > +                             label = "cferam2";
> > +                             reg = <0x0200000 0x0140000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@6920000 {
> > +                             label = "bootflag1";
> > +                             reg = <0x6920000 0x0140000>;
> > +                     };
> > +
> > +                     partition@6a60000 {
> > +                             label = "bootflag2";
> > +                             reg = <0x6a60000 0x0140000>;
> > +                     };
> > +
> > +                     partition@520000 {
> > +                             compatible = "sercomm,wfi";
> > +                             label = "wfi";
> > +                             reg = <0x0520000 0x6400000>; /* 2 images,
> > 97152 KiB */
> > +                     };
> > +
> > +                     partition@6ba0000 {
> > +                             label = "xml_cfg";
> > +                             reg = <0x6ba0000 0x0280000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@6e20000 {
> > +                             label = "app_data";
> > +                             reg = <0x6e20000 0x0280000>;
> > +                             read-only;
> > +                     };
> > +             };
> > +     };
> > +};
> > +
> > +&pinctrl {
> > +     pinctrl_leds: leds {
> > +             function = "led";
> > +             pins = "gpio0",  "gpio1",  "gpio8",  "gpio9",
> > +                    "gpio12", "gpio13", "gpio14", "gpio15",
> > +                    "gpio16", "gpio17", "gpio23";
> > +     };
> > +};
> > +
> > +&uart0 {
> > +     status = "okay";
> > +};
> > diff --git a/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
> > b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
> > new file mode 100644
> > index 0000000000..481674f6a2
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
> > @@ -0,0 +1,149 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include "bcm63268.dtsi"
> > +
> > +/ {
> > +     model = "Comtrend VG-8050";
> > +     compatible = "comtrend,vg-8050", "brcm,bcm63169",
> > "brcm,bcm63268";
> > +
> > +     aliases {
> > +             led-boot = &led_power_green;
> > +             led-failsafe = &led_power_green;
> > +             led-running = &led_power_green;
> > +             led-upgrade = &led_power_green;
> > +     };
> > +
> > +     memory@0 {
> > +             device_type = "memory";
> > +             reg = <0x00000000 0x08000000>; /* 128 MiB */
> > +     };
> > +
> > +     keys {
> > +             compatible = "gpio-keys-polled";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             poll-interval = <20>;
> > +
> > +             reset {
> > +                     label = "reset";
> > +                     gpios = <&pinctrl 33 1>;
> > +                     linux,code = <KEY_RESTART>;
> > +                     debounce-interval = <60>;
> > +             };
> > +
> > +             wps {
> > +                     label = "wps";
> > +                     gpios = <&pinctrl 34 1>;
> > +                     linux,code = <KEY_WPS_BUTTON>;
> > +                     debounce-interval = <60>;
> > +             };
> > +     };
> > +};
> > +
> > +&ehci {
> > +     status = "okay";
> > +};
> > +
> > +&ohci {
> > +     status = "okay";
> > +};
> > +
> > +&usbh {
> > +     status = "okay";
> > +};
> > +
> > +&leds {
> > +     status = "okay";
> > +     brcm,serial-leds;
> > +     brcm,serial-dat-low;
> > +     brcm,serial-shift-inv;
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_serial_led>;
> > +
> > +     led@2 {
> > +             reg = <2>;
> > +             active-low;
> > +             label = "red:internet";
> > +     };
> > +
> > +     led@3 {
> > +             reg = <3>;
> > +             active-low;
> > +             label = "red:power";
> > +     };
> > +
> > +     led_power_green: led@6 {
> > +             reg = <6>;
> > +             active-low;
> > +             label = "green:power";
> > +             default-state = "on";
> > +     };
> > +
> > +     led@7 {
> > +             reg = <7>;
> > +             active-low;
> > +             label = "green:wps";
> > +     };
> > +
> > +     led@8 {
> > +             reg = <8>;
> > +             active-low;
> > +             label = "green:internet";
> > +     };
> > +
> > +     led@10 {
> > +             reg = <10>;
> > +             active-low;
> > +             label = "green:voip";
> > +     };
> > +
> > +     led@12 {
> > +             reg = <12>;
> > +             active-low;
> > +             label = "red:voip";
> > +     };
> > +
> > +     led@14 {
> > +             reg = <14>;
> > +             active-low;
> > +             label = "red:wps";
> > +     };
> > +};
> > +
> > +&nflash {
> > +     status = "okay";
> > +
> > +     nandcs@0 {
> > +             compatible = "brcm,nandcs";
> > +             #size-cells = <1>;
> > +             #address-cells = <1>;
> > +             reg = <0>;
> > +             nand-ecc-step-size = <512>;
> > +             nand-ecc-strength = <15>;
> > +             nand-on-flash-bbt;
> > +             brcm,nand-oob-sector-size = <64>;
> > +
> > +             partitions {
> > +                     compatible = "fixed-partitions";
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +
> > +                     partition@0 {
> > +                             label = "cferom";
> > +                             reg = <0x0000000 0x0020000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@20000 {
> > +                             compatible = "brcm,wfi-split";
> > +                             label = "wfi";
> > +                             reg = <0x0020000 0x7ac0000>;
> > +                     };
> > +             };
> > +     };
> > +};
> > +
> > +&uart0 {
> > +     status = "okay";
> > +};
> > diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
> > b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
> > new file mode 100644
> > index 0000000000..5700b3b692
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
> > @@ -0,0 +1,13 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include "bcm6328-sercomm-ad1018.dtsi"
> > +
> > +/ {
> > +     model = "Sercomm AD1018 v1";
> > +     compatible = "sercomm,ad1018", "brcm,bcm6328";
> > +
> > +     memory@0 {
> > +             device_type = "memory";
> > +             reg = <0x00000000 0x04000000>; /* 64 MiB */
> > +     };
> > +};
> > diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
> > b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
> > new file mode 100644
> > index 0000000000..11150af187
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
> > @@ -0,0 +1,13 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include "bcm6328-sercomm-ad1018.dtsi"
> > +
> > +/ {
> > +     model = "Sercomm AD1018 v2";
> > +     compatible = "sercomm,ad1018", "brcm,bcm6328";
> > +
> > +     memory@0 {
> > +             device_type = "memory";
> > +             reg = <0x00000000 0x08000000>; /* 128 MiB */
> > +     };
> > +};
> > diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> > b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> > new file mode 100644
> > index 0000000000..aeaeb74538
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
> > @@ -0,0 +1,222 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include "bcm6328.dtsi"
> > +
> > +/ {
> > +     aliases {
> > +             led-boot = &led_power_green;
> > +             led-failsafe = &led_power_green;
> > +             led-running = &led_power_green;
> > +             led-upgrade = &led_power_green;
> > +     };
> > +
> > +     keys {
> > +             compatible = "gpio-keys-polled";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             poll-interval = <20>;
> > +
> > +             wps {
> > +                     label = "wps";
> > +                     gpios = <&pinctrl 24 1>;
> > +                     linux,code = <KEY_WPS_BUTTON>;
> > +                     debounce-interval = <60>;
> > +             };
> > +
> > +             wifi {
> > +                     label = "wifi";
> > +                     gpios = <&pinctrl 25 1>;
> > +                     linux,code = <KEY_WLAN>;
> > +                     debounce-interval = <60>;
> > +             };
> > +
> > +             reset {
> > +                     label = "reset";
> > +                     gpios = <&pinctrl 31 1>;
> > +                     linux,code = <KEY_RESTART>;
> > +                     debounce-interval = <60>;
> > +             };
> > +     };
> > +};
> > +
> > +&ehci {
> > +     status = "okay";
> > +};
> > +
> > +&ohci {
> > +     status = "okay";
> > +};
> > +
> > +&usbh {
> > +     status = "okay";
> > +};
> > +
> > +&leds {
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
> > +                  &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
> > +                  &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
> > +
> > +     brcm,serial-leds;
> > +     brcm,serial-shift-inv;
> > +     brcm,serial-dat-low;
> > +
> > +     led@0 {
> > +             reg = <0>;
> > +             active-low;
> > +             label = "red:internet";
> > +     };
> > +
> > +     led@1 {
> > +             reg = <1>;
> > +             active-low;
> > +             label = "green:internet";
> > +     };
> > +
> > +     led_power_green: led@8 {
> > +             reg = <8>;
> > +             active-low;
> > +             label = "green:power";
> > +             default-state = "on";
> > +     };
> > +
> > +     led@10 {
> > +             reg = <10>;
> > +             active-low;
> > +             label = "green:adsl";
> > +     };
> > +
> > +     led@11 {
> > +             reg = <11>;
> > +             active-low;
> > +             label = "red:adsl";
> > +     };
> > +
> > +     led@12 {
> > +             reg = <12>;
> > +             active-low;
> > +             label = "green:phone";
> > +     };
> > +
> > +     led@13 {
> > +             reg = <13>;
> > +             active-low;
> > +             label = "green:wps";
> > +     };
> > +
> > +     led@14 {
> > +             reg = <14>;
> > +             active-low;
> > +             label = "green:wifi";
> > +     };
> > +
> > +     led@15 {
> > +             reg = <15>;
> > +             active-low;
> > +             label = "green:usb";
> > +     };
> > +
> > +     led@17 {
> > +             /* EPHY0 Spd */
> > +             reg = <17>;
> > +             brcm,hardware-controlled;
> > +     };
> > +};
> > +
> > +&nflash {
> > +     status = "okay";
> > +
> > +     nandcs@0 {
> > +             compatible = "brcm,nandcs";
> > +             #size-cells = <1>;
> > +             #address-cells = <1>;
> > +             reg = <0>;
> > +             nand-ecc-step-size = <512>;
> > +             nand-ecc-strength = <15>;
> > +             nand-on-flash-bbt;
> > +             brcm,nand-oob-sector-size = <64>;
> > +
> > +             partitions {
> > +                     compatible = "fixed-partitions";
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +
> > +                     partition@0 {
> > +                             label = "cferom";
> > +                             reg = <0x0000000 0x0020000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@20000 {
> > +                             label = "mmap";
> > +                             reg = <0x0020000 0x00a0000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@c0000 {
> > +                             label = "cferam1";
> > +                             reg = <0x00c0000 0x0140000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@200000 {
> > +                             label = "cferam2";
> > +                             reg = <0x0200000 0x0140000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@340000 {
> > +                             label = "serial";
> > +                             reg = <0x0340000 0x00a0000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@3e0000 {
> > +                             label = "protect";
> > +                             reg = <0x03e0000 0x0140000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@6920000 {
> > +                             label = "bootflag1";
> > +                             reg = <0x6920000 0x0140000>;
> > +                     };
> > +
> > +                     partition@6a60000 {
> > +                             label = "bootflag2";
> > +                             reg = <0x6a60000 0x0140000>;
> > +                     };
> > +
> > +                     partition@520000 {
> > +                             compatible = "sercomm,wfi";
> > +                             label = "wfi";
> > +                             reg = <0x0520000 0x6400000>;
> > +                     };
> > +
> > +                     partition@6ba0000 {
> > +                             label = "xml_cfg";
> > +                             reg = <0x6ba0000 0x0280000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@6e20000 {
> > +                             label = "app_dat";
> > +                             reg = <0x6e20000 0x0280000>;
> > +                             read-only;
> > +                     };
> > +             };
> > +     };
> > +};
> > +
> > +&pinctrl {
> > +     pinctrl_leds: leds {
> > +             function = "led";
> > +             pins = "gpio0", "gpio1";
> > +     };
> > +};
> > +
> > +&uart0 {
> > +     status = "okay";
> > +};
> > diff --git a/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> > b/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> > new file mode 100644
> > index 0000000000..eaf83ecc88
> > --- /dev/null
> > +++ b/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
> > @@ -0,0 +1,141 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include "bcm6362.dtsi"
> > +
> > +/ {
> > +     model = "Huawei HG253s v2";
> > +     compatible = "huawei,hg253s-v2", "brcm,bcm6362";
> > +
> > +     aliases {
> > +             led-boot = &led_phone_green;
> > +             led-failsafe = &led_phone_green;
> > +             led-upgrade = &led_phone_green;
> > +     };
> > +
> > +     memory@0 {
> > +             device_type = "memory";
> > +             reg = <0x00000000 0x08000000>; /* 128 MiB */
> > +     };
> > +
> > +     keys {
> > +             compatible = "gpio-keys-polled";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             poll-interval = <20>;
> > +
> > +             reset {
> > +                     label = "reset";
> > +                     gpios = <&pinctrl 24 1>;
> > +                     linux,code = <KEY_RESTART>;
> > +                     debounce-interval = <60>;
> > +             };
> > +
> > +             wlan {
> > +                     label = "wlan";
> > +                     gpios = <&pinctrl 25 1>;
> > +                     linux,code = <KEY_WLAN>;
> > +                     debounce-interval = <60>;
> > +             };
> > +
> > +             wps {
> > +                     label = "wps";
> > +                     gpios = <&pinctrl 26 1>;
> > +                     linux,code = <KEY_WPS_BUTTON>;
> > +                     debounce-interval = <60>;
> > +             };
> > +     };
> > +
> > +     leds {
> > +             compatible = "gpio-leds";
> > +
> > +             led_phone_green: led@28 {
> > +                     label = "green:phone";
> > +                     gpios = <&pinctrl 28 1>;
> > +             };
> > +
> > +             led@30 {
> > +                     label = "green:usb";
> > +                     gpios = <&pinctrl 30 1>;
> > +             };
> > +     };
> > +};
> > +
> > +&ehci {
> > +     status = "okay";
> > +};
> > +
> > +&ohci {
> > +     status = "okay";
> > +};
> > +
> > +&usbh {
> > +     status = "okay";
> > +};
> > +
> > +&leds {
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_leds>;
> > +
> > +     led@3 {
> > +             reg = <3>;
> > +             active-low;
> > +             label = "green:internet";
> > +     };
> > +
> > +     led@5 {
> > +             reg = <5>;
> > +             active-low;
> > +             label = "green:wifi";
> > +     };
> > +};
> > +
> > +&nflash {
> > +     status = "okay";
> > +
> > +     nandcs@0 {
> > +             compatible = "brcm,nandcs";
> > +             #size-cells = <1>;
> > +             #address-cells = <1>;
> > +             reg = <0>;
> > +             nand-ecc-step-size = <512>;
> > +             nand-ecc-strength = <15>;
> > +             nand-on-flash-bbt;
> > +             brcm,nand-oob-sector-size = <64>;
> > +
> > +             partitions {
> > +                     compatible = "fixed-partitions";
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +
> > +                     partition@0 {
> > +                             label = "cferom";
> > +                             reg = <0x0000000 0x0020000>;
> > +                             read-only;
> > +                     };
> > +
> > +                     partition@20000 {
> > +                             compatible = "brcm,wfi";
> > +                             label = "wfi";
> > +                             reg = <0x0020000 0x7d80000>;
> > +                     };
> > +
> > +                     partition@7da0000 {
> > +                             label = "nvram";
> > +                             reg = <0x7da0000 0x160000>;
> > +                     };
> > +             };
> > +     };
> > +};
> > +
> > +&pinctrl {
> > +     pinctrl_leds: leds {
> > +             function = "led";
> > +             pins = "gpio3", "gpio5";
> > +     };
> > +};
> > +
> > +&uart0 {
> > +     status = "okay";
> > +};
> > diff --git a/target/linux/bmips/image/bcm63xx_nand.mk
> > b/target/linux/bmips/image/bcm63xx_nand.mk
> > index a712cd0699..6c63a58640 100644
> > --- a/target/linux/bmips/image/bcm63xx_nand.mk
> > +++ b/target/linux/bmips/image/bcm63xx_nand.mk
> > @@ -41,10 +41,28 @@ define Device/sercomm-nand
> >    IMAGES := factory.img sysupgrade.bin
> >    IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) |
> > append-ubi |\
> >      cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
> > -  SERCOM_PID :=
> > +  SERCOMM_PID :=
> >    SERCOMM_VERSION :=
> >  endef
> >
> > +define Device/comtrend_vg-8050
> > +  $(Device/bcm63xx-nand)
> > +  DEVICE_VENDOR := Comtrend
> > +  DEVICE_MODEL := VG-8050
> > +  CHIP_ID := 63268
> > +  SOC := bcm63169
> > +  CFE_RAM_FILE := comtrend,vg-8050/cferam.000
> > +  CFE_RAM_JFFS2_NAME := cferam.000
> > +  BLOCKSIZE := 128k
> > +  PAGESIZE := 2048
> > +  SUBPAGESIZE := 512
> > +  VID_HDR_OFFSET := 2048
> > +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> > +  CFE_WFI_VERSION := 0x5732
> > +  CFE_WFI_FLASH_TYPE := 3
> > +endef
> > +TARGET_DEVICES += comtrend_vg-8050
> > +
> >  define Device/comtrend_vr-3032u
> >    $(Device/bcm63xx-nand)
> >    DEVICE_VENDOR := Comtrend
> > @@ -63,6 +81,27 @@ define Device/comtrend_vr-3032u  endef
> > TARGET_DEVICES += comtrend_vr-3032u
> >
> > +define Device/huawei_hg253s-v2
> > +  $(Device/bcm63xx-nand)
> > +  IMAGES := flash.bin sysupgrade.bin
> > +  IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |
> > +cfe-jffs2-cferam | append-ubi
> > +  DEVICE_VENDOR := Huawei
> > +  DEVICE_MODEL := HG253s
> > +  DEVICE_VARIANT := v2
> > +  CHIP_ID := 6362
> > +  CFE_PART_FLAGS := 1
> > +  CFE_PART_ID := 0x0001EFEE
> > +  CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
> > +  CFE_RAM_JFFS2_NAME := cferam.000
> > +  BLOCKSIZE := 128k
> > +  PAGESIZE := 2048
> > +  SUBPAGESIZE := 512
> > +  VID_HDR_OFFSET := 2048
> > +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> > +  CFE_WFI_FLASH_TYPE := 3
> > +endef
> > +TARGET_DEVICES += huawei_hg253s-v2
> > +
> >  define Device/netgear_dgnd3700-v2
> >    $(Device/bcm63xx-nand)
> >    DEVICE_VENDOR := NETGEAR
> > @@ -79,3 +118,94 @@ define Device/netgear_dgnd3700-v2
> >    CFE_WFI_VERSION := 0x5731
> >  endef
> >  TARGET_DEVICES += netgear_dgnd3700-v2
> > +
> > +define Device/sercomm_ad1018_v1
> > +  $(Device/sercomm-nand)
> > +  DEVICE_VENDOR := Sercomm
> > +  DEVICE_MODEL := AD1018
> > +  DEVICE_VARIANT := v1
> > +  CHIP_ID := 6328
> > +  CFE_RAM_FILE := sercomm,ad1018/cferam
> > +  CFE_RAM_JFFS2_NAME := cferam
> > +  BLOCKSIZE := 128k
> > +  PAGESIZE := 2048
> > +  SUBPAGESIZE := 512
> > +  VID_HDR_OFFSET := 2048
> > +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> > +  CFE_WFI_FLASH_TYPE := 3
> > +  CFE_WFI_VERSION := 0x5731
> > +  SERCOMM_PID := \
> > +    30 30 30 30 30 30 30 31 34 31 35 31 35 33 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 33 30 31 33 30 30 30 30 30 30 30 30 \
> > +    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > +  SERCOMM_VERSION := 1001
> > +endef
> > +TARGET_DEVICES += sercomm_ad1018_v1
> > +
> > +define Device/sercomm_ad1018_v2
> > +  $(Device/sercomm-nand)
> > +  $(Device/sercomm_ad1018_v1)
> > +  DEVICE_VENDOR := Sercomm
> > +  DEVICE_MODEL := AD1018
> > +  DEVICE_VARIANT := v2
> > +endef
> > +TARGET_DEVICES += sercomm_ad1018_v2
> > +
> > +define Device/sercomm_h500-s-lowi
> > +  $(Device/sercomm-nand)
> > +  DEVICE_VENDOR := Sercomm
> > +  DEVICE_MODEL := H500-s
> > +  DEVICE_VARIANT := lowi
> > +  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
> > +  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
> > +  CHIP_ID := 63268
> > +  SOC := bcm63167
> > +  BLOCKSIZE := 128k
> > +  PAGESIZE := 2048
> > +  SUBPAGESIZE := 512
> > +  VID_HDR_OFFSET := 2048
> > +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> > +  SERCOMM_PID := \
> > +    30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
> > +    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > +  SERCOMM_VERSION := 1001
> > +endef
> > +TARGET_DEVICES += sercomm_h500-s-lowi
> > +
> > +define Device/sercomm_h500-s-vfes
> > +  $(Device/sercomm-nand)
> > +  DEVICE_VENDOR := Sercomm
> > +  DEVICE_MODEL := H500-s
> > +  DEVICE_VARIANT := vfes
> > +  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
> > +  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
> > +  CHIP_ID := 63268
> > +  SOC := bcm63167
> > +  BLOCKSIZE := 128k
> > +  PAGESIZE := 2048
> > +  SUBPAGESIZE := 512
> > +  VID_HDR_OFFSET := 2048
> > +  DEVICE_PACKAGES += $(USB2_PACKAGES)
> > +  SERCOMM_PID := \
> > +    30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
> > +    30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
> > +    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > +  SERCOMM_VERSION := 1001
> > +endef
> > +TARGET_DEVICES += sercomm_h500-s-vfes
> > --
> > 2.30.1
> >
> >
> >
> >
> >
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel@lists.openwrt.org
> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
diff mbox series

Patch

diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
new file mode 100644
index 0000000000..90aa9e1c15
--- /dev/null
+++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-lowi.dts
@@ -0,0 +1,13 @@ 
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s lowi
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+#include "bcm63167-sercomm-h500-s.dtsi"
+
+/ {
+	model = "Sercomm H500-s lowi";
+	compatible = "sercomm,h500-s-lowi", "brcm,bcm63167", "brcm,bcm63268";
+};
diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
new file mode 100644
index 0000000000..bd69ccd316
--- /dev/null
+++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s-vfes.dts
@@ -0,0 +1,13 @@ 
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s vfes
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+ 
+#include "bcm63167-sercomm-h500-s.dtsi"
+
+/ {
+	model = "Sercomm H500-s vfes";
+	compatible = "sercomm,h500-s-vfes", "brcm,bcm63167", "brcm,bcm63268";
+};
diff --git a/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi b/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
new file mode 100644
index 0000000000..f9fe6fe40c
--- /dev/null
+++ b/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
@@ -0,0 +1,204 @@ 
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+#include "bcm63268.dtsi"
+
+/ {
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MiB */
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 34 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 35 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_leds>;
+
+	mobile_red {
+		reg = <0>;
+		label = "red:mobile";
+	};
+
+	mobile_green {
+		reg = <1>;
+		label = "green:mobile";
+	};
+
+	led_power_red: power_red {
+		reg = <8>;
+		label = "red:power";
+	};
+
+	wifi_green {
+		reg = <9>;
+		label = "green:wifi";
+	};
+
+	phone_red {
+		reg = <12>;
+		label = "red:phone";
+	};
+
+	wifi_red {
+		reg = <13>;
+		label = "red:wifi";
+	};
+
+	internet_red {
+		reg = <14>;
+		label = "red:internet";
+	};
+
+	internet_green {
+		reg = <15>;
+		label = "green:internet";
+	};
+
+	phone_green {
+		reg = <16>;
+		label = "green:phone";
+	};
+
+	led_power_green: power_green {
+		reg = <17>;
+		label = "green:power";
+		default-state = "on";
+	};
+
+	mobile_blue {
+		reg = <23>;
+		label = "blue:mobile";
+	};
+};
+
+&nflash {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		#size-cells = <1>;
+		#address-cells = <1>;
+		reg = <0>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <4>;
+		nand-on-flash-bbt;
+		brcm,nand-oob-sector-size = <64>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "cferom";
+				reg = <0x0000000 0x0020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "part_map";
+				reg = <0x0020000 0x00a0000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "cferam1";
+				reg = <0x00c0000 0x0140000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "cferam2";
+				reg = <0x0200000 0x0140000>;
+				read-only;
+			};
+
+			partition@6920000 {
+				label = "bootflag1";
+				reg = <0x6920000 0x0140000>;
+			};
+
+			partition@6a60000 {
+				label = "bootflag2";
+				reg = <0x6a60000 0x0140000>;
+			};
+
+			partition@520000 {
+				compatible = "sercomm,wfi";
+				label = "wfi";
+				reg = <0x0520000 0x6400000>; /* 2 images, 97152 KiB */
+			};
+
+			partition@6ba0000 {
+				label = "xml_cfg";
+				reg = <0x6ba0000 0x0280000>;
+				read-only;
+			};
+
+			partition@6e20000 {
+				label = "app_data";
+				reg = <0x6e20000 0x0280000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio0",  "gpio1",  "gpio8",  "gpio9",
+		       "gpio12", "gpio13", "gpio14", "gpio15",
+		       "gpio16", "gpio17", "gpio23";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
new file mode 100644
index 0000000000..481674f6a2
--- /dev/null
+++ b/target/linux/bmips/dts/bcm63169-comtrend-vg-8050.dts
@@ -0,0 +1,149 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm63268.dtsi"
+
+/ {
+	model = "Comtrend VG-8050";
+	compatible = "comtrend,vg-8050", "brcm,bcm63169", "brcm,bcm63268";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MiB */
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 33 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 34 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_serial_led>;
+
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "red:internet";
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "red:power";
+	};
+
+	led_power_green: led@6 {
+		reg = <6>;
+		active-low;
+		label = "green:power";
+		default-state = "on";
+	};
+
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "green:wps";
+	};
+
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "green:internet";
+	};
+
+	led@10 {
+		reg = <10>;
+		active-low;
+		label = "green:voip";
+	};
+
+	led@12 {
+		reg = <12>;
+		active-low;
+		label = "red:voip";
+	};
+
+	led@14 {
+		reg = <14>;
+		active-low;
+		label = "red:wps";
+	};
+};
+
+&nflash {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		#size-cells = <1>;
+		#address-cells = <1>;
+		reg = <0>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <15>;
+		nand-on-flash-bbt;
+		brcm,nand-oob-sector-size = <64>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "cferom";
+				reg = <0x0000000 0x0020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "brcm,wfi-split";
+				label = "wfi";
+				reg = <0x0020000 0x7ac0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
new file mode 100644
index 0000000000..5700b3b692
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v1.dts
@@ -0,0 +1,13 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328-sercomm-ad1018.dtsi"
+
+/ {
+	model = "Sercomm AD1018 v1";
+	compatible = "sercomm,ad1018", "brcm,bcm6328";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>; /* 64 MiB */
+	};
+};
diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
new file mode 100644
index 0000000000..11150af187
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018-v2.dts
@@ -0,0 +1,13 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328-sercomm-ad1018.dtsi"
+
+/ {
+	model = "Sercomm AD1018 v2";
+	compatible = "sercomm,ad1018", "brcm,bcm6328";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MiB */
+	};
+};
diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
new file mode 100644
index 0000000000..aeaeb74538
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dtsi
@@ -0,0 +1,222 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 24 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&pinctrl 25 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 31 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
+		     &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
+		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+
+	brcm,serial-leds;
+	brcm,serial-shift-inv;
+	brcm,serial-dat-low;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "red:internet";
+	};
+
+	led@1 {
+		reg = <1>;
+		active-low;
+		label = "green:internet";
+	};
+
+	led_power_green: led@8 {
+		reg = <8>;
+		active-low;
+		label = "green:power";
+		default-state = "on";
+	};
+
+	led@10 {
+		reg = <10>;
+		active-low;
+		label = "green:adsl";
+	};
+
+	led@11 {
+		reg = <11>;
+		active-low;
+		label = "red:adsl";
+	};
+
+	led@12 {
+		reg = <12>;
+		active-low;
+		label = "green:phone";
+	};
+
+	led@13 {
+		reg = <13>;
+		active-low;
+		label = "green:wps";
+	};
+
+	led@14 {
+		reg = <14>;
+		active-low;
+		label = "green:wifi";
+	};
+
+	led@15 {
+		reg = <15>;
+		active-low;
+		label = "green:usb";
+	};
+
+	led@17 {
+		/* EPHY0 Spd */
+		reg = <17>;
+		brcm,hardware-controlled;
+	};
+};
+
+&nflash {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		#size-cells = <1>;
+		#address-cells = <1>;
+		reg = <0>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <15>;
+		nand-on-flash-bbt;
+		brcm,nand-oob-sector-size = <64>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "cferom";
+				reg = <0x0000000 0x0020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "mmap";
+				reg = <0x0020000 0x00a0000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "cferam1";
+				reg = <0x00c0000 0x0140000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "cferam2";
+				reg = <0x0200000 0x0140000>;
+				read-only;
+			};
+
+			partition@340000 {
+				label = "serial";
+				reg = <0x0340000 0x00a0000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "protect";
+				reg = <0x03e0000 0x0140000>;
+				read-only;
+			};
+
+			partition@6920000 {
+				label = "bootflag1";
+				reg = <0x6920000 0x0140000>;
+			};
+
+			partition@6a60000 {
+				label = "bootflag2";
+				reg = <0x6a60000 0x0140000>;
+			};
+
+			partition@520000 {
+				compatible = "sercomm,wfi";
+				label = "wfi";
+				reg = <0x0520000 0x6400000>;
+			};
+
+			partition@6ba0000 {
+				label = "xml_cfg";
+				reg = <0x6ba0000 0x0280000>;
+				read-only;
+			};
+
+			partition@6e20000 {
+				label = "app_dat";
+				reg = <0x6e20000 0x0280000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio0", "gpio1";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts b/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
new file mode 100644
index 0000000000..eaf83ecc88
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6362-huawei-hg253s-v2.dts
@@ -0,0 +1,141 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6362.dtsi"
+
+/ {
+	model = "Huawei HG253s v2";
+	compatible = "huawei,hg253s-v2", "brcm,bcm6362";
+
+	aliases {
+		led-boot = &led_phone_green;
+		led-failsafe = &led_phone_green;
+		led-upgrade = &led_phone_green;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MiB */
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 24 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&pinctrl 25 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 26 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_phone_green: led@28 {
+			label = "green:phone";
+			gpios = <&pinctrl 28 1>;
+		};
+
+		led@30 {
+			label = "green:usb";
+			gpios = <&pinctrl 30 1>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_leds>;
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "green:internet";
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		label = "green:wifi";
+	};
+};
+
+&nflash {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		#size-cells = <1>;
+		#address-cells = <1>;
+		reg = <0>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <15>;
+		nand-on-flash-bbt;
+		brcm,nand-oob-sector-size = <64>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "cferom";
+				reg = <0x0000000 0x0020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "brcm,wfi";
+				label = "wfi";
+				reg = <0x0020000 0x7d80000>;
+			};
+
+			partition@7da0000 {
+				label = "nvram";
+				reg = <0x7da0000 0x160000>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl_leds: leds {
+		function = "led";
+		pins = "gpio3", "gpio5";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/target/linux/bmips/image/bcm63xx_nand.mk b/target/linux/bmips/image/bcm63xx_nand.mk
index a712cd0699..6c63a58640 100644
--- a/target/linux/bmips/image/bcm63xx_nand.mk
+++ b/target/linux/bmips/image/bcm63xx_nand.mk
@@ -41,10 +41,28 @@  define Device/sercomm-nand
   IMAGES := factory.img sysupgrade.bin
   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi |\
     cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
-  SERCOM_PID :=
+  SERCOMM_PID :=
   SERCOMM_VERSION :=
 endef
 
+define Device/comtrend_vg-8050
+  $(Device/bcm63xx-nand)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VG-8050
+  CHIP_ID := 63268
+  SOC := bcm63169
+  CFE_RAM_FILE := comtrend,vg-8050/cferam.000
+  CFE_RAM_JFFS2_NAME := cferam.000
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES)
+  CFE_WFI_VERSION := 0x5732
+  CFE_WFI_FLASH_TYPE := 3
+endef
+TARGET_DEVICES += comtrend_vg-8050
+
 define Device/comtrend_vr-3032u
   $(Device/bcm63xx-nand)
   DEVICE_VENDOR := Comtrend
@@ -63,6 +81,27 @@  define Device/comtrend_vr-3032u
 endef
 TARGET_DEVICES += comtrend_vr-3032u
 
+define Device/huawei_hg253s-v2
+  $(Device/bcm63xx-nand)
+  IMAGES := flash.bin sysupgrade.bin
+  IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := HG253s
+  DEVICE_VARIANT := v2
+  CHIP_ID := 6362
+  CFE_PART_FLAGS := 1
+  CFE_PART_ID := 0x0001EFEE
+  CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
+  CFE_RAM_JFFS2_NAME := cferam.000
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES)
+  CFE_WFI_FLASH_TYPE := 3
+endef
+TARGET_DEVICES += huawei_hg253s-v2
+
 define Device/netgear_dgnd3700-v2
   $(Device/bcm63xx-nand)
   DEVICE_VENDOR := NETGEAR
@@ -79,3 +118,94 @@  define Device/netgear_dgnd3700-v2
   CFE_WFI_VERSION := 0x5731
 endef
 TARGET_DEVICES += netgear_dgnd3700-v2
+
+define Device/sercomm_ad1018_v1
+  $(Device/sercomm-nand)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := AD1018
+  DEVICE_VARIANT := v1
+  CHIP_ID := 6328
+  CFE_RAM_FILE := sercomm,ad1018/cferam
+  CFE_RAM_JFFS2_NAME := cferam
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES)
+  CFE_WFI_FLASH_TYPE := 3
+  CFE_WFI_VERSION := 0x5731
+  SERCOMM_PID := \
+    30 30 30 30 30 30 30 31 34 31 35 31 35 33 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 33 30 31 33 30 30 30 30 30 30 30 30 \
+    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+  SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_ad1018_v1
+
+define Device/sercomm_ad1018_v2
+  $(Device/sercomm-nand)
+  $(Device/sercomm_ad1018_v1)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := AD1018
+  DEVICE_VARIANT := v2
+endef
+TARGET_DEVICES += sercomm_ad1018_v2
+
+define Device/sercomm_h500-s-lowi
+  $(Device/sercomm-nand)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := H500-s
+  DEVICE_VARIANT := lowi
+  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+  CHIP_ID := 63268
+  SOC := bcm63167
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES)
+  SERCOMM_PID := \
+    30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
+    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+  SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_h500-s-lowi
+
+define Device/sercomm_h500-s-vfes
+  $(Device/sercomm-nand)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := H500-s
+  DEVICE_VARIANT := vfes
+  DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+  KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+  CHIP_ID := 63268
+  SOC := bcm63167
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  SUBPAGESIZE := 512
+  VID_HDR_OFFSET := 2048
+  DEVICE_PACKAGES += $(USB2_PACKAGES)
+  SERCOMM_PID := \
+    30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+    30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
+    0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+  SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_h500-s-vfes